https://bugzilla.novell.com/show_bug.cgi?id=445494 User sndirsch@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c2 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|sndirsch@novell.com |lverhaegen@novell.com Summary|No graphics after install with Radeon X1300 |radeonhd: No outputs detected (Radeon X1300) --- Comment #2 from Stefan Dirsch 2008-11-16 07:24:39 MST --- [...] (WW) RADEONHD(0): No outputs definitely connected, trying again... (II) RADEONHD(0): Output DVI-I_1/analog disconnected (II) RADEONHD(0): Output DVI-I_1/digital disconnected (II) RADEONHD(0): Output TV_SVIDEO disconnected (II) RADEONHD(0): Output VGA_1 disconnected (II) RADEONHD(0): Output DVI-D_2 disconnected (WW) RADEONHD(0): Unable to find initial modes (EE) RADEONHD(0): RandR: No valid modes. Disabling RandR support. (EE) RADEONHD(0): Failed to detect a connected monitor [...] -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|sndirsch@novell.com |lverhaegen@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User eich@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c4 --- Comment #4 from Egbert Eich 2008-11-17 05:08:05 MST --- Created an attachment (id=252605) --> (https://bugzilla.novell.com/attachment.cgi?id=252605) Extracted log file. VGA and DVI-I_2 share the same DDC line. Looks like this is really one DVI connector. Possibly the HPD lines are switched. Could you also try the line: Option "HPD" "swap" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User lverhaegen@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c7 Luc Verhaegen changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED --- Comment #7 from Luc Verhaegen 2008-11-20 10:21:19 MST --- Michael, i trust that there is a monitor attached. Can you build radeonhd from git source (you need xorg-x11-server-sdk installed for that) and you'll find rhd_conntest in the utils/ directory of that tree (you need pciutils-devel for that). Then you need to run rhd_conntest on the pci bus location of your card (which i think is 1:0.0). This tool then displays what it can find out about the connectors of your graphics card. This is the table that your graphics cards bios provides us with: Connector[0] {RHD_CONNECTOR_DVI, "DVI-I CRT1 DFP1", RHD_DDC_0, RHD_HPD_0, { RHD_OUTPUT_DACA, RHD_OUTPUT_TMDSA } } Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", RHD_DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } } Connector[2] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } } Connector[3] {RHD_CONNECTOR_DVI, "DVI-I DFP3", RHD_DDC_1, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } } Which probably does not match reality. We need to find out what of this needs to be adjusted. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User eich@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c9 --- Comment #9 from Egbert Eich 2008-11-21 04:57:09 MST --- (In reply to comment #5 from Michael McCarthy)

Option "HPD" "off" gives me a working X display. Option "HPD" "swap" and it is still broken.

OK, could you also supply a log for the working configuration? Connector[2] {RHD_CONNECTOR_VGA, "VGA CRT2", RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } } Connector[3] {RHD_CONNECTOR_DVI, "DVI-I DFP3", RHD_DDC_1, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } } I assume that this is really one DVI-I connector, not a separate VGA and DVI-D connector. This notion is supported by the fact that both share the same DDC ine. I looking into a heuristic to fix this on the other hand it may not be relevant at all here. I assume that HPD on this board is simply not wired up :( Please also provide the output of rhd_conntest. Please only have one connector on the card connected to a monitor at a time and provide outputs for both connectors. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User mmccarthy@lojack.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c10 --- Comment #10 from Michael McCarthy 2008-11-21 05:26:05 MST --- I will try and do the requests on Saturday. The card has seperate VGA and DVI-D connectors and the monitor is currently analog VGA. I will also try it with a DVI-D monitor attached and send the results. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User eich@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c12 --- Comment #12 from Egbert Eich 2008-11-24 14:34:29 MST --- Oops, overlooked the last comment. Michael, according to the connector table the card has: 1. one DVI-I (VGA and DVI combined) 2. one TVout 3. one DVI-D 4. one VGA connector I've never seen such a card. If the card has a separate VGA connector it usually has 3 connectors: DVI-I, TVout and VGA. You say, that your card has DVI-D (without analog VGA) and your monitor is presently connected to the VGA output. This contradicts what you say in comment #5, the the option "HPD" "off" gives you a working display. HPD is only present on DVI ports. Thus if you have a VGA monitor and this option really makes a difference your VGA monitor must be connected to DVI-I port thru a DVI2VGA dongle. Could you please provide us with a run of rhd_conntest for a monitor connected to VGA and - if possible - also to the DVI port (the digital and if available also the analog part)? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User mmccarthy@lojack.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c14 --- Comment #14 from Michael McCarthy 2008-11-25 18:26:32 MST --- Created an attachment (id=255503) --> (https://bugzilla.novell.com/attachment.cgi?id=255503) Logs with digital monitor attached These are the logs of the working configuration with a digitla monitor attached to the DVI connector. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User mmccarthy@lojack.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c16 --- Comment #16 from Michael McCarthy 2008-11-25 18:48:23 MST --- Created an attachment (id=255506) --> (https://bugzilla.novell.com/attachment.cgi?id=255506) Logs and config for radeon driver (non-hd) One more data point...These are the logs and config files for a working configuration with the analog monitor using the radeon (non-hd) driver. Created using the command "sax2 -r -m 0=radeon". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User eich@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c18 --- Comment #18 from Egbert Eich 2008-11-26 06:00:00 MST --- Created an attachment (id=255732) --> (https://bugzilla.novell.com/attachment.cgi?id=255732) Fix. Connector table override for this card. This patch assumes that the DVI connector is DVI-D only (no analog support). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User sndirsch@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c20 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|sndirsch@novell.com |eich@novell.com --- Comment #20 from Stefan Dirsch 2008-11-26 06:10:45 MST --- Why me? I no longer maintain the radeonhd package. :-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445494 User eich@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445494#c22 Egbert Eich changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED --- Comment #22 from Egbert Eich 2008-12-04 08:18:46 MST --- A driver with this patch in place has been submitted to http://download.opensuse.org/repositories/X11:/Drivers:/Video/openSUSE_Facto... Please test, if you still see issues please reopen. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.