https://bugzilla.novell.com/show_bug.cgi?id=358030 User jw@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=358030#c1 Summary: lenovo X60s does not activate printer port on usb- docking station Product: openSUSE 10.3 Version: Final Platform: x86 OS/Version: openSUSE 10.3 Status: NEW Severity: Minor Priority: P5 - None Component: Mobile Devices AssignedTo: seife@novell.com ReportedBy: jw@novell.com QAContact: qa@suse.de CC: behlert@novell.com Blocks: 357354 Found By: --- I have an usb 2.0-hi speed docking station S124, power connected. then plugged into an usb port of the laptop. yast comes up asks me to confgure the network and a printer. I have no printer attached, so I just wait for the database to rebuild and click finish. afterwards, /dev/parport0 is gone. Reboot. parport of the main dockingstation is now parport1. /dev/usblp0 is now present, but defunct: pen("/dev/usblp0", O_RDWR) = 3 ioctl(3, PPCLAIM, 0xb7ebb140) = -1 ENOTTY (Inappropriate ioctl for device) reboot with both main and usb docking station attached. renumbers the main parport back to parport0. nothing else appears. disconnect, reconnect usb dockingstation # dmesg usb0: unregister 'plusb' usb-0000:00:1d.7-1.2.4, Prolific PL-2301/PL-2302 usb 5-1: new high speed USB device using ehci_hcd and address 12 usb 5-1: new device found, idVendor=0409, idProduct=0058 usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB2.0 Hub Controller usb 5-1: Manufacturer: NEC Corporation usb 5-1: configuration #1 chosen from 1 choice hub 5-1:1.0: USB hub found hub 5-1:1.0: 4 ports detected usb 5-1.1: new high speed USB device using ehci_hcd and address 13 usb 5-1.1: new device found, idVendor=1631, idProduct=6200 usb 5-1.1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1.1: Product: gwusb2e usb 5-1.1: Manufacturer: goodway corp usb usb 5-1.1: SerialNumber: 01 usb 5-1.1: configuration #1 chosen from 1 choice eth2: register 'asix' at usb-0000:00:1d.7-1.1, ASIX AX8817x USB 2.0 Ethernet, 00:50:5b:01:5d:d8 eth2: link down ADDRCONF(NETDEV_UP): eth2: link is not ready usb 5-1.2: new full speed USB device using ehci_hcd and address 14 usb 5-1.2: new device found, idVendor=05e3, idProduct=0604 usb 5-1.2: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 5-1.2: Product: USB Hub usb 5-1.2: configuration #1 chosen from 1 choice hub 5-1.2:1.0: USB hub found hub 5-1.2:1.0: 4 ports detected usb 5-1.2.1: new full speed USB device using ehci_hcd and address 15 usb 5-1.2.1: new device found, idVendor=067b, idProduct=2305 usb 5-1.2.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1.2.1: Product: IEEE-1284 Controller usb 5-1.2.1: Manufacturer: Prolific Technology Inc. usb 5-1.2.1: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 15 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 usb 5-1.2.2: new low speed USB device using ehci_hcd and address 16 usb 5-1.2.2: new device found, idVendor=0d3d, idProduct=0001 usb 5-1.2.2: new device strings: Mfr=0, Product=2, SerialNumber=0 usb 5-1.2.2: Product: USBPS2 usb 5-1.2.2: configuration #1 chosen from 1 choice input: USBPS2 as /class/input/input9 input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.7-1.2.2 input: USBPS2 as /class/input/input10 input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.7-1.2.2 usb 5-1.2.3: new full speed USB device using ehci_hcd and address 17 usb 5-1.2.3: new device found, idVendor=067b, idProduct=2303 usb 5-1.2.3: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 5-1.2.3: configuration #1 chosen from 1 choice pl2303 5-1.2.3:1.0: pl2303 converter detected usb 5-1.2.3: pl2303 converter now attached to ttyUSB0 usb 5-1.2.4: new full speed USB device using ehci_hcd and address 18 usb 5-1.2.4: new device found, idVendor=067b, idProduct=0000 usb 5-1.2.4: new device strings: Mfr=1, Product=0, SerialNumber=0 usb 5-1.2.4: Manufacturer: Prolific Technology Inc. usb 5-1.2.4: configuration #1 chosen from 1 choice usb0: register 'plusb' at usb-0000:00:1d.7-1.2.4, Prolific PL-2301/PL-2302, 1a:56:3f:a8:d9:7d ppdev0: registered pardevice ppdev0: unregistered pardevice # rmmod usblp disconnect, reconnect usb cable does not help. (screen /dev/ttyUSB0 38400 works as expected, serial line of the usb-docking station is good) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.