https://bugzilla.novell.com/show_bug.cgi?id=228806 ------- Comment #7 from martin.ament@gmx.de 2007-01-07 07:02 MST ------- Hi, I think there is a problem with the Yastmodul for configuring grub. I have Opensuse 10.2 and Windows XP (Second master, second partition) If I configure with the Yastmodul the Config works for Linux. But if i boot one time into windows. The bootloader isn't working anymore from the mbr. If i use a disk for booting everything works fine. My Partitions: ---- /dev/hdc2 7,9G 3,8G 3,7G 51% / udev 506M 144K 506M 1% /dev /dev/hdc3 13G 3,6G 8,7G 29% /home /dev/hdd1 21G 16G 4,6G 78% /mnt/hdd1 /dev/hdc5 2,0G 65M 1,9G 4% /mnt/lin1 /dev/hdc6 2,0G 65M 1,9G 4% /mnt/lin2 /dev/sda2 149G 109G 40G 73% /mnt/sda2 /dev/hdc7 13G 11G 1,3G 90% /usr/local /dev/hdd2 14G 12G 2,3G 85% /windows/C -- Default by Yast, but not working for a windows on second hd -- menu.lst title WindowsXP rootnoverify (hd0,0) makeactive chainloader (hd1,1)+1 ---- Modified like described in Grubdocu, working, but only one time --- menu.lst title WindowsXP rootnoverify (hd0,0) map (hd0) (hd1) map (hd1) (hd0) makeactive chainloader (hd1,1)+1 ---- I checked this, and i changed the entry for root and chainloader and now everything is working fine. -- menu.lst title WindowsXP rootnoverify (hd1,1) -- Windows root map (hd0) (hd1) map (hd1) (hd0) makeactive chainloader +1 -- NO hd information ---- I think the problem is, that the yastmodul assumes windows being on the first partition of the first hd, even if i changed the hd to /dev/hdd2 Is it possible to change the modul so it a) make the right entry for the root-Part? (hd1,1) in my case b) checking if the first hd is used, if that is not the case adding the map entries? Thanks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.