https://bugzilla.novell.com/show_bug.cgi?id=819214 https://bugzilla.novell.com/show_bug.cgi?id=819214#c0 Summary: Will Not Install On an IBM eserver xSeries 336 with software RAID1 Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: Other OS/Version: openSUSE 12.3 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: clkennedy@netpipe.com QAContact: jsrain@suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:20.0) Gecko/20100101 Firefox/20.0 Computer: IBM eserver xSeries 336 - 883755U Processor: 4x Intel Xeon 3.6 GHz Memory: 1Mb RAM BIOS Version: 1.12 Build: APE130AUS Disk Controller: Intel 82801EB SATA Controller Disks: /dev/sda1 4GB swap /dev/sda2 49Gb linux raid /dev/sdb1 4GB swap /dev/sdb2 49Gb linux raid RAID1: /dev/md0 formatted as ext4 to be mounted as root. /dev/sda2 /dev/sdb2 12.3 Install hangs with both 32 & 64 bit versions. 12.1 installs without incident using the same partitioning and RAID configuration. Error Message: Perl-Boot Loader ... MBRTools::examineMBR.195: Error Examine MBR cannot read 512 bytes form /dev/md Reproducible: Always Steps to Reproduce: 1.Boot Install Disk 2.Partition Disk as described above 3.Start Install 4.It doesn't get very far. Actual Results: Error Message: Perl-Boot Loader ... MBRTools::examineMBR.195: Error Examine MBR cannot read 512 bytes form /dev/md Expected Results: Proper Install -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.