https://bugzilla.novell.com/show_bug.cgi?id=210988 ------- Comment #29 from lauffer@ph-freiburg.de 2007-01-11 06:08 MST ------- Ok, back on bug 21098 with a dedicated test machine (same hardware as before). You can get full root access if you like... Here the test results for Egbert (see #24) in short, the complete lscpi logs will be send in some mimutes. I really wonder why the old test I did in #13 and #15 (with the test rpm xorg-x11-server-6.9.0-50.24.i586.rpm in #11 from stefan) did NOT crash while not i crashes the host! I made these teste with several xorg-x11 SL-10.1 packes: -------------------------------------------------------- 1. Boot in runlevel 3 2. lspci -v > <file...>-0 3. X -verbose 1 4. lspci -v > <file...>-1 5. kill the X from 3. 6. lspci -v <file...>-2 I made these test above (as far as possible) with the following SL-10.1 xorg installations: a) xorg in the installation from the first/final SL-10.1 ftp release b) ...with the xorg-x11-driver-video update with patch level 46.15 c) ...with the xorg-x11-driver-video update with patch level 46.20 d) ...with the xorg update packages patch level 50.17 -> Important note: This was the last working X installation! After starting (and killing) X the ethernet card becomes "unusable"! e) ...with... 50.20 f) ...with... 50.24 g) ...with... stefans patched xorg-x11-server 50.24 from #11 In all the tests a..g the "interuptmopde" in the bios was "APIC". So I started some more tests with the "PIC" mode. But there it wasn't something other than in the apic mode. Ok... wait some minutes, I'll upload a tgz with the lspci outputs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.