[Bug 205630] New: suse fails to install on ATI SB600 shipset
https://bugzilla.novell.com/show_bug.cgi?id=205630 Summary: suse fails to install on ATI SB600 shipset Product: SUSE Linux 10.1 Version: Final Platform: All OS/Version: SuSE Linux 10.1 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: conke.hu@gmail.com QAContact: qa@suse.de installer cannot find SATA HDDs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |conke.hu@gmail.com ------- Comment #1 from gregkh@novell.com 2006-10-03 00:53 MST ------- We're going to need a bit more information than this... hwinfo output? What kind of SATA controller? Does the 10.2 alphas work? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 joachim.deguara@amd.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |joachim.deguara@amd.com ------- Comment #2 from joachim.deguara@amd.com 2006-10-10 04:56 MST ------- I can confirm this, also with a SB600 chipset and test openSUSE 10.2 apha 5. ata1: SATA max UDMA/133 cmd 0xFFFFC2000000E100 ctl 0x0 bmdma 0x0 irq 185 ata2: SATA max UDMA/133 cmd 0xFFFFC2000000E180 ctl 0x0 bmdma 0x0 irq 185 ata3: SATA max UDMA/133 cmd 0xFFFFC2000000E200 ctl 0x0 bmdma 0x0 irq 185 ata4: SATA max UDMA/133 cmd 0xFFFFC2000000E280 ctl 0x0 bmdma 0x0 irq 185 scsi0 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) scsi1 : ahci ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: qc timeout (cmd 0xa1) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #3 from joachim.deguara@amd.com 2006-10-10 05:19 MST ------- It appears that there are no interruptss being generated from that device. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #4 from joachim.deguara@amd.com 2006-10-10 06:18 MST ------- Created an attachment (id=101114) --> (https://bugzilla.novell.com/attachment.cgi?id=101114&action=view) boot.msg note there is an invalid IRQ for pci device 00:01 PCI bridge: ATI Technologies Inc RS480 PCI Bridge and of course there are the ata problems. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 lmb@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #101114|application/octet-stream |text/plain mime type| | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #5 from lmb@novell.com 2006-10-10 07:11 MST ------- Can you please try and run http://www.linuxfirmwarekit.org/ so we can rule out BIOS/ACPI issues? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #6 from joachim.deguara@amd.com 2006-10-10 07:14 MST ------- I ran that but I was not able to store the results on the USB stick as it would not detect my usb key (though I could mount it with the opensuse install image). The major fail result of that was the invalid IRQ other than small things like not cpufreq. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 joachim.deguara@amd.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|conke.hu@gmail.com | ------- Comment #7 from joachim.deguara@amd.com 2006-10-11 05:07 MST ------- I tested this with acpi=off or noapic but neither helped. Ran the 2.6.19-rc1-mm1 kernel and the SATA disk and DVD drive appeared. So it appears that this problem is fixed in the -mm branch. I was a little shocked to see the SATA drives are now seen as IDE. libata version 2.00 loaded. ATI SB600 SATA Legacy IDE: IDE controller at PCI slot 0000:00:12.0 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 ATI SB600 SATA Legacy IDE: chipset revision 0 ATI SB600 SATA Legacy IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST3808110AS, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 Probing IDE interface ide1... hdc: LITE-ON CD-ROM LTN-48S1S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ATIIXP: chipset revision 0 ATIIXP: 100% native mode on irq 16 ide2: BM-DMA at 0x2020-0x2027, BIOS settings: hde:pio, hdf:pio ATIIXP: simplex device: DMA disabled ide3: ATIIXP Bus-Master DMA disabled (BIOS) Probing IDE interface ide2... Probing IDE interface ide3... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #8 from joachim.deguara@amd.com 2006-10-11 07:57 MST ------- applying these two patches [1][2] to the kotd x86_64 HEAD branch (this is 10.2 alpha right?) makes the SB600 SATA work in legacy mode and make the SATA drives appear. [1] support_sb600_sata_legacy_ide.patch http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdif... [2] ahci-ati-sb600-sata-support-for-various-modes.patch ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc1/2.6.19-rc1-mm1/broken-out/ahci-ati-sb600-sata-support-for-various-modes.patch -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #9 from joachim.deguara@amd.com 2006-10-11 07:57 MST ------- Created an attachment (id=101223) --> (https://bugzilla.novell.com/attachment.cgi?id=101223&action=view) support_sb600_sata_legacy_ide.patch -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #10 from joachim.deguara@amd.com 2006-10-11 07:58 MST ------- Created an attachment (id=101224) --> (https://bugzilla.novell.com/attachment.cgi?id=101224&action=view) ahci-ati-sb600-sata-support-for-various-modes.patch -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |joachim.deguara@amd.com ------- Comment #11 from gregkh@novell.com 2006-10-11 12:59 MST ------- Do we have a FATE entry to support this new device that is not currently supported in the 2.6.18 release? If not, we can't really add these patches. (the ata changes upstream after 2.6.18 are quite large, and cherry-picking from them might be dangerous to other parts of the system, as you can imagine.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 bodo.bauer@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Info Provider|joachim.deguara@amd.com |aj@novell.com ------- Comment #12 from bodo.bauer@novell.com 2006-10-12 03:58 MST ------- Assigning to Andreas, he has to make the decision -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #15 from joachim.deguara@amd.com 2006-10-13 02:13 MST ------- FYI, it looks like the SB600 is running the SATA in legacy IDE mode because the BIOS hast 'Emulation Mode' stuck on 'IDE' without one being able to change it. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 ------- Comment #16 from joachim.deguara@amd.com 2006-10-16 06:42 MST ------- Thanks to a BIOS update I am able to select 'Native Mode IDE' which allows the installer to see the hard drive. This works in SLES10 and opensuse 10.2 alpha5. So this is probably what this BIOS should have as default but doesn't. Perhaps the original reporter, Conke Hu, could check their BIOS also. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630 lmb@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED Info Provider|bodo.bauer@novell.com | Resolution| |WONTFIX ------- Comment #17 from lmb@novell.com 2006-10-24 03:14 MST ------- Resolving as per comment #16. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=205630#c18
Rodney Crossman
participants (1)
-
bugzilla_noreply＠novell.com