http://bugzilla.novell.com/show_bug.cgi?id=529018
User Joachim.Reichelt@helmholtz-hzi.de added comment
http://bugzilla.novell.com/show_bug.cgi?id=529018#c8
Joachim Reichelt changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |ASSIGNED
Info Provider|Joachim.Reichelt@helmholtz- |
|hzi.de |
--- Comment #8 from Joachim Reichelt 2009-08-10 15:10:59 MDT ---
O.K.
I removed all w83627ehf related stuff from /etc/...
and now sensors gives good results.
But now my CPU goes straight to 55 deg without any load.
And adding load it goes up. But the fan stays at ~1100rmp.
So how to setup fancontrol?
(But that shoud be another bugreport)
So how to make shure, not to load the ACPI module and the nativ HW driver?
Couse that was the reason for the failure.
Now I have:
# lsmod
Module Size Used by
nls_utf8 1888 0
xt_tcpudp 3168 1
xt_pkttype 1696 3
ipt_LOG 6308 8
xt_limit 2660 8
snd_pcm_oss 51456 0
snd_mixer_oss 18464 1 snd_pcm_oss
snd_seq 64656 0
af_packet 23648 0
microcode 17548 0
xt_NOTRACK 1664 2
ipt_REJECT 3200 3
xt_state 2240 4
iptable_raw 2880 1
iptable_filter 3648 1
nf_conntrack_netbios_ns 2464 0
nf_conntrack_ipv4 11720 4
nf_conntrack 84476 4
xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4 2112 1 nf_conntrack_ipv4
ip_tables 13520 2 iptable_raw,iptable_filter
ip6_tables 14960 0
x_tables 19140 9
xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables,ip6_tables
nls_iso8859_1 4032 2
nls_cp437 5696 2
vfat 12576 2
fat 59072 1 vfat
fuse 75356 11
loop 17164 0
dm_mod 84036 0
arc4 1984 2
ecb 3296 2
snd_usb_audio 95552 2
snd_usb_lib 21504 1 snd_usb_audio
snd_rawmidi 26400 1 snd_usb_lib
snd_seq_device 8588 2 snd_seq,snd_rawmidi
snd_hda_codec_realtek 231172 1
snd_hda_intel 31136 4
snd_hda_codec 94496 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 8612 2 snd_usb_audio,snd_hda_codec
snd_pcm 97444 4
snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
rtl8187 54468 0
snd_timer 26760 2 snd_seq,snd_pcm
snd 74820 25
snd_pcm_oss,snd_mixer_oss,snd_seq,snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
mac80211 255720 1 rtl8187
led_class 4836 1 rtl8187
eeprom_93cx6 2176 1 rtl8187
ohci1394 32784 0
iTCO_wdt 12484 0
mag_quickcam_messenger 104808 0
iTCO_vendor_support 3908 1 iTCO_wdt
soundcore 8480 1 snd
cfg80211 103488 2 rtl8187,mac80211
rfkill 22580 1 cfg80211
gspca_stv06xx 29000 0
usbhid 51520 0
hid 46816 1 usbhid
usb_storage 57056 1
gspca_main 26304 1 gspca_stv06xx
videodev 39104 2 mag_quickcam_messenger,gspca_main
v4l1_compat 15876 1 videodev
asus_atk0110 13760 0
ieee1394 101956 1 ohci1394
snd_page_alloc 10248 2 snd_hda_intel,snd_pcm
pcspkr 2816 0
i2c_i801 12820 0
sr_mod 17348 0
cdrom 40480 1 sr_mod
sg 32500 0
floppy 61252 0
button 6576 0
nvidia 8952932 26
sky2 52452 0
i2c_core 32212 3 videodev,i2c_i801,nvidia
i82975x_edac 4740 0
edac_core 49236 1 i82975x_edac
rtc_cmos 14860 0
rtc_core 22684 1 rtc_cmos
rtc_lib 3200 1 rtc_core
uhci_hcd 29104 0
ehci_hcd 56272 0
pata_acpi 4672 0
edd 10472 0
fan 5060 0
processor 49584 0
ide_pci_generic 4068 0
piix 6792 0
ide_core 122412 2 ide_pci_generic,piix
sym53c8xx 83928 0
scsi_transport_spi 27456 1 sym53c8xx
ata_generic 4900 0
pata_jmicron 3232 3
ata_piix 25188 5
ahci 37520 0
libata 198412 5
pata_acpi,ata_generic,pata_jmicron,ata_piix,ahci
thermal 21052 0
thermal_sys 18056 3 fan,processor,thermal
hwmon 3708 2 asus_atk0110,thermal_sys
Now I can:
# modprobe w83627ehf
# sensors
with success and "good" results!
And here is the reason for the lock:
Now I started fancontrol (using w83627ehf!!!)
Now I have to wait till fancontrol gives me access to the fan etc.
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.