https://bugzilla.novell.com/show_bug.cgi?id=208782
------- Comment #9 from kern@sibbald.com 2006-09-29 09:31 MST -------
Good news: the kernel 2.6.18-rc5-git6-2-bigsmp taken from your 10.2 iso does
not have the bug. My only concern is the following (the ata1 and ata2 lines)
from the 2.6.18-rc5-git6-2-bigsmp boot messages (I included a few extra lines
before and after ...):
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 234375000 sectors (120000 MB)
native capacity is 234441648 sectors (120034 MB)
hda: Host Protected Area disabled.
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
Probing IDE interface ide1...
hdc: HL-DT-ST GCE-8483B, ATAPI CD/DVD-ROM drive
hdd: PHILIPS DVD+/-RW DVD8631, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 169
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 169
scsi0 : ata_piix
ata1: port is slow to respond, please be patient
ata1: port failed to respond (30 secs)
ata1: SRST failed (status 0xFF)
ata1: SRST failed (err_mask=0x100)
ata1: softreset failed, retrying in 5 secs
ata1: SRST failed (status 0xFF)
ata1: SRST failed (err_mask=0x100)
ata1: softreset failed, retrying in 5 secs
ata1: SRST failed (status 0xFF)
ata1: SRST failed (err_mask=0x100)
ata1: reset failed, giving up
scsi1 : ata_piix
ata2: port is slow to respond, please be patient
ata2: port failed to respond (30 secs)
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: softreset failed, retrying in 5 secs
ata2: SRST failed (status 0xFF)
ata2: SRST failed (err_mask=0x100)
ata2: reset failed, giving up
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 177
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0