October 2010 - openSUSE Commits - openSUSE Mailing Lists

commit hdparm for openSUSE:Factory
by root＠hilbert.suse.de 05 Oct '10

05 Oct '10

Hello community, here is the log from the commit of package hdparm for openSUSE:Factory checked in at Tue Oct 5 22:52:12 CEST 2010. -------- --- hdparm/hdparm.changes 2010-09-24 10:56:51.000000000 +0200 +++ hdparm/hdparm.changes 2010-10-05 11:18:08.000000000 +0200 @@ -1,0 +2,9 @@ +Tue Oct 5 09:17:06 UTC 2010 - puzel(a)novell.com + +- update to hdparm-9.33 + * fix AHCI issues in sg16(): don't ask for sense_data + on DATA-xfer commands + * fix compiler warnings on old systems + * fixed compilation on old systems lacking __be16 + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- hdparm-9.32.tar.bz2 New: ---- hdparm-9.33.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ hdparm.spec ++++++ --- /var/tmp/diff_new_pack.DWYKFZ/_old 2010-10-05 22:51:44.000000000 +0200 +++ /var/tmp/diff_new_pack.DWYKFZ/_new 2010-10-05 22:51:44.000000000 +0200 @@ -1,5 +1,5 @@ # -# spec file for package hdparm (Version 9.32) +# spec file for package hdparm (Version 9.33) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -24,7 +24,7 @@ PreReq: %insserv_prereq %fillup_prereq coreutils Provides: base:/sbin/hdparm AutoReqProv: on -Version: 9.32 +Version: 9.33 Release: 1 Summary: A Program to get and set hard disk parameters Source: %{name}-%{version}.tar.bz2 ++++++ hdparm-9.32.tar.bz2 -> hdparm-9.33.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hdparm-9.32/Changelog new/hdparm-9.33/Changelog --- old/hdparm-9.32/Changelog 2010-09-24 08:17:44.000000000 +0200 +++ new/hdparm-9.33/Changelog 2010-10-04 21:42:05.000000000 +0200 @@ -1,3 +1,7 @@ +hdparm-9.33 + - fix AHCI issues in sg16(): don't ask for sense_data on DATA-xfer commands + - fix compiler warnings on old systems + - fixed compilation on old systems lacking __be16 hdparm-9.32 - fix b0rked (since 9.27?) SET_FEATURES commands; eg. -B, -M, etc.. hdparm-9.31 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hdparm-9.32/fallocate.c new/hdparm-9.33/fallocate.c --- old/hdparm-9.32/fallocate.c 2009-08-02 22:14:33.000000000 +0200 +++ new/hdparm-9.33/fallocate.c 2010-10-04 21:38:39.000000000 +0200 @@ -22,6 +22,7 @@ int err; #ifndef SYS_fallocate + bytecount = 0; fprintf(stderr, "Error: this copy of hdparm was built without %s support\n", path); err = EINVAL; #else diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hdparm-9.32/geom.c new/hdparm-9.33/geom.c --- old/hdparm-9.32/geom.c 2009-08-18 15:53:44.000000000 +0200 +++ new/hdparm-9.33/geom.c 2010-10-04 21:40:02.000000000 +0200 @@ -123,7 +123,7 @@ if (verbose) perror(path); } else if (S_ISBLK(st.st_mode)) { - if (major(st.st_rdev) == maj && minor(st.st_rdev) == min) { + if (maj == (unsigned)major(st.st_rdev) && min == (unsigned)minor(st.st_rdev)) { closedir(dp); return 0; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hdparm-9.32/hdparm.8 new/hdparm-9.33/hdparm.8 --- old/hdparm-9.32/hdparm.8 2010-09-24 08:13:00.000000000 +0200 +++ new/hdparm-9.33/hdparm.8 2010-10-04 21:43:11.000000000 +0200 @@ -1,4 +1,4 @@ -.TH HDPARM 8 "September 2010" "Version 9.32" +.TH HDPARM 8 "October 2010" "Version 9.33" .SH NAME hdparm \- get/set SATA/IDE device parameters diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hdparm-9.32/hdparm.c new/hdparm-9.33/hdparm.c --- old/hdparm-9.32/hdparm.c 2010-09-24 08:12:50.000000000 +0200 +++ new/hdparm-9.33/hdparm.c 2010-10-04 21:43:20.000000000 +0200 @@ -35,7 +35,7 @@ extern const char *minor_str[]; -#define VERSION "v9.32" +#define VERSION "v9.33" #ifndef O_DIRECT #define O_DIRECT 040000 /* direct disk access, not easily obtained from headers */ @@ -865,10 +865,9 @@ args[3] = 1; /* sector count */ if (do_drive_cmd(fd, args, 0)) { prefer_ata12 = 0; + memset(args, 0, sizeof(args)); last_identify_op = ATA_OP_PIDENTIFY; args[0] = last_identify_op; - args[1] = 0; - args[2] = 0; args[3] = 1; /* sector count */ if (do_drive_cmd(fd, args, 0)) { perror(" HDIO_DRIVE_CMD(identify) failed"); @@ -1249,7 +1248,7 @@ for (i = 0; i < words; ++i) { __u16 w = idw[i]; - w = (__u16)(__be16)(w); + w = __be16_to_cpu(w); dst[i*2 ] = w >> 8; dst[i*2+1] = w; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hdparm-9.32/hdparm.lsm new/hdparm-9.33/hdparm.lsm --- old/hdparm-9.32/hdparm.lsm 2010-09-24 08:18:35.000000000 +0200 +++ new/hdparm-9.33/hdparm.lsm 2010-10-04 21:42:53.000000000 +0200 @@ -1,8 +1,9 @@ Begin4 Title: hdparm -Version: 9.32 -Entered-date: 2010-09-24 +Version: 9.33 +Entered-date: 2010-10-04 Description: hdparm - get/set hard disk parameters for Linux SATA/IDE drives. + v9.33 Fixed AHCI issues; fixed compilation on older systems v9.32 Fixed various commands broken since 9.27. Eg. -B, -M, etc.. v9.31 Fixed security-erase issues; changed default of --user-master to user v9.30 Restrict LBA range counts for TRIM to what the drive reports it can handle @@ -106,7 +107,7 @@ Maintained-by: mlord(a)pobox.com (Mark Lord) Primary-site: http://sourceforge.net/projects/hdparm/ Alternate-site: http://www.ibiblio.org/pub/Linux/system/hardware - 117K hdparm-9.32.tar.gz + 117K hdparm-9.33.tar.gz 4K hdparm.lsm Platforms: Linux Copying-policy: BSD License diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hdparm-9.32/sgio.c new/hdparm-9.33/sgio.c --- old/hdparm-9.32/sgio.c 2010-09-24 08:17:01.000000000 +0200 +++ new/hdparm-9.33/sgio.c 2010-10-04 20:47:34.000000000 +0200 @@ -167,7 +167,7 @@ unsigned char cdb[SG_ATA_16_LEN]; unsigned char sb[32], *desc; struct scsi_sg_io_hdr io_hdr; - int prefer12 = prefer_ata12; + int prefer12 = prefer_ata12, demanded_sense = 0; if (tf->command == ATA_OP_PIDENTIFY) prefer12 = 0; @@ -184,10 +184,13 @@ } else { cdb[1] = data ? (rw ? SG_ATA_PROTO_PIO_OUT : SG_ATA_PROTO_PIO_IN) : SG_ATA_PROTO_NON_DATA; } - cdb[ 2] = SG_CDB2_CHECK_COND; + + /* libata/AHCI workaround: don't demand sense data for IDENTIFY commands */ if (data) { cdb[2] |= SG_CDB2_TLEN_NSECT | SG_CDB2_TLEN_SECTORS; cdb[2] |= rw ? SG_CDB2_TDIR_TO_DEV : SG_CDB2_TDIR_FROM_DEV; + } else { + cdb[2] = SG_CDB2_CHECK_COND; } if (!prefer12 || tf->is_lba48) { @@ -277,7 +280,7 @@ static int second_try = 0; if (!second_try++) fprintf(stderr, "SG_IO: questionable sense data, results may be incorrect\n"); - } else { + } else if (demanded_sense) { static int second_try = 0; if (!second_try++) fprintf(stderr, "SG_IO: missing sense data, results may be incorrect\n"); diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/hdparm-9.32/sysfs.c new/hdparm-9.33/sysfs.c --- old/hdparm-9.32/sysfs.c 2008-06-17 01:39:28.000000000 +0200 +++ new/hdparm-9.33/sysfs.c 2010-10-04 21:39:20.000000000 +0200 @@ -103,9 +103,9 @@ sprintf(pathtail, "/%s", entry->d_name); if (sysfs_read_attr(path, "/dev", "%u:%u", &maj, &min, verbose)) min = ~minor(dev); - else if (maj != major(dev)) + else if (maj != (unsigned)major(dev)) continue; - if (min == minor(dev) + if (min == (unsigned)minor(dev) || (recurse && sysfs_find_dev2(path, dev, recurse - 1, verbose) == 0)) { closedir(dp); return 0; ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit upower for openSUSE:Factory
by root＠hilbert.suse.de 05 Oct '10

05 Oct '10

Hello community, here is the log from the commit of package upower for openSUSE:Factory checked in at Tue Oct 5 22:51:14 CEST 2010. -------- --- GNOME/upower/upower.changes 2010-09-28 21:26:22.000000000 +0200 +++ upower/upower.changes 2010-10-05 10:23:22.000000000 +0200 @@ -1,0 +2,23 @@ +Tue Oct 5 10:11:02 CEST 2010 - vuntz(a)opensuse.org + +- Update to version 0.9.6: + + Remove devkit-power-gobject + + Bugfixes: + - Allow explicitly disabling libimobiledevice support + - Free GErrors after returning them + - Add missing D-Bus return in up_qos_cancel_request() + - Fix double D-BUS return in up_daemon_*_allowed + - Fix up_polkit_get_subject() D-BUS error return + - Ensure the new device types get valid descriptions in upower + --dump + - Fix compile with the latest PolicyKit release + - Only save by default 7 days data to stop the log files + becoming huge. Fixes rh#634228 + - Do not continue to poll the serial port if there is no Watts + Up Pro adaptor + - Fix the build with new versions of gobject-introspection +- Drop upower-fix-crash.patch: fixed upstream. +- Remove libdevkit-power-gobject1, libdevkit-power-gobject-devel + subpackages. + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- upower-0.9.5.tar.bz2 upower-fix-crash.patch New: ---- upower-0.9.6.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ upower.spec ++++++ --- /var/tmp/diff_new_pack.8IfjEi/_old 2010-10-05 22:46:59.000000000 +0200 +++ /var/tmp/diff_new_pack.8IfjEi/_new 2010-10-05 22:46:59.000000000 +0200 @@ -1,5 +1,5 @@ # -# spec file for package upower (Version 0.9.5) +# spec file for package upower (Version 0.9.6) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -20,14 +20,12 @@ Name: upower Summary: Power Device Enumeration Framework -Version: 0.9.5 -Release: 3 +Version: 0.9.6 +Release: 1 License: GPLv2+ Url: http://upower.freedesktop.org/ Group: System/Daemons Source: %{name}-%{version}.tar.bz2 -# PATCH-FIX-UPSTREAM upower-fix-crash.patch bnc#640940 vuntz(a)opensuse.org -- Fix crash with recent polkit, taken from git -Patch0: upower-fix-crash.patch BuildRequires: dbus-1-glib-devel BuildRequires: gtk-doc BuildRequires: intltool @@ -91,44 +89,9 @@ This package provides a compatibily layer between upower and DeviceKit-power. -%package -n libdevkit-power-gobject1 -License: GPLv2+ -Summary: Power Device Enumeration Framework -Group: System/Daemons -Recommends: DeviceKit-power - -%description -n libdevkit-power-gobject1 -UPower is an abstraction for enumerating power devices, listening to -device events and querying history and statistics. Any application or -service on the system can access the org.freedesktop.UPower service -via the system message bus. Some operations (such as suspending the -system) are restricted using PolicyKit. - -This package provides a compatibily layer between upower and -DeviceKit-power. - -%package -n libdevkit-power-gobject-devel -License: GPLv2+ -Summary: Power Device Enumeration Framework - Development Files -Group: Development/Libraries/Other -Requires: libdevkit-power-gobject1 = %{version} -Requires: glib2-devel -Provides: DeviceKit-power-devel = %{version} - -%description -n libdevkit-power-gobject-devel -UPower is an abstraction for enumerating power devices, listening to -device events and querying history and statistics. Any application or -service on the system can access the org.freedesktop.UPower service -via the system message bus. Some operations (such as suspending the -system) are restricted using PolicyKit. - -This package provides a compatibily layer between upower and -DeviceKit-power. - %lang_package %prep %setup -q -%patch0 -p1 %build export V=1 @@ -150,10 +113,6 @@ %postun -n libupower-glib1 -p /sbin/ldconfig -%post -n libdevkit-power-gobject1 -p /sbin/ldconfig - -%postun -n libdevkit-power-gobject1 -p /sbin/ldconfig - %files %defattr(-,root,root,-) %doc AUTHORS COPYING NEWS README @@ -185,16 +144,6 @@ %{_bindir}/devkit-power %{_libexecdir}/upower/devkit-power-daemon -%files -n libdevkit-power-gobject1 -%defattr(-,root,root,-) -%{_libdir}/libdevkit-power-gobject.so.* - -%files -n libdevkit-power-gobject-devel -%defattr(-,root,root,-) -%{_includedir}/DeviceKit-power/ -%{_libdir}/pkgconfig/devkit-power-gobject.pc -%{_libdir}/libdevkit-power-gobject.so - %files lang -f %{name}.lang %changelog ++++++ upower-0.9.5.tar.bz2 -> upower-0.9.6.tar.bz2 ++++++ ++++ 9370 lines of diff (skipped) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit perl-MailTools for openSUSE:Factory
by root＠hilbert.suse.de 05 Oct '10

05 Oct '10

Hello community, here is the log from the commit of package perl-MailTools for openSUSE:Factory checked in at Tue Oct 5 22:36:43 CEST 2010. -------- --- perl-MailTools/perl-MailTools.changes 2010-02-23 16:43:35.000000000 +0100 +++ perl-MailTools/perl-MailTools.changes 2010-10-05 15:15:21.000000000 +0200 @@ -1,0 +2,8 @@ +Tue Oct 5 15:10:39 CEST 2010 - anicka(a)suse.cz + +- update to 2.07 + * update README: MailTools 2.* require 5.8.1 + * add "MAIL FROM" to Mail::Mailer::smtp, to be able to communicate + with Comcast + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- MailTools-2.06.tar.bz2 New: ---- MailTools-2.07.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ perl-MailTools.spec ++++++ --- /var/tmp/diff_new_pack.zQUKZZ/_old 2010-10-05 22:31:05.000000000 +0200 +++ /var/tmp/diff_new_pack.zQUKZZ/_new 2010-10-05 22:31:05.000000000 +0200 @@ -1,5 +1,5 @@ # -# spec file for package perl-MailTools (Version 2.06) +# spec file for package perl-MailTools (Version 2.07) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -20,7 +20,7 @@ Name: perl-MailTools Url: http://cpan.org/modules/by-module/Mail/ -Version: 2.06 +Version: 2.07 Release: 1 Provides: p_mtools Obsoletes: p_mtools ++++++ MailTools-2.06.tar.bz2 -> MailTools-2.07.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/ChangeLog new/MailTools-2.07/ChangeLog --- old/MailTools-2.06/ChangeLog 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/ChangeLog 2010-10-01 12:39:49.000000000 +0200 @@ -1,6 +1,16 @@ ==== version history for MailTools +version 2.07: Fri Oct 1 12:39:43 CEST 2010 + + Improvements: + + - update README: MailTools 2.* require 5.8.1 + rt.cpan.org#61753 [Alexandre Bouillot] + + - add "MAIL FROM" to Mail::Mailer::smtp, to be able to + communicate with Comcast [David Myers] + version 2.06: Tue Jan 26 10:01:22 CET 2010 Improvements: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/META.yml new/MailTools-2.07/META.yml --- old/MailTools-2.06/META.yml 2010-01-26 10:01:47.000000000 +0100 +++ new/MailTools-2.07/META.yml 2010-10-01 12:39:52.000000000 +0200 @@ -1,20 +1,28 @@ --- #YAML:1.0 -name: MailTools -version: 2.06 -abstract: Various e-mail related modules -license: perl -author: +name: MailTools +version: 2.07 +abstract: Various e-mail related modules +author: - Mark Overmeer <perl(a)overmeer.net> -generated_by: ExtUtils::MakeMaker version 6.42 -distribution_type: module -requires: - Date::Format: 0 - Date::Parse: 0 - IO::Handle: 0 - Net::Domain: 1.05 - Net::SMTP: 1.03 - Test::More: 0 - Test::Pod: 1 +license: perl +distribution_type: module +configure_requires: + ExtUtils::MakeMaker: 0 +build_requires: + ExtUtils::MakeMaker: 0 +requires: + Date::Format: 0 + Date::Parse: 0 + IO::Handle: 0 + Net::Domain: 1.05 + Net::SMTP: 1.03 + Test::More: 0 + Test::Pod: 1 +no_index: + directory: + - t + - inc +generated_by: ExtUtils::MakeMaker version 6.56 meta-spec: - url: http://module-build.sourceforge.net/META-spec-v1.3.html - version: 1.3 + url: http://module-build.sourceforge.net/META-spec-v1.4.html + version: 1.4 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/Makefile.PL new/MailTools-2.07/Makefile.PL --- old/MailTools-2.06/Makefile.PL 2010-01-25 14:27:08.000000000 +0100 +++ new/MailTools-2.07/Makefile.PL 2010-10-01 12:39:49.000000000 +0200 @@ -4,7 +4,7 @@ WriteMakefile ( DISTNAME => 'MailTools' - , VERSION => '2.06' + , VERSION => '2.07' , NAME => 'Mail' , AUTHOR => 'Mark Overmeer <perl(a)overmeer.net>' , ABSTRACT => 'Various e-mail related modules' diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/README new/MailTools-2.07/README --- old/MailTools-2.06/README 2010-01-25 14:27:08.000000000 +0100 +++ new/MailTools-2.07/README 2010-10-01 12:39:49.000000000 +0200 @@ -1,12 +1,13 @@ === README for MailTools + MailTools is a set of Perl modules related to mail applications. These modules are very old (partially written before MIME!). If you start to write a new e-mail application, consider to use MailBox instead (http://perl.overmeer.net/mailbox/) It is a little harder to learn, but at least implements all RFCs correctly. -You require perl 5.005 or later to use this library. When your Perl +You require perl 5.8.1 or later to use this library. When your Perl is older, then use version 1.xx. You install the library by running these commands: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Address.pm new/MailTools-2.07/lib/Mail/Address.pm --- old/MailTools-2.06/lib/Mail/Address.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Address.pm 2010-10-01 12:39:50.000000000 +0200 @@ -4,7 +4,7 @@ # Pod stripped from pm file by OODoc 1.06. package Mail::Address; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use strict; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Cap.pm new/MailTools-2.07/lib/Mail/Cap.pm --- old/MailTools-2.06/lib/Mail/Cap.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Cap.pm 2010-10-01 12:39:50.000000000 +0200 @@ -4,7 +4,7 @@ # Pod stripped from pm file by OODoc 1.06. package Mail::Cap; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use strict; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Field/AddrList.pm new/MailTools-2.07/lib/Mail/Field/AddrList.pm --- old/MailTools-2.06/lib/Mail/Field/AddrList.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Field/AddrList.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ package Mail::Field::AddrList; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Mail::Field'; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Field/Date.pm new/MailTools-2.07/lib/Mail/Field/Date.pm --- old/MailTools-2.06/lib/Mail/Field/Date.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Field/Date.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ package Mail::Field::Date; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Mail::Field'; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Field/Generic.pm new/MailTools-2.07/lib/Mail/Field/Generic.pm --- old/MailTools-2.06/lib/Mail/Field/Generic.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Field/Generic.pm 2010-10-01 12:39:50.000000000 +0200 @@ -4,7 +4,7 @@ # Pod stripped from pm file by OODoc 1.06. package Mail::Field::Generic; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use Carp; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Field.pm new/MailTools-2.07/lib/Mail/Field.pm --- old/MailTools-2.06/lib/Mail/Field.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Field.pm 2010-10-01 12:39:50.000000000 +0200 @@ -4,7 +4,7 @@ # Pod stripped from pm file by OODoc 1.06. package Mail::Field; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use Carp; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Filter.pm new/MailTools-2.07/lib/Mail/Filter.pm --- old/MailTools-2.06/lib/Mail/Filter.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Filter.pm 2010-10-01 12:39:50.000000000 +0200 @@ -5,7 +5,7 @@ use strict; package Mail::Filter; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use Carp; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Header.pm new/MailTools-2.07/lib/Mail/Header.pm --- old/MailTools-2.06/lib/Mail/Header.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Header.pm 2010-10-01 12:39:50.000000000 +0200 @@ -4,7 +4,7 @@ # Pod stripped from pm file by OODoc 1.06. package Mail::Header; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use strict; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Internet.pm new/MailTools-2.07/lib/Mail/Internet.pm --- old/MailTools-2.06/lib/Mail/Internet.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Internet.pm 2010-10-01 12:39:50.000000000 +0200 @@ -4,7 +4,7 @@ # Pod stripped from pm file by OODoc 1.06. package Mail::Internet; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use strict; # use warnings? probably breaking too much code diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Mailer/qmail.pm new/MailTools-2.07/lib/Mail/Mailer/qmail.pm --- old/MailTools-2.06/lib/Mail/Mailer/qmail.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Mailer/qmail.pm 2010-10-01 12:39:50.000000000 +0200 @@ -7,7 +7,7 @@ package Mail::Mailer::qmail; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Mail::Mailer::rfc822'; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Mailer/rfc822.pm new/MailTools-2.07/lib/Mail/Mailer/rfc822.pm --- old/MailTools-2.06/lib/Mail/Mailer/rfc822.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Mailer/rfc822.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ package Mail::Mailer::rfc822; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Mail::Mailer'; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Mailer/sendmail.pm new/MailTools-2.07/lib/Mail/Mailer/sendmail.pm --- old/MailTools-2.06/lib/Mail/Mailer/sendmail.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Mailer/sendmail.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ package Mail::Mailer::sendmail; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Mail::Mailer::rfc822'; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Mailer/smtp.pm new/MailTools-2.07/lib/Mail/Mailer/smtp.pm --- old/MailTools-2.06/lib/Mail/Mailer/smtp.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Mailer/smtp.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ package Mail::Mailer::smtp; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Mail::Mailer::rfc822'; @@ -33,6 +33,8 @@ ${*$self}{sock} = $smtp; $smtp->mail(mailaddress); + $smtp->mail($opt{From}) if $opt{From}; + $smtp->to($_) for @$to; $smtp->data; @@ -84,7 +86,7 @@ package Mail::Mailer::smtp::pipe; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; sub TIEHANDLE diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Mailer/smtps.pm new/MailTools-2.07/lib/Mail/Mailer/smtps.pm --- old/MailTools-2.06/lib/Mail/Mailer/smtps.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Mailer/smtps.pm 2010-10-01 12:39:50.000000000 +0200 @@ -8,7 +8,7 @@ package Mail::Mailer::smtps; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Mail::Mailer::rfc822'; @@ -89,7 +89,7 @@ package Mail::Mailer::smtps::pipe; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; sub TIEHANDLE diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Mailer/testfile.pm new/MailTools-2.07/lib/Mail/Mailer/testfile.pm --- old/MailTools-2.06/lib/Mail/Mailer/testfile.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Mailer/testfile.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ package Mail::Mailer::testfile; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Mail::Mailer::rfc822'; @@ -36,7 +36,7 @@ package Mail::Mailer::testfile::pipe; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; sub TIEHANDLE diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Mailer.pm new/MailTools-2.07/lib/Mail/Mailer.pm --- old/MailTools-2.06/lib/Mail/Mailer.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Mailer.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ package Mail::Mailer; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'IO::Handle'; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Send.pm new/MailTools-2.07/lib/Mail/Send.pm --- old/MailTools-2.06/lib/Mail/Send.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Send.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ use strict; package Mail::Send; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use Carp; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/MailTools-2.06/lib/Mail/Util.pm new/MailTools-2.07/lib/Mail/Util.pm --- old/MailTools-2.06/lib/Mail/Util.pm 2010-01-26 10:01:43.000000000 +0100 +++ new/MailTools-2.07/lib/Mail/Util.pm 2010-10-01 12:39:50.000000000 +0200 @@ -6,7 +6,7 @@ package Mail::Util; use vars '$VERSION'; -$VERSION = '2.06'; +$VERSION = '2.07'; use base 'Exporter'; ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit ntp for openSUSE:Factory
by root＠hilbert.suse.de 05 Oct '10

05 Oct '10

Hello community, here is the log from the commit of package ntp for openSUSE:Factory checked in at Tue Oct 5 22:30:39 CEST 2010. -------- --- ntp/ntp.changes 2010-04-23 13:00:30.000000000 +0200 +++ ntp/ntp.changes 2010-09-28 12:56:36.000000000 +0200 @@ -1,0 +2,5 @@ +Tue Sep 28 10:56:28 UTC 2010 - aj(a)suse.de + +- Handle /var/run as tmpfs + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ ntp.spec ++++++ --- /var/tmp/diff_new_pack.SH9NE5/_old 2010-10-05 22:21:18.000000000 +0200 +++ /var/tmp/diff_new_pack.SH9NE5/_new 2010-10-05 22:21:18.000000000 +0200 @@ -27,7 +27,7 @@ License: BSD3c(or similar) Group: Productivity/Networking/Other Version: 4.2.4p8 -Release: 5 +Release: 10 Summary: Network Time Protocol daemon (version 4) # main source Source0: ntp-%{version}.tar.bz @@ -373,8 +373,8 @@ %attr(0755,ntp,ntp) %dir /var/lib/ntp/drift %{_mandir}/man1/* /var/adm/fillup-templates/* -%attr(0755,ntp,root)/var/lib/ntp/var/run/ntp -/var/run/ntp +%attr(0755,ntp,root) /var/lib/ntp/var/run/ntp +%ghost /var/run/ntp %ghost %config(noreplace) /var/log/ntp /usr/share/omc/svcinfo.d/ntp.xml ++++++ conf.ntp.init ++++++ --- /var/tmp/diff_new_pack.SH9NE5/_old 2010-10-05 22:21:18.000000000 +0200 +++ /var/tmp/diff_new_pack.SH9NE5/_new 2010-10-05 22:21:18.000000000 +0200 @@ -85,6 +85,9 @@ NTPD_PID="${CHROOT_PREFIX}/var/run/ntp/ntpd.pid" NTPD_PID_NOPREFIX="/var/run/ntp/ntpd.pid" +# Create if /var/run is on tmpfs +test -e /var/run/ntp || ln -s ../lib/ntp/var/run/ntp /var/run + function ntpd_is_running() { $0 status >/dev/null } ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit yast2-packager for openSUSE:Factory
by root＠hilbert.suse.de 05 Oct '10

05 Oct '10

Hello community, here is the log from the commit of package yast2-packager for openSUSE:Factory checked in at Tue Oct 5 22:21:06 CEST 2010. -------- --- yast2-packager/yast2-packager.changes 2010-05-31 21:43:08.000000000 +0200 +++ yast2-packager/yast2-packager.changes 2010-10-05 12:47:49.000000000 +0200 @@ -1,0 +2,17 @@ +Tue Oct 5 10:45:54 UTC 2010 - lslezak(a)suse.cz + +- install yast2-online-update-configuration package if needed + (bnc#609778) +- 2.20.1 + +------------------------------------------------------------------- +Fri Sep 10 12:23:08 UTC 2010 - lslezak(a)suse.cz + +- make "Medium #" more translation friendly (bnc#612977), + PackageSlideShow::SetMediaType() function marked as obsoled + (not used anyway) +- clear the installation log for the next run, save some memory + (bnc#576511) +- 2.20.0 + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- yast2-packager-2.19.7.tar.bz2 New: ---- yast2-packager-2.20.1.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-packager.spec ++++++ --- /var/tmp/diff_new_pack.GMadlb/_old 2010-10-05 22:20:01.000000000 +0200 +++ /var/tmp/diff_new_pack.GMadlb/_new 2010-10-05 22:20:01.000000000 +0200 @@ -1,5 +1,5 @@ # -# spec file for package yast2-packager (Version 2.19.7) +# spec file for package yast2-packager (Version 2.20.1) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -19,11 +19,11 @@ Name: yast2-packager -Version: 2.19.7 +Version: 2.20.1 Release: 1 BuildRoot: %{_tmppath}/%{name}-%{version}-build -Source0: yast2-packager-2.19.7.tar.bz2 +Source0: yast2-packager-2.20.1.tar.bz2 Prefix: /usr @@ -100,7 +100,7 @@ (webpin) and installing them via OneClickInstall %prep -%setup -n yast2-packager-2.19.7 +%setup -n yast2-packager-2.20.1 %build %{prefix}/bin/y2tool y2autoconf ++++++ yast2-packager-2.19.7.tar.bz2 -> yast2-packager-2.20.1.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-packager-2.19.7/VERSION new/yast2-packager-2.20.1/VERSION --- old/yast2-packager-2.19.7/VERSION 2010-05-31 21:37:18.000000000 +0200 +++ new/yast2-packager-2.20.1/VERSION 2010-09-30 22:18:59.000000000 +0200 @@ -1 +1 @@ -2.19.7 +2.20.1 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-packager-2.19.7/aclocal.m4 new/yast2-packager-2.20.1/aclocal.m4 --- old/yast2-packager-2.19.7/aclocal.m4 2010-05-31 21:42:28.000000000 +0200 +++ new/yast2-packager-2.20.1/aclocal.m4 2010-10-05 12:46:41.000000000 +0200 @@ -13,8 +13,8 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, -[m4_warning([this file was generated for autoconf 2.65. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],, +[m4_warning([this file was generated for autoconf 2.67. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-packager-2.19.7/configure new/yast2-packager-2.20.1/configure --- old/yast2-packager-2.19.7/configure 2010-05-31 21:42:30.000000000 +0200 +++ new/yast2-packager-2.20.1/configure 2010-10-05 12:46:42.000000000 +0200 @@ -1,13 +1,13 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.65 for yast2-packager 2.19.7. +# Generated by GNU Autoconf 2.67 for yast2-packager 2.20.1. # # Report bugs to <http://bugs.opensuse.org/>. # # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software +# Foundation, Inc. # # # This configure script is free software; the Free Software Foundation @@ -318,7 +318,7 @@ test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p @@ -358,19 +358,19 @@ fi # as_fn_arith -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. +# script with STATUS, using 1 if that was 0. as_fn_error () { - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi - $as_echo "$as_me: error: $1" >&2 + $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error @@ -532,7 +532,7 @@ exec 6>&1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` @@ -551,8 +551,8 @@ # Identity of this package. PACKAGE_NAME='yast2-packager' PACKAGE_TARNAME='yast2-packager' -PACKAGE_VERSION='2.19.7' -PACKAGE_STRING='yast2-packager 2.19.7' +PACKAGE_VERSION='2.20.1' +PACKAGE_STRING='yast2-packager 2.20.1' PACKAGE_BUGREPORT='http://bugs.opensuse.org/' PACKAGE_URL='' @@ -741,8 +741,9 @@ fi case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=$.*$'` ;; - *) ac_optarg=yes ;; + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=$.*$'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -787,7 +788,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*disable-$.*$'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -813,7 +814,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*enable-$[^=]*$'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1017,7 +1018,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*with-$[^=]*$'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1033,7 +1034,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*without-$.*$'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1063,8 +1064,8 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) as_fn_error "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information." + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) @@ -1072,7 +1073,7 @@ # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error "invalid variable name: \`$ac_envvar'" ;; + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1090,13 +1091,13 @@ if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error "missing argument to $ac_option" + as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1119,7 +1120,7 @@ [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1133,8 +1134,8 @@ if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 + $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1149,9 +1150,9 @@ ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error "working directory cannot be determined" + as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error "pwd does not report name of working directory" + as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. @@ -1190,11 +1191,11 @@ fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1220,7 +1221,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures yast2-packager 2.19.7 to adapt to many kinds of systems. +\`configure' configures yast2-packager 2.20.1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1234,7 +1235,7 @@ --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1291,7 +1292,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of yast2-packager 2.19.7:";; + short | recursive ) echo "Configuration of yast2-packager 2.20.1:";; esac cat <<\_ACEOF @@ -1371,10 +1372,10 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -yast2-packager configure 2.19.7 -generated by GNU Autoconf 2.65 +yast2-packager configure 2.20.1 +generated by GNU Autoconf 2.67 -Copyright (C) 2009 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1388,8 +1389,8 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by yast2-packager $as_me 2.19.7, which was -generated by GNU Autoconf 2.65. Invocation command line was +It was created by yast2-packager $as_me 2.20.1, which was +generated by GNU Autoconf 2.67. Invocation command line was $ $0 $@ @@ -1499,11 +1500,9 @@ { echo - cat <<\_ASBOX -## ---------------- ## + $as_echo "## ---------------- ## ## Cache variables. ## -## ---------------- ## -_ASBOX +## ---------------- ##"[] echo # The following way of writing the cache mishandles newlines in values, ( @@ -1537,11 +1536,9 @@ ) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##"[] echo for ac_var in $ac_subst_vars do @@ -1554,11 +1551,9 @@ echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## + $as_echo "## ------------------- ## ## File substitutions. ## -## ------------------- ## -_ASBOX +## ------------------- ##"[] echo for ac_var in $ac_subst_files do @@ -1572,11 +1567,9 @@ fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##"[] echo cat confdefs.h echo @@ -1631,7 +1624,12 @@ ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - ac_site_file1=$CONFIG_SITE + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site @@ -1646,7 +1644,11 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } fi done @@ -1722,7 +1724,7 @@ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## @@ -1739,16 +1741,22 @@ ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - for ac_t in install-sh install.sh shtool; do - if test -f "$ac_dir/$ac_t"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/$ac_t -c" - break 2 - fi - done + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi done if test -z "$ac_aux_dir"; then - as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -1762,7 +1770,7 @@ # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } @@ -1773,16 +1781,16 @@ test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && - as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -1807,7 +1815,7 @@ ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi @@ -1815,7 +1823,7 @@ $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -1840,7 +1848,7 @@ ac_cv_target=$ac_cv_host else ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 fi fi @@ -1848,7 +1856,7 @@ $as_echo "$ac_cv_target" >&6; } case $ac_cv_target in *-*-*) ;; -*) as_fn_error "invalid value of canonical target" "$LINENO" 5;; +*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; esac target=$ac_cv_target ac_save_IFS=$IFS; IFS='-' @@ -1989,11 +1997,11 @@ ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; esac # Do `set' in a subshell so we don't clobber the current shell's @@ -2015,7 +2023,7 @@ # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - as_fn_error "ls -t appears to fail. Make sure there is not a broken + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi @@ -2025,7 +2033,7 @@ # Ok. : else - as_fn_error "newly created file is older than distributed files! + as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 @@ -2253,7 +2261,7 @@ $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -2261,7 +2269,7 @@ all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -2295,7 +2303,7 @@ am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then - as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi @@ -2311,7 +2319,7 @@ # Define the identity of the package. PACKAGE='yast2-packager' - VERSION='2.19.7' + VERSION='2.20.1' cat >>confdefs.h <<_ACEOF @@ -2433,7 +2441,7 @@ -VERSION="2.19.7" +VERSION="2.20.1" RPMNAME="yast2-packager" MAINTAINER="Ladislav Slezak <lslezak(a)suse.cz>" @@ -2526,7 +2534,7 @@ $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -2534,7 +2542,7 @@ all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -2597,7 +2605,7 @@ if test -z "$XGETTEXT" ; then - as_fn_error "xgettext is missing; please install gettext-tools." "$LINENO" 5 + as_fn_error $? "xgettext is missing; please install gettext-tools." "$LINENO" 5 fi Y2DEVTOOLS_PREFIX=`pkg-config --print-errors --variable=prefix yast2-devtools` @@ -2678,7 +2686,7 @@ if test "$YCPDOC" = "false"; then - as_fn_error "ycpdoc is not installed" "$LINENO" 5 + as_fn_error $? "ycpdoc is not installed" "$LINENO" 5 fi # Extract the first word of "ycpmakedep", so it can be a program name with args. set dummy ycpmakedep; ac_word=$2 @@ -2723,7 +2731,7 @@ if test "$YCPMAKEDEP" = "false"; then - as_fn_error "ycpmakedep is not installed" "$LINENO" 5 + as_fn_error $? "ycpmakedep is not installed" "$LINENO" 5 fi # Extract the first word of "ycpc", so it can be a program name with args. set dummy ycpc; ac_word=$2 @@ -2768,16 +2776,16 @@ if test "$YCPC" = "false"; then - as_fn_error "ycpc is not installed" "$LINENO" 5 + as_fn_error $? "ycpc is not installed" "$LINENO" 5 fi as_ac_File=`$as_echo "ac_cv_file_$devtools_yast2dir/data/testsuite/Makefile.testsuite" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $devtools_yast2dir/data/testsuite/Makefile.testsuite" >&5 $as_echo_n "checking for $devtools_yast2dir/data/testsuite/Makefile.testsuite... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval "test \"\${$as_ac_File+set}\"" = set; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "$devtools_yast2dir/data/testsuite/Makefile.testsuite"; then eval "$as_ac_File=yes" else @@ -2787,8 +2795,7 @@ eval ac_res=\$$as_ac_File { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_File"\" = x"yes"; then : else @@ -2920,6 +2927,7 @@ ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' @@ -2936,11 +2944,11 @@ if test -z "${CREATE_PKGCONFIG_TRUE}" && test -z "${CREATE_PKGCONFIG_FALSE}"; then - as_fn_error "conditional \"CREATE_PKGCONFIG\" was never defined. + as_fn_error $? "conditional \"CREATE_PKGCONFIG\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${CREATE_PKGCONFIG_NOARCH_TRUE}" && test -z "${CREATE_PKGCONFIG_NOARCH_FALSE}"; then - as_fn_error "conditional \"CREATE_PKGCONFIG_NOARCH\" was never defined. + as_fn_error $? "conditional \"CREATE_PKGCONFIG_NOARCH\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi @@ -3090,19 +3098,19 @@ (unset CDPATH) >/dev/null 2>&1 && unset CDPATH -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. +# script with STATUS, using 1 if that was 0. as_fn_error () { - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi - $as_echo "$as_me: error: $1" >&2 + $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error @@ -3298,7 +3306,7 @@ test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p @@ -3351,8 +3359,8 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by yast2-packager $as_me 2.19.7, which was -generated by GNU Autoconf 2.65. Invocation command line was +This file was extended by yast2-packager $as_me 2.20.1, which was +generated by GNU Autoconf 2.67. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -3404,11 +3412,11 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -yast2-packager config.status 2.19.7 -configured by $0, generated by GNU Autoconf 2.65, +yast2-packager config.status 2.20.1 +configured by $0, generated by GNU Autoconf 2.67, with options \\"\$ac_cs_config\\" -Copyright (C) 2009 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -3426,11 +3434,16 @@ while test $# != 0 do case $1 in - --*=*) + --*=?*) ac_option=`expr "X$1" : 'X$[^=]*$='` ac_optarg=`expr "X$1" : 'X[^=]*=$.*$'` ac_shift=: ;; + --*=) + ac_option=`expr "X$1" : 'X$[^=]*$='` + ac_optarg= + ac_shift=: + ;; *) ac_option=$1 ac_optarg=$2 @@ -3452,6 +3465,7 @@ $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; @@ -3462,7 +3476,7 @@ ac_cs_silent=: ;; # This is an error. - -*) as_fn_error "unrecognized option: \`$1' + -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" @@ -3523,7 +3537,7 @@ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;; - *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done @@ -3559,7 +3573,7 @@ { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. @@ -3576,7 +3590,7 @@ fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\r' + ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi @@ -3590,18 +3604,18 @@ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -3690,20 +3704,28 @@ else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || as_fn_error "could not setup config files machinery" "$LINENO" 5 + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^$[^=]*=[ ]*$:*/\1/ + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// s/:*$// +x +s/$=[ ]*$.*/\1/ +G +s/\n// s/^[^=]*=[ ]*$// }' fi @@ -3721,7 +3743,7 @@ esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -3749,7 +3771,7 @@ [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" @@ -3776,7 +3798,7 @@ case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -3913,22 +3935,22 @@ $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 +which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} +which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; @@ -3943,7 +3965,7 @@ ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || - as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. @@ -3964,7 +3986,7 @@ exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit $? + $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-packager-2.19.7/configure.in new/yast2-packager-2.20.1/configure.in --- old/yast2-packager-2.19.7/configure.in 2010-05-31 21:42:25.000000000 +0200 +++ new/yast2-packager-2.20.1/configure.in 2010-10-05 12:46:38.000000000 +0200 @@ -3,7 +3,7 @@ dnl -- This file is generated by y2autoconf 2.18.11 - DO NOT EDIT! -- dnl (edit configure.in.in instead) -AC_INIT(yast2-packager, 2.19.7, http://bugs.opensuse.org/, yast2-packager) +AC_INIT(yast2-packager, 2.20.1, http://bugs.opensuse.org/, yast2-packager) dnl Check for presence of file 'RPMNAME' AC_CONFIG_SRCDIR([RPMNAME]) @@ -18,7 +18,7 @@ AM_INIT_AUTOMAKE(tar-ustar -Wno-portability) dnl Important YaST2 variables -VERSION="2.19.7" +VERSION="2.20.1" RPMNAME="yast2-packager" MAINTAINER="Ladislav Slezak <lslezak(a)suse.cz>" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-packager-2.19.7/src/clients/inst_rpmcopy.ycp new/yast2-packager-2.20.1/src/clients/inst_rpmcopy.ycp --- old/yast2-packager-2.19.7/src/clients/inst_rpmcopy.ycp 2010-03-24 08:23:28.000000000 +0100 +++ new/yast2-packager-2.20.1/src/clients/inst_rpmcopy.ycp 2010-09-10 14:37:54.000000000 +0200 @@ -13,7 +13,7 @@ * Packages module : * "installed" * - * $Id: inst_rpmcopy.ycp 61082 2010-03-02 09:10:41Z ug $ + * $Id: inst_rpmcopy.ycp 62480 2010-09-10 12:37:54Z lslezak $ */ { @@ -452,6 +452,10 @@ SCR::RegisterNewAgents(); } } - + + // clear the installation log for the next run, save some memory + y2milestone("Resetting SlideShow installation log"); + SlideShow::inst_log = ""; + return result; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-packager-2.19.7/src/clients/sw_single.ycp new/yast2-packager-2.20.1/src/clients/sw_single.ycp --- old/yast2-packager-2.19.7/src/clients/sw_single.ycp 2010-04-19 09:30:44.000000000 +0200 +++ new/yast2-packager-2.20.1/src/clients/sw_single.ycp 2010-10-05 12:46:34.000000000 +0200 @@ -7,7 +7,7 @@ * Purpose: contains dialog loop for workflows: * "Install/Remove software" * - * $Id: sw_single.ycp 61741 2010-04-19 07:30:43Z lslezak $ + * $Id: sw_single.ycp 62533 2010-10-05 10:46:33Z lslezak $ * * Note: sw_single accepts a map parameter: $[ "dialog_type" : symbol, * "repo_mgmt" : boolean ] @@ -522,7 +522,19 @@ } else if (result == `online_update_configuration) { - symbol online_result = (symbol)WFM::CallFunction( "online_update_configuration", []); + string required_package = "yast2-online-update-configuration"; + + if (!PackageSystem::Installed( required_package ) && + !PackageSystem::CheckAndInstallPackages([required_package]) ) + { + Report::Error( sformat(_("Cannot configure online update repository +without having package %1 installed"), required_package)); + } + else + { + symbol cfg_result = (symbol)WFM::CallFunction( "online_update_configuration", []); + y2milestone("online_update_configuration result: %1", cfg_result); + } force_restart = true; } else if (result == `webpin) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-packager-2.19.7/src/modules/PackageSlideShow.ycp new/yast2-packager-2.20.1/src/modules/PackageSlideShow.ycp --- old/yast2-packager-2.19.7/src/modules/PackageSlideShow.ycp 2010-01-07 15:53:28.000000000 +0100 +++ new/yast2-packager-2.20.1/src/modules/PackageSlideShow.ycp 2010-09-10 14:22:55.000000000 +0200 @@ -25,7 +25,7 @@ global list<list<integer> > remaining_pkg_count_per_cd_per_src = []; // remaining number of pkgs global map<integer,integer> srcid_to_current_src_no = $[]; // the string is follwed by a media number, e.g. "Medium 1" - global string media_type = _("Medium"); + global string media_type = _("Medium %1"); global integer total_size_installed = 0; global integer total_size_to_install = 0; global integer min_time_per_cd = 10; // const - minimum time displayed per CD if there is something to install @@ -152,7 +152,7 @@ */ global void SetMediaType (string new_media_type) { - media_type = new_media_type; + y2warning("PackageSlideShow::SetMediaType() is obsoled, do not use!"); } /** @@ -303,9 +303,9 @@ if ( next_src_no >= 0 && next_cd_no >= 0 ) { - string next_media_name = sformat( "%1 %2 %3", + string next_media_name = sformat( "%1 %2", inst_src_names[ next_src_no ]:"", - media_type, next_cd_no+1 ); + sformat(media_type, next_cd_no + 1) ); if ( unit_is_seconds ) { @@ -313,7 +313,7 @@ // %1: Media type ("CD" / "DVD", ???) // %2: Media name ("SuSE Linux Professional CD 2" ) // %3: Time remaining until this media will be needed - text = sformat( _("Next %1: %2 -- %3"), media_type, next_media_name, + text = sformat( _("Next: %1 -- %2"), next_media_name, String::FormatTime( remaining_times_per_cd_per_src[ current_src_no-1, current_cd_no-1 ]: 1) ); } else @@ -321,7 +321,7 @@ // Status line informing about the next CD that will be used // %1: Media type ("CD" / "DVD", ???) // %2: Media name ("SuSE Linux Professional CD 2" ) - text = sformat( _("Next %1: %2"), media_type, next_media_name ); + text = sformat( _("Next: %1"), next_media_name ); } } @@ -863,7 +863,7 @@ if ( remaining > 0 || ( src_no+1 == current_src_no && cd_no+1 == current_cd_no ) ) // suppress current CD { - string caption = sformat( "%1 %2", media_type, cd_no+1 ); // "CD 1" - column #0 + string caption = sformat(media_type, cd_no + 1); // "Medium 1" - column #0 string rem_size = FormatRemainingSize( remaining ); // column #1 string rem_count = FormatRemainingCount( remaining_pkg_count_per_cd_per_src[ src_no, cd_no ]:0 ); string rem_time = ""; ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit yast2-online-update for openSUSE:Factory
by root＠hilbert.suse.de 05 Oct '10

05 Oct '10

Hello community, here is the log from the commit of package yast2-online-update for openSUSE:Factory checked in at Tue Oct 5 22:19:46 CEST 2010. -------- --- yast2-online-update/yast2-online-update.changes 2010-01-13 09:22:59.000000000 +0100 +++ yast2-online-update/yast2-online-update.changes 2010-10-05 12:49:10.000000000 +0200 @@ -1,0 +2,14 @@ +Tue Oct 5 10:47:00 UTC 2010 - lslezak(a)suse.cz + +- install yast2-online-update-configuration package if needed + (bnc#609778) +- 2.20.0 + +------------------------------------------------------------------- +Wed Jan 13 18:56:03 CET 2010 - kmachalkova(a)suse.cz + +- Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su + where root privileges are needed, removed X-KDE-SubstituteUID key + (bnc#540627) + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- yast2-online-update-2.19.2.tar.bz2 New: ---- yast2-online-update-2.20.0.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-online-update.spec ++++++ --- /var/tmp/diff_new_pack.hYZzWI/_old 2010-10-05 22:15:47.000000000 +0200 +++ /var/tmp/diff_new_pack.hYZzWI/_new 2010-10-05 22:15:47.000000000 +0200 @@ -1,5 +1,5 @@ # -# spec file for package yast2-online-update (Version 2.19.2) +# spec file for package yast2-online-update (Version 2.20.0) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -19,11 +19,14 @@ Name: yast2-online-update -Version: 2.19.2 +Version: 2.20.0 Release: 1 + BuildRoot: %{_tmppath}/%{name}-%{version}-build -Source0: yast2-online-update-2.19.2.tar.bz2 +Source0: yast2-online-update-2.20.0.tar.bz2 + Prefix: /usr + Group: System/YaST License: GPLv2+ BuildRequires: gcc-c++ libxcrypt-devel perl-XML-Writer pkg-config update-desktop-files yast2-bootloader yast2-devtools yast2-packager @@ -34,11 +37,13 @@ Requires: yast2 >= 2.17.40 # PackageCallbacks::FormatPatchName Requires: yast2-packager >= 2.13.159 + Provides: y2c_online_update yast2-config-online-update Obsoletes: y2c_online_update yast2-config-online-update Provides: yast2-trans-online-update y2t_online_update Obsoletes: yast2-trans-online-update y2t_online_update BuildArch: noarch + Summary: YaST2 - Online Update (YOU) %description @@ -52,14 +57,16 @@ YaST control center. %prep -%setup -n yast2-online-update-2.19.2 +%setup -n yast2-online-update-2.20.0 %build %{prefix}/bin/y2tool y2autoconf %{prefix}/bin/y2tool y2automake autoreconf --force --install + export CFLAGS="$RPM_OPT_FLAGS -DNDEBUG" export CXXFLAGS="$RPM_OPT_FLAGS -DNDEBUG" + %{?suse_update_config:%{suse_update_config -f}} ./configure --libdir=%{_libdir} --prefix=%{prefix} --mandir=%{_mandir} # V=1: verbose build in case we used AM_SILENT_RULES(yes) @@ -93,6 +100,7 @@ Summary: YaST2 - Online Update (YOU) Requires: yast2-online-update Group: System/YaST + # PatchCD desktop file moved to yast2-wagon Conflicts: yast2-wagon <= 2.17.3 ++++++ yast2-online-update-2.19.2.tar.bz2 -> yast2-online-update-2.20.0.tar.bz2 ++++++ ++++ 12390 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-online-update-2.19.2/VERSION new/yast2-online-update-2.20.0/VERSION --- old/yast2-online-update-2.19.2/VERSION 2010-01-13 09:21:26.000000000 +0100 +++ new/yast2-online-update-2.20.0/VERSION 2010-09-30 22:18:48.000000000 +0200 @@ -1 +1 @@ -2.19.2 +2.20.0 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-online-update-2.19.2/config.h.in new/yast2-online-update-2.20.0/config.h.in --- old/yast2-online-update-2.19.2/config.h.in 2010-01-13 08:39:13.000000000 +0100 +++ new/yast2-online-update-2.20.0/config.h.in 2010-10-05 12:48:20.000000000 +0200 @@ -64,6 +64,9 @@ /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME +/* Define to the home page for this package. */ +#undef PACKAGE_URL + /* Define to the version of this package. */ #undef PACKAGE_VERSION diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-online-update-2.19.2/configure.in new/yast2-online-update-2.20.0/configure.in --- old/yast2-online-update-2.19.2/configure.in 2010-01-13 08:39:04.000000000 +0100 +++ new/yast2-online-update-2.20.0/configure.in 2010-10-05 12:48:08.000000000 +0200 @@ -3,7 +3,7 @@ dnl -- This file is generated by y2autoconf 2.18.11 - DO NOT EDIT! -- dnl (edit configure.in.in instead) -AC_INIT(yast2-online-update, 2.19.1, http://bugs.opensuse.org/, yast2-online-update) +AC_INIT(yast2-online-update, 2.20.0, http://bugs.opensuse.org/, yast2-online-update) dnl Check for presence of file 'RPMNAME' AC_CONFIG_SRCDIR([RPMNAME]) @@ -18,7 +18,7 @@ AM_INIT_AUTOMAKE(tar-ustar -Wno-portability) dnl Important YaST2 variables -VERSION="2.19.1" +VERSION="2.20.0" RPMNAME="yast2-online-update" MAINTAINER="Jiri Suchomel <jsuchome(a)suse.cz>" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-online-update-2.19.2/libtool.m4 new/yast2-online-update-2.20.0/libtool.m4 --- old/yast2-online-update-2.19.2/libtool.m4 2010-01-13 08:39:09.000000000 +0100 +++ new/yast2-online-update-2.20.0/libtool.m4 2010-10-05 12:48:14.000000000 +0200 @@ -684,7 +684,6 @@ # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-online-update-2.19.2/ltversion.m4 new/yast2-online-update-2.20.0/ltversion.m4 --- old/yast2-online-update-2.19.2/ltversion.m4 2010-01-13 08:39:09.000000000 +0100 +++ new/yast2-online-update-2.20.0/ltversion.m4 2010-10-05 12:48:14.000000000 +0200 @@ -9,15 +9,15 @@ # Generated from ltversion.in. -# serial 3012 ltversion.m4 +# serial 3017 ltversion.m4 # This file is part of GNU Libtool -m4_define([LT_PACKAGE_VERSION], [2.2.6]) -m4_define([LT_PACKAGE_REVISION], [1.3012]) +m4_define([LT_PACKAGE_VERSION], [2.2.6b]) +m4_define([LT_PACKAGE_REVISION], [1.3017]) AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.2.6' -macro_revision='1.3012' +[macro_version='2.2.6b' +macro_revision='1.3017' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-online-update-2.19.2/src/online_update.desktop new/yast2-online-update-2.20.0/src/online_update.desktop --- old/yast2-online-update-2.19.2/src/online_update.desktop 2009-09-03 14:35:22.000000000 +0200 +++ new/yast2-online-update-2.20.0/src/online_update.desktop 2010-01-14 15:51:41.000000000 +0100 @@ -18,9 +18,8 @@ X-SuSE-YaST-Keywords=software,update,online Icon=yast-online_update -Exec=/sbin/yast2 online_update +Exec=xdg-su -c "/sbin/yast2 online_update" Name=Online Update GenericName=Get patches to correct and improve your existing installation -X-KDE-SubstituteUID=true StartupNotify=true diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-online-update-2.19.2/src/online_update_select.ycp new/yast2-online-update-2.20.0/src/online_update_select.ycp --- old/yast2-online-update-2.19.2/src/online_update_select.ycp 2009-12-15 15:29:36.000000000 +0100 +++ new/yast2-online-update-2.20.0/src/online_update_select.ycp 2010-10-05 12:42:21.000000000 +0200 @@ -16,6 +16,8 @@ import "Popup"; import "ProductFeatures"; import "Wizard"; + import "PackageSystem"; + import "Report"; // target and source already initialized in online_update.ycp @@ -132,7 +134,21 @@ { any result = nil; if (ret == `online_update_configuration) - result = WFM::CallFunction ("online_update_configuration", []); + { + string required_package = "yast2-online-update-configuration"; + + if (!PackageSystem::Installed( required_package ) && !PackageSystem::CheckAndInstallPackages([required_package]) ) + { + Report::Error( sformat(_("Cannot configure online update repository +without having package %1 installed"), required_package)); + } + else + { + y2milestone("starting online_update_configuration client"); + symbol cfg_result = (symbol)WFM::CallFunction( "online_update_configuration", []); + y2milestone("online_update_configuration result: %1", cfg_result); + } + } else result = WFM::CallFunction ("repositories", [`sw_single_mode]); ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit sysvinit for openSUSE:Factory
by root＠hilbert.suse.de 04 Oct '10

04 Oct '10

Hello community, here is the log from the commit of package sysvinit for openSUSE:Factory checked in at Mon Oct 4 08:36:31 CEST 2010. -------- --- sysvinit/sysvinit.changes 2010-09-24 18:48:45.000000000 +0200 +++ /mounts/work_src_done/STABLE/sysvinit/sysvinit.changes 2010-10-01 15:46:57.000000000 +0200 @@ -1,0 +2,10 @@ +Fri Oct 1 15:43:16 CEST 2010 - werner(a)suse.de + +- blogd: correct order of setting back termios and termios locks +- startpar: avoid EIO in do_forward if do_forward becomes a + background process +- Make sure that after installation of /sbin/init the init + process does re-execute that is split %post into one for + the tools sub package and one of the main package + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sysvinit.spec ++++++ --- /var/tmp/diff_new_pack.JjhDqE/_old 2010-10-04 08:36:02.000000000 +0200 +++ /var/tmp/diff_new_pack.JjhDqE/_new 2010-10-04 08:36:02.000000000 +0200 @@ -29,7 +29,7 @@ Group: System/Base AutoReqProv: on Version: 2.88 -Release: 16 +Release: 17 Summary: SysV-Style init BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: audit-devel libselinux-devel libsepol-devel pam-devel @@ -202,12 +202,14 @@ %preun tools %stop_on_removal powered -%post tools +%post if test -x /sbin/telinit -a -p /dev/initctl -a -f /proc/1/exe -a -d /proc/1/root -a ! -d /.build ; then if test $(stat -Lc '%%D-%%i' /) = $(stat -Lc '%%D-%%i' /proc/1/root) ; then /sbin/telinit u fi fi + +%post tools if test -x /sbin/mkinitrd_setup; then mkinitrd_setup fi ++++++ showconsole-1.12.dif ++++++ --- /var/tmp/diff_new_pack.JjhDqE/_old 2010-10-04 08:36:02.000000000 +0200 +++ /var/tmp/diff_new_pack.JjhDqE/_new 2010-10-04 08:36:02.000000000 +0200 @@ -1,4 +1,58 @@ ---- .dummy -+++ .dummy 2010-08-23 17:38:50.000000000 +0000 -@@ -0,0 +1 @@ -+this is a dummy, remove if real changes are required +--- blogd.c ++++ blogd.c 2010-09-30 13:12:50.172426395 +0000 +@@ -193,35 +193,16 @@ static void reconnect(int fd) + if (c->fd != fd) continue; + + switch (c->fd) { +- case 1: /* Standard out */ +- case 2: /* Standard error */ +- +- if ((newfd = open(c->tty, O_WRONLY|O_NONBLOCK|O_NOCTTY)) < 0) +- error("can not open %s: %s\n", c->tty, strerror(errno)); +- +- if (newfd != 1) +- dup2(newfd, 1); +- if (newfd != 2) +- dup2(newfd, 2); +- if (newfd > 2) +- close(newfd); +- ++ case 0: ++ case -1: /* Weired */ + break; +- +- default: /* IO of further consoles */ +- ++ default: /* IO of system consoles */ + if ((newfd = open(c->tty, O_WRONLY|O_NONBLOCK|O_NOCTTY)) < 0) + error("can not open %s: %s\n", c->tty, strerror(errno)); +- +- if (newfd != c->fd) { +- dup2(newfd, c->fd); ++ dup2(newfd, c->fd); ++ if (newfd != c->fd) + close(newfd); +- } +- +- case 0: +- case -1: /* Weired */ +- +- break; ++ break; + } + } + } +@@ -418,10 +399,11 @@ int main(int argc, char *argv[]) + err: + for (c = cons; c; c = c->next) { + if (c->fd > 0) { +- if (c->tlock > 1) /* write back lock if any */ +- (void)ioctl(c->fd, TIOCSLCKTRMIOS, &c->ltio); + if (c->tlock) /* write back old setup */ + tcsetattr(c->fd, TCSANOW, &c->otio); ++ if (c->tlock > 1) /* write back lock if any */ ++ (void)ioctl(c->fd, TIOCSLCKTRMIOS, &c->ltio); ++ c->tlock = 0; + close(c->fd); + c->fd = -1; + } ++++++ startpar-0.57.dif ++++++ --- /var/tmp/diff_new_pack.JjhDqE/_old 2010-10-04 08:36:03.000000000 +0200 +++ /var/tmp/diff_new_pack.JjhDqE/_new 2010-10-04 08:36:03.000000000 +0200 @@ -1,4 +1,215 @@ ---- .dummy -+++ .dummy 2010-08-23 17:38:50.000000000 +0000 -@@ -0,0 +1 @@ -+this is a dummy, remove if real changes are required +--- proc.c ++++ proc.c 2010-09-30 14:19:15.595926333 +0200 +@@ -94,3 +94,74 @@ int read_proc(unsigned long int * const + return 0; + } + ++struct console { ++ char * tty; ++ int tlock; ++ struct termios ltio, otio; ++ struct console *restrict next; ++}; ++static struct console *restrict consoles; ++static dev_t comparedev; ++static char* scandev(DIR *dir) ++{ ++ char *name = (char*)0; ++ struct dirent *dent; ++ int fd; ++ ++ fd = dirfd(dir); ++ rewinddir(dir); ++ while ((dent = readdir(dir))) { ++ char path[PATH_MAX]; ++ struct stat st; ++ if (fstatat(fd, dent->d_name, &st, 0) < 0) ++ continue; ++ if (!S_ISCHR(st.st_mode)) ++ continue; ++ if (comparedev != st.st_rdev) ++ continue; ++ if ((size_t)snprintf(path, sizeof(path), "/dev/%s", dent->d_name) >= sizeof(path)) ++ continue; ++ name = realpath(path, NULL); ++ break; ++ } ++ return name; ++} ++ ++void detect_consoles(void) ++{ ++ FILE *fc; ++ if ((fc = fopen("/proc/tty/consoles", "r"))) { ++ char fbuf[16]; ++ int maj, min; ++ DIR *dir; ++ dir = opendir("/dev"); ++ if (!dir) ++ goto out; ++ while ((fscanf(fc, "%*s %*s (%[^)]) %d:%d", &fbuf[0], &maj, &min) == 3)) { ++ struct console *restrict tail; ++ char * name; ++ ++ if (!strchr(fbuf, 'E')) ++ continue; ++ comparedev = makedev(maj, min); ++ name = scandev(dir); ++ ++ if (!name) ++ continue; ++ ++ if (posix_memalign((void*)&tail, sizeof(void*), alignof(typeof(struct console))) != 0) ++ perror("memory allocation"); ++ ++ tail->next = (struct console*)0; ++ tail->tty = name; ++ ++ if (!consoles) ++ consoles = tail; ++ else ++ consoles->next = tail; ++ } ++ closedir(dir); ++ out: ++ fclose(fc); ++ } ++} +--- proc.h ++++ proc.h 2010-09-30 14:41:35.271926120 +0200 +@@ -19,5 +19,3 @@ + + extern int read_proc(unsigned long int *prcs_run, unsigned long int *prcs_blked); + extern void detect_consoles(void); +-extern void unraw_consoles(void); +-extern void raw_consoles(void); +--- startpar.c ++++ startpar.c 2010-09-30 15:01:50.787926081 +0200 +@@ -241,14 +241,7 @@ void callsplash(int n, const char *path, + return; + } + +- (void)sigemptyset(&nmask); +- (void)sigaddset(&nmask, SIGINT); +- (void)sigaddset(&nmask, SIGHUP); +- (void)sigaddset(&nmask, SIGQUIT); +- (void)sigaddset(&nmask, SIGSEGV); +- (void)sigaddset(&nmask, SIGTERM); +- (void)sigaddset(&nmask, SIGCHLD); +- (void)sigaddset(&nmask, SIGTTIN); ++ (void)sigfillset(&nmask); + sigprocmask(SIG_UNBLOCK, &nmask, NULL); + + (void)signal(SIGINT, SIG_DFL); +@@ -258,6 +251,7 @@ void callsplash(int n, const char *path, + (void)signal(SIGTERM, SIG_DFL); + (void)signal(SIGCHLD, SIG_DFL); + (void)signal(SIGTTIN, SIG_DFL); ++ (void)signal(SIGTTOU, SIG_DFL); + + TEMP_FAILURE_RETRY(dup2(2, 1)); + closeall(); +@@ -456,14 +450,7 @@ void run(struct prg *p) + return; + } + +- (void)sigemptyset(&nmask); +- (void)sigaddset(&nmask, SIGINT); +- (void)sigaddset(&nmask, SIGHUP); +- (void)sigaddset(&nmask, SIGQUIT); +- (void)sigaddset(&nmask, SIGSEGV); +- (void)sigaddset(&nmask, SIGTERM); +- (void)sigaddset(&nmask, SIGCHLD); +- (void)sigaddset(&nmask, SIGTTIN); ++ (void)sigfillset(&nmask); + sigprocmask(SIG_UNBLOCK, &nmask, NULL); + + (void)signal(SIGINT, SIG_DFL); +@@ -473,6 +460,7 @@ void run(struct prg *p) + (void)signal(SIGTERM, SIG_DFL); + (void)signal(SIGCHLD, SIG_DFL); + (void)signal(SIGTTIN, SIG_DFL); ++ (void)signal(SIGTTOU, SIG_DFL); + + if (setpgid(0, 0)) + perror("setpgid"); +@@ -582,14 +570,7 @@ int run_single(const char *prg, const ch + { + sigset_t nmask; + +- (void)sigemptyset(&nmask); +- (void)sigaddset(&nmask, SIGINT); +- (void)sigaddset(&nmask, SIGHUP); +- (void)sigaddset(&nmask, SIGQUIT); +- (void)sigaddset(&nmask, SIGSEGV); +- (void)sigaddset(&nmask, SIGTERM); +- (void)sigaddset(&nmask, SIGCHLD); +- (void)sigaddset(&nmask, SIGTTIN); ++ (void)sigfillset(&nmask); + sigprocmask(SIG_UNBLOCK, &nmask, NULL); + + (void)signal(SIGINT, SIG_DFL); +@@ -599,6 +580,7 @@ int run_single(const char *prg, const ch + (void)signal(SIGTERM, SIG_DFL); + (void)signal(SIGCHLD, SIG_DFL); + (void)signal(SIGTTIN, SIG_DFL); ++ (void)signal(SIGTTOU, SIG_DFL); + + TEMP_FAILURE_RETRY(dup2(2, 1)); + closeall(); +@@ -632,19 +614,20 @@ void do_forward(void) + { + if (errno == EINTR) + continue; ++#if defined(DEBUG) && (DEBUG > 0) + perror("\n\rstartpar: forward read"); ++#endif + break; + } + b = buf; + while (r > 0) + { + rr = write(1, b, r); +- if (rr == -1) ++ if (rr < 0) + { + if (errno == EINTR) + continue; + perror("\n\rstartpar: forward write"); +- break; + rr = r; + } + r -= rr; +@@ -730,9 +713,23 @@ void detach(struct prg *p, const int sto + { + if ((pid = fork()) == 0) + { ++ sigset_t nmask; ++ (void)sigfillset(&nmask); ++ sigprocmask(SIG_UNBLOCK, &nmask, NULL); ++ ++ (void)signal(SIGINT, SIG_DFL); ++ (void)signal(SIGHUP, SIG_DFL); ++ (void)signal(SIGQUIT, SIG_DFL); ++ (void)signal(SIGSEGV, SIG_DFL); ++ (void)signal(SIGTERM, SIG_DFL); ++ (void)signal(SIGCHLD, SIG_DFL); ++ (void)signal(SIGTTIN, SIG_DFL); ++ (void)signal(SIGTTOU, SIG_DFL); ++ + TEMP_FAILURE_RETRY(dup2(p->fd, 0)); + TEMP_FAILURE_RETRY(dup2(2, 1)); + closeall(); ++ + execlp(myname, myname, "-f", "--", p->name, NULL); + do_forward(); + } +@@ -833,6 +830,8 @@ int main(int argc, char **argv) + char *splashopt = 0; + sigset_t nmask, omask, smask; + ++ detect_consoles(); ++ + (void)sigemptyset(&nmask); + (void)sigaddset(&nmask, SIGHUP); + sigprocmask(SIG_UNBLOCK, &nmask, NULL); ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit pidgin-embeddedvideo for openSUSE:Factory
by root＠hilbert.suse.de 04 Oct '10

04 Oct '10

Hello community, here is the log from the commit of package pidgin-embeddedvideo for openSUSE:Factory checked in at Mon Oct 4 08:35:52 CEST 2010. -------- New Changes file: --- /dev/null 2010-07-09 01:59:37.000000000 +0200 +++ /mounts/work_src_done/STABLE/pidgin-embeddedvideo/pidgin-embeddedvideo.changes 2010-09-21 23:18:23.000000000 +0200 @@ -0,0 +1,15 @@ +------------------------------------------------------------------- +Tue Sep 21 21:03:27 UTC 2010 - badshah400(a)gmail.com + +- Created subpackage pidgin-plugin-embeddedvideo which contains all + required files +- Spec file cleanup + + Remove libglib Buildrequires, as it is not required + + Corrected license tag to GPLv2+ instead of GPLv2 + + Included the AUTHORS file from source in the %doc section + +------------------------------------------------------------------- +Tue Sep 7 14:44:55 UTC 2010 - badshah400(a)gmail.com + +- Initial package (version 1.1.2) + calling whatdependson for head-i586 New: ---- pidgin-embeddedvideo-1.1-2.tar.bz2 pidgin-embeddedvideo.changes pidgin-embeddedvideo.spec ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ pidgin-embeddedvideo.spec ++++++ # # spec file for package pidgin-embeddedvideo (Version 1.1) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # %define _version 1.1-2 Name: pidgin-embeddedvideo Version: 1.1 Release: 1 License: GPLv2+ Summary: Pidgin plugin to watch videos directly into your Pidgin conversation Url: http://code.google.com/p/pidgin-embeddedvideo/ Group: Productivity/Networking/Instant Messenger Source: %{name}-%{_version}.tar.bz2 BuildRequires: libcurl-devel BuildRequires: libwebkit-devel BuildRequires: pidgin-devel BuildRoot: %{_tmppath}/%{name}-%{version}-build %description Pidgin Embedded Video is a GTK plugin for the popular instant messaging client Pidgin. The purpose of this plugin is to provide a faster way to watch videos while chatting with your friends. No more additional browser windows! It transforms a simple conversation into a much more attractive and interesting experience. %package -n pidgin-plugin-embeddedvideo License: GPLv2+ Summary: Pidgin plugin to watch videos directly into your Pidgin conversation Group: Productivity/Networking/Instant Messenger Requires: pidgin Recommends: pullin-flash-player Provides: %{name} = %{version} %description -n pidgin-plugin-embeddedvideo Pidgin Embedded Video is a GTK plugin for the popular instant messaging client Pidgin. The purpose of this plugin is to provide a faster way to watch videos while chatting with your friends. No more additional browser windows! It transforms a simple conversation into a much more attractive and interesting experience. %prep %setup -q -n %{name} %build %configure make %install %makeinstall %clean rm -rf %{buildroot} %files -n pidgin-plugin-embeddedvideo %defattr(-,root,root) %doc AUTHORS ChangeLog COPYING README %{_libdir}/pidgin/embeddedvideo.so %changelog ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit lxdm for openSUSE:Factory
by root＠hilbert.suse.de 04 Oct '10

04 Oct '10

Hello community, here is the log from the commit of package lxdm for openSUSE:Factory checked in at Mon Oct 4 08:34:50 CEST 2010. -------- --- lxdm/lxdm.changes 2010-08-23 17:11:19.000000000 +0200 +++ /mounts/work_src_done/STABLE/lxdm/lxdm.changes 2010-09-30 13:01:18.000000000 +0200 @@ -1,0 +2,9 @@ +Thu Sep 30 11:00:15 UTC 2010 - andrea(a)opensuse.org + +- New upstream version 0.3.0 + * Translations improvments + * fixed bugs in auth view + * fix a language list issue + * UI improvments (with user lists available) + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- lxdm-0.2.97-fix-bnc630862.patch lxdm-0.2.97_git20100730.tar.bz2 New: ---- lxdm-0.3.0.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ lxdm.spec ++++++ --- /var/tmp/diff_new_pack.EWIfpP/_old 2010-10-04 08:34:41.000000000 +0200 +++ /var/tmp/diff_new_pack.EWIfpP/_new 2010-10-04 08:34:41.000000000 +0200 @@ -1,5 +1,5 @@ # -# spec file for package lxdm (Version 0.2.97_git20100730) +# spec file for package lxdm (Version 0.3.0) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -20,7 +20,7 @@ Name: lxdm Summary: LXDE Display Manager -Version: 0.2.97_git20100730 +Version: 0.3.0 Release: 1 License: GPLv2 and LGPLv2 Group: System/GUI/LXDE @@ -36,11 +36,8 @@ # PATCH-FIX-OPENSUSE lxdm-0.2.0-common.patch werner(a)novell.com # this patch fix bnc#586555 lxdm now use common scripts in /etc/X11/xdm Patch4: %{name}-0.2.0-common.patch -# PATCH-FIX-UPSTREAM lxdm-0.2.97-fix-bnc630862.patch andrea(a)opensuse.org -# this patch fix bnc#630862 lxdm now allow space in passwords -Patch5: %name-0.2.97-fix-bnc630862.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build -BuildRequires: autoconf automake gcc gcc-c++ gettext-tools make +BuildRequires: autoconf automake gcc gettext-tools make BuildRequires: ConsoleKit-devel gettext-runtime gtk2-devel intltool BuildRequires: fdupes iso-codes-devel pam-devel pkg-config Requires: desktop-data-openSUSE @@ -53,17 +50,15 @@ KDM in LXDE distros. %prep -%setup -q -n %name +%setup -q %patch0 -p1 %patch1 -p1 %patch2 -p1 %patch4 -p1 -%patch5 -p1 %__cp %{SOURCE1} . %build -./autogen.sh %configure %__make %{?jobs:-j%{jobs}} ++++++ lxdm-0.2.97_git20100730.tar.bz2 -> lxdm-0.3.0.tar.bz2 ++++++ ++++ 27224 lines of diff (skipped) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0

commit arpwatch-ethercodes for openSUSE:Factory
by root＠hilbert.suse.de 04 Oct '10

04 Oct '10

Hello community, here is the log from the commit of package arpwatch-ethercodes for openSUSE:Factory checked in at Mon Oct 4 08:33:23 CEST 2010. -------- --- AUTO/all/arpwatch-ethercodes/arpwatch-ethercodes.changes 2010-10-03 06:40:08.000000000 +0200 +++ /mounts/work_src_done/STABLE/arpwatch-ethercodes/arpwatch-ethercodes.changes 2010-10-04 06:40:08.000000000 +0200 @@ -2 +2 @@ -Sun Oct 3 06:40:08 CEST 2010 - autobuild(a)suse.de +Mon Oct 4 06:40:08 CEST 2010 - autobuild(a)suse.de @@ -4 +4 @@ -- automated update on 2010-10-03 +- automated update on 2010-10-04 calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ arpwatch-ethercodes.spec ++++++ --- /var/tmp/diff_new_pack.zUGlV7/_old 2010-10-04 08:33:20.000000000 +0200 +++ /var/tmp/diff_new_pack.zUGlV7/_new 2010-10-04 08:33:20.000000000 +0200 @@ -26,7 +26,7 @@ AutoReqProv: on Summary: Ethercodes Data for arpwatch Version: 2010.10.3 -Release: 1 +Release: 2 Source: http://standards.ieee.org/regauth/oui/oui.txt.bz2 BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildArch: noarch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-commit+help(a)opensuse.org

1 0