![](https://seccdn.libravatar.org/avatar/3035b38ff33cf86f480bb169b8500b80.jpg?s=120&d=mm&r=g)
https://bugzilla.novell.com/show_bug.cgi?id=219769 Summary: YaST isn't able to handle sscsi devices on em64t on installation Product: openSUSE 10.2 Version: Beta 2 Platform: 64bit OS/Version: Other Status: NEW Severity: Blocker Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: tarnold@novell.com QAContact: jsrain@novell.com This bug appears on two HP ProLiant (zert35.suse.de / zert45.suse.de) Machine Specs: Label : Proliant DL360G4 (1HE Rackserver) S/N : Mainboard : HP proprietary Proliant DL360G4 Chipset : Intel E7520 BIOS : ProLiant System BIOS - P54 (06/01/2005) Processor(s) : 2x (4x log.) Intel Xeon 3.60 GHz/800 MHz(2 Mbyte L2) EM64T RAM : 2x 1GB PC2700 DDR ECC CL2,5 Reg. DIMMs = 2 GByte Graphics : (onboard) ATI Rage XL, 8192 kByte SGRAM Ethernet NIC : (onboard) 2x HP NC7782 (Broadcom NetXtreme BCM5704) Gigabit IDE Controller : (onboard) Intel 6300ESB Ultra ATA Storage Controller CD-ROM Lw : 1x COMPAQ CRN-8245B, ATAPI CD-ROM drive RAID : 1x SmartArray P600 SAS-to-RAID (256MB) RAID BIOS : Firmware v1.18 HDDs : 1x Hotplug HP DG036A8B53, SAS, 36 GByte 2.5" am P600 Floppy-Lw : (none) Bus-Slots : CHECK: 2x PCI-X 64Bit/100+MHz PowerSupply : CHECK: 1x HotSwap HP DPS-460BB B, max. 460W During installation an error message occurs that says: "parted isn't able to handle device /dev/XXXX". In the partitioner module of yast you can see the device, but without any information out of the partition table and it is not possible to create or edit any partiton. Performing fdisk or parted on a console properly works, so it must be a bug in YaST. I'll add /var/log/YaST2 as an attachement. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.