https://bugzilla.novell.com/show_bug.cgi?id=365534
User lahmbi5675@gmx.de added comment
https://bugzilla.novell.com/show_bug.cgi?id=365534#c12
--- Comment #12 from Ernst Kipfmüller 2008-03-22 22:26:04 MST ---
Oh, now I see what you mean. I typed the following in "" at the grub Boot
Options line:
Boot Options "options=libata=ignore_hpa=0"
Now the drive is actually found:
<7>libata version 3.00 loaded.
<7>pata_sis 0000:00:02.5: version 0.5.2
<6>scsi0 : pata_sis
<6>scsi1 : pata_sis
<6>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq
14
<6>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq
15
<4>ata1.00: failed to read native max address (err_mask=0x1)
<4>ata1.00: HPA support seems broken, will skip HPA handling
<6>ata1.00: ATA-4: WDC AC28400R, 17.01J17, max UDMA/66
<6>ata1.00: 16514064 sectors, multi 16: LBA
<6>ata1.01: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
<4>ata1.00: limited to UDMA/33 due to 40-wire cable
<6>ata1.00: configured for UDMA/33
<6>ata1.01: configured for UDMA/33
<6>ata2.00: ATA-7: ST3160812A, 2AAA, max UDMA/100
<6>ata2.00: 312581808 sectors, multi 16: LBA48
<6>ata2.01: ATAPI: IOMEGA ZIP 100 ATAPI Floppy, 14.A, max PIO2,
CDB intr
<4>ata2.00: limited to UDMA/33 due to 40-wire cable
<6>ata2.00: configured for UDMA/33
<6>ata2.01: configured for PIO2
<5>scsi 0:0:0:0: Direct-Access ATA WDC AC28400R 17.0 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 16514064 512-byte hardware sectors (8455 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<5>sd 0:0:0:0: [sda] 16514064 512-byte hardware sectors (8455 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>scsi 0:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
<4>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:1:0: Attached scsi CD-ROM sr0
<5>sr 0:0:1:0: Attached scsi generic sg1 type 5
<5>scsi 1:0:0:0: Direct-Access ATA ST3160812A 2AAA PQ: 0 ANSI: 5
<5>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<5>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<6> sdb: sdb1 sdb2 sdb3
<5>sd 1:0:0:0: [sdb] Attached SCSI disk
<5>sd 1:0:0:0: Attached scsi generic sg2 type 0
<5>scsi 1:0:1:0: Direct-Access IOMEGA ZIP 100 14.A PQ: 0 ANSI: 5
<5>sd 1:0:1:0: [sdc] Attached SCSI removable disk
<5>sd 1:0:1:0: Attached scsi generic sg3 type 0
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.