https://bugzilla.novell.com/show_bug.cgi?id=220286 ------- Comment #7 from wolfgang.kropff@web.de 2006-11-22 12:36 MST ------- After loading the 'ahci'-module the installation started and the first part was successfull. The reboot of the system ends with the following messages: "... Loading ahci ahci 0000:00:12.0 AHCI 0001.0100 32 slots4 ports 3Gbps 0xf impl IDE mode ahci 0000:00:12.0 flags: 64bit ncq ilck pm led clo pmp pio slumport ata1: SATA max UDMA/133 cmd 0xFFFFC200001C100 C+1 0x0 bmdma 0x0 irq 177 ata2: SATA max UDMA/133 cmd 0xFFFFC200001C180 C+1 0x0 bmdma 0x0 irq 177 ata3: SATA max UDMA/133 cmd 0xFFFFC200001C200 C+1 0x0 bmdma 0x0 irq 177 ata4: SATA max UDMA/133 cmd 0xFFFFC200001C280 C+1 0x0 bmdma 0x0 irq 177 scsi: ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7 max, UDMA/133, 48839718 sectors: LBAU8 NCQ (depth 31/32) ata1.00: ata1: dev0 multi count 16 ata1.00: configued for UDMA/133 . . . scsi3: ahci ata4: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: WDC WD 2500JS055N Rev: 10.0 Type: direct access ANSISCSI: revision 05 SCSI device sda: 48839718 512-kbyte hdwr sectors (250059 MB) sda: Write Protect off . . . SCSI device sda: device cache: write back sda: sda1 sda2 .... sd 0:0:0:0: Attached scsi disk sda . . . Loading ext3 resume device /dev/sdg7 not found (ignored) Waiting for device /dev/sdg8 to appear ................................. not found -- exiting to /bin/sh sh: no job control in this shell" The keyboard was inactive, so I can not attach any output of dmesg or hwinfo of the beta2. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.