February 2013 - openSUSE Commits - openSUSE Mailing Lists

commit release-notes-openSUSE for openSUSE:12.3
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package release-notes-openSUSE for openSUSE:12.3 checked in at 2013-02-21 15:34:56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:12.3/release-notes-openSUSE (Old) and /work/SRC/openSUSE:12.3/.release-notes-openSUSE.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "release-notes-openSUSE", Maintainer is "ke(a)suse.com" Changes: -------- --- /work/SRC/openSUSE:12.3/release-notes-openSUSE/release-notes-openSUSE.changes 2013-02-14 21:13:54.000000000 +0100 +++ /work/SRC/openSUSE:12.3/.release-notes-openSUSE.new/release-notes-openSUSE.changes 2013-02-21 15:34:57.000000000 +0100 @@ -1,0 +2,7 @@ +Thu Feb 21 13:01:43 UTC 2013 - ke(a)suse.de + +- 12.3.3: +* New entries: UEFI update. +* Minor changes (bnc#804301; bnc#804315). + +------------------------------------------------------------------- Old: ---- release-notes-opensuse-12.3.2.tar.bz2 New: ---- release-notes-opensuse-12.3.3.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ release-notes-openSUSE.spec ++++++ --- /var/tmp/diff_new_pack.UGARfZ/_old 2013-02-21 15:34:57.000000000 +0100 +++ /var/tmp/diff_new_pack.UGARfZ/_new 2013-02-21 15:34:57.000000000 +0100 @@ -30,7 +30,7 @@ Group: Documentation/SUSE BuildArch: noarch BuildRoot: %{_tmppath}/%{name}-%{version}-build -Version: 12.3.2 +Version: 12.3.3 Release: 0 Provides: release-notes = %{version} Source0: release-notes-opensuse-%{version}.tar.bz2 ++++++ release-notes-opensuse-12.3.2.tar.bz2 -> release-notes-opensuse-12.3.3.tar.bz2 ++++++ ++++ 5206 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit release-notes-openSUSE for openSUSE:Factory
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package release-notes-openSUSE for openSUSE:Factory checked in at 2013-02-21 15:34:51 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/release-notes-openSUSE (Old) and /work/SRC/openSUSE:Factory/.release-notes-openSUSE.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "release-notes-openSUSE", Maintainer is "ke(a)suse.com" Changes: -------- --- /work/SRC/openSUSE:Factory/release-notes-openSUSE/release-notes-openSUSE.changes 2013-02-14 21:13:50.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.release-notes-openSUSE.new/release-notes-openSUSE.changes 2013-02-21 15:34:53.000000000 +0100 @@ -1,0 +2,7 @@ +Thu Feb 21 13:01:43 UTC 2013 - ke(a)suse.de + +- 12.3.3: +* New entries: UEFI update. +* Minor changes (bnc#804301; bnc#804315). + +------------------------------------------------------------------- Old: ---- release-notes-opensuse-12.3.2.tar.bz2 New: ---- release-notes-opensuse-12.3.3.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ release-notes-openSUSE.spec ++++++ --- /var/tmp/diff_new_pack.ify9EX/_old 2013-02-21 15:34:55.000000000 +0100 +++ /var/tmp/diff_new_pack.ify9EX/_new 2013-02-21 15:34:55.000000000 +0100 @@ -30,7 +30,7 @@ Group: Documentation/SUSE BuildArch: noarch BuildRoot: %{_tmppath}/%{name}-%{version}-build -Version: 12.3.2 +Version: 12.3.3 Release: 0 Provides: release-notes = %{version} Source0: release-notes-opensuse-%{version}.tar.bz2 ++++++ release-notes-opensuse-12.3.2.tar.bz2 -> release-notes-opensuse-12.3.3.tar.bz2 ++++++ ++++ 5206 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit grub2 for openSUSE:12.3
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package grub2 for openSUSE:12.3 checked in at 2013-02-21 15:32:20 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:12.3/grub2 (Old) and /work/SRC/openSUSE:12.3/.grub2.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "grub2", Maintainer is "MChang(a)suse.com" Changes: -------- --- /work/SRC/openSUSE:12.3/grub2/grub2.changes 2013-02-07 14:16:26.000000000 +0100 +++ /work/SRC/openSUSE:12.3/.grub2.new/grub2.changes 2013-02-21 15:32:25.000000000 +0100 @@ -1,0 +2,23 @@ +Tue Feb 19 15:38:04 UTC 2013 - duwe(a)suse.com + + Fix up bogus items from the previous merge: + - efi_libdir = _libdir = /usr/lib + - package /usr/lib/grub2 dir only once + - move grub.efi to /usr/lib/grub2/%{grubefiarch}/ + - create a symlink so that scripts can find it there. + +------------------------------------------------------------------- +Thu Feb 14 11:42:40 UTC 2013 - duwe(a)suse.com + +- merge internal+external BS changes into superset spec file, + remove obsolete dependencies +- merge SLES+openSUSE patches, restrict "grub-efi" to 12.2 +- add efidisk-ahci-workaround (bnc#794674) +- fix unquoted-string-in-class.patch (bnc#788322) + +------------------------------------------------------------------- +Fri Feb 8 01:58:22 UTC 2013 - mchang(a)suse.com + +- adapt to pesign-obs-integration changes + +------------------------------------------------------------------- @@ -6,0 +30,5 @@ +Thu Jan 31 16:18:56 UTC 2013 - duwe(a)suse.com + +- switch to out of source / subdir build + +------------------------------------------------------------------- @@ -24,0 +53,13 @@ +Tue Jan 29 02:42:28 UTC 2013 - mchang(a)suse.com + +- set empty prefix to grub.efi for looking up in current directory +- remove grubcd.efi, as grub.efi can now be used for cdrom booting + +------------------------------------------------------------------- +Mon Jan 28 08:05:52 CET 2013 - snwint(a)suse.de + +- add fat module to grubcd +- explicitly set empty prefix to get grub to set $prefix to the currrent + directory + +------------------------------------------------------------------- @@ -31,0 +73,10 @@ +Fri Jan 18 06:24:57 UTC 2013 - mchang(a)suse.com + +- ship a Secure Boot UEFI compatible bootloader (fate#314485). +- update for cdrom boot support. +- grub2-cdpath.patch: fix the grub.cfg not found when booting from + optical disk. +- grubcd.efi: the efi image used for optial disk booting, with + reduced size and $prefix set to /EFI/BOOT. + +------------------------------------------------------------------- @@ -51,0 +103,20 @@ + +------------------------------------------------------------------- +Fri Dec 21 04:18:06 UTC 2012 - mchang(a)suse.com + +- put 32-bit grub2 modules to /usr/lib/grub2 +- put 64-bit grub2 modules to /usr/lib64/grub2 (x86_64-efi) +- put grub.efi to /usr/lib64/efi(x86_64) or /usr/lib/efi(i586) + +------------------------------------------------------------------- +Tue Dec 18 03:43:38 UTC 2012 - mchang(a)suse.com + +- ship a Secure Boot UEFI compatible bootloader (fate#314485) +- add grub2-secureboot-chainloader.patch, which expands the efi + chainloader to be able to verify images via shim lock protocol. + +------------------------------------------------------------------- +Fri Nov 30 06:39:15 UTC 2012 - mchang(a)suse.com + +- replace %{sles_version} by %{suse_version} +- use correct product name New: ---- efidisk-ahci-workaround ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ grub2.spec ++++++ --- /var/tmp/diff_new_pack.Kekzps/_old 2013-02-21 15:32:27.000000000 +0100 +++ /var/tmp/diff_new_pack.Kekzps/_new 2013-02-21 15:32:27.000000000 +0100 @@ -15,6 +15,7 @@ # Please submit bugfixes or comments via http://bugs.opensuse.org/ # + # needssslcertforbuild Name: grub2 @@ -43,18 +44,14 @@ BuildRequires: texinfo %endif BuildRequires: python -BuildRequires: ruby BuildRequires: xz-devel -%if 0%{?suse_version} == 1210 -BuildRequires: guile -%endif %ifarch x86_64 -%if 0%{?suse_version} >= 1230 +%if 0%{?suse_version} >= 1230 || 0%{?sles_version} >= 11 BuildRequires: pesign-obs-integration %endif %endif -# Modules always contain just 32-bit code +# Modules code is dynamically loaded and collected from a _fixed_ path. %define _libdir %{_exec_prefix}/lib %ifarch ppc ppc64 @@ -82,7 +79,7 @@ %endif %endif -%if 0%{?sles_version} == 11 +%if 0%{?suse_version} == 1110 || 0%{?sles_version} == 11 %define only_efi %{nil} %define only_x86_64 %{nil} %endif @@ -135,6 +132,7 @@ Patch28: grub2-fix-unquoted-string-in-class.patch Patch29: grub2-secureboot-chainloader.patch Patch30: grub2-cdpath.patch +Patch31: efidisk-ahci-workaround PreReq: perl-Bootloader Requires: gettext-runtime %if 0%{?suse_version} >= 1140 @@ -155,20 +153,26 @@ %endif %description -This is the second version of the GRUB (Grand Unified Bootloader), -a highly configurable and customizable bootloader with modular -architecture. It supports rich scale of kernel formats, file systems, +This is the second version of the GRUB (Grand Unified Bootloader), a +highly configurable and customizable bootloader with modular +architecture. It support rich scale of kernel formats, file systems, computer architectures and hardware devices. -PLEASE NOTE: This is a development snapshot, and as such will not -replace grub if you install it, but will be merely added as another -kernel to your existing GRUB menu. Do not replace GRUB (grub package) -with it unless you know what are you doing. Refer to README.openSUSE -file that is part of this package's documentation for more information. + + +Authors: +-------- + Gordon Matzigkeit + Yoshinori K. Okuji + Colin Watson + Colin D. Bennett + Vesa J��skel�inen + Robert Millan + Carles Pina %package %{grubarch} -Summary: GRUB2 for %{platform} systems +Summary: Bootloader with support for Linux, Multiboot and more Group: System/Boot %description %{grubarch} @@ -178,23 +182,36 @@ provides support for %{platform} systems. %ifarch %{efi} - +%if 0%{?suse_version} == 1220 || 0%{?suse_version} == 1230 %package efi -Summary: GRUB2 for EFI systems +Summary: Bootloader with support for Linux, Multiboot and more Group: System/Boot PreReq: %{name} = %{version}-%{release} PreReq: %{name}-%{grubefiarch} = %{version}-%{release} %description efi -The GRand Unified Bootloader (GRUB) is a highly configurable and customizable -bootloader with modular architecture. It supports rich variety of kernel formats, -file systems, computer architectures and hardware devices. This subpackage -provides compatibility to old package and install new required one. +This is the second version of the GRUB (Grand Unified Bootloader), a +highly configurable and customizable bootloader with modular +architecture. It support rich scale of kernel formats, file systems, +computer architectures and hardware devices. + + + +Authors: +-------- + Gordon Matzigkeit + Yoshinori K. Okuji + Colin Watson + Colin D. Bennett + Vesa J��skel�inen + Robert Millan + Carles Pina +%endif %package %{grubefiarch} -Summary: GRUB2 for EFI systems +Summary: Bootloader with support for Linux, Multiboot and more Group: System/Boot %ifarch ia64 x86_64 #Package is available on ia64 and x86_64 only and not necessarily needed @@ -211,14 +228,12 @@ %prep # We create (if we build for efi) two copies of the sources in the Builddir -%setup -q -T -c -n grub-%{version} -a 0 -a 5 -cp -r po grub-%{version}/ -cd grub-%{version} +%setup -q -n grub-%{version} -a 5 (cd po && ls *.po | cut -d. -f1 | xargs) >po/LINGUAS %patch0 -p1 %patch1 -p1 # Workaround SLE11's patch utility did not rename the file for us -%if 0%{?sles_version} == 11 +%if 0%{?suse_version} == 1110 || 0%{?sles_version} == 11 mv docs/grub.texi docs/grub2.texi %endif %patch2 -p1 @@ -252,28 +267,38 @@ %patch28 -p1 %patch29 -p1 %patch30 -p1 -cd .. +%patch31 -p1 # README.openSUSE -cp %{SOURCE3} grub-%{version}/ -cp %{SOURCE8} grub-%{version}/ -cp %{SOURCE9} grub-%{version}/grub-core/ +cp %{SOURCE3} . +cp %{SOURCE8} . +cp %{SOURCE9} grub-core/. +mkdir build %ifarch %{efi} -(cp -a grub-%{version} grub-efi-%{version}) +mkdir build-efi %endif %build -%ifarch %{efi} -cd grub-efi-%{version} autoreconf -vi -# we don't want to let rpm to override *FLAGS by bogus ones +# Not yet: +%define common_conf_options TARGET_LDFLAGS=-static --program-transform-name=s,grub,%{name}, +# This does NOT work on SLE11: +%define _configure ../configure + +# We don't want to let rpm override *FLAGS with default a.k.a bogus values. CFLAGS="-fno-strict-aliasing -fno-inline-functions-called-once " CXXFLAGS=" " FFLAGS=" " export CFLAGS CXXFLAGS FFLAGS -%configure \ + +%ifarch %{efi} +cd build-efi +../configure \ TARGET_LDFLAGS=-static \ + --prefix=%{_prefix} \ + --sysconfdir=%{_sysconfdir} \ --target=%{_target_platform} \ + --libdir=%{_libdir} \ --with-platform=efi \ --program-transform-name=s,grub,%{name}, make %{?_smp_mflags} @@ -282,10 +307,10 @@ FS_MODULES="ext2 btrfs ext2 xfs jfs reiserfs" CD_MODULES=" all_video boot cat chain configfile echo \ - efinet fat font gfxmenu gfxterm gzio halt iso9660 \ + efinet font gfxmenu gfxterm gzio halt iso9660 \ jpeg minicmd normal part_apple part_msdos part_gpt \ password_pbkdf2 png reboot search search_fs_uuid \ - search_fs_file search_label sleep test video" + search_fs_file search_label sleep test video fat" %ifarch x86_64 CD_MODULES="${CD_MODULES} linuxefi" @@ -303,14 +328,7 @@ %endif %if ! 0%{?only_efi:1} -cd grub-%{version} -autoreconf -vi - -# we don't want to let rpm to override *FLAGS by bogus ones -CFLAGS="-fno-strict-aliasing -fno-inline-functions-called-once " -CXXFLAGS=" " -FFLAGS=" " -export CFLAGS CXXFLAGS FFLAGS +cd build # 64-bit x86-64 machines use 32-bit boot loader # (We cannot just redefine _target_cpu, as we'd get i386.rpm packages then) @@ -324,26 +342,27 @@ # -static is needed so that autoconf script is able to link # test that looks for _start symbol on 64 bit platforms -%configure TARGET_LDFLAGS=-static \ +../configure TARGET_LDFLAGS=-static \ + --prefix=%{_prefix} \ + --sysconfdir=%{_sysconfdir} \ --target=%{_target_platform} \ --with-platform=%{platform} \ %{extraconfigure} \ --program-transform-name=s,grub,%{name}, - make %{?_smp_mflags} %endif %install %ifarch %{efi} -cd grub-efi-%{version} -make DESTDIR=$RPM_BUILD_ROOT install - -install -m 644 grub.efi $RPM_BUILD_ROOT%{_libdir}/%{name}/%{grubefiarch}/grub.efi %ifarch x86_64 -%if 0%{?suse_version} >= 1230 +%if 0%{?suse_version} >= 1230 || 0%{?sles_version} >= 11 export BRP_PESIGN_FILES="%{_libdir}/%{name}/%{grubefiarch}/grub.efi" %endif %endif +cd build-efi +make DESTDIR=$RPM_BUILD_ROOT install + +install -m 644 grub.efi $RPM_BUILD_ROOT%{_libdir}/%{name}/%{grubefiarch}/. # Create grub.efi link to system efi directory # This is for tools like kiwi not fiddling with the path @@ -359,10 +378,10 @@ %endif %if ! 0%{?only_efi:1} -cd grub-%{version} +cd build make DESTDIR=$RPM_BUILD_ROOT install %else -cd grub-efi-%{version} +cd build-efi %endif # Script that makes part of grub.cfg persist across updates @@ -382,6 +401,7 @@ %endif %ifarch %{efi} +%if 0%{?suse_version} == 1220 || 0%{?suse_version} == 1230 # grub2-efi compatibility links until other packages are fixed ln -sf %{name}-editenv $RPM_BUILD_ROOT%{_bindir}/%{name}-efi-editenv ln -sf %{name}-set-default $RPM_BUILD_ROOT%{_sbindir}/%{name}-efi-set-default @@ -389,6 +409,7 @@ ln -sf %{name}-install $RPM_BUILD_ROOT%{_sbindir}/%{name}-efi-install ln -sf %{name} $RPM_BUILD_ROOT/boot/%{name}-efi %endif +%endif # Defaults install -m 644 -D %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/default/grub @@ -441,6 +462,7 @@ %endif %ifarch %{efi} +%if 0%{?suse_version} == 1220 || 0%{?suse_version} == 1230 %triggerpostun -- %{name}-efi @@ -506,6 +528,7 @@ fi exit 0 %endif +%endif %preun if [ $1 = 0 ]; then @@ -543,16 +566,16 @@ %endif fi %if 0%{?only_efi:1} -%define source_dir grub-efi-%{version} +%define source_dir build-efi %else -%define source_dir grub-%{version} +%define source_dir build %endif %files -f %{source_dir}/%{name}.lang %defattr(-,root,root,-) -%doc %{source_dir}/COPYING %{source_dir}/NEWS %{source_dir}/README -%doc %{source_dir}/THANKS %{source_dir}/TODO %{source_dir}/ChangeLog -%doc %{source_dir}/README.openSUSE +%doc COPYING NEWS README +%doc THANKS TODO ChangeLog +%doc README.openSUSE %dir /boot/%{name} %ghost /boot/%{name}/grub.cfg %{_sysconfdir}/bash_completion.d/grub @@ -593,6 +616,7 @@ %{_infodir}/%{name}.info* %if ! 0%{?only_efi:1} + %files %{grubarch} %defattr(-,root,root,-) %dir %{_libdir}/%{name}/%{grubarch} @@ -613,14 +637,17 @@ %endif %ifarch %{efi} + +%if 0%{?suse_version} == 1220 || 0%{?suse_version} == 1230 %files efi %defattr(-,root,root,-) -%doc %{source_dir}/README +%doc README %ghost /boot/grub2-efi %{_sbindir}/grub2-efi-install %{_sbindir}/grub2-efi-mkconfig %{_sbindir}/grub2-efi-set-default %{_bindir}/grub2-efi-editenv +%endif %files %{grubefiarch} %defattr(-,root,root,-) ++++++ efidisk-ahci-workaround ++++++ >From 61474615b8e177881caa89fc04cae16019cf01b9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett <mjg(a)redhat.com> Date: Wed, 15 Aug 2012 14:37:07 -0400 Subject: [PATCH] efidisk: Read chunks in smaller blocks --- grub-core/disk/efi/efidisk.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/grub-core/disk/efi/efidisk.c b/grub-core/disk/efi/efidisk.c index a432b44..77ab5b0 100644 --- a/grub-core/disk/efi/efidisk.c +++ b/grub-core/disk/efi/efidisk.c @@ -546,6 +546,9 @@ grub_efidisk_read (struct grub_disk *disk, grub_disk_addr_t sector, struct grub_efidisk_data *d; grub_efi_block_io_t *bio; grub_efi_status_t status; + grub_size_t remaining = size; + grub_size_t read = 0; + grub_size_t chunk = 0x500; d = disk->data; bio = d->block_io; @@ -554,14 +557,29 @@ grub_efidisk_read (struct grub_disk *disk, grub_disk_addr_t sector, "reading 0x%lx sectors at the sector 0x%llx from %s\n", (unsigned long) size, (unsigned long long) sector, disk->name); + while (remaining > chunk) { + status = efi_call_5 (bio->read_blocks, bio, bio->media->media_id, + (grub_efi_uint64_t) sector + read, + (grub_efi_uintn_t) chunk << disk->log_sector_size, + buf + (read << disk->log_sector_size)); + if (status != GRUB_EFI_SUCCESS) + return grub_error (GRUB_ERR_READ_ERROR, + N_("failure reading sector 0x%llx from `%s'"), + (unsigned long long) sector + read, + disk->name); + read += chunk; + remaining -= chunk; + } + status = efi_call_5 (bio->read_blocks, bio, bio->media->media_id, - (grub_efi_uint64_t) sector, - (grub_efi_uintn_t) size << disk->log_sector_size, - buf); + (grub_efi_uint64_t) sector + read, + (grub_efi_uintn_t) remaining << disk->log_sector_size, + buf + (read << disk->log_sector_size)); + if (status != GRUB_EFI_SUCCESS) return grub_error (GRUB_ERR_READ_ERROR, N_("failure reading sector 0x%llx from `%s'"), - (unsigned long long) sector, + (unsigned long long) sector + read, disk->name); return GRUB_ERR_NONE; -- 1.7.11.2 ++++++ grub2-fix-unquoted-string-in-class.patch ++++++ --- /var/tmp/diff_new_pack.Kekzps/_old 2013-02-21 15:32:27.000000000 +0100 +++ /var/tmp/diff_new_pack.Kekzps/_new 2013-02-21 15:32:27.000000000 +0100 @@ -20,58 +20,55 @@ util/grub.d/20_linux_xen.in | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) -diff --git a/util/grub.d/10_hurd.in b/util/grub.d/10_hurd.in -index 45f0ad3..5afc079 100644 ---- a/util/grub.d/10_hurd.in -+++ b/util/grub.d/10_hurd.in -@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then +Index: grub-2.00/util/grub.d/10_hurd.in +=================================================================== +--- grub-2.00.orig/util/grub.d/10_hurd.in ++++ grub-2.00/util/grub.d/10_hurd.in +@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; th OS=GNU else OS="${GRUB_DISTRIBUTOR} GNU/Hurd" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) ${CLASS}" -+ CLASS="--class '$(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1)' ${CLASS}" ++ CLASS="--class '$(echo -n "${GRUB_DISTRIBUTOR}" | sed -r 's/[^[:alnum:]]+/-/g; s/(^-|-$)//g' | tr 'A-Z' 'a-z')' ${CLASS}" fi at_least_one=false -diff --git a/util/grub.d/10_kfreebsd.in b/util/grub.d/10_kfreebsd.in -index b0e84e2..4ec8d96 100644 ---- a/util/grub.d/10_kfreebsd.in -+++ b/util/grub.d/10_kfreebsd.in +Index: grub-2.00/util/grub.d/10_kfreebsd.in +=================================================================== +--- grub-2.00.orig/util/grub.d/10_kfreebsd.in ++++ grub-2.00/util/grub.d/10_kfreebsd.in @@ -30,7 +30,7 @@ CLASS="--class os" case "${GRUB_DISTRIBUTOR}" in Debian) OS="${GRUB_DISTRIBUTOR} GNU/kFreeBSD" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) --class gnu-kfreebsd --class gnu ${CLASS}" -+ CLASS="--class '$(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1)' --class gnu-kfreebsd --class gnu ${CLASS}" ++ CLASS="--class '$(echo -n "${GRUB_DISTRIBUTOR}" | sed -r 's/[^[:alnum:]]+/-/g; s/(^-|-$)//g' | tr 'A-Z' 'a-z')' --class gnu-kfreebsd --class gnu ${CLASS}" ;; *) OS="FreeBSD" -diff --git a/util/grub.d/10_linux.in b/util/grub.d/10_linux.in -index b2f65c0..40f8651 100644 ---- a/util/grub.d/10_linux.in -+++ b/util/grub.d/10_linux.in -@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then +Index: grub-2.00/util/grub.d/10_linux.in +=================================================================== +--- grub-2.00.orig/util/grub.d/10_linux.in ++++ grub-2.00/util/grub.d/10_linux.in +@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; th OS=GNU/Linux else OS="${GRUB_DISTRIBUTOR}" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) ${CLASS}" -+ CLASS="--class '$(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1)' ${CLASS}" ++ CLASS="--class '$(echo -n "${GRUB_DISTRIBUTOR}" | sed -r 's/[^[:alnum:]]+/-/g; s/(^-|-$)//g' | tr 'A-Z' 'a-z')' ${CLASS}" fi # loop-AES arranges things so that /dev/loop/X can be our root device, but -diff --git a/util/grub.d/20_linux_xen.in b/util/grub.d/20_linux_xen.in -index 29184c2..f1ce61e 100644 ---- a/util/grub.d/20_linux_xen.in -+++ b/util/grub.d/20_linux_xen.in -@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then +Index: grub-2.00/util/grub.d/20_linux_xen.in +=================================================================== +--- grub-2.00.orig/util/grub.d/20_linux_xen.in ++++ grub-2.00/util/grub.d/20_linux_xen.in +@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; th OS=GNU/Linux else OS="${GRUB_DISTRIBUTOR} GNU/Linux" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) ${CLASS}" -+ CLASS="--class '$(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1)' ${CLASS}" ++ CLASS="--class '$(echo -n "${GRUB_DISTRIBUTOR}" | sed -r 's/[^[:alnum:]]+/-/g; s/(^-|-$)//g' | tr 'A-Z' 'a-z')' ${CLASS}" fi # loop-AES arranges things so that /dev/loop/X can be our root device, but --- -1.7.3.4 - -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit grub2 for openSUSE:Factory
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package grub2 for openSUSE:Factory checked in at 2013-02-21 15:32:16 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/grub2 (Old) and /work/SRC/openSUSE:Factory/.grub2.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "grub2", Maintainer is "MChang(a)suse.com" Changes: -------- --- /work/SRC/openSUSE:Factory/grub2/grub2.changes 2013-02-07 14:16:22.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.grub2.new/grub2.changes 2013-02-21 15:32:21.000000000 +0100 @@ -1,0 +2,23 @@ +Tue Feb 19 15:38:04 UTC 2013 - duwe(a)suse.com + + Fix up bogus items from the previous merge: + - efi_libdir = _libdir = /usr/lib + - package /usr/lib/grub2 dir only once + - move grub.efi to /usr/lib/grub2/%{grubefiarch}/ + - create a symlink so that scripts can find it there. + +------------------------------------------------------------------- +Thu Feb 14 11:42:40 UTC 2013 - duwe(a)suse.com + +- merge internal+external BS changes into superset spec file, + remove obsolete dependencies +- merge SLES+openSUSE patches, restrict "grub-efi" to 12.2 +- add efidisk-ahci-workaround (bnc#794674) +- fix unquoted-string-in-class.patch (bnc#788322) + +------------------------------------------------------------------- +Fri Feb 8 01:58:22 UTC 2013 - mchang(a)suse.com + +- adapt to pesign-obs-integration changes + +------------------------------------------------------------------- @@ -6,0 +30,5 @@ +Thu Jan 31 16:18:56 UTC 2013 - duwe(a)suse.com + +- switch to out of source / subdir build + +------------------------------------------------------------------- @@ -24,0 +53,13 @@ +Tue Jan 29 02:42:28 UTC 2013 - mchang(a)suse.com + +- set empty prefix to grub.efi for looking up in current directory +- remove grubcd.efi, as grub.efi can now be used for cdrom booting + +------------------------------------------------------------------- +Mon Jan 28 08:05:52 CET 2013 - snwint(a)suse.de + +- add fat module to grubcd +- explicitly set empty prefix to get grub to set $prefix to the currrent + directory + +------------------------------------------------------------------- @@ -31,0 +73,10 @@ +Fri Jan 18 06:24:57 UTC 2013 - mchang(a)suse.com + +- ship a Secure Boot UEFI compatible bootloader (fate#314485). +- update for cdrom boot support. +- grub2-cdpath.patch: fix the grub.cfg not found when booting from + optical disk. +- grubcd.efi: the efi image used for optial disk booting, with + reduced size and $prefix set to /EFI/BOOT. + +------------------------------------------------------------------- @@ -51,0 +103,20 @@ + +------------------------------------------------------------------- +Fri Dec 21 04:18:06 UTC 2012 - mchang(a)suse.com + +- put 32-bit grub2 modules to /usr/lib/grub2 +- put 64-bit grub2 modules to /usr/lib64/grub2 (x86_64-efi) +- put grub.efi to /usr/lib64/efi(x86_64) or /usr/lib/efi(i586) + +------------------------------------------------------------------- +Tue Dec 18 03:43:38 UTC 2012 - mchang(a)suse.com + +- ship a Secure Boot UEFI compatible bootloader (fate#314485) +- add grub2-secureboot-chainloader.patch, which expands the efi + chainloader to be able to verify images via shim lock protocol. + +------------------------------------------------------------------- +Fri Nov 30 06:39:15 UTC 2012 - mchang(a)suse.com + +- replace %{sles_version} by %{suse_version} +- use correct product name New: ---- efidisk-ahci-workaround ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ grub2.spec ++++++ --- /var/tmp/diff_new_pack.MWkjo0/_old 2013-02-21 15:32:24.000000000 +0100 +++ /var/tmp/diff_new_pack.MWkjo0/_new 2013-02-21 15:32:24.000000000 +0100 @@ -15,6 +15,7 @@ # Please submit bugfixes or comments via http://bugs.opensuse.org/ # + # needssslcertforbuild Name: grub2 @@ -43,18 +44,14 @@ BuildRequires: texinfo %endif BuildRequires: python -BuildRequires: ruby BuildRequires: xz-devel -%if 0%{?suse_version} == 1210 -BuildRequires: guile -%endif %ifarch x86_64 -%if 0%{?suse_version} >= 1230 +%if 0%{?suse_version} >= 1230 || 0%{?sles_version} >= 11 BuildRequires: pesign-obs-integration %endif %endif -# Modules always contain just 32-bit code +# Modules code is dynamically loaded and collected from a _fixed_ path. %define _libdir %{_exec_prefix}/lib %ifarch ppc ppc64 @@ -82,7 +79,7 @@ %endif %endif -%if 0%{?sles_version} == 11 +%if 0%{?suse_version} == 1110 || 0%{?sles_version} == 11 %define only_efi %{nil} %define only_x86_64 %{nil} %endif @@ -135,6 +132,7 @@ Patch28: grub2-fix-unquoted-string-in-class.patch Patch29: grub2-secureboot-chainloader.patch Patch30: grub2-cdpath.patch +Patch31: efidisk-ahci-workaround PreReq: perl-Bootloader Requires: gettext-runtime %if 0%{?suse_version} >= 1140 @@ -155,20 +153,26 @@ %endif %description -This is the second version of the GRUB (Grand Unified Bootloader), -a highly configurable and customizable bootloader with modular -architecture. It supports rich scale of kernel formats, file systems, +This is the second version of the GRUB (Grand Unified Bootloader), a +highly configurable and customizable bootloader with modular +architecture. It support rich scale of kernel formats, file systems, computer architectures and hardware devices. -PLEASE NOTE: This is a development snapshot, and as such will not -replace grub if you install it, but will be merely added as another -kernel to your existing GRUB menu. Do not replace GRUB (grub package) -with it unless you know what are you doing. Refer to README.openSUSE -file that is part of this package's documentation for more information. + + +Authors: +-------- + Gordon Matzigkeit + Yoshinori K. Okuji + Colin Watson + Colin D. Bennett + Vesa J��skel�inen + Robert Millan + Carles Pina %package %{grubarch} -Summary: GRUB2 for %{platform} systems +Summary: Bootloader with support for Linux, Multiboot and more Group: System/Boot %description %{grubarch} @@ -178,23 +182,36 @@ provides support for %{platform} systems. %ifarch %{efi} - +%if 0%{?suse_version} == 1220 || 0%{?suse_version} == 1230 %package efi -Summary: GRUB2 for EFI systems +Summary: Bootloader with support for Linux, Multiboot and more Group: System/Boot PreReq: %{name} = %{version}-%{release} PreReq: %{name}-%{grubefiarch} = %{version}-%{release} %description efi -The GRand Unified Bootloader (GRUB) is a highly configurable and customizable -bootloader with modular architecture. It supports rich variety of kernel formats, -file systems, computer architectures and hardware devices. This subpackage -provides compatibility to old package and install new required one. +This is the second version of the GRUB (Grand Unified Bootloader), a +highly configurable and customizable bootloader with modular +architecture. It support rich scale of kernel formats, file systems, +computer architectures and hardware devices. + + + +Authors: +-------- + Gordon Matzigkeit + Yoshinori K. Okuji + Colin Watson + Colin D. Bennett + Vesa J��skel�inen + Robert Millan + Carles Pina +%endif %package %{grubefiarch} -Summary: GRUB2 for EFI systems +Summary: Bootloader with support for Linux, Multiboot and more Group: System/Boot %ifarch ia64 x86_64 #Package is available on ia64 and x86_64 only and not necessarily needed @@ -211,14 +228,12 @@ %prep # We create (if we build for efi) two copies of the sources in the Builddir -%setup -q -T -c -n grub-%{version} -a 0 -a 5 -cp -r po grub-%{version}/ -cd grub-%{version} +%setup -q -n grub-%{version} -a 5 (cd po && ls *.po | cut -d. -f1 | xargs) >po/LINGUAS %patch0 -p1 %patch1 -p1 # Workaround SLE11's patch utility did not rename the file for us -%if 0%{?sles_version} == 11 +%if 0%{?suse_version} == 1110 || 0%{?sles_version} == 11 mv docs/grub.texi docs/grub2.texi %endif %patch2 -p1 @@ -252,28 +267,38 @@ %patch28 -p1 %patch29 -p1 %patch30 -p1 -cd .. +%patch31 -p1 # README.openSUSE -cp %{SOURCE3} grub-%{version}/ -cp %{SOURCE8} grub-%{version}/ -cp %{SOURCE9} grub-%{version}/grub-core/ +cp %{SOURCE3} . +cp %{SOURCE8} . +cp %{SOURCE9} grub-core/. +mkdir build %ifarch %{efi} -(cp -a grub-%{version} grub-efi-%{version}) +mkdir build-efi %endif %build -%ifarch %{efi} -cd grub-efi-%{version} autoreconf -vi -# we don't want to let rpm to override *FLAGS by bogus ones +# Not yet: +%define common_conf_options TARGET_LDFLAGS=-static --program-transform-name=s,grub,%{name}, +# This does NOT work on SLE11: +%define _configure ../configure + +# We don't want to let rpm override *FLAGS with default a.k.a bogus values. CFLAGS="-fno-strict-aliasing -fno-inline-functions-called-once " CXXFLAGS=" " FFLAGS=" " export CFLAGS CXXFLAGS FFLAGS -%configure \ + +%ifarch %{efi} +cd build-efi +../configure \ TARGET_LDFLAGS=-static \ + --prefix=%{_prefix} \ + --sysconfdir=%{_sysconfdir} \ --target=%{_target_platform} \ + --libdir=%{_libdir} \ --with-platform=efi \ --program-transform-name=s,grub,%{name}, make %{?_smp_mflags} @@ -282,10 +307,10 @@ FS_MODULES="ext2 btrfs ext2 xfs jfs reiserfs" CD_MODULES=" all_video boot cat chain configfile echo \ - efinet fat font gfxmenu gfxterm gzio halt iso9660 \ + efinet font gfxmenu gfxterm gzio halt iso9660 \ jpeg minicmd normal part_apple part_msdos part_gpt \ password_pbkdf2 png reboot search search_fs_uuid \ - search_fs_file search_label sleep test video" + search_fs_file search_label sleep test video fat" %ifarch x86_64 CD_MODULES="${CD_MODULES} linuxefi" @@ -303,14 +328,7 @@ %endif %if ! 0%{?only_efi:1} -cd grub-%{version} -autoreconf -vi - -# we don't want to let rpm to override *FLAGS by bogus ones -CFLAGS="-fno-strict-aliasing -fno-inline-functions-called-once " -CXXFLAGS=" " -FFLAGS=" " -export CFLAGS CXXFLAGS FFLAGS +cd build # 64-bit x86-64 machines use 32-bit boot loader # (We cannot just redefine _target_cpu, as we'd get i386.rpm packages then) @@ -324,26 +342,27 @@ # -static is needed so that autoconf script is able to link # test that looks for _start symbol on 64 bit platforms -%configure TARGET_LDFLAGS=-static \ +../configure TARGET_LDFLAGS=-static \ + --prefix=%{_prefix} \ + --sysconfdir=%{_sysconfdir} \ --target=%{_target_platform} \ --with-platform=%{platform} \ %{extraconfigure} \ --program-transform-name=s,grub,%{name}, - make %{?_smp_mflags} %endif %install %ifarch %{efi} -cd grub-efi-%{version} -make DESTDIR=$RPM_BUILD_ROOT install - -install -m 644 grub.efi $RPM_BUILD_ROOT%{_libdir}/%{name}/%{grubefiarch}/grub.efi %ifarch x86_64 -%if 0%{?suse_version} >= 1230 +%if 0%{?suse_version} >= 1230 || 0%{?sles_version} >= 11 export BRP_PESIGN_FILES="%{_libdir}/%{name}/%{grubefiarch}/grub.efi" %endif %endif +cd build-efi +make DESTDIR=$RPM_BUILD_ROOT install + +install -m 644 grub.efi $RPM_BUILD_ROOT%{_libdir}/%{name}/%{grubefiarch}/. # Create grub.efi link to system efi directory # This is for tools like kiwi not fiddling with the path @@ -359,10 +378,10 @@ %endif %if ! 0%{?only_efi:1} -cd grub-%{version} +cd build make DESTDIR=$RPM_BUILD_ROOT install %else -cd grub-efi-%{version} +cd build-efi %endif # Script that makes part of grub.cfg persist across updates @@ -382,6 +401,7 @@ %endif %ifarch %{efi} +%if 0%{?suse_version} == 1220 || 0%{?suse_version} == 1230 # grub2-efi compatibility links until other packages are fixed ln -sf %{name}-editenv $RPM_BUILD_ROOT%{_bindir}/%{name}-efi-editenv ln -sf %{name}-set-default $RPM_BUILD_ROOT%{_sbindir}/%{name}-efi-set-default @@ -389,6 +409,7 @@ ln -sf %{name}-install $RPM_BUILD_ROOT%{_sbindir}/%{name}-efi-install ln -sf %{name} $RPM_BUILD_ROOT/boot/%{name}-efi %endif +%endif # Defaults install -m 644 -D %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/default/grub @@ -441,6 +462,7 @@ %endif %ifarch %{efi} +%if 0%{?suse_version} == 1220 || 0%{?suse_version} == 1230 %triggerpostun -- %{name}-efi @@ -506,6 +528,7 @@ fi exit 0 %endif +%endif %preun if [ $1 = 0 ]; then @@ -543,16 +566,16 @@ %endif fi %if 0%{?only_efi:1} -%define source_dir grub-efi-%{version} +%define source_dir build-efi %else -%define source_dir grub-%{version} +%define source_dir build %endif %files -f %{source_dir}/%{name}.lang %defattr(-,root,root,-) -%doc %{source_dir}/COPYING %{source_dir}/NEWS %{source_dir}/README -%doc %{source_dir}/THANKS %{source_dir}/TODO %{source_dir}/ChangeLog -%doc %{source_dir}/README.openSUSE +%doc COPYING NEWS README +%doc THANKS TODO ChangeLog +%doc README.openSUSE %dir /boot/%{name} %ghost /boot/%{name}/grub.cfg %{_sysconfdir}/bash_completion.d/grub @@ -593,6 +616,7 @@ %{_infodir}/%{name}.info* %if ! 0%{?only_efi:1} + %files %{grubarch} %defattr(-,root,root,-) %dir %{_libdir}/%{name}/%{grubarch} @@ -613,14 +637,17 @@ %endif %ifarch %{efi} + +%if 0%{?suse_version} == 1220 || 0%{?suse_version} == 1230 %files efi %defattr(-,root,root,-) -%doc %{source_dir}/README +%doc README %ghost /boot/grub2-efi %{_sbindir}/grub2-efi-install %{_sbindir}/grub2-efi-mkconfig %{_sbindir}/grub2-efi-set-default %{_bindir}/grub2-efi-editenv +%endif %files %{grubefiarch} %defattr(-,root,root,-) ++++++ efidisk-ahci-workaround ++++++ >From 61474615b8e177881caa89fc04cae16019cf01b9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett <mjg(a)redhat.com> Date: Wed, 15 Aug 2012 14:37:07 -0400 Subject: [PATCH] efidisk: Read chunks in smaller blocks --- grub-core/disk/efi/efidisk.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/grub-core/disk/efi/efidisk.c b/grub-core/disk/efi/efidisk.c index a432b44..77ab5b0 100644 --- a/grub-core/disk/efi/efidisk.c +++ b/grub-core/disk/efi/efidisk.c @@ -546,6 +546,9 @@ grub_efidisk_read (struct grub_disk *disk, grub_disk_addr_t sector, struct grub_efidisk_data *d; grub_efi_block_io_t *bio; grub_efi_status_t status; + grub_size_t remaining = size; + grub_size_t read = 0; + grub_size_t chunk = 0x500; d = disk->data; bio = d->block_io; @@ -554,14 +557,29 @@ grub_efidisk_read (struct grub_disk *disk, grub_disk_addr_t sector, "reading 0x%lx sectors at the sector 0x%llx from %s\n", (unsigned long) size, (unsigned long long) sector, disk->name); + while (remaining > chunk) { + status = efi_call_5 (bio->read_blocks, bio, bio->media->media_id, + (grub_efi_uint64_t) sector + read, + (grub_efi_uintn_t) chunk << disk->log_sector_size, + buf + (read << disk->log_sector_size)); + if (status != GRUB_EFI_SUCCESS) + return grub_error (GRUB_ERR_READ_ERROR, + N_("failure reading sector 0x%llx from `%s'"), + (unsigned long long) sector + read, + disk->name); + read += chunk; + remaining -= chunk; + } + status = efi_call_5 (bio->read_blocks, bio, bio->media->media_id, - (grub_efi_uint64_t) sector, - (grub_efi_uintn_t) size << disk->log_sector_size, - buf); + (grub_efi_uint64_t) sector + read, + (grub_efi_uintn_t) remaining << disk->log_sector_size, + buf + (read << disk->log_sector_size)); + if (status != GRUB_EFI_SUCCESS) return grub_error (GRUB_ERR_READ_ERROR, N_("failure reading sector 0x%llx from `%s'"), - (unsigned long long) sector, + (unsigned long long) sector + read, disk->name); return GRUB_ERR_NONE; -- 1.7.11.2 ++++++ grub2-fix-unquoted-string-in-class.patch ++++++ --- /var/tmp/diff_new_pack.MWkjo0/_old 2013-02-21 15:32:24.000000000 +0100 +++ /var/tmp/diff_new_pack.MWkjo0/_new 2013-02-21 15:32:24.000000000 +0100 @@ -20,58 +20,55 @@ util/grub.d/20_linux_xen.in | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) -diff --git a/util/grub.d/10_hurd.in b/util/grub.d/10_hurd.in -index 45f0ad3..5afc079 100644 ---- a/util/grub.d/10_hurd.in -+++ b/util/grub.d/10_hurd.in -@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then +Index: grub-2.00/util/grub.d/10_hurd.in +=================================================================== +--- grub-2.00.orig/util/grub.d/10_hurd.in ++++ grub-2.00/util/grub.d/10_hurd.in +@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; th OS=GNU else OS="${GRUB_DISTRIBUTOR} GNU/Hurd" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) ${CLASS}" -+ CLASS="--class '$(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1)' ${CLASS}" ++ CLASS="--class '$(echo -n "${GRUB_DISTRIBUTOR}" | sed -r 's/[^[:alnum:]]+/-/g; s/(^-|-$)//g' | tr 'A-Z' 'a-z')' ${CLASS}" fi at_least_one=false -diff --git a/util/grub.d/10_kfreebsd.in b/util/grub.d/10_kfreebsd.in -index b0e84e2..4ec8d96 100644 ---- a/util/grub.d/10_kfreebsd.in -+++ b/util/grub.d/10_kfreebsd.in +Index: grub-2.00/util/grub.d/10_kfreebsd.in +=================================================================== +--- grub-2.00.orig/util/grub.d/10_kfreebsd.in ++++ grub-2.00/util/grub.d/10_kfreebsd.in @@ -30,7 +30,7 @@ CLASS="--class os" case "${GRUB_DISTRIBUTOR}" in Debian) OS="${GRUB_DISTRIBUTOR} GNU/kFreeBSD" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) --class gnu-kfreebsd --class gnu ${CLASS}" -+ CLASS="--class '$(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1)' --class gnu-kfreebsd --class gnu ${CLASS}" ++ CLASS="--class '$(echo -n "${GRUB_DISTRIBUTOR}" | sed -r 's/[^[:alnum:]]+/-/g; s/(^-|-$)//g' | tr 'A-Z' 'a-z')' --class gnu-kfreebsd --class gnu ${CLASS}" ;; *) OS="FreeBSD" -diff --git a/util/grub.d/10_linux.in b/util/grub.d/10_linux.in -index b2f65c0..40f8651 100644 ---- a/util/grub.d/10_linux.in -+++ b/util/grub.d/10_linux.in -@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then +Index: grub-2.00/util/grub.d/10_linux.in +=================================================================== +--- grub-2.00.orig/util/grub.d/10_linux.in ++++ grub-2.00/util/grub.d/10_linux.in +@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; th OS=GNU/Linux else OS="${GRUB_DISTRIBUTOR}" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) ${CLASS}" -+ CLASS="--class '$(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1)' ${CLASS}" ++ CLASS="--class '$(echo -n "${GRUB_DISTRIBUTOR}" | sed -r 's/[^[:alnum:]]+/-/g; s/(^-|-$)//g' | tr 'A-Z' 'a-z')' ${CLASS}" fi # loop-AES arranges things so that /dev/loop/X can be our root device, but -diff --git a/util/grub.d/20_linux_xen.in b/util/grub.d/20_linux_xen.in -index 29184c2..f1ce61e 100644 ---- a/util/grub.d/20_linux_xen.in -+++ b/util/grub.d/20_linux_xen.in -@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then +Index: grub-2.00/util/grub.d/20_linux_xen.in +=================================================================== +--- grub-2.00.orig/util/grub.d/20_linux_xen.in ++++ grub-2.00/util/grub.d/20_linux_xen.in +@@ -32,7 +32,7 @@ if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; th OS=GNU/Linux else OS="${GRUB_DISTRIBUTOR} GNU/Linux" - CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1) ${CLASS}" -+ CLASS="--class '$(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1)' ${CLASS}" ++ CLASS="--class '$(echo -n "${GRUB_DISTRIBUTOR}" | sed -r 's/[^[:alnum:]]+/-/g; s/(^-|-$)//g' | tr 'A-Z' 'a-z')' ${CLASS}" fi # loop-AES arranges things so that /dev/loop/X can be our root device, but --- -1.7.3.4 - -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit patchinfo.1359 for openSUSE:12.3:Update
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package patchinfo.1359 for openSUSE:12.3:Update checked in at 2013-02-21 15:29:16 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:12.3:Update/patchinfo.1359 (Old) and /work/SRC/openSUSE:12.3:Update/.patchinfo.1359.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "patchinfo.1359", Maintainer is "" Changes: -------- New Changes file: NO CHANGES FILE!!! New: ---- _patchinfo ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ _patchinfo ++++++ <patchinfo> <packager>sbrabec</packager> <category>recommended</category> <rating>low</rating> <summary>translation-update: Update to version 12.3</summary> <description>This update fixes the following issues for translation-update: - Set version to 12.3. - Added support for auto-generated translation-update-from-translation-update-upstream tarball with translation updates and added translation-update-from-translation-update-upstream-20130214.tar.bz2 - Added support for last minute translations (translation-update2.tar.bz2). - Added two supplementary scripts that allow to generate package list dynamically (translation-update-reset-lang-list.sh, translation-update-generate-lang-list.sh). - Added translation-update.rpmlintrc. - Small improvements of %build and %install to run faster with cleaner log.</description> </patchinfo> -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit translation-update for openSUSE:12.3:Update
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package translation-update for openSUSE:12.3:Update checked in at 2013-02-21 15:29:12 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:12.3:Update/translation-update (Old) and /work/SRC/openSUSE:12.3:Update/.translation-update.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "translation-update", Maintainer is "gnome-maintainers(a)suse.de" Changes: -------- New Changes file: NO CHANGES FILE!!! New: ---- _link ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ _link ++++++ <link package='translation-update.1359' cicount='copy' /> -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit translation-update.1359 for openSUSE:12.3:Update
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package translation-update.1359 for openSUSE:12.3:Update checked in at 2013-02-21 15:29:07 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:12.3:Update/translation-update.1359 (Old) and /work/SRC/openSUSE:12.3:Update/.translation-update.1359.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "translation-update.1359", Maintainer is "" Changes: -------- New Changes file: --- /dev/null 2013-02-09 11:18:20.872010756 +0100 +++ /work/SRC/openSUSE:12.3:Update/.translation-update.1359.new/translation-update.changes 2013-02-21 15:29:11.000000000 +0100 @@ -0,0 +1,104 @@ +------------------------------------------------------------------- +Mon Feb 18 18:01:25 CET 2013 - sbrabec(a)suse.cz + +- Set version to 12.3. +- Added support for auto-generated + translation-update-from-translation-update-upstream tarball + with translation updates and added + translation-update-from-translation-update-upstream-20130214.tar.bz2 +- Added support for last minute translations + (translation-update2.tar.bz2). +- Added two supplementary scripts that allow to generate package + list dynamically (translation-update-reset-lang-list.sh, + translation-update-generate-lang-list.sh). +- Added translation-update.rpmlintrc. +- Small improvements of %build and %install to run faster with + cleaner log. + +------------------------------------------------------------------- +Thu Apr 14 13:35:32 CEST 2011 - ke(a)suse.de + +- Increase version number to 12.1. +- Reset all translation-update-* packages for 12.1 using + reset-translation-update.sh. + +------------------------------------------------------------------- +Wed Mar 30 17:10:17 CEST 2011 - ke(a)suse.de + +- increase version number to 11.4. +- translation updates mostly because of webyast, but other software + components such as zypper were also affected: + da de es fi fr gl hr hu it ja km lt nb nl pl ro ru wa pt_BR. + +------------------------------------------------------------------- +Fri May 14 14:54:32 CEST 2010 - ke(a)suse.de + +- reset-translation-update.sh: Fix sed script. + +------------------------------------------------------------------- +Wed Jan 20 08:18:57 UTC 2010 - coolo(a)novell.com + +- increase version number to 11.3 +- remove authors from description + +------------------------------------------------------------------- +Tue Oct 20 09:33:43 CEST 2009 - ke(a)suse.de + +- Increase version number. + +------------------------------------------------------------------- +Mon Mar 16 15:19:35 CET 2009 - ke(a)suse.de + +- Reset all translation-update-* packages for 11.2. +- reset-translation-update.sh: New helper script. + +------------------------------------------------------------------- +Wed Feb 18 15:06:41 CET 2009 - ke(a)suse.de + +- Also add Wallon (wa) trying to fix bnc#438980. +- Add Punjabi (pa). + +------------------------------------------------------------------- +Tue Feb 17 17:00:34 CET 2009 - ke(a)suse.de + +- General post-GA translation update (bnc#464470). + +------------------------------------------------------------------- +Mon Aug 18 16:00:01 CEST 2008 - ke(a)suse.de + +- Also reset cs and pl (for 11.1); see bnc#404073, + bnc#399561. bnc#402551, bnc#402885, and bnc#407285. + +------------------------------------------------------------------- +Fri Jan 11 14:03:50 CET 2008 - ke(a)suse.de + +- Reset translations for openSUSE 11.0; see #353229. + +------------------------------------------------------------------- +Fri Jan 11 13:31:11 CET 2008 - ke(a)suse.de + +- Update translations: de, es, fi, ja, and pt_BR; #350693. + +------------------------------------------------------------------- +Tue Aug 21 23:58:45 CEST 2007 - ro(a)suse.de + +- completely comment out disabled subpacks + +------------------------------------------------------------------- +Fri Aug 3 16:09:20 CEST 2007 - ke(a)suse.de + +- Add Arabian (ar), African (af, xh, and zu), and Indian (bn, gu, hi, mr, + and ta) and Polish (pl); #281412 and SWAMPID 11144. +- Remove outdated yast translatations. + +------------------------------------------------------------------- +Thu Oct 19 18:33:19 CEST 2006 - jhargadon(a)suse.de + +- added french translations for yelp and zen-updater for bug + #204335 + +------------------------------------------------------------------- +Wed Oct 4 23:13:03 CEST 2006 - jhargadon(a)suse.de + +- initial submission of package + New: ---- AUTHORS COPYING README reset-translation-update.sh translation-update-from-translation-update-upstream-20130214.tar.bz2 translation-update-generate-lang-list.sh translation-update-reset-lang-list.sh translation-update.changes translation-update.rpmlintrc translation-update.spec translation-update.tar.bz2 translation-update2.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ translation-update.spec ++++++ ++++ 1385 lines (skipped) ++++++ AUTHORS ++++++ Gary Ekker <gekker(a)novell.com> Karl Eichwalder <ke(a)suse.de> Stanislav Brabec <sbrabec(a)suse.cz> ++++++ COPYING ++++++ GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the program's name and a brief idea of what it does.> Copyright (C) <year> <name of author> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. ++++++ README ++++++ This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/<locale>/LC_MESSAGES/. Applications that use gettext correctly can then pick up overridden or updated translations from this location. ++++++ reset-translation-update.sh ++++++ #!/bin/bash tar xvf *.bz2 find translation-update -type f -name '*.po' | xargs rm -v tar cvjf translation-update.tar.bz2 translation-update sed -i.bak 's|^$%{_datadir}/locale-langpack$|#\1| s|^$%dir %{_datadir}/locale-langpack$|#\1|' *.spec exit 0 ++++++ translation-update-generate-lang-list.sh ++++++ #!/bin/bash # Generate lang list for spec file. # Usage: # 1. sh ./translation-update-reset-lang-list.sh # 2. osc build # it will fail # 3. sh ./translation-update-generate-lang-list.sh BUILD_ROOT=/var/tmp/build-root BUILDROOT=/home/abuild/rpmbuild/BUILDROOT LNG_LIST=$(sed -n '/Installed (but unpackaged) file(s) found:/,$s:.* */usr/share/locale-langpack/$.*$/LC_MESSAGES/.*:\1:p' $BUILD_ROOT/.build.log | sort -u) LNG_COUNT=0 for LNG in $LNG_LIST ; do LNG_NAME= # Handle special cases manually: case $LNG in zh_CN ) LNG_NAME="Simplified Chinese" ;; zh_TW ) LNG_NAME="Traditional Chinese" ;; esac if test -n "$LNG_NAME" ; then LNG_NAMES[LNG_COUNT++]=$LNG_NAME continue fi # Guess language name from Language-Team catalog file keyword for FILE in $BUILD_ROOT$BUILDROOT/translation-update*/usr/share/locale-langpack/$LNG/LC_MESSAGES/*.mo ; do LNG_NAME=$(msgunfmt $FILE 2>/dev/null | sed -n 's/^"Language-Team: *$[^<\]*$ *.*"$/\1/p') LNG_NAME=${LNG_NAME%% } LNG_NAME=${LNG_NAME% (http*} LNG_NAME=${LNG_NAME% Team} LNG_NAME=${LNG_NAME% Translation} LNG_NAME=${LNG_NAME#GNOME } LNG_NAME=${LNG_NAME% GNOME} # for ug: LNG_NAME=${LNG_NAME% Computer Science Association} # for ml: LNG_NAME=${LNG_NAME#Swathanthra } LNG_NAME=${LNG_NAME% Computing} # Do not accept the default value "American English" for anything else than en_US. if test "$LNG_NAME" = "American English" -a "$LNG" != en_US ; then continue fi # Do not accept national names. We search for English name. if ! echo "$LNG_NAME" | iconv -f UTF-8 -t ASCII >/dev/null 2>&1 ; then continue fi # Errorneous cases. case "$LNG_NAME" in # nb # Do not accept "Novell Language" generated by Novell translation tools. # Do not accept underbar. It means that translator filled LANG variable name. # Do not accept e-mails. "Kjartan Maraas" | "Novell Language" | *_* | *@* | */* ) continue ;; esac if test -n "$LNG_NAME" ; then break fi done LNG_NAMES[LNG_COUNT++]=$LNG_NAME done echo echo "Please review following language names and fix them, if needed:" LNG_COUNT=0 for LNG in $LNG_LIST ; do echo "$LNG: ${LNG_NAMES[LNG_COUNT++]}" done LNG_COUNT=0 for LNG in $LNG_LIST ; do cat <<EOF %package -n translation-update-$LNG Summary: Translation Updates for ${LNG_NAMES[LNG_COUNT]} Group: System/Localization Provides: locale(translation-update:$LNG) Requires: translation-update %description -n translation-update-$LNG This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/<locale>/LC_MESSAGES/. Applications that use gettext correctly can then pick up overridden or updated translations from this location. EOF let LNG_COUNT++ done >translation-update.spec.preamble.tmp for LNG in $LNG_LIST ; do cat <<EOF %files -n translation-update-$LNG %defattr(-,root,root) %dir %{_datadir}/locale-langpack %lang($LNG) %{_datadir}/locale-langpack/$LNG %doc COPYING EOF done >translation-update.spec.files.tmp bash ./translation-update-reset-lang-list.sh sed -i ' /^%prep$/{ r translation-update.spec.preamble.tmp a %prep /^%prep$/d } /^%changelog$/{ r translation-update.spec.files.tmp a %changelog /^%changelog$/d } ' translation-update.spec rm translation-update.spec.preamble.tmp translation-update.spec.files.tmp ++++++ translation-update-reset-lang-list.sh ++++++ #!/bin/bash # Reset lang list for spec file. # Usage: # When build fails on missing on superfluous language packages, call: # 1. sh ./translation-update-reset-lang-list.sh # 2. osc build # it will fail # 3. sh ./translation-update-generate-lang-list.sh sed -i ' /^%package -n/,/^%prep$/c \ %prep /^%files -n/,/^%changelog$/c \ %changelog ' translation-update.spec ++++++ translation-update.rpmlintrc ++++++ # rpmlint is not aware, that this package is a translation package. addFilter("package-with-huge-translation")

1 0

commit yast2-update for openSUSE:12.3
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package yast2-update for openSUSE:12.3 checked in at 2013-02-21 15:16:58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:12.3/yast2-update (Old) and /work/SRC/openSUSE:12.3/.yast2-update.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "yast2-update", Maintainer is "jsuchome(a)suse.com" Changes: -------- --- /work/SRC/openSUSE:12.3/yast2-update/yast2-update.changes 2013-01-31 01:47:19.000000000 +0100 +++ /work/SRC/openSUSE:12.3/.yast2-update.new/yast2-update.changes 2013-02-21 15:17:00.000000000 +0100 @@ -1,0 +2,6 @@ +Thu Feb 21 13:20:38 CET 2013 - jsuchome(a)suse.cz + +- remove references to obsoleted SuSEconfig (bnc#804936) +- 2.23.0 + +------------------------------------------------------------------- Old: ---- yast2-update-2.22.3.tar.bz2 New: ---- yast2-update-2.23.0.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-update.spec ++++++ --- /var/tmp/diff_new_pack.jY9kky/_old 2013-02-21 15:17:01.000000000 +0100 +++ /var/tmp/diff_new_pack.jY9kky/_new 2013-02-21 15:17:01.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package yast2-update # -# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: yast2-update -Version: 2.22.3 +Version: 2.23.0 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build @@ -95,7 +95,6 @@ export CFLAGS="$RPM_OPT_FLAGS -DNDEBUG" export CXXFLAGS="$RPM_OPT_FLAGS -DNDEBUG" -%{?suse_update_config:%{suse_update_config -f}} ./configure --libdir=%{_libdir} --prefix=%{_prefix} --mandir=%{_mandir} # V=1: verbose build in case we used AM_SILENT_RULES(yes) # so that RPM_OPT_FLAGS check works ++++++ yast2-update-2.22.3.tar.bz2 -> yast2-update-2.23.0.tar.bz2 ++++++ ++++ 4599 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/COPYING new/yast2-update-2.23.0/COPYING --- old/yast2-update-2.22.3/COPYING 2012-08-14 19:13:08.000000000 +0200 +++ new/yast2-update-2.23.0/COPYING 2013-02-21 13:36:53.000000000 +0100 @@ -1,12 +1,12 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Copyright (C) 1989, 1991 Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. - Preamble + Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public @@ -15,7 +15,7 @@ General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to +the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not @@ -55,8 +55,8 @@ The precise terms and conditions for copying, distribution and modification follow. - - GNU GENERAL PUBLIC LICENSE + + GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains @@ -110,7 +110,7 @@ License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) - + These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in @@ -168,7 +168,7 @@ access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. - + 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is @@ -225,7 +225,7 @@ This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. - + 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License @@ -255,7 +255,7 @@ of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. - NO WARRANTY + NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN @@ -277,9 +277,9 @@ PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it @@ -303,17 +303,16 @@ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: - Gnomovision version 69, Copyright (C) year name of author + Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. @@ -336,5 +335,5 @@ This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General +library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/Makefile.am.common new/yast2-update-2.23.0/Makefile.am.common --- old/yast2-update-2.22.3/Makefile.am.common 2012-08-13 17:21:44.000000000 +0200 +++ new/yast2-update-2.23.0/Makefile.am.common 2013-02-21 13:36:42.000000000 +0100 @@ -30,7 +30,7 @@ dist-hook: check-syntax CHECK_SYNTAX = true -check-syntax: $(client_DATA) $(ycpchook) +check-syntax: $(client_DATA) $(ycpchook) $(ybcfiles) @if test "$(client_DATA)"; then \ if $(CHECK_SYNTAX); then \ TO_CHECK="$(filter %.ycp,$^)"; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/VERSION new/yast2-update-2.23.0/VERSION --- old/yast2-update-2.22.3/VERSION 2012-08-13 16:26:49.000000000 +0200 +++ new/yast2-update-2.23.0/VERSION 2013-02-21 13:36:35.000000000 +0100 @@ -1 +1 @@ -2.22.3 +2.23.0 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/autodocs-ycp.ami new/yast2-update-2.23.0/autodocs-ycp.ami --- old/yast2-update-2.22.3/autodocs-ycp.ami 2012-08-13 17:21:44.000000000 +0200 +++ new/yast2-update-2.23.0/autodocs-ycp.ami 2013-02-21 13:36:42.000000000 +0100 @@ -1,5 +1,5 @@ # -*- makefile -*- Automake include file -# $Id: autodocs-ycp.ami 57644 2009-06-19 08:38:11Z mvidner $ +# $Id$ # Builds source documentation for YCP sources # Uses ycpdoc diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/configure.in new/yast2-update-2.23.0/configure.in --- old/yast2-update-2.22.3/configure.in 2012-08-13 17:21:44.000000000 +0200 +++ new/yast2-update-2.23.0/configure.in 2013-02-21 13:36:42.000000000 +0100 @@ -1,9 +1,9 @@ dnl configure.in for yast2-update dnl -dnl -- This file is generated by y2autoconf 2.21.6 - DO NOT EDIT! -- +dnl -- This file is generated by y2autoconf 2.23.2 - DO NOT EDIT! -- dnl (edit configure.in.in instead) -AC_INIT(yast2-update, 2.22.3, http://bugs.opensuse.org/, yast2-update) +AC_INIT(yast2-update, 2.23.0, http://bugs.opensuse.org/, yast2-update) dnl Check for presence of file 'RPMNAME' AC_CONFIG_SRCDIR([RPMNAME]) @@ -18,7 +18,7 @@ AM_INIT_AUTOMAKE(tar-ustar -Wno-portability) dnl Important YaST2 variables -VERSION="2.22.3" +VERSION="2.23.0" RPMNAME="yast2-update" MAINTAINER="Jiří Suchomel <jsuchome(a)suse.cz>" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/missing new/yast2-update-2.23.0/missing --- old/yast2-update-2.22.3/missing 2012-08-13 17:21:49.000000000 +0200 +++ new/yast2-update-2.23.0/missing 2013-02-21 13:36:46.000000000 +0100 @@ -1,10 +1,9 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2009-04-28.21; # UTC +scriptversion=2012-01-06.18; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. +# Copyright (C) 1996-2012 Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard(a)iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -26,7 +25,7 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi @@ -34,7 +33,7 @@ sed_output='s/.* --output[ =]$[^ ]*$.*/\1/p' sed_minuso='s/.* -o $[^ ]*$.*/\1/p' -# In the cases where this matters, `missing' is being run in the +# In the cases where this matters, 'missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac @@ -65,7 +64,7 @@ echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: @@ -74,21 +73,20 @@ --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' + aclocal touch file 'aclocal.m4' + autoconf touch file 'configure' + autoheader touch file 'config.h.in' autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c + automake touch all 'Makefile.in' files + bison create 'y.tab.[ch]', if possible, from existing .[ch] + flex create 'lex.yy.c', if possible, from existing .c help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c + lex create 'lex.yy.c', if possible, from existing .c makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + yacc create 'y.tab.[ch]', if possible, from existing .[ch] -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-automake(a)gnu.org>." exit $? @@ -100,8 +98,8 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: Unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; @@ -122,22 +120,13 @@ # Not GNU programs, they don't have --version. ;; - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether + # running '$TOOL --version' or '$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi @@ -149,27 +138,27 @@ case $program in aclocal*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from +WARNING: '$1' is $msg. You should only need it if + you modified 'acinclude.m4' or '${configure_ac}'. You might want + to install the Automake and Perl packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU +WARNING: '$1' is $msg. You should only need it if + you modified '${configure_ac}'. You might want to install the + Autoconf and GNU m4 packages. Grab them from any GNU archive site." touch configure ;; autoheader*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them +WARNING: '$1' is $msg. You should only need it if + you modified 'acconfig.h' or '${configure_ac}'. You might want + to install the Autoconf and GNU m4 packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER($[^)]*$).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" @@ -186,9 +175,9 @@ automake*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. +WARNING: '$1' is $msg. You should only need it if + you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'. + You might want to install the Automake and Perl packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | @@ -197,10 +186,10 @@ autom4te*) echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. +WARNING: '$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU + You can get '$1' as part of Autoconf from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` @@ -220,13 +209,13 @@ bison*|yacc*) echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package +WARNING: '$1' $msg. You should only need it if + you modified a '.y' file. You may need the Bison package in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." + Bison from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then - eval LASTARG="\${$#}" + eval LASTARG=\${$#} case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` @@ -250,13 +239,13 @@ lex*|flex*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package +WARNING: '$1' is $msg. You should only need it if + you modified a '.l' file. You may need the Flex package in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." + Flex from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then - eval LASTARG="\${$#}" + eval LASTARG=\${$#} case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` @@ -273,10 +262,10 @@ help2man*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: '$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." + Help2man package in order for those modifications to take + effect. You can get Help2man from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` @@ -291,12 +280,12 @@ makeinfo*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file +WARNING: '$1' is $msg. You should only need it if + you modified a '.texi' or '.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." + call might also be the consequence of using a buggy 'make' (AIX, + DU, IRIX). You might want to install the Texinfo package or + the GNU make package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` @@ -318,49 +307,14 @@ touch $file ;; - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - *) echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. +WARNING: '$1' is needed, and is $msg. You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, + proper tools for further handling them. Check the 'README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." + some other package would contain this missing '$1' program." exit 1 ;; esac diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/src/config/update.xml new/yast2-update-2.23.0/src/config/update.xml --- old/yast2-update-2.22.3/src/config/update.xml 2012-08-13 14:33:36.000000000 +0200 +++ new/yast2-update-2.23.0/src/config/update.xml 2013-02-21 13:36:35.000000000 +0100 @@ -59,10 +59,6 @@ </source> </postscript> </module> - <module> - <label>Clean Up</label> - <name>inst_suseconfig</name> - </module> <module> <label>Update System Configuration</label> <name>inst_finish</name>

1 0

commit yast2-update for openSUSE:Factory
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package yast2-update for openSUSE:Factory checked in at 2013-02-21 15:16:53 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/yast2-update (Old) and /work/SRC/openSUSE:Factory/.yast2-update.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "yast2-update", Maintainer is "jsuchome(a)suse.com" Changes: -------- --- /work/SRC/openSUSE:Factory/yast2-update/yast2-update.changes 2012-08-16 21:58:40.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.yast2-update.new/yast2-update.changes 2013-02-21 15:16:56.000000000 +0100 @@ -1,0 +2,6 @@ +Thu Feb 21 13:20:38 CET 2013 - jsuchome(a)suse.cz + +- remove references to obsoleted SuSEconfig (bnc#804936) +- 2.23.0 + +------------------------------------------------------------------- Old: ---- yast2-update-2.22.3.tar.bz2 New: ---- yast2-update-2.23.0.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-update.spec ++++++ --- /var/tmp/diff_new_pack.q3rL2g/_old 2013-02-21 15:16:58.000000000 +0100 +++ /var/tmp/diff_new_pack.q3rL2g/_new 2013-02-21 15:16:58.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package yast2-update # -# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: yast2-update -Version: 2.22.3 +Version: 2.23.0 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build @@ -95,7 +95,6 @@ export CFLAGS="$RPM_OPT_FLAGS -DNDEBUG" export CXXFLAGS="$RPM_OPT_FLAGS -DNDEBUG" -%{?suse_update_config:%{suse_update_config -f}} ./configure --libdir=%{_libdir} --prefix=%{_prefix} --mandir=%{_mandir} # V=1: verbose build in case we used AM_SILENT_RULES(yes) # so that RPM_OPT_FLAGS check works ++++++ yast2-update-2.22.3.tar.bz2 -> yast2-update-2.23.0.tar.bz2 ++++++ ++++ 4599 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/COPYING new/yast2-update-2.23.0/COPYING --- old/yast2-update-2.22.3/COPYING 2012-08-14 19:13:08.000000000 +0200 +++ new/yast2-update-2.23.0/COPYING 2013-02-21 13:36:53.000000000 +0100 @@ -1,12 +1,12 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Copyright (C) 1989, 1991 Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. - Preamble + Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public @@ -15,7 +15,7 @@ General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to +the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not @@ -55,8 +55,8 @@ The precise terms and conditions for copying, distribution and modification follow. - - GNU GENERAL PUBLIC LICENSE + + GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains @@ -110,7 +110,7 @@ License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) - + These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in @@ -168,7 +168,7 @@ access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. - + 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is @@ -225,7 +225,7 @@ This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. - + 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License @@ -255,7 +255,7 @@ of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. - NO WARRANTY + NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN @@ -277,9 +277,9 @@ PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it @@ -303,17 +303,16 @@ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: - Gnomovision version 69, Copyright (C) year name of author + Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. @@ -336,5 +335,5 @@ This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General +library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/Makefile.am.common new/yast2-update-2.23.0/Makefile.am.common --- old/yast2-update-2.22.3/Makefile.am.common 2012-08-13 17:21:44.000000000 +0200 +++ new/yast2-update-2.23.0/Makefile.am.common 2013-02-21 13:36:42.000000000 +0100 @@ -30,7 +30,7 @@ dist-hook: check-syntax CHECK_SYNTAX = true -check-syntax: $(client_DATA) $(ycpchook) +check-syntax: $(client_DATA) $(ycpchook) $(ybcfiles) @if test "$(client_DATA)"; then \ if $(CHECK_SYNTAX); then \ TO_CHECK="$(filter %.ycp,$^)"; \ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/VERSION new/yast2-update-2.23.0/VERSION --- old/yast2-update-2.22.3/VERSION 2012-08-13 16:26:49.000000000 +0200 +++ new/yast2-update-2.23.0/VERSION 2013-02-21 13:36:35.000000000 +0100 @@ -1 +1 @@ -2.22.3 +2.23.0 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/autodocs-ycp.ami new/yast2-update-2.23.0/autodocs-ycp.ami --- old/yast2-update-2.22.3/autodocs-ycp.ami 2012-08-13 17:21:44.000000000 +0200 +++ new/yast2-update-2.23.0/autodocs-ycp.ami 2013-02-21 13:36:42.000000000 +0100 @@ -1,5 +1,5 @@ # -*- makefile -*- Automake include file -# $Id: autodocs-ycp.ami 57644 2009-06-19 08:38:11Z mvidner $ +# $Id$ # Builds source documentation for YCP sources # Uses ycpdoc diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/configure.in new/yast2-update-2.23.0/configure.in --- old/yast2-update-2.22.3/configure.in 2012-08-13 17:21:44.000000000 +0200 +++ new/yast2-update-2.23.0/configure.in 2013-02-21 13:36:42.000000000 +0100 @@ -1,9 +1,9 @@ dnl configure.in for yast2-update dnl -dnl -- This file is generated by y2autoconf 2.21.6 - DO NOT EDIT! -- +dnl -- This file is generated by y2autoconf 2.23.2 - DO NOT EDIT! -- dnl (edit configure.in.in instead) -AC_INIT(yast2-update, 2.22.3, http://bugs.opensuse.org/, yast2-update) +AC_INIT(yast2-update, 2.23.0, http://bugs.opensuse.org/, yast2-update) dnl Check for presence of file 'RPMNAME' AC_CONFIG_SRCDIR([RPMNAME]) @@ -18,7 +18,7 @@ AM_INIT_AUTOMAKE(tar-ustar -Wno-portability) dnl Important YaST2 variables -VERSION="2.22.3" +VERSION="2.23.0" RPMNAME="yast2-update" MAINTAINER="Jiří Suchomel <jsuchome(a)suse.cz>" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/missing new/yast2-update-2.23.0/missing --- old/yast2-update-2.22.3/missing 2012-08-13 17:21:49.000000000 +0200 +++ new/yast2-update-2.23.0/missing 2013-02-21 13:36:46.000000000 +0100 @@ -1,10 +1,9 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2009-04-28.21; # UTC +scriptversion=2012-01-06.18; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. +# Copyright (C) 1996-2012 Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard(a)iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -26,7 +25,7 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi @@ -34,7 +33,7 @@ sed_output='s/.* --output[ =]$[^ ]*$.*/\1/p' sed_minuso='s/.* -o $[^ ]*$.*/\1/p' -# In the cases where this matters, `missing' is being run in the +# In the cases where this matters, 'missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac @@ -65,7 +64,7 @@ echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: @@ -74,21 +73,20 @@ --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' + aclocal touch file 'aclocal.m4' + autoconf touch file 'configure' + autoheader touch file 'config.h.in' autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c + automake touch all 'Makefile.in' files + bison create 'y.tab.[ch]', if possible, from existing .[ch] + flex create 'lex.yy.c', if possible, from existing .c help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c + lex create 'lex.yy.c', if possible, from existing .c makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + yacc create 'y.tab.[ch]', if possible, from existing .[ch] -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-automake(a)gnu.org>." exit $? @@ -100,8 +98,8 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: Unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; @@ -122,22 +120,13 @@ # Not GNU programs, they don't have --version. ;; - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether + # running '$TOOL --version' or '$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi @@ -149,27 +138,27 @@ case $program in aclocal*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from +WARNING: '$1' is $msg. You should only need it if + you modified 'acinclude.m4' or '${configure_ac}'. You might want + to install the Automake and Perl packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU +WARNING: '$1' is $msg. You should only need it if + you modified '${configure_ac}'. You might want to install the + Autoconf and GNU m4 packages. Grab them from any GNU archive site." touch configure ;; autoheader*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them +WARNING: '$1' is $msg. You should only need it if + you modified 'acconfig.h' or '${configure_ac}'. You might want + to install the Autoconf and GNU m4 packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER($[^)]*$).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" @@ -186,9 +175,9 @@ automake*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. +WARNING: '$1' is $msg. You should only need it if + you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'. + You might want to install the Automake and Perl packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | @@ -197,10 +186,10 @@ autom4te*) echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. +WARNING: '$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU + You can get '$1' as part of Autoconf from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` @@ -220,13 +209,13 @@ bison*|yacc*) echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package +WARNING: '$1' $msg. You should only need it if + you modified a '.y' file. You may need the Bison package in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." + Bison from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then - eval LASTARG="\${$#}" + eval LASTARG=\${$#} case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` @@ -250,13 +239,13 @@ lex*|flex*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package +WARNING: '$1' is $msg. You should only need it if + you modified a '.l' file. You may need the Flex package in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." + Flex from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then - eval LASTARG="\${$#}" + eval LASTARG=\${$#} case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` @@ -273,10 +262,10 @@ help2man*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: '$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." + Help2man package in order for those modifications to take + effect. You can get Help2man from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` @@ -291,12 +280,12 @@ makeinfo*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file +WARNING: '$1' is $msg. You should only need it if + you modified a '.texi' or '.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." + call might also be the consequence of using a buggy 'make' (AIX, + DU, IRIX). You might want to install the Texinfo package or + the GNU make package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` @@ -318,49 +307,14 @@ touch $file ;; - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - *) echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. +WARNING: '$1' is needed, and is $msg. You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, + proper tools for further handling them. Check the 'README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." + some other package would contain this missing '$1' program." exit 1 ;; esac diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-update-2.22.3/src/config/update.xml new/yast2-update-2.23.0/src/config/update.xml --- old/yast2-update-2.22.3/src/config/update.xml 2012-08-13 14:33:36.000000000 +0200 +++ new/yast2-update-2.23.0/src/config/update.xml 2013-02-21 13:36:35.000000000 +0100 @@ -59,10 +59,6 @@ </source> </postscript> </module> - <module> - <label>Clean Up</label> - <name>inst_suseconfig</name> - </module> <module> <label>Update System Configuration</label> <name>inst_finish</name>

1 0

commit yast2-firstboot for openSUSE:12.3
by root＠hilbert.suse.de 21 Feb '13

21 Feb '13

Hello community, here is the log from the commit of package yast2-firstboot for openSUSE:12.3 checked in at 2013-02-21 15:16:33 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:12.3/yast2-firstboot (Old) and /work/SRC/openSUSE:12.3/.yast2-firstboot.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "yast2-firstboot", Maintainer is "jsuchome(a)suse.com" Changes: -------- --- /work/SRC/openSUSE:12.3/yast2-firstboot/yast2-firstboot.changes 2013-01-31 01:46:57.000000000 +0100 +++ /work/SRC/openSUSE:12.3/.yast2-firstboot.new/yast2-firstboot.changes 2013-02-21 15:16:40.000000000 +0100 @@ -1,0 +2,6 @@ +Thu Feb 21 12:50:00 CET 2013 - jsuchome(a)suse.cz + +- remove references to SuSEconfig (bnc#804936) +- 2.23.1 + +------------------------------------------------------------------- Old: ---- yast2-firstboot-2.23.0.tar.bz2 New: ---- yast2-firstboot-2.23.1.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-firstboot.spec ++++++ --- /var/tmp/diff_new_pack.NFX5jA/_old 2013-02-21 15:16:43.000000000 +0100 +++ /var/tmp/diff_new_pack.NFX5jA/_new 2013-02-21 15:16:43.000000000 +0100 @@ -1,7 +1,7 @@ # # spec file for package yast2-firstboot # -# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: yast2-firstboot -Version: 2.23.0 +Version: 2.23.1 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build ++++++ yast2-firstboot-2.23.0.tar.bz2 -> yast2-firstboot-2.23.1.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-firstboot-2.23.0/Makefile.in new/yast2-firstboot-2.23.1/Makefile.in --- old/yast2-firstboot-2.23.0/Makefile.in 2012-11-07 15:12:45.000000000 +0100 +++ new/yast2-firstboot-2.23.1/Makefile.in 2013-02-21 13:41:43.000000000 +0100 @@ -690,7 +690,7 @@ *.zip*) \ unzip $(distdir).zip ;;\ esac - chmod -R a-w $(distdir); chmod a+w $(distdir) + chmod -R a-w $(distdir); chmod u+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-firstboot-2.23.0/VERSION new/yast2-firstboot-2.23.1/VERSION --- old/yast2-firstboot-2.23.0/VERSION 2012-11-07 15:12:32.000000000 +0100 +++ new/yast2-firstboot-2.23.1/VERSION 2013-02-21 13:41:31.000000000 +0100 @@ -1 +1 @@ -2.23.0 +2.23.1 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-firstboot-2.23.0/configure new/yast2-firstboot-2.23.1/configure --- old/yast2-firstboot-2.23.0/configure 2012-11-07 15:12:44.000000000 +0100 +++ new/yast2-firstboot-2.23.1/configure 2013-02-21 13:41:42.000000000 +0100 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for yast2-firstboot 2.23.0. +# Generated by GNU Autoconf 2.69 for yast2-firstboot 2.23.1. # # Report bugs to <http://bugs.opensuse.org/>. # @@ -579,8 +579,8 @@ # Identity of this package. PACKAGE_NAME='yast2-firstboot' PACKAGE_TARNAME='yast2-firstboot' -PACKAGE_VERSION='2.23.0' -PACKAGE_STRING='yast2-firstboot 2.23.0' +PACKAGE_VERSION='2.23.1' +PACKAGE_STRING='yast2-firstboot 2.23.1' PACKAGE_BUGREPORT='http://bugs.opensuse.org/' PACKAGE_URL='' @@ -1255,7 +1255,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures yast2-firstboot 2.23.0 to adapt to many kinds of systems. +\`configure' configures yast2-firstboot 2.23.1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1326,7 +1326,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of yast2-firstboot 2.23.0:";; + short | recursive ) echo "Configuration of yast2-firstboot 2.23.1:";; esac cat <<\_ACEOF @@ -1406,7 +1406,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -yast2-firstboot configure 2.23.0 +yast2-firstboot configure 2.23.1 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1423,7 +1423,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by yast2-firstboot $as_me 2.23.0, which was +It was created by yast2-firstboot $as_me 2.23.1, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2362,7 +2362,7 @@ # Define the identity of the package. PACKAGE='yast2-firstboot' - VERSION='2.23.0' + VERSION='2.23.1' cat >>confdefs.h <<_ACEOF @@ -2485,7 +2485,7 @@ -VERSION="2.23.0" +VERSION="2.23.1" RPMNAME="yast2-firstboot" MAINTAINER="Jiri Suchomel <jsuchome(a)suse.cz>" @@ -3523,7 +3523,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by yast2-firstboot $as_me 2.23.0, which was +This file was extended by yast2-firstboot $as_me 2.23.1, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -3576,7 +3576,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -yast2-firstboot config.status 2.23.0 +yast2-firstboot config.status 2.23.1 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-firstboot-2.23.0/configure.in new/yast2-firstboot-2.23.1/configure.in --- old/yast2-firstboot-2.23.0/configure.in 2012-11-07 15:12:42.000000000 +0100 +++ new/yast2-firstboot-2.23.1/configure.in 2013-02-21 13:41:37.000000000 +0100 @@ -1,9 +1,9 @@ dnl configure.in for yast2-firstboot dnl -dnl -- This file is generated by y2autoconf 2.23.1 - DO NOT EDIT! -- +dnl -- This file is generated by y2autoconf 2.23.2 - DO NOT EDIT! -- dnl (edit configure.in.in instead) -AC_INIT(yast2-firstboot, 2.23.0, http://bugs.opensuse.org/, yast2-firstboot) +AC_INIT(yast2-firstboot, 2.23.1, http://bugs.opensuse.org/, yast2-firstboot) dnl Check for presence of file 'RPMNAME' AC_CONFIG_SRCDIR([RPMNAME]) @@ -18,7 +18,7 @@ AM_INIT_AUTOMAKE(tar-ustar -Wno-portability) dnl Important YaST2 variables -VERSION="2.23.0" +VERSION="2.23.1" RPMNAME="yast2-firstboot" MAINTAINER="Jiri Suchomel <jsuchome(a)suse.cz>" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-firstboot-2.23.0/src/Firstboot.ycp new/yast2-firstboot-2.23.1/src/Firstboot.ycp --- old/yast2-firstboot-2.23.0/src/Firstboot.ycp 2012-11-07 15:12:25.000000000 +0100 +++ new/yast2-firstboot-2.23.1/src/Firstboot.ycp 2013-02-21 13:41:31.000000000 +0100 @@ -45,7 +45,6 @@ import "Summary"; -global boolean run_suseconfig = false; string script_dir = ""; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-firstboot-2.23.0/src/control/firstboot.xml new/yast2-firstboot-2.23.1/src/control/firstboot.xml --- old/yast2-firstboot-2.23.0/src/control/firstboot.xml 2012-11-07 15:12:25.000000000 +0100 +++ new/yast2-firstboot-2.23.1/src/control/firstboot.xml 2013-02-21 13:41:31.000000000 +0100 @@ -207,12 +207,6 @@ </module> <module> <label>Finish Setup</label> - <name>inst_suseconfig</name> - <enable_back>no</enable_back> - <enable_next>no</enable_next> - </module> - <module> - <label>Finish Setup</label> <name>inst_congratulate</name> </module> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-firstboot-2.23.0/src/firstboot_timezone.ycp new/yast2-firstboot-2.23.1/src/firstboot_timezone.ycp --- old/yast2-firstboot-2.23.0/src/firstboot_timezone.ycp 2012-11-07 15:12:25.000000000 +0100 +++ new/yast2-firstboot-2.23.1/src/firstboot_timezone.ycp 2013-02-21 13:41:31.000000000 +0100 @@ -73,7 +73,6 @@ // Save changes... Timezone::Save(); - Firstboot::run_suseconfig = true; } else { -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0