[Bug 546561] New: AVM Fritz!WLAN USB N not supported
http://bugzilla.novell.com/show_bug.cgi?id=546561 Summary: AVM Fritz!WLAN USB N not supported Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 8 Platform: x86 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: schaefer.frank@gmx.net QAContact: jsrain@novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-3.1 Firefox/3.5.3 The USB-WLAN-devices AVM Fritz!WLAN USB N (057c:8401) AVM Fritz!WLAN USB N 2.4 (057c:8402) are supported by the ar9170-driver included in the kernel since 2.6.31. openSUSE 11.2 M8 lacks support for these devices: 1.) firmware missing: 1-stage-firmware-file ar9170.fw is needed. It has been released under GPLv2. See http://linuxwireless.org/en/users/Drivers/ar9170.fw 2.) YaST doesn't detect / show the device and configuration is not possible These devices are the most popular/widespread WLAN-sticks here in Germany. Therefore support by openSUSE 11.2 is very desirable. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User aj@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c1 Andreas Jaeger <aj@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team-screening@forge.pr |vbotka@novell.com |ovo.novell.com | --- Comment #1 from Andreas Jaeger <aj@novell.com> 2009-10-14 03:21:56 MDT --- Vlatko, could you add the firmware, please? Ad 2: Those should work with NetworkManager. Frank, do they after adding the firmware? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c2 --- Comment #2 from Frank Schäfer <schaefer.frank@gmx.net> 2009-10-15 05:38:05 MDT --- Yes, the firmware is loaded successfully and the device shows up in knetworkmanager. I couldn't test connecting to networks yet, will do that as soon as possible. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User vbotka@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c3 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |schaefer.frank@gmx.net --- Comment #3 from Vladimir Botka <vbotka@novell.com> 2009-10-15 06:21:14 MDT --- I have updated the Package ar9170-firmware (Project driver:wireless) . Could you test the package as I do not have this HW ? I will request the submit to the Factory then. I have also submitted the request to update the Kernel:HEAD kernel-firmware where all the firmware shall be placed now. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c4 Frank Schäfer <schaefer.frank@gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|schaefer.frank@gmx.net | --- Comment #4 from Frank Schäfer <schaefer.frank@gmx.net> 2009-10-15 09:32:26 MDT --- Ok, tested successfully on my big machine a few minutes ago: openSUSE 11.1 + vanilla-kernel-2.6.31.4 + self-compiled firmware from git-repo. I created a /etc/sysconfig/network/ifcfg-wlan1 manually and could successfully establish a fast and (for the 10 minutes I tested) stable connection using ifup. So driver+firmware are working ! Concerning 11.2: I updated my M8-test-machine with todays packages to kernel 2.6.31.3 and installed the firmware-package. Just noticed: Additional rpm output: Reloading module ar9170 FATAL: Module ar9170 not found. FATAL: Module ar9170 not found. => The module is called ar9170usb. After the reboot, dmesg tells me: [ 198.575684] usb 1-8: new high speed USB device using ehci_hcd and address 6 [ 198.727701] usb 1-8: New USB device found, idVendor=057c, idProduct=8401 [ 198.727716] usb 1-8: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 198.727730] usb 1-8: Product: FRITZ!WLAN USB Stick N [ 198.727765] usb 1-8: Manufacturer: AVM Berlin [ 198.727783] usb 1-8: SerialNumber: 001F3F048161 [ 198.728021] usb 1-8: configuration #1 chosen from 1 choice [ 198.976686] usb 1-8: reset high speed USB device using ehci_hcd and address 6 [ 200.117682] usb 1-8: firmware: requesting ar9170.fw [ 201.202680] usb 1-8: USB setup failed (-110). [ 201.210172] ar9170usb: probe of 1-8:1.0 failed with error -110 [ 201.210691] usbcore: registered new interface driver ar9170usb => The firmware-file is found but not loaded successfully. Should look like this: .. usb 2-8: firmware: requesting ar9170.fw ath: EEPROM regdomain: 0x8114 ath: EEPROM indicates we should expect a country code ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x37 ath: Country alpha2 being used: DE ath: Regpair used: 0x37 phy1: Selected rate control algorithm 'minstrel' cfg80211: Calling CRDA for country: DE Registered led device: ar9170-phy1::tx Registered led device: ar9170-phy1::assoc usb 2-8: Atheros AR9170 is registered as 'phy1' usbcore: registered new interface driver ar9170usb Vladimir, where did you get the ar9170.fw-file from ? Self-compiled from git-repo ? I just noticed that its size is ~7.1kb while mine (on 11.1) is ~14.3kb... -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User vbotka@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c5 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO CC| |mmarek@novell.com Info Provider| |mmarek@novell.com --- Comment #5 from Vladimir Botka <vbotka@novell.com> 2009-10-15 11:38:25 MDT --- I have added the maintainer of the kernel-firmware mmarek to clarify how to add this firmware to the kernel-firmware package.
@subject: submit-request #22443 state changed: new -> declined State of submit-request #22443 was changed by michal-m: new -> declined Comment: Please don't modify the upstream tarball, add the firmware as another source file instead.
This is clear.
Also the ar9170.fw file you added is some html page instead of the firmware.
I do not understand what you mean here. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mmarek@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c6 Michal Marek <mmarek@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|mmarek@novell.com | --- Comment #6 from Michal Marek <mmarek@novell.com> 2009-10-16 01:51:16 MDT --- (already clarified) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c7 --- Comment #7 from Frank Schäfer <schaefer.frank@gmx.net> 2009-10-16 08:24:13 MDT --- Latest firmware-package-version ar9170-firmware-1.1-3.1 works fine (still uses the wrong module-name in %post-script). -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User vbotka@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c8 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |schaefer.frank@gmx.net --- Comment #8 from Vladimir Botka <vbotka@novell.com> 2009-10-20 06:01:30 MDT --- (In reply to comment #7)
Latest firmware-package-version ar9170-firmware-1.1-3.1 works fine (still uses the wrong module-name in %post-script).
Could you be more specific in "the wrong module-name in %post-script". What is wrong ? Package ar9170-open-firmware (Project driver:wireless) is scheduled. If it works I will submit it to the Factory. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c9 Frank Schäfer <schaefer.frank@gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|schaefer.frank@gmx.net | --- Comment #9 from Frank Schäfer <schaefer.frank@gmx.net> 2009-10-20 06:52:37 MDT --- As I said, the module is called ar9170usb. %post-script modprobes for ar9170 which causes the mentioned errors: FATAL: Module ar9170 not found. BTW, package-description uses the wrong name, too. Concerning ifup/ifdown-configuration with YaST: the device needs to be added to the hwinfo-database, right ? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User vbotka@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c10 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO CC| |mt@novell.com Info Provider| |mt@novell.com --- Comment #10 from Vladimir Botka <vbotka@novell.com> 2009-10-20 08:21:50 MDT --- (In reply to comment #9)
As I said, the module is called ar9170usb. %post-script modprobes for ar9170 which causes the mentioned errors: FATAL: Module ar9170 not found. BTW, package-description uses the wrong name, too.
Thank you. Both driver:wireless/ar9170-open-firmware and ar9170-firmware are updated. If it is ok now I will submit them to the Factory.
Concerning ifup/ifdown-configuration with YaST: the device needs to be added to the hwinfo-database, right ?
Let us ask the sysconfig maintainer. Marius, these USB-WLAN-devices [1] are using ar9170usb. Is any hwinfo-database update needed ? [1] AVM Fritz!WLAN USB N (057c:8401) AVM Fritz!WLAN USB N 2.4 (057c:8402) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c11 Frank Schäfer <schaefer.frank@gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|mt@novell.com | --- Comment #11 from Frank Schäfer <schaefer.frank@gmx.net> 2009-10-21 05:01:27 MDT ---
Thank you. Both driver:wireless/ar9170-open-firmware and ar9170-firmware are updated. If it is ok now I will submit them to the Factory.
Works perfect now.
Let us ask the sysconfig maintainer. Marius, these USB-WLAN-devices [1] are using ar9170usb. Is any hwinfo-database update needed ?
Marius, could you please check the other devices covered by the ar9170-driver (see http://linuxwireless.org/en/users/Drivers/ar9170), too ? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium Status|NEW |NEEDINFO Info Provider| |mt@novell.com -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mt@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c12 Marius Tomaschewski <mt@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|mt@novell.com | --- Comment #12 from Marius Tomaschewski <mt@novell.com> 2009-11-04 04:01:28 MST --- (In reply to comment #10)
(In reply to comment #9)
As I said, the module is called ar9170usb. %post-script modprobes for ar9170 which causes the mentioned errors: FATAL: Module ar9170 not found. BTW, package-description uses the wrong name, too.
Thank you. Both driver:wireless/ar9170-open-firmware and ar9170-firmware are updated. If it is ok now I will submit them to the Factory.
Concerning ifup/ifdown-configuration with YaST: the device needs to be added to the hwinfo-database, right ?
Let us ask the sysconfig maintainer. Marius, these USB-WLAN-devices [1] are using ar9170usb. Is any hwinfo-database update needed ?
[1] AVM Fritz!WLAN USB N (057c:8401) AVM Fritz!WLAN USB N 2.4 (057c:8402)
All what sysconfig is using is the WIRELESS_WPA_DRIVER allowing to specify the wpa_supplicant driver and a static mapping in ifup-wireless when unset: test -n "$WIRELESS_WPA_DRIVER" && \ WPA_DRIVER="$WIRELESS_WPA_DRIVER" || \ case "${DRIVER}" in prism54) WPA_DRIVER=prism54 PREFER_WPA_SUPPLICANT=no ;; rt61|rt73) WPA_DRIVER=ralink ;; ipw2200|ipw2100|ipw3945|hostap_*) WPA_DRIVER=wext ;; ndiswrapper|*.sys) WPA_DRIVER=wext ;; rt2500usb|rt2500pci) WPA_DRIVER=wext ;; rt61pci|rt73usb|rt2400pci) WPA_DRIVER=wext ;; iwlagn|iwl3945|iwl4965) WPA_DRIVER=wext ;; zd1211rw) WPA_DRIVER=wext ;; ath5k|ath9k|ath_pci) WPA_DRIVER=wext ;; b43|b43legacy|ssb) WPA_DRIVER=wext ;; p54pci|p54usb) WPA_DRIVER=wext ;; at76*) WPA_DRIVER=wext ;; *) WPA_DRIVER=unsupported PREFER_WPA_SUPPLICANT=no ;; esac if need_wpa_supplicant ; then info_mesg "configuration requires wpa_supplicant" if [ "$WPA_DRIVER" = "unsupported" ]; then message "`printf " %-9s warning: WPA configured but may be unsupported" $INTERFACE`" message "`printf " %-9s warning: by this device" $INTERFACE`" info_mesg "using WPA driver 'wext' for interface $INTERFACE" WPA_DRIVER=wext fi start_wpa_supplicant elif [ "$PREFER_WPA_SUPPLICANT" = "yes" ]; then if applicable_wpa_supplicant ; then start_wpa_supplicant else info_mesg "setting up $INTERFACE w/o wpa_supplicant" old_setup fi else old_setup fi -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mt@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c13 --- Comment #13 from Marius Tomaschewski <mt@novell.com> 2009-11-04 04:07:08 MST --- Vladimir, should I add this mapping to ifup-wireless? ar9170*) WPA_DRIVER=wext ;; or is here another wpa_supplicant driver required? Sysconfig does not load any hardware modules. This is done automatically by the kernel or by udev rules. These rules are either static as this one: /etc/udev/rules.d/77-network.rules: # Driver module ipw3945 requires an userspace daemon to register network # interfaces. SUBSYSTEM=="drivers", ACTION=="add", DEVPATH=="/bus/pci/drivers/ipw3945", RUN+="ipw3945d.sh" or added by e.g. yast2 to /etc/udev/rules.d/79-yast2-drivers.rules. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mt@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c14 Marius Tomaschewski <mt@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |mzugec@novell.com --- Comment #14 from Marius Tomaschewski <mt@novell.com> 2009-11-04 04:10:23 MST --- Michal, I guess, YaST2 needs the hwinfo entries to consider it correctly, right? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mt@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c15 --- Comment #15 from Marius Tomaschewski <mt@novell.com> 2009-11-04 04:12:16 MST --- (In reply to comment #12)
test -n "$WIRELESS_WPA_DRIVER" && \ WPA_DRIVER="$WIRELESS_WPA_DRIVER" || \ case "${DRIVER}" in
^^^^^^^^^ BTW: The hardware driver name is from here: DRIVER="`( cd -P /sys/class/net/$INTERFACE/device/driver; echo ${PWD##*/}; )`" -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mzugec@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c16 Michal Zugec <mzugec@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |mzugec@novell.com Info Provider|mzugec@novell.com |schaefer.frank@gmx.net --- Comment #16 from Michal Zugec <mzugec@novell.com> 2009-11-04 04:46:25 MST --- Please provide also "hwinfo --netcard" output -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c17 Frank Schäfer <schaefer.frank@gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|schaefer.frank@gmx.net | --- Comment #17 from Frank Schäfer <schaefer.frank@gmx.net> 2009-11-04 07:55:33 MST --- Created an attachment (id=325521) --> (http://bugzilla.novell.com/attachment.cgi?id=325521) Output of hwinfo --netcards -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c18 --- Comment #18 from Frank Schäfer <schaefer.frank@gmx.net> 2009-11-04 08:07:54 MST --- There's an additional issue: The 2 AVM-devices start up as Windows-driver-CDROM-devices (057c:84ff) and are therefore not available from the beginning. The firmware needs about 2 minutes to time-out. Then they vanish, change their product-IDs to either 8401 or 8402 and re-appear as WLAN-devices. I've sent a patch to kernel-ML to add a mode-switch to the ar9170usb-driver, but at least for openSUSE 11.2 / kernel 2.6.31, we need udev-rule to auto-eject the storage-device immediately. Simple "eject" command works (although I'm getting an error-message). -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User vbotka@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c19 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED --- Comment #19 from Vladimir Botka <vbotka@novell.com> 2009-11-05 02:53:36 MST --- (In reply to comment #13)
Vladimir, should I add this mapping to ifup-wireless?
ar9170*) WPA_DRIVER=wext ;; or is here another wpa_supplicant driver required?
I do not have the HW. Frank, does wext work for you ? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |schaefer.frank@gmx.net -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c20 --- Comment #20 from Frank Schäfer <schaefer.frank@gmx.net> 2009-11-05 03:59:46 MST --- Ahm, sorry, I'm not familar with theses scripts. Which script/file do I have to edit ? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 Frank Schäfer <schaefer.frank@gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Info Provider|schaefer.frank@gmx.net |vbotka@novell.com -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mt@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c21 Marius Tomaschewski <mt@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Info Provider|vbotka@novell.com |schaefer.frank@gmx.net --- Comment #21 from Marius Tomaschewski <mt@novell.com> 2009-11-05 04:26:35 MST --- Which driver (option -D) do are you using for wpa_supplicant (-Dwext)? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User schaefer.frank@gmx.net added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c22 Frank Schäfer <schaefer.frank@gmx.net> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|schaefer.frank@gmx.net | --- Comment #22 from Frank Schäfer <schaefer.frank@gmx.net> 2009-11-05 05:25:47 MST --- It's wext. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mt@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c23 --- Comment #23 from Marius Tomaschewski <mt@novell.com> 2009-11-05 06:30:34 MST --- Created an attachment (id=325755) --> (http://bugzilla.novell.com/attachment.cgi?id=325755) Patch for sysconfig / ifup-wireless marking it as supported by the wext driver [basically it avoids "WPA configured but may be unsupported" warnings]. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mt@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c24 Marius Tomaschewski <mt@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO CC| |coolo@novell.com Info Provider| |vbotka@novell.com --- Comment #24 from Marius Tomaschewski <mt@novell.com> 2009-11-05 06:38:26 MST --- Applied above patch -- will be submitted to Base:System/sysconfig in OBS as soon (Gateway Time-Out at the moment...). Vladimir, are the changes for the firmware loading submitted to openSUSE:11.2? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User vbotka@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c25 Vladimir Botka <vbotka@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|vbotka@novell.com | --- Comment #25 from Vladimir Botka <vbotka@novell.com> 2009-11-05 10:28:29 MST --- Noop, the package is prepared [3]. But the ucode is build with a specific version of gcc [4]. The reasoning in detail is here [1]. To build a SH-2 toolchain package is an option. In RC2 I can see only the ucode coming from kernel-firmware [2]. [1] https://bugzilla.novell.com/show_bug.cgi?id=550441#c1 [2] # ll /lib/firmware/ | grep ar9170 -rw-r--r-- 1 root root 83968 2009-08-21 10:46 ar9170-1.fw -rw-r--r-- 1 root root 3508 2009-08-21 10:46 ar9170-2.fw [3] # osc ls driver:wireless ar9170-open-firmware ar9170-open-firmware.changes ar9170-open-firmware.spec ar9170.fw [4] ar9170-fw/README "To build the firmware you will need an SH-2 toolchain" -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=546561 User mt@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546561#c26 --- Comment #26 from Marius Tomaschewski <mt@novell.com> 2009-11-06 14:32:51 MST --- (In reply to comment #25)
[3] # osc ls driver:wireless ar9170-open-firmware
OK, thanks, it IMO makes no sense to request submission of the sysconfig patch to 11.2; it will stay in Base:System/sysconfig, except I'll get an explicit go from somewhere (Coolo). It is just about to skip the "may be unsupported" warning. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=546561 https://bugzilla.novell.com/show_bug.cgi?id=546561#c27 Uwe Drechsel <uwedr@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |CLOSED Resolution| |WONTFIX --- Comment #27 from Uwe Drechsel <uwedr@suse.com> 2011-08-26 12:54:13 CEST --- The lifecycle of openSUSE 11.2 ended on May 12th 2011. I'm closing this bug to make it easier to focus on upcoming releases. Thank you for reporting this issue and we are sorry that we have not be able to fix it before this version reached its end of life. If you would still like to see this bug fixed and are able to reproduce it against a maintained version, please reopen this bug and change the 'version' of this bug to the applicable version. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=546561 https://bugzilla.novell.com/show_bug.cgi?id=546561#c28 --- Comment #28 from Uwe Drechsel <uwedr@suse.com> 2011-08-26 12:58:09 CEST --- The lifecycle of openSUSE 11.2 ended on May 12th 2011. I'm closing this bug to make it easier to focus on upcoming releases. Thank you for reporting this issue and we are sorry that we have not be able to fix it before this version reached its end of life. If you would still like to see this bug fixed and are able to reproduce it against a maintained version, please reopen this bug and change the 'version' of this bug to the applicable version. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com