[Bug 444492] New: Boot delay, waiting for partition to appear.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c1 Summary: Boot delay, waiting for partition to appear. Product: openSUSE 11.1 Version: Factory Platform: 64bit OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: monkey9@iae.nl QAContact: qa@suse.de Found By: Beta-Customer Boot log for inspection. Inspecting /boot/System.map-2.6.27.5-1-default Cannot find map file. No module symbols loaded - kernel modules not enabled. Cannot build symbol table - disabling symbol lookups klogd 1.4.1, log source = ksyslog started. <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 2.6.27.5-1-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-08 04:59:08 +0100 <6>Command line: root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part11 resume=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 splash=silent vga=0x355 <4>KERNEL supported cpus: <4> Intel GenuineIntel <4> AMD AuthenticAMD <4> Centaur CentaurHauls <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) <6> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) <6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <6> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) <6> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) <6> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) <6> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) <6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) <6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) <6>last_pfn = 0x7fee0 max_arch_pfn = 0x3ffffffff <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <6>init_memory_mapping <7> 0000000000 - 007fe00000 page 2M <7> 007fe00000 - 007fee0000 page 4k <7>kernel direct mapping tables up to 7fee0000 @ 8000-c000 <6>last_map_addr: 7fee0000 end: 7fee0000 <6>RAMDISK: 37a12000 - 37fef121 <6>DMI 2.4 present. <4>ACPI: RSDP 000F7A30, 0014 (r0 Nvidia) <4>ACPI: RSDT 7FEE3040, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) <4>ACPI: FACP 7FEE30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) <4>ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609] <4>ACPI: DSDT 7FEE3180, 6395 (r1 NVIDIA NVDAACPI 1000 MSFT 100000E) <4>ACPI: FACS 7FEE0000, 0040 <4>ACPI: SSDT 7FEE9640, 01C4 (r1 PTLTD POWERNOW 1 LTP 1) <4>ACPI: _HPT 7FEE9880, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) <4>ACPI: MCFG 7FEE9900, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) <4>ACPI: APIC 7FEE9580, 007C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) <6>Scanning NUMA topology in Northbridge 24 <6>No NUMA configuration found <6>Faking a node at 0000000000000000-000000007fee0000 <6>Bootmem setup node 0 0000000000000000-000000007fee0000 <6> NODE_DATA [000000000000a000 - 000000000003dfff] <6> bootmap [000000000003e000 - 000000000004dfdf] pages 10 <6>(6 early reservations) ==> bootmem [0000000000 - 007fee0000] <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] <6> #2 [0000200000 - 0001559e78] TEXT DATA BSS ==> [0000200000 - 0001559e78] <6> #3 [0037a12000 - 0037fef121] RAMDISK ==> [0037a12000 - 0037fef121] <6> #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] <6> #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] <6>found SMP MP-table at [ffff8800000f3a00] 000f3a00 <7> [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001800000-ffff8800037fffff] on node 0 <4>Zone PFN ranges: <4> DMA 0x00000000 -> 0x00001000 <4> DMA32 0x00001000 -> 0x00100000 <4> Normal 0x00100000 -> 0x00100000 <4>Movable zone start PFN for each node <4>early_node_map[2] active PFN ranges <4> 0: 0x00000000 -> 0x0000009f <4> 0: 0x00000100 -> 0x0007fee0 <7>On node 0 totalpages: 523903 <7> DMA zone: 3831 pages, LIFO batch:0 <7> DMA32 zone: 511780 pages, LIFO batch:31 <6>Nvidia board detected. Ignoring ACPI timer override. <6>If you got timer trouble try acpi_use_timer_override <6>Detected use of extended apic ids on hypertransport bus <6>ACPI: PM-Timer IO Port: 0x1008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ9 used by override. <7>ACPI: IRQ14 used by override. <7>ACPI: IRQ15 used by override. <6>Using ACPI (MADT) for SMP configuration information <6>SMP: Allowing 2 CPUs, 0 hotplug CPUs <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 <6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 <6>Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) <6>PERCPU: Allocating 69664 bytes of per cpu data <7>NR_CPUS: 4096, nr_cpu_ids: 2, nr_node_ids 1 <4>Built 1 zonelists in Node order, mobility grouping on. Total pages: 515611 <4>Policy zone: DMA32 <5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part11 resume=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 splash=silent vga=0x355 <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 32768 bytes) <6>TSC: PIT calibration confirmed by PMTIMER. <6>TSC: using PIT calibration value <4>Detected 2009.225 MHz processor. <7>spurious 8259A interrupt: IRQ7. <4>Console: colour dummy device 80x25 <6>console [tty0] enabled <6>Checking aperture... <6>No AGP bridge found <6>Node 0: aperture @ 0 size 32 MB <6>Memory: 2036520k/2096000k available (2759k kernel code, 59092k reserved, 2703k data, 1548k init) <7>CPA: page pool initialized 1 of 1 pages preallocated <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.45 BogoMIPS (lpj=8036900) <4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved <6>Security Framework initialized <6>SELinux: Disabled at boot. <6>AppArmor: AppArmor initialized <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) <4>Mount-cache hash table entries: 256 <6>Initializing cgroup subsys ns <6>Initializing cgroup subsys cpuacct <6>Initializing cgroup subsys memory <6>Initializing cgroup subsys devices <6>Initializing cgroup subsys freezer <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <6>CPU 0/0 -> Node 0 <7>tseg: 007ff00000 <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>using C1E aware idle routine <6>ACPI: Core revision 20080609 <6>ACPI: Checking initramfs for custom DSDT <4>Parsing all Control Methods: <4>Table [DSDT](id 0001) - 1045 Objects with 97 Devices 320 Methods 41 Regions <4>Parsing all Control Methods: <4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions <4> tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired <4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful <6>Setting APIC routing to flat <6>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 <6>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 <6>Using local APIC timer interrupts. <7>APIC timer calibration result 12557706 <6>Detected 12.557 MHz APIC timer. <6>Booting processor 1/1 ip 6000 <6>Initializing CPU#1 <6>Calibrating delay using timer specific routine.. 4018.49 BogoMIPS (lpj=8036984) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <6>CPU 1/1 -> Node 0 <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 1 <6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 <6>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 <6>Brought up 2 CPUs <6>Total of 2 processors activated (8036.94 BogoMIPS). <7>CPU0 attaching sched-domain: <7> domain 0: span 0-1 level CPU <7> groups: 0 1 <7> domain 1: span 0-1 level NODE <7> groups: 0-1 <7>CPU1 attaching sched-domain: <7> domain 0: span 0-1 level CPU <7> groups: 1 0 <7> domain 1: span 0-1 level NODE <7> groups: 0-1 <6>net_namespace: 1936 bytes <6>Booting paravirtualized kernel on bare hardware <6>NET: Registered protocol family 16 <7>node 0 link 0: io port [9000, ffff] <6>TOM: 0000000080000000 aka 2048M <7>node 0 link 0: mmio [a0000, bffff] <7>node 0 link 0: mmio [80000000, efffffff] <7>node 0 link 0: mmio [f4000000, fe02ffff] <7>node 0 link 0: mmio [f0000000, f04fffff] <7>bus: [00,04] on node 0 link 0 <7>bus: 00 index 0 io port: [0, ffff] <7>bus: 00 index 1 mmio: [a0000, bffff] <7>bus: 00 index 2 mmio: [80000000, f3ffffff] <7>bus: 00 index 3 mmio: [f4000000, fcffffffff] <6>ACPI: bus type pci registered <5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 <5>PCI: MCFG area at f0000000 reserved in E820 <6>PCI: Using MMCONFIG at f0000000 - f3ffffff <6>PCI: Using configuration type 1 for base access <5>perfmon: version 2.82 <5>perfmon: CPU hotplug support enabled <4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 <4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9 <7>ACPI: EC: Look up EC in DSDT <4>Completing Region/Field/Buffer/Package initialization:.............................................................................................................. <4>Initialized 36/41 Regions 9/9 Fields 39/39 Buffers 26/26 Packages (1062 nodes) <4>Initializing Device/Processor/Thermal objects by executing _INI methods:.. <4>Executed 2 _INI methods requiring 1 _STA executions (examined 102 objects) <4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 1 Runtime GPEs in this block <4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S1 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f] <7>PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f] <7>PCI: 0000:00:01.1 reg 24 io port: [f400, f43f] <6>pci 0000:00:01.1: PME# supported from D3hot D3cold <6>pci 0000:00:01.1: PME# disabled <7>PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff] <7>pci 0000:00:02.0: supports D1 <7>pci 0000:00:02.0: supports D2 <6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:02.0: PME# disabled <7>PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff] <7>pci 0000:00:02.1: supports D1 <7>pci 0000:00:02.1: supports D2 <6>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:02.1: PME# disabled <7>PCI: 0000:00:05.0 reg 10 32bit mmio: [fe028000, fe02bfff] <6>pci 0000:00:05.0: PME# supported from D3hot D3cold <6>pci 0000:00:05.0: PME# disabled <7>PCI: 0000:00:06.0 reg 20 io port: [f000, f00f] <7>PCI: 0000:00:07.0 reg 10 32bit mmio: [fe02d000, fe02dfff] <7>PCI: 0000:00:07.0 reg 14 io port: [ec00, ec07] <7>pci 0000:00:07.0: supports D1 <7>pci 0000:00:07.0: supports D2 <6>pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:07.0: PME# disabled <7>PCI: 0000:00:08.0 reg 10 io port: [9f0, 9f7] <7>PCI: 0000:00:08.0 reg 14 io port: [bf0, bf3] <7>PCI: 0000:00:08.0 reg 18 io port: [970, 977] <7>PCI: 0000:00:08.0 reg 1c io port: [b70, b73] <7>PCI: 0000:00:08.0 reg 20 io port: [d800, d80f] <7>PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02c000, fe02cfff] <6>pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:09.0: PME# disabled <6>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:0b.0: PME# disabled <6>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:0c.0: PME# disabled <6>pci 0000:00:04.0: transparent bridge <7>PCI: bridge 0000:00:04.0 io port: [c000, cfff] <7>PCI: bridge 0000:00:04.0 32bit mmio: [fdd00000, fddfffff] <7>PCI: bridge 0000:00:04.0 32bit mmio pref: [fde00000, fdefffff] <7>PCI: 0000:02:00.0 reg 10 64bit mmio: [e0000000, efffffff] <7>PCI: 0000:02:00.0 reg 18 64bit mmio: [fdcf0000, fdcfffff] <7>PCI: 0000:02:00.0 reg 20 io port: [bc00, bcff] <7>PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff] <7>pci 0000:02:00.0: supports D1 <7>pci 0000:02:00.0: supports D2 <7>PCI: 0000:02:00.1 reg 10 64bit mmio: [fdce0000, fdceffff] <7>pci 0000:02:00.1: supports D1 <7>pci 0000:02:00.1: supports D2 <4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:09.0. It can be enabled forcedly with 'pcie_aspm=force' <7>PCI: bridge 0000:00:09.0 io port: [b000, bfff] <7>PCI: bridge 0000:00:09.0 32bit mmio: [fdc00000, fdcfffff] <7>PCI: bridge 0000:00:09.0 64bit mmio pref: [e0000000, efffffff] <7>PCI: bridge 0000:00:0b.0 io port: [a000, afff] <7>PCI: bridge 0000:00:0b.0 32bit mmio: [fdb00000, fdbfffff] <7>PCI: bridge 0000:00:0b.0 64bit mmio pref: [fda00000, fdafffff] <7>PCI: bridge 0000:00:0c.0 io port: [9000, 9fff] <7>PCI: bridge 0000:00:0c.0 32bit mmio: [fd900000, fd9fffff] <7>PCI: bridge 0000:00:0c.0 64bit mmio pref: [fd800000, fd8fffff] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] <6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15) <6>ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15) <6>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) <6>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) <6>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. <6>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. <6>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. <6>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 <6>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 <6>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <6>pnp: PnP ACPI: found 13 devices <6>ACPI: ACPI bus type pnp unregistered <6>PCI: Using ACPI for IRQ routing <6>AppArmor: AppArmor Filesystem Enabled <4>ACPI: RTC can wake from S4 <6>system 00:01: ioport range 0x1000-0x107f has been reserved <6>system 00:01: ioport range 0x1080-0x10ff has been reserved <6>system 00:01: ioport range 0x1400-0x147f has been reserved <6>system 00:01: ioport range 0x1480-0x14ff has been reserved <6>system 00:01: ioport range 0x1800-0x187f has been reserved <6>system 00:01: ioport range 0x1880-0x18ff has been reserved <6>system 00:01: ioport range 0x2000-0x207f has been reserved <6>system 00:01: ioport range 0x2080-0x20ff has been reserved <6>system 00:01: iomem range 0xfec80000-0xfecbffff could not be reserved <6>system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved <6>system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved <6>system 00:02: ioport range 0x4d0-0x4d1 has been reserved <6>system 00:02: ioport range 0x800-0x87f has been reserved <6>system 00:02: ioport range 0x290-0x297 has been reserved <6>system 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved <6>system 00:0c: iomem range 0xf0000-0xfffff could not be reserved <6>system 00:0c: iomem range 0xfeff0000-0xfeff00ff could not be reserved <6>system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved <6>system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved <6>system 00:0c: iomem range 0x0-0x9ffff could not be reserved <6>system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved <6>system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved <6>system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved <6>system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved <6>system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved <6>system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved <6>system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved <6>pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 <6>pci 0000:00:04.0: IO window: 0xc000-0xcfff <6>pci 0000:00:04.0: MEM window: 0xfdd00000-0xfddfffff <6>pci 0000:00:04.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff <6>pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 <6>pci 0000:00:09.0: IO window: 0xb000-0xbfff <6>pci 0000:00:09.0: MEM window: 0xfdc00000-0xfdcfffff <6>pci 0000:00:09.0: PREFETCH window: 0x000000e0000000-0x000000efffffff <6>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 <6>pci 0000:00:0b.0: IO window: 0xa000-0xafff <6>pci 0000:00:0b.0: MEM window: 0xfdb00000-0xfdbfffff <6>pci 0000:00:0b.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff <6>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 <6>pci 0000:00:0c.0: IO window: 0x9000-0x9fff <6>pci 0000:00:0c.0: MEM window: 0xfd900000-0xfd9fffff <6>pci 0000:00:0c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff <7>pci 0000:00:04.0: setting latency timer to 64 <7>pci 0000:00:09.0: setting latency timer to 64 <7>pci 0000:00:0b.0: setting latency timer to 64 <7>pci 0000:00:0c.0: setting latency timer to 64 <6>bus: 00 index 0 io port: [0, ffff] <6>bus: 00 index 1 mmio: [0, ffffffffffffffff] <6>bus: 01 index 0 io port: [c000, cfff] <6>bus: 01 index 1 mmio: [fdd00000, fddfffff] <6>bus: 01 index 2 mmio: [fde00000, fdefffff] <6>bus: 01 index 3 io port: [0, ffff] <6>bus: 01 index 4 mmio: [0, ffffffffffffffff] <6>bus: 02 index 0 io port: [b000, bfff] <6>bus: 02 index 1 mmio: [fdc00000, fdcfffff] <6>bus: 02 index 2 mmio: [e0000000, efffffff] <6>bus: 02 index 3 mmio: [0, 0] <6>bus: 03 index 0 io port: [a000, afff] <6>bus: 03 index 1 mmio: [fdb00000, fdbfffff] <6>bus: 03 index 2 mmio: [fda00000, fdafffff] <6>bus: 03 index 3 mmio: [0, 0] <6>bus: 04 index 0 io port: [9000, 9fff] <6>bus: 04 index 1 mmio: [fd900000, fd9fffff] <6>bus: 04 index 2 mmio: [fd800000, fd8fffff] <6>bus: 04 index 3 mmio: [0, 0] <6>NET: Registered protocol family 2 <7>Switched to high resolution mode on CPU 0 <7>Switched to high resolution mode on CPU 1 <6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>TCP: Hash tables configured (established 262144 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <6>Unpacking initramfs... done <6>Freeing initrd memory: 6004k freed <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1226563047.900:1): initialized <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>msgmni has been set to 997 <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>perfmon: added sampling format default <6>pci 0000:00:00.0: Enabling HT MSI Mapping <6>pci 0000:00:04.0: Enabling HT MSI Mapping <6>pci 0000:00:05.0: Enabling HT MSI Mapping <6>pci 0000:00:07.0: Enabling HT MSI Mapping <6>pci 0000:00:08.0: Enabling HT MSI Mapping <6>pci 0000:00:09.0: Enabling HT MSI Mapping <6>pci 0000:00:0b.0: Enabling HT MSI Mapping <6>pci 0000:00:0c.0: Enabling HT MSI Mapping <7>pci 0000:02:00.0: Boot video device <7>pcieport-driver 0000:00:09.0: setting latency timer to 64 <6>pcieport-driver 0000:00:09.0: found MSI capability <7>pci_express 0000:00:09.0:pcie00: allocate port service <7>pci_express 0000:00:09.0:pcie03: allocate port service <7>pcieport-driver 0000:00:0b.0: setting latency timer to 64 <6>pcieport-driver 0000:00:0b.0: found MSI capability <7>pci_express 0000:00:0b.0:pcie00: allocate port service <7>pci_express 0000:00:0b.0:pcie03: allocate port service <7>pcieport-driver 0000:00:0c.0: setting latency timer to 64 <6>pcieport-driver 0000:00:0c.0: found MSI capability <7>pci_express 0000:00:0c.0:pcie00: allocate port service <7>pci_express 0000:00:0c.0:pcie03: allocate port service <6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004980000, using 7776k, total 16384k <6>vesafb: mode is 1152x864x16, linelength=2304, pages=7 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture... <6>bootsplash: silentjpeg size 153527 bytes <6>bootsplash: ...found (1152x864, 183387 bytes, v3). <4>Console: switching to colour frame buffer device 140x50 <6>fb0: VESA VGA frame buffer device <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.103 <6>Serial: 8250/16550 driver8 ports, IRQ sharing disabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>TCP cubic registered <4>registered taskstats version 1 <6>Freeing unused kernel memory: 1548k freed <6>Write protecting the kernel read-only data: 5096k <6>processor ACPI0007:00: registered as cooling_device0 <6>processor ACPI0007:01: registered as cooling_device1 <6>thermal LNXTHERM:01: registered as thermal_zone0 <6>ACPI: Thermal Zone [THRM] (40 C) <6>Uniform Multi-Platform E-IDE driver <6>amd74xx 0000:00:06.0: UDMA133 controller <6>amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2) <6>amd74xx 0000:00:06.0: IDE port disabled <6>amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0xf000-0xf007 <7>Probing IDE interface ide0... <4>logips2pp: Detected unknown logitech mouse model 127 <6>hda: DVD DC 16X8X5, ATAPI CD/DVD-ROM drive <6>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1 <6>hdb: HDS722516VLAT80, ATA DISK drive <7>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 <6>hda: UDMA/66 mode selected <7>hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 <6>hdb: UDMA/100 mode selected <6>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>isa bounce pool size: 16 pages <6>ACPI: No dock devices found. <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>sata_nv 0000:00:08.0: version 3.5 <4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 <6>sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 <7>sata_nv 0000:00:08.0: setting latency timer to 64 <6>scsi0 : sata_nv <6>scsi1 : sata_nv <6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 <6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 <6>fan PNP0C0B:00: registered as cooling_device2 <6>ACPI: Fan [FAN] (on) <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <6>udevd version 128 started <6>: usbcore: registered new interface driver usbfs <6>: usbcore: registered new interface driver hub <6>: usbcore: registered new device driver usb <6>hdb: max request size: 512KiB <6>hdb: Host Protected Area detected. <6> current capacity is 321670847 sectors (164695 MB) <6> native capacity is 321672960 sectors (164696 MB) <4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 <6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 <7>ehci_hcd 0000:00:02.1: setting latency timer to 64 <6>ehci_hcd 0000:00:02.1: EHCI Host Controller <6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:02.1: debug port 1 <7>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported <6>ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 <6>hdb: Host Protected Area disabled. <6>hdb: 321672960 sectors (164696 MB) w/7938KiB Cache, CHS=20023/255/63 <7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver <6>hdb: cache flushes supported <6> hdb:<6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb1: configuration #1 chosen from 1 choice <4> hdb1 hdb2 <<6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 8 ports detected <4> hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 hdb13 > <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.27.5-1-default ehci_hcd <6>usb usb1: SerialNumber: 0000:00:02.1 <4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 <6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 <7>ohci_hcd 0000:00:02.0: setting latency timer to 64 <6>ohci_hcd 0000:00:02.0: OHCI Host Controller <6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 <6>ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 8 ports detected <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: OHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.27.5-1-default ohci_hcd <6>usb usb2: SerialNumber: 0000:00:02.0 <6>PM: Starting manual resume from disk <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb11, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>udevd version 128 started <6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 <6>ACPI: Power Button (FF) [PWRF] <6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 <6>ACPI: Power Button (CM) [PWRB] <6>Floppy drive(s): fd0 is 1.44M <6>input: PC Speaker as /devices/platform/pcspkr/input/input4 <6>FDC 0 is a post-1991 82077 <6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. <4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 <6>forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 <7>forcedeth 0000:00:07.0: setting latency timer to 64 <6>hda: ATAPI 126X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache <6>Uniform CD-ROM driver Revision: 3.20 <6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 <6>: rtc0: alarms up to one year, y3k <4>hda: command error: status=0x51 { DriveReady SeekComplete Error } <4>hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } <4>ide: failed opcode was: unknown <3>ATAPI device hda: <4> Error: Illegal request -- (Sense key=0x05) <3> Logical block address out of range -- (asc=0x21, ascq=0x00) <3> The failed "Read 10" packet command was: <3> "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 " <3>end_request: I/O error, dev hda, sector 0 <3>Buffer I/O error on device hda, logical block 0 <4>hda: command error: status=0x51 { DriveReady SeekComplete Error } <4>hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } <4>ide: failed opcode was: unknown <3>ATAPI device hda: <4> Error: Illegal request -- (Sense key=0x05) <3> Logical block address out of range -- (asc=0x21, ascq=0x00) <3> The failed "Read 10" packet command was: <3> "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 " <3>end_request: I/O error, dev hda, sector 0 <3>Buffer I/O error on device hda, logical block 0 <6>forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:1b:b9:c9:34:4c <6>forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 <6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 <6>i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 <4>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 <6>HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 <7>HDA Intel 0000:00:05.0: setting latency timer to 64 <6>hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... <7>ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:3051: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:3055: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:3056: mono: mono_out=0x0 <7>ALSA sound/pci/hda/hda_codec.c:3064: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 <6>Adding 771080k swap on /dev/hdb9. Priority:-1 extents:1 across:771080k <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com <6>loop: module loaded <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb10, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb12, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb8, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb13, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb7, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>fuse init (API version 7.9) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu Nov 13 08:59:01 2008 done Starting udevd: done Loading drivers, configuring devices: done Loading required kernel modules doneActivating swap-devices in /etc/fstab... done[mntent]: warning: no final newline at the end of /etc/fstab Setting up the hardware clockdone Activating device mapper... done Starting MD Raid unused Checking file systems... fsck 1.41.1 (01-Sep-2008) /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part10: clean, 162006/1311552 files, 1228772/2622611 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part6: clean, 78/40160 files, 66484/160616 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part12: clean, 10230/328000 files, 317381/1311282 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part8: clean, 69742/2626560 files, 4018842/5242880 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part13: clean, 4468/3006464 files, 6818055/11994522 blocks /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part7: clean, 1802/328000 files, 51300/1311297 blocks donedone Mounting local file systems... /proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) [mntent]: warning: no final newline at the end of /etc/fstab [mntent]: warning: no final newline at the end of /etc/fstab debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) [mntent]: warning: no final newline at the end of /etc/fstab /dev/hdb10 on /10.3 type ext3 (rw) /dev/hdb6 on /boot type ext2 (rw) /dev/hdb12 on /home type ext3 (rw) /dev/hdb8 on /home10.3 type ext3 (rw,acl,user_xattr) /dev/hdb13 on /spare type ext3 (rw,acl,user_xattr) /dev/hdb7 on /tmp type ext3 (rw) Unexpected clusters per mft record (-1). Failed to mount '/dev/hdb1': Ongeldig argument The device '/dev/hdb1' doesn't have a valid NTFS. Maybe you selected the wrong device? Or the whole disk instead of a partition (e.g. /dev/hda, not /dev/hda1)? Or the other way around? failedFuse filesystem already availabledone Mounting fuse control filesystemdone Activating remaining swap-devices in /etc/fstab... done<notice>killproc: kill(660,29) Creating /var/log/boot.msg doneConfiguring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A Configured serial ports doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 net.ipv4.conf.default.promote_secondaries = 1 net.ipv4.conf.all.promote_secondaries = 1 done Enabling syn flood protectiondone Disabling IP forwardingdone done Setting up hostname 'AMD64x2-sfn1'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles done System Boot Control: The system has been set up Skipped features: boot.md boot.cycle System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(660,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Thu Nov 13 08:59:16 2008 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/acpid ] Initializing random number generatordone Starting acpid done <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/ PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/ PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone Starting D-Bus daemondone Starting Firewall Initialization (phase 1 of 2) done Loading CPUFreq modulesdone Starting HAL daemon<notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/rpcbind ] <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/sbin/auditd ] <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ] Starting rpcbind done Starting Samba NMB daemon done done Starting auditd done Mount CIFS File Systems unused <notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/ LANG=nl_NL.UTF-8 PREVLEVEL=N LINES=50 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/bin/kdm ] Starting service kdmdone Backgrounding to notify hosts... Not starting NFS client services - no NFS found in /etc/fstab:unused Loading console font lat9w-16.psfu -m trivial G0:loadable doneLoading keymap assuming iso-8859-15 euro Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz doneLoading compose table latin1.adddone Start Unicode mode done<notice>checkproc: /usr/bin/kdm 2302 <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] <notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ] Starting cupsddone Starting irqbalance done Starting java.binfmt_misc done <notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts DO_CONFIRM= vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/etc/sysconfig/network PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] Starting the NetworkManagerdone Starting Avahi daemon done Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done Starting Avahi DNS Configuration daemon done No active profileunused Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg LANG=nl_NL.UTF-8 PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/smbd ] Starting Samba SMB daemon done <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting SSH daemondone Starting smartd done done Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting Firewall Initialization (phase 2 of 2) done done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: nfs smbfs pm-profiler <notice>killproc: kill(1860,3) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c1 --- Comment #1 from Robby Verberne <monkey9@iae.nl> 2008-11-13 01:54:05 MST --- It is not realy visible, exept that in the checks, part 11 does not show. I have no reason for that. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 Robert Vojcik <rvojcik@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team-screening@forge.provo.novell.com |kernel-maintainers@forge.provo.novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 Greg Kroah-Hartman <gregkh@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel-maintainers@forge.provo.novell.com |kasievers@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c2 Kay Sievers <kasievers@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #2 from Kay Sievers <kasievers@novell.com> 2008-11-13 18:28:24 MST --- Please explain: what happens, and what you expect to happen. "boot delay" is by far not a sufficient description. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c3 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #3 from Robby Verberne <monkey9@iae.nl> 2008-11-14 01:43:24 MST --- Normaly booting follows the procedure to read from the partition that is named to be the holder of the filesystem that is expected to be booted. In this case it seems that this partition is not present, and that searching is going on to find it, shown by dots that add up, marked by the message waiting for partition (11) to appear........ when it is found, it asks me if i want to use that partition? y/n And if i do nothing, it sits there waiting for me to confirm the wanted action. Then it boots. This is what happens. What i expect to happen is that the partition that is written in grub as belonging to the kernel marked for booting, is booted, nothing more, and nothing less. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c4 Kay Sievers <kasievers@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #4 from Kay Sievers <kasievers@novell.com> 2008-11-14 06:21:43 MST --- You expect this as your root device: /dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part11 but your block devices show up as hd* not as sd* devices. hd* devices don't create any scsi-* device links, that's why it fails. Any reason to use IDE drivers instead of libata drivers? Did you specify that, or did the system switch over to IDE drivers and you don't know why? What does: grep INITRD /etc/sysconfig/kernel print? If you build your initramfs, what does: mkinitrd print? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c5 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #5 from Robby Verberne <monkey9@iae.nl> 2008-11-14 06:36:51 MST --- (In reply to comment #4 from Kay Sievers)
Any reason to use IDE drivers instead of libata drivers? Did you specify that, or did the system switch over to IDE drivers and you don't know why?
This is an action decided by the system alone, and not ordered by me. And indeed, i do know of a bug that mentions that: bug 440986 , but i do not know why this happens.
What does: grep INITRD /etc/sysconfig/kernel print?
oddball@AMD64x2-sfn1:~> grep INITRD /etc/sysconfig/kernel INITRD_MODULES="processor thermal amd74xx sata_nv pata_amd pata_acpi ata_generic ide_pci_generic fan jbd ext3 edd" DOMU_INITRD_MODULES="xennet xenblk"
If you build your initramfs, what does: mkinitrd print?
AMD64x2-sfn1:/home/oddball # mkinitrd Kernel image: /boot/vmlinuz-2.6.27.5-1-default Initrd image: /boot/initrd-2.6.27.5-1-default Root device: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 (/dev/hdb11) (mounted on / as ext3) Resume device: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 (/dev/hdb9) Kernel Modules: hwmon thermal_sys processor thermal ide-core amd74xx dock scsi_mod libatasata_nv pata_amd pata_acpi ata_generic ide-pci-generic fan jbd mbcache ext3 edd ide-disk usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1152x864) 53609 blocks AMD64x2-sfn1:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c6 --- Comment #6 from Kay Sievers <kasievers@novell.com> 2008-11-14 06:49:31 MST --- (In reply to comment #5 from Robby Verberne)
(In reply to comment #4 from Kay Sievers)
Any reason to use IDE drivers instead of libata drivers? Did you specify that, or did the system switch over to IDE drivers and you don't know why?
This is an action decided by the system alone, and not ordered by me. And indeed, i do know of a bug that mentions that: bug 440986 , but i do not know why this happens.
Ok, looks like this bug: https://bugzilla.novell.com/show_bug.cgi?id=441384
INITRD_MODULES="processor thermal amd74xx sata_nv pata_amd pata_acpi ata_generic ide_pci_generic fan jbd ext3 edd"
"amd74xx ata_generic ide_pci_generic" should not be in here, or at least not mentioned before "pata_amd". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c7 --- Comment #7 from Robby Verberne <monkey9@iae.nl> 2008-11-14 07:19:06 MST --- OK, does deleting that phrase solve my problem, or is there something else i can do to workaround it? Does changing hd* to sd* (all partitions) solve something, or isn't it that easy? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c8 Kay Sievers <kasievers@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #8 from Kay Sievers <kasievers@novell.com> 2008-11-14 08:32:01 MST --- (In reply to comment #7 from Robby Verberne)
OK, does deleting that phrase solve my problem, or is there something else i can do to workaround it? Does changing hd* to sd* (all partitions) solve something, or isn't it that easy?
libata drivers (sd*) should be used not IDE(hd*). You may try to replace: INITRD_MODULES="processor thermal amd74xx sata_nv pata_amd pata_acpi ata_generic ide_pci_generic fan jbd ext3 edd" with: INITRD_MODULES="processor thermal pata_amd sata_nv pata_acpi fan jbd ext3 edd" and run: mkinitrd again. What does mkinitrd print after you changed the module list? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c9 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #9 from Robby Verberne <monkey9@iae.nl> 2008-11-17 13:49:40 MST --- AMD64x2-sfn1:/home/oddball # mkinitrd Kernel image: /boot/vmlinuz-2.6.27.5-1-default Initrd image: /boot/initrd-2.6.27.5-1-default Root device: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 (/dev/hdb11) (mounted on / as ext3) Resume device: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 (/dev/hdb9) Kernel Modules: hwmon thermal_sys processor thermal dock scsi_mod libata pata_amd sata_nvpata_acpi fan jbd mbcache ext3 edd ata_generic ide-core ide-pci-generic amd74xx ide-disk usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1152x864) 53609 blocks AMD64x2-sfn1:/home/oddball # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c10 --- Comment #10 from Robby Verberne <monkey9@iae.nl> 2008-11-17 14:33:18 MST --- Now the system doesn't boot anymore.. I replaced the the string in my 10.3 install, but i donot know how to mkinitrd from there...... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c11 Kay Sievers <kasievers@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #11 from Kay Sievers <kasievers@novell.com> 2008-11-17 18:14:52 MST --- (In reply to comment #10 from Robby Verberne)
Now the system doesn't boot anymore.. I replaced the the string in my 10.3 install, but i donot know how to mkinitrd from there......
A 10.3 install, didn't you test a 11.1 installation? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c12 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|monkey9@iae.nl | --- Comment #12 from Robby Verberne <monkey9@iae.nl> 2008-11-19 09:33:24 MST --- (In reply to comment #11 from Kay Sievers)
A 10.3 install, didn't you test a 11.1 installation?
Offcourse i did.. But after 11.1B4.6 did not boot anymore, i tried to reverse the modulelist to the previous state, on my 10.3 install, which is also on the same mbox, which offcourse worked. But i cannot make an initrd for 11.1B, from 10.3. That is why i asked if there is a way to do that when a an Os has not been booted up yet. If not, i have to reinstall new. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c13 --- Comment #13 from Kay Sievers <kasievers@novell.com> 2008-11-19 09:44:35 MST --- (In reply to comment #12 from Robby Verberne)
But after 11.1B4.6 did not boot anymore, i tried to reverse the modulelist to the previous state, on my 10.3 install, which is also on the same mbox, which offcourse worked. But i cannot make an initrd for 11.1B, from 10.3.
There is a good chance, that you will be able to run the 11.1 installation with the kernel and initrd from the 10.3 installation. At the first boot prompt, you can "ESC" to the grub boot menu and edit the root= line, and pass the partition of the 11.1 installation, like "root=/dev/sdb11" (or whatever it actually is, in 10.3). Some recent tools which depend on new kernel features may not be fully working, but mkinitrd should work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c14 --- Comment #14 from Robby Verberne <monkey9@iae.nl> 2008-11-19 12:25:42 MST --- No, that does not work, helas, not tested well i guess: 'unrecognised devicestring', appears with any input you make... And then there is offcourse the rediculous drivename: root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part11 resume=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 scsi-SATA or ata, not found.. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c15 --- Comment #15 from Robby Verberne <monkey9@iae.nl> 2008-11-19 12:28:53 MST --- But i will try some more, and if i cann't get 11.1 to boot, i'll install B5. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c16 --- Comment #16 from Kay Sievers <kasievers@novell.com> 2008-11-19 13:17:10 MST --- (In reply to comment #14 from Robby Verberne)
No, that does not work, helas, not tested well i guess: 'unrecognised devicestring', appears with any input you make...
That should not happen. The kernel should boot in any case. If the device is not found, it may not continue, but it would boot until we reach the point it tries to mount. Did you press ESC, and entered the grub menu on startup? It's the black/white screen, not the green SUSE screen.
And then there is offcourse the rediculous drivename: root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part11
You can just use the kernel names /dev/sdb11 or /dev/hdb11, or whatever the devices are. You can find out when you type "mount" and look for the "/" entry while the 10.3 system is booted. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c17 --- Comment #17 from Robby Verberne <monkey9@iae.nl> 2008-11-19 23:47:08 MST --- (In reply to comment #16 from Kay Sievers)
That should not happen. The kernel should boot in any case. If the device is not found, it may not continue, but it would boot until we reach the point it tries to mount.
It should not, but it does all the same..
Did you press ESC, and entered the grub menu on startup? It's the black/white screen, not the green SUSE screen.
Yes, and press 'c' for the commandline..
You can just use the kernel names /dev/sdb11 or /dev/hdb11, or whatever the devices are. You can find out when you type "mount" and look for the "/" entry while the 10.3 system is booted.
Maybe that used to be, but i tried all names, zilch.. When entering the kernel, it returns with some code, same with initrd, but the drive is allways errorcode 11: unrecognised device string. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c18 --- Comment #18 from Kay Sievers <kasievers@novell.com> 2008-11-20 01:08:33 MST --- (In reply to comment #17 from Robby Verberne)
Did you press ESC, and entered the grub menu on startup? It's the black/white screen, not the green SUSE screen.
Yes, and press 'c' for the commandline..
Oh, no, not 'c'. Highlight the entry you want to boot with up/down cursor keys, type 'e'. Highlight the "kernel ..." line, type 'e' again Use cursor keys and edit the root=... line Press ESC, and ENTER -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c19 --- Comment #19 from Robby Verberne <monkey9@iae.nl> 2008-11-20 01:27:51 MST --- This i did not know.. Looks very smooth! Anyway, i did not know this yet, so i downloaded Netboot142, and tried the repair option boot installed os. This worked, and now i am reading this from the 11.1B4.6 install. I'll mkinitrd, and look if it boots from itself afterwards, but i will try this very usefull hint, you gave me here! Thnxalot;) (if it works i'll let you know..) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c20 --- Comment #20 from Robby Verberne <monkey9@iae.nl> 2008-11-20 01:57:59 MST --- It booted, with offcourse the 'old' waiting routine, but it booted... And, well, it would have been a very nice option, to be able to edit the entrance, if the changes would be saved, but they arent. The original partition belonging to that entrance gets booted. If i go back and edit again, the changes i made are allready undone.. Unless i made a mistake, and the changes should have been saved by fi ctrl-ENTER. (i saved them with ENTER) Then offcourse, i am not root, and when i want to alter the bootloader inside the os, i have to be. Am i doing something wrong here? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c21 --- Comment #21 from Robby Verberne <monkey9@iae.nl> 2008-11-20 11:36:25 MST --- OS: Linux 2.6.27.5-2-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.1 Beta 5.1 (x86_64) KDE: 4.1.3 (KDE 4.1.3) "release 2.1" no more delay... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c22 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED --- Comment #22 from Robby Verberne <monkey9@iae.nl> 2008-11-21 07:59:51 MST --- will close this bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c23 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|FIXED | --- Comment #23 from Robby Verberne <monkey9@iae.nl> 2009-01-05 02:12:14 MST --- OS: Linux 2.6.27.8-1-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.2 Alpha 0 (x86_64) KDE: 4.1.3 (KDE 4.1.3) "release 66.4" Has this again. /by-id/scusi-SATA_ is written in menu.lst, but somehow only /by-id/ata_ seems to boot. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c24 --- Comment #24 from Robby Verberne <monkey9@iae.nl> 2009-01-05 02:15:35 MST --- fstab entrance: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 / menu.lst: kernel /vmlinuz-2.6.27.8-1-default root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part11 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c25 Kay Sievers <kasievers@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #25 from Kay Sievers <kasievers@novell.com> 2009-01-08 07:46:19 MST --- There are no known remaining issues with that problem in the released version. You see this in a new installation of openSUSE11.1, or still in an updated beta version? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c26 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |REOPENED Info Provider|monkey9@iae.nl | --- Comment #26 from Robby Verberne <monkey9@iae.nl> 2009-01-21 13:22:48 MST --- I see this atm in an updated 11.2 version: updated from : OS: Linux 2.6.27.8-1-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.2 Alpha 0 (x86_64) KDE: 4.1.3 (KDE 4.1.3) "release 4.18" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c27 --- Comment #27 from Kay Sievers <kasievers@novell.com> 2009-01-22 07:19:56 MST --- This updated system was a beta version of 11.1? Then it likely has something left from the broken 11.1 beta version, which causes this failure. We have no indication that there is any such problem after the fixes went in in the later betas. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 Kay Sievers <kasievers@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |NEEDINFO Info Provider| |monkey9@iae.nl -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c28 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |REOPENED Info Provider|monkey9@iae.nl | --- Comment #28 from Robby Verberne <monkey9@iae.nl> 2009-01-29 01:54:51 MST --- Sorry, if you would read my comment #23 , you would see that it was already 11.2 A0. But i will upgrade again, and see what happens... (had a long time-out, due to nessesary repairs and other pericles.. ;) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c29 Kay Sievers <kasievers@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |NEEDINFO Info Provider| |monkey9@iae.nl --- Comment #29 from Kay Sievers <kasievers@novell.com> 2009-01-29 03:27:10 MST --- (In reply to comment #28)
Sorry, if you would read my comment #23 , you would see that it was already 11.2 A0.
It does not matter which version has that problem, it matters if you *upgraded* the system to that version, or did a *fresh* install of that version. So please answer comment#27. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c30 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |REOPENED Info Provider|monkey9@iae.nl | --- Comment #30 from Robby Verberne <monkey9@iae.nl> 2009-01-31 05:41:28 MST --- Yes, i upgraded to that version. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c31 --- Comment #31 from Kay Sievers <kasievers@novell.com> 2009-01-31 06:40:44 MST --- (In reply to comment #30)
Yes, i upgraded to that version.
From the "broken" earlier version, I guess, there is likely something left-over in: /boot/grub/menu.lst /etc/sysconfig/kernel which confuses the upgraded setup.
-- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c32 --- Comment #32 from Robby Verberne <monkey9@iae.nl> 2009-01-31 07:01:17 MST --- Possibly, i am going to upgrade now to see if something changes. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c33 --- Comment #33 from Robby Verberne <monkey9@iae.nl> 2009-01-31 09:42:34 MST --- OS: Linux 2.6.27.10-2-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.2 Alpha 0 (x86_64) KDE: 4.2.00 (KDE 4.2.0) "release 82.4" Does not change the behaviour. Do you have a suggestion on how to solve this issue? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c34 --- Comment #34 from Kay Sievers <kasievers@novell.com> 2009-01-31 10:05:54 MST --- (In reply to comment #33)
Does not change the behaviour. Do you have a suggestion on how to solve this issue?
As said, I expect there is some left-over from the broken beta installation. If you attach /boot/grub/menu.lst and /etc/sysconfig/kernel, maybe I can see something which is wrong. If I can not find anything, I have no real idea how to debug that issue from remote. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c35 --- Comment #35 from Robby Verberne <monkey9@iae.nl> 2009-01-31 10:26:53 MST --- Created an attachment (id=269088) --> (https://bugzilla.novell.com/attachment.cgi?id=269088) menu.lst -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c36 --- Comment #36 from Robby Verberne <monkey9@iae.nl> 2009-01-31 10:29:05 MST --- Created an attachment (id=269089) --> (https://bugzilla.novell.com/attachment.cgi?id=269089) etc/sysconfig/kernel -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c37 --- Comment #37 from Robby Verberne <monkey9@iae.nl> 2009-01-31 10:29:45 MST --- as requested.. ;) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c38 --- Comment #38 from Kay Sievers <kasievers@novell.com> 2009-01-31 11:37:37 MST --- It is likely caused by: INITRD_MODULES= ... amd74xx ... in: /etc/sysconfig/kernel the old IDE driver amd74xx should not be there. Also ide_pci_generic should not be included in the initramfs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c39 --- Comment #39 from Robby Verberne <monkey9@iae.nl> 2009-02-01 02:24:58 MST --- The last time i made alterations there resulted in an unbootable system, which i had to repair from another install. An online upgrade fixed that than...as you will remember from last time... There is no damage or such, just i have to be present to complete booting. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c40 --- Comment #40 from Robby Verberne <monkey9@iae.nl> 2009-02-01 02:26:29 MST --- OS: Linux 2.6.27.10-2-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.2 Alpha 0 (x86_64) KDE: 4.2.00 (KDE 4.2.0) "release 83.1" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c41 --- Comment #41 from Robby Verberne <monkey9@iae.nl> 2009-02-17 03:11:47 MST --- OS: Linux 2.6.27.13-3-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.2 Alpha 0 (x86_64) KDE: 4.2.00 (KDE 4.2.0) "release 97" After update still the same.. @kay, Do you know how to workaround or fix this? It realy starts to get annoying... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c42 --- Comment #42 from Kay Sievers <kasievers@novell.com> 2009-02-17 03:20:35 MST --- No idea, sorry. The problem will not go away with an update. You have some stuff left over from a broken beta, but I can not tell for sure what you need to fix. You said in comment#39 you fear an unbootable system, if you change things, so I don't know what to do. In any way, as long as you have "amd74xx" in /etc/sysconfig/kernel, it can not work as expected. I may need changes to: /etc/sysconfig/kernel /boot/grub/menu.lst /etc/fstab -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c43 --- Comment #43 from Robby Verberne <monkey9@iae.nl> 2009-02-17 04:01:14 MST --- (In reply to comment #42)
No idea, sorry. The problem will not go away with an update. You have some stuff left over from a broken beta, but I can not tell for sure what you need to fix.
It did go away after an update: comment#21
You said in comment#39 you fear an unbootable system, if you change things, so I don't know what to do.
the things you suggested did not have the right outcome at the time , no..
In any way, as long as you have "amd74xx" in /etc/sysconfig/kernel, it can not work as expected.
That i fully undersrtand..
I may need changes to: /etc/sysconfig/kernel /boot/grub/menu.lst /etc/fstab
They all have to change, i know. But how to proper change /etc/sysconfig/kernel ? That is the point. If mkinitrd is done with the wrong entrance, the system gets unbootable. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c44 --- Comment #44 from Robby Verberne <monkey9@iae.nl> 2009-03-04 11:36:05 MST --- The outcome of:grep INITRD /etc/sysconfig/kernel is slightly different from the earlier one: oddball@AMD64x2-sfn1:~> grep INITRD /etc/sysconfig/kernelINITRD_MODULES="processor thermal amd74xx sata_nv pata_amd ata_generic ide_pci_generic fan jbd ext3 edd pata_acpi" DOMU_INITRD_MODULES="xennet xenblk" oddball@AMD64x2-sfn1:~> AMD64x2-sfn1:/home/oddball # mkinitrd Kernel image: /boot/vmlinuz-2.6.29-rc5-1-default Initrd image: /boot/initrd-2.6.29-rc5-1-default Root device: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 (/dev/hdb11) (mounted on / as ext3) Resume device: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 (/dev/hdb9) Kernel Modules: hwmon thermal_sys processor thermal ide-core amd74xx scsi_mod libata sata_nv pata_amd ata_generic ide-pci-generic fan jbd mbcache ext3 edd pata_acpi ide-gd_mod usbcore ohci-hcd ehci-hcd uhci-hcd hid usbhid Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1152x864) 25757 blocks AMD64x2-sfn1:/home/oddball # what do you suggest i have to change in: /etc/sysconfig/kernel ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c45 --- Comment #45 from Kay Sievers <kasievers@novell.com> 2009-03-05 05:20:32 MST --- (In reply to comment #44)
grep INITRD /etc/sysconfig/kernel INITRD_MODULES="processor thermal amd74xx sata_nv pata_amd ata_generic ide_pci_generic fan jbd ext3 edd pata_acpi"
what do you suggest i have to change in: /etc/sysconfig/kernel ?
Besides the issue, that it may not boot with a changed list, like it did for an unknown reason the last time, it must not contain old IDE drivers like "amd74xx" and "ide_pci_generic". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c46 --- Comment #46 from Robby Verberne <monkey9@iae.nl> 2009-03-05 06:28:54 MST --- what about the name it looks for? menu.lst ###Don't change this comment - YaST2 identifier: Original name: linux### title openSUSE 11.2 Alpha 0 - 2.6.29-rc6-git1-2 root (hd0,5) kernel /vmlinuz-2.6.29-rc6-git1-2-default root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part10 resume=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 splash=silent showopts vga=0x355 initrd /initrd-2.6.29-rc6-git1-2-default What i see her is: Part10, should be part11 and: root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part10 resume: resume=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 fstab:/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 / ext3 defaults 1 1 So i take the unwanted modules out of /etc/sysconfig/kernel, save, change the entrance in menu.lst from: root=/dev/disk/by-id/scsi-SATA_HDS722516VLAT80_VN643ECDEW7U8F-part10 to: root=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 save, leave the entrance in /etc/fstab untouched, mkinitrd, and reboot. Should this be correct? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c47 --- Comment #47 from Kay Sievers <kasievers@novell.com> 2009-03-05 16:47:22 MST --- Hmm, hard to tell from remote. :) Which one is your actual rootfs, what does: mountpoint -d / on the running box print? If it's 8:11, it should be: root=/dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 which should be the identical in fstab and menu.lst. What does "root (hd0,5)" mean? You have a /boot partition? What is on /dev/hda6 or /dev/sda6? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c48 --- Comment #48 from Robby Verberne <monkey9@iae.nl> 2009-03-06 02:24:10 MST --- oddball@AMD64x2-sfn1:~> mountpoint -d / 3:75 I do have a boot partition yes. What is confusing is that the names used by grub, fstab and partioner are all different, i guess that is to make things easy.. ;) Therefore i'll attach a png:partitioner,(cannot be copied) so you can see yourself how things are..
What does "root (hd0,5)" mean? You have a /boot partition? What is on /dev/hda6 or /dev/sda6?
they are the same thing... fstab: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 swap swap defaults 0 0 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 / ext3 defaults 1 1 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part10 /10.3 ext3 defaults 1 2 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part6 /boot ext2 defaults 1 2 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part12 /home ext3 defaults 1 2 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part8 /home10.3 ext3 acl,user_xattr 1 2 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part13 /spare ext3 acl,user_xattr 1 2 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part7 /tmp ext3 defaults 1 2 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part1 /windows/C ntfs-3g defaults,locale=nl_NL.UTF-8 0 0 /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part5 /windows/D ntfs-3g defaults,locale=nl_NL.UTF-8 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 /dev/sda1 /media/cfdisk auto user,noauto,users,gid=users,umask=0002,utf8=true 0 0 The strange entrance on the bottom is a cf disk that can't get mounted..;) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c49 --- Comment #49 from Robby Verberne <monkey9@iae.nl> 2009-03-06 02:26:30 MST --- Created an attachment (id=277585) --> (https://bugzilla.novell.com/attachment.cgi?id=277585) partitioner.png the partitioner gives a lot of trouble since it has been changed. It is not fully debugged yet..;) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c50 --- Comment #50 from Kay Sievers <kasievers@novell.com> 2009-03-06 03:02:10 MST --- (In reply to comment #48)
oddball@AMD64x2-sfn1:~> mountpoint -d / 3:75
That is hdb11, so -part11 for / should be right.
I do have a boot partition yes.
Ok, still no idea why you get hdb on the system, and the bootloader uses hda(hd0), but that may all go away, if you can successfully switch to libata drivers.
What is confusing is that the names used by grub, fstab and partioner are all different, i guess that is to make things easy.. ;)
That's because of the broken beta, which installed IDE drivers. The partitioner just shows the current kernel names. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c51 --- Comment #51 from Robby Verberne <monkey9@iae.nl> 2009-03-06 03:37:27 MST ---
Ok, still no idea why you get hdb on the system, and the bootloader uses hda(hd0), but that may all go away, if you can successfully switch to libata drivers.
Which should happen when i get rid of:"amd74xx" and "ide_pci_generic"? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User kasievers@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c52 --- Comment #52 from Kay Sievers <kasievers@novell.com> 2009-03-06 03:47:30 MST --- The libata driver should claim your disks, yes, and you will get /dev/sda* devices. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c53 --- Comment #53 from Robby Verberne <monkey9@iae.nl> 2009-03-06 05:12:25 MST --- I do not know if this is right: I took out both modules, as shown below in kernel, changed the menu.lst entrance, left fstab untouched, made initrd, and still i get this: modules are still in, hdb devices.. (i did not reboot yet..) should i log out of kde before mkinitrd? or what do i have to do so the changes get noticed? AMD64x2-sfn1:/home/oddball # mkinitrd Kernel image: /boot/vmlinuz-2.6.29-rc6-git1-2-default Initrd image: /boot/initrd-2.6.29-rc6-git1-2-default Root device: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part11 (/dev/hdb11) (mounted on / as ext3) Resume device: /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDEW7U8F-part9 (/dev/hdb9) Kernel Modules: hwmon thermal_sys processor thermal scsi_mod libata sata_nv pata_amd ata_generic fan jbd mbcache ext3 edd pata_acpi ide-core amd74xx ide-pci-generic ide-gd_mod usbcore ohci-hcd ehci-hcd uhci-hcd hid usbhid Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1152x864) 25757 blocks ## Path: System/Kernel ## Description: ## Type: string ## Command: /sbin/mkinitrd # # This variable contains the list of modules to be added to the initial # ramdisk by calling the script "mkinitrd" # (like drivers for scsi-controllers, for lvm or reiserfs) # INITRD_MODULES="processor thermal sata_nv pata_amd ata_generic fan jbd ext3 edd pata_acpi" ## Type: string ## Command: /sbin/mkinitrd -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c54 --- Comment #54 from Robby Verberne <monkey9@iae.nl> 2009-03-07 11:00:47 MST --- I updated factory yesterday, and i tried to reboot with the new settings: No boot. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=444492 User monkey9@iae.nl added comment https://bugzilla.novell.com/show_bug.cgi?id=444492#c55 Robby Verberne <monkey9@iae.nl> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |CLOSED Resolution| |WONTFIX --- Comment #55 from Robby Verberne <monkey9@iae.nl> 2009-03-09 09:56:29 MST --- repair options are not able to repair. There are 2 disk ids, for all partitons. Repair wanted to install the 2 modules i took out, but did not succeed. I upgraded my 10.3 install with the retail11.1 which left out the bootoption for 11.2 in the bootmenu. I'll try a net-install factory-upgrade, as soon as the install iso boots. I'll close this bug, as i do not want to spend any time on it no more, and nobody else has it. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com