https://bugzilla.novell.com/show_bug.cgi?id=205630 joachim.deguara@amd.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|conke.hu@gmail.com | ------- Comment #7 from joachim.deguara@amd.com 2006-10-11 05:07 MST ------- I tested this with acpi=off or noapic but neither helped. Ran the 2.6.19-rc1-mm1 kernel and the SATA disk and DVD drive appeared. So it appears that this problem is fixed in the -mm branch. I was a little shocked to see the SATA drives are now seen as IDE. libata version 2.00 loaded. ATI SB600 SATA Legacy IDE: IDE controller at PCI slot 0000:00:12.0 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 ATI SB600 SATA Legacy IDE: chipset revision 0 ATI SB600 SATA Legacy IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST3808110AS, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 Probing IDE interface ide1... hdc: LITE-ON CD-ROM LTN-48S1S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ATIIXP: chipset revision 0 ATIIXP: 100% native mode on irq 16 ide2: BM-DMA at 0x2020-0x2027, BIOS settings: hde:pio, hdf:pio ATIIXP: simplex device: DMA disabled ide3: ATIIXP Bus-Master DMA disabled (BIOS) Probing IDE interface ide2... Probing IDE interface ide3... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.