https://bugzilla.novell.com/show_bug.cgi?id=205331 mt@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Component|Installation |Kernel ------- Comment #6 from mt@novell.com 2006-09-18 05:59 MST ------- The kernel is unable to detect the IDE hardware... See boot.msg file in comment #1 (osuse10.2a4): <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [...] <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <5>SCSI subsystem initialized <6>st: Version 20050830, fixed bufsize 32768, s/g segs 256 <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <6>Non-volatile memory driver v1.2 <6>NET: Registered protocol family 17 <6>loop: loaded (max 8 devices) <6>powernow: This module only works with AMD K7 CPUs <7>libata version 2.00 loaded. <7>ahci 0000:00:1f.2: version 2.0 <4>ahci: probe of 0000:00:1f.2 failed with error -12 <7>ata_piix 0000:00:1f.2: version 2.00 <6>ata_piix 0000:00:1f.2: MAP [ XX XX XX XX ] <3>ata_piix 0000:00:1f.2: invalid MAP value 1 <4>PCI: Enabling device 0000:00:1f.2 (0000 -> 0001) <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 <6>scsi0 : ata_piix <6>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 <6>scsi1 : ata_piix <4>ATA: abnormal status 0x7F on port 0x177 and compare with dmesg.txt from comment #2 (knopix): PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 [...] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: SAMSUNG MP0804H, ATA DISK drive hdb: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive ide1: I/O resource 0x170-0x177 not free. ide1: ports already in use, skipping probe ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. ahci 0000:00:1f.2: version 1.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 16 ACPI: PCI interrupt for device 0000:00:1f.2 disabled ahci: probe of 0000:00:1f.2 failed with error -12 ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: MAP [ XX XX XX XX ] ata_piix 0000:00:1f.2: invalid MAP value 1 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 16 ata: 0x1f0 IDE port busy PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 ata1: SATA port has no device. scsi0 : ata_piix -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.