November 2014 - openSUSE Commits - openSUSE Mailing Lists

commit yast2-network for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package yast2-network for openSUSE:Factory checked in at 2014-11-24 11:17:37 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/yast2-network (Old) and /work/SRC/openSUSE:Factory/.yast2-network.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "yast2-network" Changes: -------- --- /work/SRC/openSUSE:Factory/yast2-network/yast2-network.changes 2014-10-02 14:13:38.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.yast2-network.new/yast2-network.changes 2014-11-24 11:18:04.000000000 +0100 @@ -1,0 +2,37 @@ +Fri Oct 17 07:45:24 UTC 2014 - mfilka(a)suse.com + +- bnc#898250, bnc#899363 + - ignore /etc/install.inf:usessh flag when the file is present in + installed system and always reload / restart network service in + case of updated configuration +- 3.1.109 + +------------------------------------------------------------------- +Thu Oct 10 17:10:42 CEST 2014 - schubi(a)suse.de + +- AutoYaST Routing Import: Initialize device list correctly. + (bnc#900352) +- 3.1.108 + +------------------------------------------------------------------- +Fri Oct 10 15:20:36 CEST 2014 - locilka(a)suse.com + +- Do not set default_route to "no" in auto-configuration in + inst-sys, just remove the entry completely (bnc#900466) +- 3.1.107 + +------------------------------------------------------------------- +Thu Oct 9 15:47:14 UTC 2014 - ancor(a)suse.com + +- Improved help text in "global options" (bnc#892678) +- 3.1.106 + +------------------------------------------------------------------- +Mon Oct 6 09:31:41 UTC 2014 - mfilka(a)suse.com + +- bnc#889287 + - during autoconfiguration at s390 use linuxrc's OSAHWAddr param + for LLADDR when available. +- 3.1.105 + +------------------------------------------------------------------- Old: ---- yast2-network-3.1.104.tar.bz2 New: ---- yast2-network-3.1.109.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-network.spec ++++++ --- /var/tmp/diff_new_pack.N4EA7p/_old 2014-11-24 11:18:05.000000000 +0100 +++ /var/tmp/diff_new_pack.N4EA7p/_new 2014-11-24 11:18:05.000000000 +0100 @@ -17,7 +17,7 @@ Name: yast2-network -Version: 3.1.104 +Version: 3.1.109 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build ++++++ yast2-network-3.1.104.tar.bz2 -> yast2-network-3.1.109.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/.travis.yml new/yast2-network-3.1.109/.travis.yml --- old/yast2-network-3.1.104/.travis.yml 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-network-3.1.109/.travis.yml 2014-11-18 09:17:13.000000000 +0100 @@ -0,0 +1,16 @@ +language: cpp +compiler: + - gcc +before_install: + # disable rvm, use system Ruby + - rvm reset + - wget https://raw.githubusercontent.com/yast/yast-devtools/master/travis-tools/tr… + - sh ./travis_setup.sh -p "rake yast2-devtools yast2-testsuite yast2 yast2-storage yast2-proxy yast2-country yast2-packager" -g "rspec:2.14.1 yast-rake gettext" +script: + - rake check:syntax + - rake check:pot + - make -f Makefile.cvs + - make + - sudo make install + - make check + diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/README.md new/yast2-network-3.1.109/README.md --- old/yast2-network-3.1.104/README.md 2014-10-01 17:02:11.000000000 +0200 +++ new/yast2-network-3.1.109/README.md 2014-11-18 09:17:13.000000000 +0100 @@ -1,6 +1,10 @@ YaST Network Module ====================== +[![Travis Build](https://travis-ci.org/yast/yast-network.svg?branch=master)](https://… +[![Jenkins Build](http://img.shields.io/jenkins/s/https/ci.opensuse.org/yast-network-m… +[![Code Climate](https://codeclimate.com/github/yast/yast-network/badges/gpa.svg)](… + The YaST2 Network module manages network configuration including device configuration, DNS, Routing and more @@ -15,8 +19,6 @@ Some features are SuSE Linux specific. -[![Code Climate](https://codeclimate.com/github/yast/yast-network.png)](https://cod… - Installation ------------ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/package/yast2-network.changes new/yast2-network-3.1.109/package/yast2-network.changes --- old/yast2-network-3.1.104/package/yast2-network.changes 2014-10-01 17:02:11.000000000 +0200 +++ new/yast2-network-3.1.109/package/yast2-network.changes 2014-11-18 09:17:13.000000000 +0100 @@ -1,4 +1,41 @@ ------------------------------------------------------------------- +Fri Oct 17 07:45:24 UTC 2014 - mfilka(a)suse.com + +- bnc#898250, bnc#899363 + - ignore /etc/install.inf:usessh flag when the file is present in + installed system and always reload / restart network service in + case of updated configuration +- 3.1.109 + +------------------------------------------------------------------- +Thu Oct 10 17:10:42 CEST 2014 - schubi(a)suse.de + +- AutoYaST Routing Import: Initialize device list correctly. + (bnc#900352) +- 3.1.108 + +------------------------------------------------------------------- +Fri Oct 10 15:20:36 CEST 2014 - locilka(a)suse.com + +- Do not set default_route to "no" in auto-configuration in + inst-sys, just remove the entry completely (bnc#900466) +- 3.1.107 + +------------------------------------------------------------------- +Thu Oct 9 15:47:14 UTC 2014 - ancor(a)suse.com + +- Improved help text in "global options" (bnc#892678) +- 3.1.106 + +------------------------------------------------------------------- +Mon Oct 6 09:31:41 UTC 2014 - mfilka(a)suse.com + +- bnc#889287 + - during autoconfiguration at s390 use linuxrc's OSAHWAddr param + for LLADDR when available. +- 3.1.105 + +------------------------------------------------------------------- Tue Sep 30 10:15:38 UTC 2014 - ancor(a)suse.com - The "change hostname via DHCP" setting is now configurable via diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/package/yast2-network.spec new/yast2-network-3.1.109/package/yast2-network.spec --- old/yast2-network-3.1.104/package/yast2-network.spec 2014-10-01 17:02:11.000000000 +0200 +++ new/yast2-network-3.1.109/package/yast2-network.spec 2014-11-18 09:17:13.000000000 +0100 @@ -17,7 +17,7 @@ Name: yast2-network -Version: 3.1.104 +Version: 3.1.109 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/src/include/network/lan/help.rb new/yast2-network-3.1.109/src/include/network/lan/help.rb --- old/yast2-network-3.1.104/src/include/network/lan/help.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/src/include/network/lan/help.rb 2014-11-18 09:17:13.000000000 +0100 @@ -47,18 +47,23 @@ ), "managed" => # Network setup method help - # NetworkManager and ifup are programs + # NetworkManager and wicked are programs _( "<big>Network Setup Method</big>\n" + "Use the NetworkManager as a desktop applet\n" + "managing connections for all interfaces. It is well suited\n" + "for switching among wired and wireless networks.\n" ) + - # Network setup method help - # NetworkManager and wicked are programs _( "Use wicked if you do not run a desktop environment\n" + "or need to use multiple interfaces at the same time.\n" + ) + + # For systems not including NetworkManager by default (bnc#892678) + _( + "NetworkManager is not part of every base\n" + + "installation repository. For example, to enable it on SUSE\n" + + "Linux Enterprise Server add the Workstation Extension\n" + + "repository and install the 'NetworkManager' package.\n" ), "overview" => _( "<big>Network Card Overview</big> \n" + diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/src/lib/network/install_inf_convertor.rb new/yast2-network-3.1.109/src/lib/network/install_inf_convertor.rb --- old/yast2-network-3.1.104/src/lib/network/install_inf_convertor.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/src/lib/network/install_inf_convertor.rb 2014-11-18 09:17:13.000000000 +0100 @@ -346,7 +346,7 @@ end def create_s390_ifcfg(hardware) - hwaddr = InstallInf["HWAddr"] + hwaddr = InstallInf["OSAHWAddr"] return "" if hwaddr.empty? netdevice = dev_name diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/src/lib/network/network_autoconfiguration.rb new/yast2-network-3.1.109/src/lib/network/network_autoconfiguration.rb --- old/yast2-network-3.1.104/src/lib/network/network_autoconfiguration.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/src/lib/network/network_autoconfiguration.rb 2014-11-18 09:17:13.000000000 +0100 @@ -206,7 +206,7 @@ set_default_route_flag(devname, "yes") if !activate_changes([devname]) - log.warn("Cannot reach reference server via #{devname}") + log.warn("Cannot activate default_route for device #{devname}") return false end @@ -218,7 +218,10 @@ log.info("Release notes can be reached via #{devname}: #{reached}") if !reached - set_default_route_flag(devname, "no") + # bsc#900466: Device is currently used for default route, but the test + # did not work, removing the default_route flag completely. + log.info "Removing default_route flag for device #{devname}" + set_default_route_flag(devname, nil) activate_changes([devname]) end diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/src/modules/Lan.rb new/yast2-network-3.1.109/src/modules/Lan.rb --- old/yast2-network-3.1.104/src/modules/Lan.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/src/modules/Lan.rb 2014-11-18 09:17:13.000000000 +0100 @@ -614,14 +614,8 @@ ) end - if LanItems.force_restart - NetworkService.Restart - else - # If the second installation stage has been called by yast.ssh via - # ssh, we should not restart network cause systemctl - # hangs in that case. (bnc#885640) - NetworkService.ReloadOrRestart if !Linuxrc.usessh - end + activate_network_service + Builtins.sleep(sl) end @@ -1153,6 +1147,24 @@ publish :function => :Packages, :type => "list <string> ()" publish :function => :AutoPackages, :type => "map ()" publish :function => :HaveXenBridge, :type => "boolean ()" + + private + def activate_network_service + if LanItems.force_restart + log.info("Network service activation forced") + NetworkService.Restart + else + log.info( + ("Attempting to reload network service, normal stage %s, ssh: %s") % + [Stage.normal, Linuxrc.usessh] + ) + # If the second installation stage has been called by yast.ssh via + # ssh, we should not restart network cause systemctl + # hangs in that case. (bnc#885640) + NetworkService.ReloadOrRestart if Stage.normal || !Linuxrc.usessh + end + end + end Lan = LanClass.new diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/src/modules/Routing.rb new/yast2-network-3.1.109/src/modules/Routing.rb --- old/yast2-network-3.1.104/src/modules/Routing.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/src/modules/Routing.rb 2014-11-18 09:17:13.000000000 +0100 @@ -337,6 +337,11 @@ # @return true if success def Import(settings) settings = deep_copy(settings) + + # Getting a list of devices which have already been imported by Lan.Import + # (bnc#900352) + @devices = NetworkInterfaces.List("") + ip_forward = Ops.get_boolean(settings, "ip_forward", false) ipv4_forward = Ops.get_boolean(settings, "ipv4_forward", ip_forward) ipv6_forward = Ops.get_boolean(settings, "ipv6_forward", ip_forward) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/test/ifroute_test.rb new/yast2-network-3.1.109/test/ifroute_test.rb --- old/yast2-network-3.1.104/test/ifroute_test.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/test/ifroute_test.rb 2014-11-18 09:17:14.000000000 +0100 @@ -128,3 +128,55 @@ expect(Routing.write_routes(ROUTES_WITH_DEV)).to be true end end + +describe "Routing#Write" do + AY_ROUTES = [ + # empty AY config + {}, + # some routes + { + "routes" => [ + { + "destination" => "192.168.1.0", + "device" => "eth0", + "gateway" => "10.1.188.1", + "netmask" => "255.255.255.0" + }, + { + "destination" => "10.1.230.0", + "device" => "eth0", + "gateway" => "10.1.18.254", + "netmask" => "255.255.255.0" + }, + { + "destination" => "default", + "device" => "eth0", + "gateway" => "172.24.88.1", + "netmask" => "-" + }, + ] + } + ] + + AY_ROUTES.each_with_index do |ay_test, i| + it "does write route configuration files, ##{i}" do + # Devices which have already been imported by Lan.Import have to be read. + # (bnc#900352) + allow(NetworkInterfaces). + to receive(:List). + with(""). + and_return(["eth0"]) + + Routing.Import(ay_test) + + expect(Routing). + to receive(:write_route_file). + twice. + with(kind_of(String), ay_test.fetch("routes", [])). + and_return true + + Routing.Write + end + end + +end diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/test/install_inf_convertor_test.rb new/yast2-network-3.1.109/test/install_inf_convertor_test.rb --- old/yast2-network-3.1.104/test/install_inf_convertor_test.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/test/install_inf_convertor_test.rb 2014-11-18 09:17:14.000000000 +0100 @@ -283,7 +283,7 @@ expect(Yast::InstallInfConvertor::InstallInf) .to receive(:[]) - .with("HWAddr") + .with("OSAHWAddr") .and_return(HWADDR) expect(Yast::InstallInfConvertor.instance.send(:create_s390_ifcfg, nil).strip!) .to eql ("LLADDR='#{HWADDR}'") diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/test/lan_test.rb new/yast2-network-3.1.109/test/lan_test.rb --- old/yast2-network-3.1.104/test/lan_test.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/test/lan_test.rb 2014-11-18 09:17:14.000000000 +0100 @@ -84,3 +84,56 @@ end end + +describe "LanClass#activate_network_service" do + + Yast.import "Stage" + Yast.import "NetworkService" + + [0, 1].each do |linuxrc_usessh| + ssh_flag = linuxrc_usessh != 0 + + context "when linuxrc %s usessh flag" % ssh_flag ? "sets" : "doesn't set" do + before(:each) do + allow(Yast::Linuxrc) + .to receive(:usessh) + .and_return(ssh_flag) + end + + context "when asked in normal mode" do + before(:each) do + allow(Yast::Stage) + .to receive(:normal) + .and_return(true) + end + + it "tries to reload network service" do + expect(Yast::NetworkService) + .to receive(:ReloadOrRestart) + + Yast::Lan.send(:activate_network_service) + end + end + + context "when asked during installation" do + before(:each) do + allow(Yast::Stage) + .to receive(:normal) + .and_return(false) + end + + it "updates network service according usessh flag" do + if ssh_flag + expect(Yast::NetworkService) + .not_to receive(:ReloadOrRestart) + else + expect(Yast::NetworkService) + .to receive(:ReloadOrRestart) + end + + Yast::Lan.send(:activate_network_service) + end + end + end + end +end diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/test/network_autoconfiguration_test.rb new/yast2-network-3.1.109/test/network_autoconfiguration_test.rb --- old/yast2-network-3.1.104/test/network_autoconfiguration_test.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/test/network_autoconfiguration_test.rb 2014-11-18 09:17:14.000000000 +0100 @@ -171,7 +171,7 @@ it "configures just one NIC to have a default route" do expect { instance.configure_dhcp }.to_not raise_error result = Yast::NetworkInterfaces.FilterDevices("") - expect(result["eth"]["eth0"]["DHCLIENT_SET_DEFAULT_ROUTE"]).to eq "yes" - expect(result["eth"]["eth1"]["DHCLIENT_SET_DEFAULT_ROUTE"]).to_not eq "yes" + expect(result["eth"]["eth0"]["DHCLIENT_SET_DEFAULT_ROUTE"]).to eq "yes" + expect(result["eth"]["eth1"]["DHCLIENT_SET_DEFAULT_ROUTE"]).to eq nil end end diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/test/new_device_startmode_test.rb new/yast2-network-3.1.109/test/new_device_startmode_test.rb --- old/yast2-network-3.1.104/test/new_device_startmode_test.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/test/new_device_startmode_test.rb 2014-11-18 09:17:14.000000000 +0100 @@ -1,4 +1,4 @@ -#!rspec +#!/usr/bin/env rspec require_relative "test_helper" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-network-3.1.104/test/routing_test.rb new/yast2-network-3.1.109/test/routing_test.rb --- old/yast2-network-3.1.104/test/routing_test.rb 2014-10-01 17:02:12.000000000 +0200 +++ new/yast2-network-3.1.109/test/routing_test.rb 2014-11-18 09:17:14.000000000 +0100 @@ -242,9 +242,9 @@ exported = Routing.Export expect(exported["ipv4_forward"]) - .to be_equal(ay_test["ipv4_forward"]) if ay_test.has_key?("ipv4_forward") + .to eql(ay_test[:input]["ipv4_forward"]) if ay_test[:input].has_key?("ipv4_forward") expect(exported["ipv6_forward"]) - .to be_equal(ay_test["ipv6_forward"]) if ay_test.has_key?("ipv6_forward") + .to eql(ay_test[:input]["ipv6_forward"]) if ay_test[:input].has_key?("ipv6_forward") end end end -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit duplicity for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package duplicity for openSUSE:Factory checked in at 2014-11-24 11:17:36 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/duplicity (Old) and /work/SRC/openSUSE:Factory/.duplicity.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "duplicity" Changes: -------- --- /work/SRC/openSUSE:Factory/duplicity/duplicity.changes 2014-07-18 06:41:00.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.duplicity.new/duplicity.changes 2014-11-24 11:18:02.000000000 +0100 @@ -1,0 +2,8 @@ +Sun Nov 9 17:40:47 UTC 2014 - wr(a)rosenauer.org + +- Update to version 0.7.0 + * see details here + http://duplicity.nongnu.org/CHANGELOG +- updated duplicity-remove_shebang.patch + +------------------------------------------------------------------- Old: ---- duplicity-0.6.24.tar.gz New: ---- duplicity-0.7.0.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ duplicity.spec ++++++ --- /var/tmp/diff_new_pack.YsIGPP/_old 2014-11-24 11:18:03.000000000 +0100 +++ /var/tmp/diff_new_pack.YsIGPP/_new 2014-11-24 11:18:03.000000000 +0100 @@ -30,10 +30,10 @@ Summary: Encrypted bandwidth-efficient backup using the rsync algorithm License: GPL-3.0+ Group: Productivity/Archiving/Backup -Version: 0.6.24 +Version: 0.7.0 Release: 0 Url: http://duplicity.nongnu.org/ -Source: http://code.launchpad.net/%{name}/0.6-series/%{version}/+download/%{name}-%… +Source: https://code.launchpad.net/%{name}/0.7-series/0.7.00/+download/%{name}-%{ve… Source99: duplicity-rpmlintrc Patch1: duplicity-remove_shebang.patch Requires: gpg ++++++ duplicity-0.6.24.tar.gz -> duplicity-0.7.0.tar.gz ++++++ ++++ 17121 lines of diff (skipped) ++++++ duplicity-remove_shebang.patch ++++++ --- /var/tmp/diff_new_pack.YsIGPP/_old 2014-11-24 11:18:03.000000000 +0100 +++ /var/tmp/diff_new_pack.YsIGPP/_new 2014-11-24 11:18:03.000000000 +0100 @@ -1,18 +1,9 @@ diff --git a/duplicity/compilec.py b/duplicity/compilec.py -index 1176dc2..4577c28 100755 +index 62f9541..c0f63c7 100755 --- a/duplicity/compilec.py +++ b/duplicity/compilec.py @@ -1,4 +1,3 @@ --#!/usr/bin/env python +-#!/usr/bin/env python2 # -*- Mode:Python; indent-tabs-mode:nil; tab-width:4 -*- # # Copyright 2002 Ben Escoto <ben(a)emerose.org> -diff --git a/duplicity/tarfile.py b/duplicity/tarfile.py -index ac93412..98fb4be 100644 ---- a/duplicity/tarfile.py -+++ b/duplicity/tarfile.py -@@ -1,4 +1,3 @@ --#! /usr/bin/python2.7 - # -*- coding: iso-8859-1 -*- - #------------------------------------------------------------------- - # tarfile.py -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit alsa for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package alsa for openSUSE:Factory checked in at 2014-11-24 11:17:35 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/alsa (Old) and /work/SRC/openSUSE:Factory/.alsa.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "alsa" Changes: -------- --- /work/SRC/openSUSE:Factory/alsa/alsa.changes 2014-10-25 08:32:57.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.alsa.new/alsa.changes 2014-11-24 11:18:01.000000000 +0100 @@ -1,0 +2,5 @@ +Sun Nov 16 18:10:00 UTC 2014 - Led <ledest(a)gmail.com> + +- fix bashism in alsa-init.sh scripts + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ alsa-init.sh ++++++ --- /var/tmp/diff_new_pack.mW5BeK/_old 2014-11-24 11:18:02.000000000 +0100 +++ /var/tmp/diff_new_pack.mW5BeK/_new 2014-11-24 11:18:02.000000000 +0100 @@ -5,10 +5,8 @@ test -s /var/lib/alsa/asound.state && /usr/sbin/alsactl -F restore $1 >/dev/null 2>&1 # increase buffer-preallocation size (for PA) if [ -f /proc/asound/card$1/pcm0p/sub0/prealloc_max ]; then - pmax=$(< /proc/asound/card$1/pcm0p/sub0/prealloc_max) - if [ $pmax -gt 1024 ]; then + [ $(cat /proc/asound/card$1/pcm0p/sub0/prealloc_max) -le 1024 ] || echo 1024 > /proc/asound/card$1/pcm0p/sub0/prealloc - fi fi exit 0 -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit libreoffice for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package libreoffice for openSUSE:Factory checked in at 2014-11-24 11:17:33 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libreoffice (Old) and /work/SRC/openSUSE:Factory/.libreoffice.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "libreoffice" Changes: -------- --- /work/SRC/openSUSE:Factory/libreoffice/libreoffice.changes 2014-11-06 16:50:13.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.libreoffice.new/libreoffice.changes 2014-11-24 11:17:48.000000000 +0100 @@ -1,0 +2,7 @@ +Mon Nov 17 11:08:24 UTC 2014 - tchvatal(a)suse.com + +- Version bump to 4.3.4: + * Few small fixes + * Fix for calc value ordering "regression" + +------------------------------------------------------------------- Old: ---- libreoffice-4.3.3.2.tar.xz libreoffice-help-4.3.3.2.tar.xz libreoffice-translations-4.3.3.2.tar.xz New: ---- libreoffice-4.3.4.1.tar.xz libreoffice-help-4.3.4.1.tar.xz libreoffice-translations-4.3.4.1.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libreoffice.spec ++++++ --- /var/tmp/diff_new_pack.9wEIPM/_old 2014-11-24 11:17:59.000000000 +0100 +++ /var/tmp/diff_new_pack.9wEIPM/_new 2014-11-24 11:17:59.000000000 +0100 @@ -29,10 +29,10 @@ %define numbertext_version 0.9.5 # Urls %define external_url http://dev-www.libreoffice.org/src/ -%define tarball_url http://download.documentfoundation.org/libreoffice/src/4.3.3/ +%define tarball_url http://download.documentfoundation.org/libreoffice/src/4.3.4 # This is used due to the need for beta releases Name: libreoffice -Version: 4.3.3.2 +Version: 4.3.4.1 Release: 0 Summary: A Free Office Suite (Framework) License: Apache-2.0 and Artistic-1.0 and BSD-3-Clause and BSD-4-Clause and GPL-2.0+ and LPPL-1.3c and LGPL-2.1+ and LGPL-3.0 and MPL-1.1 and MIT and SUSE-Public-Domain and W3C ++++++ libreoffice-4.3.3.2.tar.xz -> libreoffice-4.3.4.1.tar.xz ++++++ /work/SRC/openSUSE:Factory/libreoffice/libreoffice-4.3.3.2.tar.xz /work/SRC/openSUSE:Factory/.libreoffice.new/libreoffice-4.3.4.1.tar.xz differ: char 26, line 1 ++++++ libreoffice-help-4.3.3.2.tar.xz -> libreoffice-help-4.3.4.1.tar.xz ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/libreoffice-4.3.3.2/ChangeLog-helpcontent2 new/libreoffice-4.3.4.1/ChangeLog-helpcontent2 --- old/libreoffice-4.3.3.2/ChangeLog-helpcontent2 2014-10-23 13:46:37.000000000 +0200 +++ new/libreoffice-4.3.4.1/ChangeLog-helpcontent2 2014-11-10 13:02:40.000000000 +0100 @@ -1,14 +1,14 @@ -2014-10-23 Christian Lohmaier <lohmaier+LibreOffice(a)googlemail.com> [e3dda30e0aeeebed63be2190fabbb50696992c56] +2014-11-10 Christian Lohmaier <lohmaier+LibreOffice(a)googlemail.com> [b999281deff023cb4d2daef1e5ca6fda7eb6e3e3] -Version 4.3.3.2, tag libreoffice-4.3.3.2 +Version 4.3.4.1, tag libreoffice-4.3.4.1 -Change-Id: I206bae0e796a784358ef6d3da64846af5d7a04c6 +Change-Id: I0bcfc538f5633784e0001580e490a3c49482c5cb -2014-10-09 Christian Lohmaier <lohmaier+LibreOffice(a)googlemail.com> [fa4406435262b0927129c50679d72b56692d7a9c] +2014-11-10 Christian Lohmaier <lohmaier+LibreOffice(a)googlemail.com> [4d4b58a9e0de53bf3938c4f205e6303bb846cd03] -Branch libreoffice-4-3-3 +Branch libreoffice-4-3-4 -This is 'libreoffice-4-3-3' - the stable branch for the 4.3.3 release. +This is 'libreoffice-4-3-4' - the stable branch for the 4.3.4 release. Only very safe changes, reviewed by three people are allowed. If you want to commit more complicated fix for the next 4.3.x release, @@ -16,7 +16,7 @@ If you want to build something cool, unstable, and risky, use master. -Change-Id: I5726a9808fa2d9ed8c70350e3cba303323905acd +Change-Id: Idf9cb19c4ddea315f4654572cd2ab7cff583406a 2014-08-21 Andras Timar <andras.timar(a)collabora.com> [888531eda1e60931d7bf6923710cea396de9166d] ++++++ libreoffice-translations-4.3.3.2.tar.xz -> libreoffice-translations-4.3.4.1.tar.xz ++++++ /work/SRC/openSUSE:Factory/libreoffice/libreoffice-translations-4.3.3.2.tar.xz /work/SRC/openSUSE:Factory/.libreoffice.new/libreoffice-translations-4.3.4.1.tar.xz differ: char 26, line 1 -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit rgb for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package rgb for openSUSE:Factory checked in at 2014-11-24 11:17:32 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/rgb (Old) and /work/SRC/openSUSE:Factory/.rgb.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "rgb" Changes: -------- --- /work/SRC/openSUSE:Factory/rgb/rgb.changes 2013-01-22 17:47:34.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.rgb.new/rgb.changes 2014-11-24 11:17:33.000000000 +0100 @@ -1,0 +2,10 @@ +Mon Nov 17 10:45:36 UTC 2014 - sndirsch(a)suse.com + +- Update to version 1.0.6 + * This release includes contributions by Daphne Pfister to + resynchronize the X11 color name list with the CSS color + name list that has forked from ours, and also includes a + couple minor improements to the showrgb program and to the + build configuration. + +------------------------------------------------------------------- Old: ---- rgb-1.0.5.tar.bz2 New: ---- rgb-1.0.6.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ rgb.spec ++++++ --- /var/tmp/diff_new_pack.1Qkzwk/_old 2014-11-24 11:17:34.000000000 +0100 +++ /var/tmp/diff_new_pack.1Qkzwk/_new 2014-11-24 11:17:34.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package rgb # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: rgb -Version: 1.0.5 +Version: 1.0.6 Release: 0 Summary: X color name database License: MIT ++++++ rgb-1.0.5.tar.bz2 -> rgb-1.0.6.tar.bz2 ++++++ ++++ 10680 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/rgb-1.0.5/ChangeLog new/rgb-1.0.6/ChangeLog --- old/rgb-1.0.5/ChangeLog 2013-01-20 01:17:55.000000000 +0100 +++ new/rgb-1.0.6/ChangeLog 2014-11-08 20:34:24.000000000 +0100 @@ -1,3 +1,81 @@ +commit 41599a3703e7b95c73a44c548d2ba074aa3eb3d8 +Author: Alan Coopersmith <alan.coopersmith(a)oracle.com> +Date: Sat Nov 8 11:31:26 2014 -0800 + + rgb 1.0.6 + + Signed-off-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + +commit 436c80aa9fe73824b6438934897c4f810e52f6e7 +Author: Alan Coopersmith <alan.coopersmith(a)oracle.com> +Date: Sat Oct 25 11:04:57 2014 -0700 + + If opening argv[1] + ".txt" fails, try opening argv[1] without suffix + + Previously, running "showrgb /usr/share/X11/rgb.txt" would give the + confusing error message: + showrgb: unable to open rgb database "/usr/share/X11/rgb.txt" + since it was really looking for rgb.txt.txt. + + Now it just works, allowing users to use filename completion. + + Signed-off-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + +commit 3f1a7aac4b4c91e0d7b3c355b4148245ab8eb24d +Author: Alan Coopersmith <alan.coopersmith(a)oracle.com> +Date: Fri Oct 24 19:08:41 2014 -0700 + + Use asprintf() instead of malloc/strcpy/strcat, if its available + + Signed-off-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + Reviewed-by: Matthieu Herrb <matthieu(a)herrb.eu> + +commit ca05c39d1c52734661d703d92c39cc3669c7b520 +Author: Daphne Pfister <daphnediane(a)mac.com> +Date: Mon Jun 23 01:02:29 2014 -0400 + + Add aliases for colors that differ between X11 and CSS + + While CSS colors are based on X11 color and mostly the same there + are a handful that have different values: gray, grey, green, and + maroon. Add versions of the color names with X11 and Web prefix so + that tools that process rgb.txt can get either version. + + Reviewed-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + Signed-off-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + +commit ee2c453a748af6fbd0b31569b3b240517b9320f3 +Author: Daphne Pfister <daphnediane(a)mac.com> +Date: Mon Jun 23 00:58:43 2014 -0400 + + Add missing colors from CSS Color Module Level 4 + + CSS web colors are based on the X11 rgb.txt file. There are a few + colors in CSS that were not in rgb.txt. Update rgb.txt to include + all CSS color names. Adding aqua, lime, fuchsia, crimson, indigo, + olive, rebecca purple, silver and teal. + + Reviewed-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + Signed-off-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + +commit 107c0c25bae9bf784df1fe5ad9c950cc48ff98ab +Author: Alan Coopersmith <alan.coopersmith(a)oracle.com> +Date: Mon Jun 2 21:05:57 2014 -0700 + + autogen.sh: Honor NOCONFIGURE=1 + + See http://people.gnome.org/~walters/docs/build-api.txt + + Signed-off-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + +commit c9fb7603f4a9ea4a2a6bc7096769a2ae12140998 +Author: Alan Coopersmith <alan.coopersmith(a)oracle.com> +Date: Mon Jun 2 21:05:57 2014 -0700 + + configure: Drop AM_MAINTAINER_MODE + + Signed-off-by: Alan Coopersmith <alan.coopersmith(a)oracle.com> + commit c78228c3948966c3dc8cdaa9ed68449c64150fbd Author: Alan Coopersmith <alan.coopersmith(a)oracle.com> Date: Sat Jan 19 16:16:39 2013 -0800 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/rgb-1.0.5/INSTALL new/rgb-1.0.6/INSTALL --- old/rgb-1.0.5/INSTALL 2013-01-20 01:17:55.000000000 +0100 +++ new/rgb-1.0.6/INSTALL 2014-11-08 20:34:24.000000000 +0100 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `<wchar.h>' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/rgb-1.0.5/compile new/rgb-1.0.6/compile --- old/rgb-1.0.5/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/rgb-1.0.6/compile 2014-11-08 20:33:13.000000000 +0100 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Written by Tom Tromey <tromey(a)cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake(a)gnu.org> or send patches to +# <automake-patches(a)gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"$.*$ " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-automake(a)gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/rgb-1.0.5/config.h.in new/rgb-1.0.6/config.h.in --- old/rgb-1.0.5/config.h.in 2013-01-20 01:17:43.000000000 +0100 +++ new/rgb-1.0.6/config.h.in 2014-11-08 20:33:13.000000000 +0100 @@ -3,6 +3,9 @@ /* Header file to include for dbm functions */ #undef DBM_HEADER +/* Define to 1 if you have the `asprintf' function. */ +#undef HAVE_ASPRINTF + /* Define to 1 if you have the <inttypes.h> header file. */ #undef HAVE_INTTYPES_H @@ -69,5 +72,37 @@ /* Define to 1 to use plain text files for rgb database */ #undef USE_RGB_TXT +/* Enable extensions on AIX 3, Interix. */ +#ifndef _ALL_SOURCE +# undef _ALL_SOURCE +#endif +/* Enable GNU extensions on systems that have them. */ +#ifndef _GNU_SOURCE +# undef _GNU_SOURCE +#endif +/* Enable threading extensions on Solaris. */ +#ifndef _POSIX_PTHREAD_SEMANTICS +# undef _POSIX_PTHREAD_SEMANTICS +#endif +/* Enable extensions on HP NonStop. */ +#ifndef _TANDEM_SOURCE +# undef _TANDEM_SOURCE +#endif +/* Enable general extensions on Solaris. */ +#ifndef __EXTENSIONS__ +# undef __EXTENSIONS__ +#endif + + /* Version number of package */ #undef VERSION + +/* Define to 1 if on MINIX. */ +#undef _MINIX + +/* Define to 2 if the system does not provide POSIX.1 features except with + this defined. */ +#undef _POSIX_1_SOURCE + +/* Define to 1 if you need to in order for `stat' and other things to work. */ +#undef _POSIX_SOURCE diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/rgb-1.0.5/configure.ac new/rgb-1.0.6/configure.ac --- old/rgb-1.0.5/configure.ac 2013-01-20 01:17:38.000000000 +0100 +++ new/rgb-1.0.6/configure.ac 2014-11-08 20:33:00.000000000 +0100 @@ -23,14 +23,14 @@ # Initialize Autoconf AC_PREREQ([2.60]) -AC_INIT([rgb], [1.0.5], +AC_INIT([rgb], [1.0.6], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [rgb]) AC_CONFIG_SRCDIR([Makefile.am]) AC_CONFIG_HEADERS([config.h]) +AC_USE_SYSTEM_EXTENSIONS # Initialize Automake AM_INIT_AUTOMAKE([foreign dist-bzip2]) -AM_MAINTAINER_MODE # Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS m4_ifndef([XORG_MACROS_VERSION], @@ -38,6 +38,8 @@ XORG_MACROS_VERSION(1.8) XORG_DEFAULT_OPTIONS +AC_CHECK_FUNCS([asprintf]) + PKG_CHECK_MODULES(RGB, xproto) AC_MSG_CHECKING([for rgb database location]) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/rgb-1.0.5/missing new/rgb-1.0.6/missing --- old/rgb-1.0.5/missing 2013-01-20 01:17:43.000000000 +0100 +++ new/rgb-1.0.6/missing 2014-11-08 20:33:13.000000000 +0100 @@ -1,11 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2009-04-28.21; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pinard(a)iro.umontreal.ca>, 1996. +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <pinard(a)iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,69 +25,40 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi -run=: -sed_output='s/.* --output[ =]$[^ ]*$.*/\1/p' -sed_minuso='s/.* -o $[^ ]*$.*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-automake(a)gnu.org>." exit $? @@ -100,272 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER($[^)]*$).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* $[^ ]*$ *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* $[^ ]*$ *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/rgb-1.0.5/rgb.txt new/rgb-1.0.6/rgb.txt --- old/rgb-1.0.5/rgb.txt 2013-01-20 01:17:38.000000000 +0100 +++ new/rgb-1.0.6/rgb.txt 2014-11-08 20:33:00.000000000 +0100 @@ -57,6 +57,14 @@ 119 136 153 LightSlateGrey 190 190 190 gray 190 190 190 grey +190 190 190 x11 gray +190 190 190 X11Gray +190 190 190 x11 grey +190 190 190 X11Grey +128 128 128 web gray +128 128 128 WebGray +128 128 128 web grey +128 128 128 WebGrey 211 211 211 light grey 211 211 211 LightGrey 211 211 211 light gray @@ -105,6 +113,7 @@ 72 209 204 MediumTurquoise 64 224 208 turquoise 0 255 255 cyan + 0 255 255 aqua 224 255 255 light cyan 224 255 255 LightCyan 95 158 160 cadet blue @@ -131,6 +140,11 @@ 124 252 0 lawn green 124 252 0 LawnGreen 0 255 0 green + 0 255 0 lime + 0 255 0 x11 green + 0 255 0 X11Green + 0 128 0 web green + 0 128 0 WebGreen 127 255 0 chartreuse 0 250 154 medium spring green 0 250 154 MediumSpringGreen @@ -202,11 +216,16 @@ 219 112 147 pale violet red 219 112 147 PaleVioletRed 176 48 96 maroon +176 48 96 x11 maroon +176 48 96 X11Maroon +128 0 0 web maroon +128 0 0 WebMaroon 199 21 133 medium violet red 199 21 133 MediumVioletRed 208 32 144 violet red 208 32 144 VioletRed 255 0 255 magenta +255 0 255 fuchsia 238 130 238 violet 221 160 221 plum 218 112 214 orchid @@ -219,6 +238,10 @@ 138 43 226 blue violet 138 43 226 BlueViolet 160 32 240 purple +160 32 240 x11 purple +160 32 240 X11Purple +128 0 128 web purple +128 0 128 WebPurple 147 112 219 medium purple 147 112 219 MediumPurple 216 191 216 thistle @@ -750,3 +773,10 @@ 139 0 0 DarkRed 144 238 144 light green 144 238 144 LightGreen +220 20 60 crimson + 75 0 130 indigo +128 128 0 olive +102 51 153 rebecca purple +102 51 153 RebeccaPurple +192 192 192 silver + 0 128 128 teal diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/rgb-1.0.5/showrgb.c new/rgb-1.0.6/showrgb.c --- old/rgb-1.0.5/showrgb.c 2013-01-20 01:17:38.000000000 +0100 +++ new/rgb-1.0.6/showrgb.c 2014-11-08 20:33:00.000000000 +0100 @@ -124,11 +124,18 @@ int lineno = 0; int red, green, blue; +#ifdef HAVE_ASPRINTF + if (asprintf(&path, "%s.txt", filename) == -1) { + perror (ProgramName); + exit (1); + } +#else path = (char *)malloc(strlen(filename) + 5); strcpy(path, filename); strcat(path, ".txt"); +#endif - if (!(rgb = fopen(path, "r"))) { + if (!(rgb = fopen(path, "r")) && !(rgb = fopen(filename, "r"))) { fprintf (stderr, "%s: unable to open rgb database \"%s\"\n", ProgramName, filename); free(path); -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit intel-gpu-tools for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package intel-gpu-tools for openSUSE:Factory checked in at 2014-11-24 11:17:31 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/intel-gpu-tools (Old) and /work/SRC/openSUSE:Factory/.intel-gpu-tools.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "intel-gpu-tools" Changes: -------- --- /work/SRC/openSUSE:Factory/intel-gpu-tools/intel-gpu-tools.changes 2014-06-18 07:52:49.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.intel-gpu-tools.new/intel-gpu-tools.changes 2014-11-24 11:17:31.000000000 +0100 @@ -1,0 +2,15 @@ +Mon Nov 17 10:26:21 UTC 2014 - sndirsch(a)suse.com + +- rename intel-gpu-tools-1.7-fix-bashisms.patch to + u_intel-gpu-tools-1.7-fix-bashisms.patch according to our patch + guidelines + +------------------------------------------------------------------- +Mon Nov 17 04:00:00 UTC 2014 - Led <ledest(a)gmail.com> + +- fix bashism in intel_gpu_abrt script that uses bash-specific + constructions +- add patches: + * intel-gpu-tools-1.7-fix-bashisms.patch + +------------------------------------------------------------------- New: ---- u_intel-gpu-tools-1.7-fix-bashisms.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ intel-gpu-tools.spec ++++++ --- /var/tmp/diff_new_pack.60hWiZ/_old 2014-11-24 11:17:32.000000000 +0100 +++ /var/tmp/diff_new_pack.60hWiZ/_new 2014-11-24 11:17:32.000000000 +0100 @@ -26,6 +26,7 @@ Source0: %{name}-%{version}.tar.bz2 Patch0: n_disable-build-of-pm_rpm.patch Patch1: n_missing_check-ndebug.h.patch +Patch2: u_%{name}-1.7-fix-bashisms.patch BuildRequires: i2c-tools BuildRequires: libtool BuildRequires: pkg-config @@ -52,6 +53,7 @@ %setup -q -n %{name}-%{version} %patch0 -p1 %patch1 -p1 +%patch2 -p1 %build autoreconf -fi ++++++ u_intel-gpu-tools-1.7-fix-bashisms.patch ++++++ diff -Ndur intel-gpu-tools-1.7/tools/intel_gpu_abrt intel-gpu-tools-1.7-fix-bashisms/tools/intel_gpu_abrt --- intel-gpu-tools-1.7/tools/intel_gpu_abrt 2014-05-13 15:31:22.000000000 +0300 +++ intel-gpu-tools-1.7-fix-bashisms/tools/intel_gpu_abrt 2014-11-17 06:51:03.587423549 +0200 @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash if [[ $UID -ne 0 ]]; then echo "$0 must be run as root" -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit tigervnc for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package tigervnc for openSUSE:Factory checked in at 2014-11-24 11:17:29 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/tigervnc (Old) and /work/SRC/openSUSE:Factory/.tigervnc.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "tigervnc" Changes: -------- --- /work/SRC/openSUSE:Factory/tigervnc/tigervnc.changes 2014-11-03 13:11:59.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.tigervnc.new/tigervnc.changes 2014-11-24 11:17:30.000000000 +0100 @@ -1,0 +2,5 @@ +Sun Nov 16 09:33:04 UTC 2014 - oscar(a)naiandei.net + +- add -fPIC to CFLAGS and CXXFLAGS to compile correctly on armv7l + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ tigervnc.spec ++++++ --- /var/tmp/diff_new_pack.GDqKkG/_old 2014-11-24 11:17:31.000000000 +0100 +++ /var/tmp/diff_new_pack.GDqKkG/_new 2014-11-24 11:17:31.000000000 +0100 @@ -170,8 +170,8 @@ popd %build -export CXXFLAGS="%optflags" -export CFLAGS="%optflags" +export CXXFLAGS="%optflags -fPIC" +export CFLAGS="%optflags -fPIC" # Build all tigervnc cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=%{_prefix} -DCMAKE_BUILD_TYPE=RelWithDebInfo make %{?_smp_mflags} -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit kaffeine for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package kaffeine for openSUSE:Factory checked in at 2014-11-24 11:17:28 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/kaffeine (Old) and /work/SRC/openSUSE:Factory/.kaffeine.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "kaffeine" Changes: -------- --- /work/SRC/openSUSE:Factory/kaffeine/kaffeine.changes 2013-08-21 15:11:07.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.kaffeine.new/kaffeine.changes 2014-11-24 11:17:29.000000000 +0100 @@ -1,0 +2,6 @@ +Sat Nov 15 14:32:20 UTC 2014 - wbauer(a)tmo.at + +- fix ksuseinstall to install libxine2-codecs, libxine1 is not used any more since 12.2 + (boo#858018) + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ ksuseinstall.diff ++++++ --- /var/tmp/diff_new_pack.qleOFI/_old 2014-11-24 11:17:30.000000000 +0100 +++ /var/tmp/diff_new_pack.qleOFI/_new 2014-11-24 11:17:30.000000000 +0100 @@ -99,7 +99,7 @@ + { + return; + } -+ if( KSUSEInstall::installCapabilities( QStringList() << "libxine1-codecs", ++ if( KSUSEInstall::installCapabilities( QStringList() << "libxine2-codecs", + KSUSEInstall::FullInstallRequired, window())) + { // TODO use the items + KGuiItem restartNowGuiItem( KStandardGuiItem::yes()); -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit atomiks for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package atomiks for openSUSE:Factory checked in at 2014-11-24 11:16:00 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/atomiks (Old) and /work/SRC/openSUSE:Factory/.atomiks.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "atomiks" Changes: -------- --- /work/SRC/openSUSE:Factory/atomiks/atomiks.changes 2014-11-13 09:17:18.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.atomiks.new/atomiks.changes 2014-11-24 11:16:04.000000000 +0100 @@ -1,0 +2,13 @@ +Tue Nov 18 09:34:43 UTC 2014 - nemysis(a)gmx.ch + +- Add BuildRequires for hicolor-icon-theme + +------------------------------------------------------------------- +Mon Nov 17 21:59:29 UTC 2014 - nemysis(a)gmx.ch + +- Use CFLAGS="%{optflags}" to fix + 'File is compiled without RPM_OPT_FLAGS' +- Install icon in %{_datadir}/icons/hicolor/48x48/apps/ + instead of %{_datadir}/pixmaps/ + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ atomiks.spec ++++++ --- /var/tmp/diff_new_pack.CwWST4/_old 2014-11-24 11:16:05.000000000 +0100 +++ /var/tmp/diff_new_pack.CwWST4/_new 2014-11-24 11:16:05.000000000 +0100 @@ -29,6 +29,7 @@ Source2: %{name}.desktop %if 0%{?suse_version} BuildRequires: fdupes +BuildRequires: hicolor-icon-theme BuildRequires: update-desktop-files %endif BuildRequires: dos2unix @@ -52,7 +53,7 @@ dos2unix readme.txt license.txt history.txt %build -make %{?_smp_mflags} +make %{?_smp_mflags} CFLAGS="%{optflags}" %install # install executable @@ -60,7 +61,7 @@ install -Dm 0755 editor %{buildroot}%{_bindir}/%{name}-editor # install icon -install -Dm 0644 %{S:1} %{buildroot}%{_datadir}/pixmaps/%{name}.png +install -Dm 0644 %{S:1} %{buildroot}/%{_datadir}/icons/hicolor/48x48/apps/%{name}.png # install Desktop file install -Dm 0644 %{S:2} %{buildroot}%{_datadir}/applications/%{name}.desktop @@ -76,6 +77,6 @@ %{_bindir}/%{name} %{_bindir}/%{name}-editor %{_datadir}/applications/%{name}.desktop -%{_datadir}/pixmaps/%{name}.png +%{_datadir}/icons/hicolor/ %changelog -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit rrdtool for openSUSE:Factory
by root＠hilbert.suse.de 24 Nov '14

24 Nov '14

Hello community, here is the log from the commit of package rrdtool for openSUSE:Factory checked in at 2014-11-24 11:15:53 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/rrdtool (Old) and /work/SRC/openSUSE:Factory/.rrdtool.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "rrdtool" Changes: -------- --- /work/SRC/openSUSE:Factory/rrdtool/rrdtool.changes 2014-02-15 17:18:04.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.rrdtool.new/rrdtool.changes 2014-11-24 11:16:00.000000000 +0100 @@ -1,0 +2,11 @@ +Sun Nov 23 06:16:00 UTC 2014 - Led <ledest(a)gmail.com> + +- fix bashisms in rrdcached-systemd-pre script + +------------------------------------------------------------------- +Wed Nov 19 22:59:24 UTC 2014 - dimstar(a)opensuse.org + +- Replace systemd BuildRequires with pkgconfig(systemd): we do not + require the full installation / dep chain of systemd. + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ rrdtool.spec ++++++ --- /var/tmp/diff_new_pack.tzm6oW/_old 2014-11-24 11:16:04.000000000 +0100 +++ /var/tmp/diff_new_pack.tzm6oW/_new 2014-11-24 11:16:04.000000000 +0100 @@ -35,9 +35,9 @@ BuildRequires: pango-devel BuildRequires: python-devel BuildRequires: ruby-devel -BuildRequires: systemd BuildRequires: tcl-devel BuildRequires: tcpd-devel +BuildRequires: pkgconfig(systemd) Requires: perl = %{perl_version} Version: 1.4.7 Release: 0 ++++++ rrdcached-systemd-pre ++++++ --- /var/tmp/diff_new_pack.tzm6oW/_old 2014-11-24 11:16:04.000000000 +0100 +++ /var/tmp/diff_new_pack.tzm6oW/_new 2014-11-24 11:16:04.000000000 +0100 @@ -17,14 +17,14 @@ # Read config . $RRDCACHED_CONFIG -function check_and_create_dir(){ +check_and_create_dir() { local DIR=$1 test -d "$DIR" || mkdir -p "$DIR" } case "$RRDCACHED_ADDRESS" in - ^unix:) - SOCKETDIR=$(dirname ${RRDCACHED_ADDRESS/unix:/}) + unix:*) + SOCKETDIR=$(dirname ${RRDCACHED_ADDRESS#unix:}) check_and_create_dir "$SOCKETDIR" chgrp $RRDCACHED_GROUP "$SOCKETDIR" ;; -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0