https://bugzilla.novell.com/show_bug.cgi?id=365534
User lahmbi5675@gmx.de added comment
https://bugzilla.novell.com/show_bug.cgi?id=365534#c14
--- Comment #14 from Ernst Kipfmüller 2008-03-23 04:59:33 MST ---
Ok, now the drive was detected without any kernel parameter, there is still
some "failed to rad native max address" message, but that's probably ok. I'd
though prefer to use the sis5513 module for now, will any further tests be
necessary?
<5>Linux version 2.6.22.18-bug365534_dbg0-default (geeko@buildhost) (gcc
version 4.2.1 (SUSE Linux)) #1 SMP 2008-03-19 17:37:33 +0100
..
<7>libata version 3.00 loaded.
<7>pata_sis 0000:00:02.5: version 0.5.2
<6>scsi0 : pata_sis
<6>scsi1 : pata_sis
<6>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq
14
<6>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq
15
<4>ata1.00: failed to read native max address (err_mask=0x1)
<4>ata1.00: HPA support seems broken, skipping HPA handling
<6>ata1.00: ATA-4: WDC AC28400R, 17.01J17, max UDMA/66
<6>ata1.00: 16514064 sectors, multi 16: LBA
<6>ata1.01: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
<4>ata1.00: limited to UDMA/33 due to 40-wire cable
<6>ata1.00: configured for UDMA/33
<6>ata1.01: configured for UDMA/33
<6>ata2.00: ATA-7: ST3160812A, 2AAA, max UDMA/100
<6>ata2.00: 312581808 sectors, multi 16: LBA48
<6>ata2.01: ATAPI: IOMEGA ZIP 100 ATAPI Floppy, 14.A, max PIO2,
CDB intr
<4>ata2.00: limited to UDMA/33 due to 40-wire cable
<6>ata2.00: configured for UDMA/33
<6>ata2.01: configured for PIO2
<5>scsi 0:0:0:0: Direct-Access ATA WDC AC28400R 17.0 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 16514064 512-byte hardware sectors (8455 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<5>sd 0:0:0:0: [sda] 16514064 512-byte hardware sectors (8455 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>scsi 0:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
<4>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:1:0: Attached scsi CD-ROM sr0
<5>sr 0:0:1:0: Attached scsi generic sg1 type 5
<5>scsi 1:0:0:0: Direct-Access ATA ST3160812A 2AAA PQ: 0 ANSI: 5
<5>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<5>sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<6> sdb: sdb1 sdb2 sdb3
<5>sd 1:0:0:0: [sdb] Attached SCSI disk
<5>sd 1:0:0:0: Attached scsi generic sg2 type 0
<5>scsi 1:0:1:0: Direct-Access IOMEGA ZIP 100 14.A PQ: 0 ANSI: 5
<5>sd 1:0:1:0: [sdc] Attached SCSI removable disk
<5>sd 1:0:1:0: Attached scsi generic sg3 type 0
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.