http://bugzilla.opensuse.org/show_bug.cgi?id=975881 http://bugzilla.opensuse.org/show_bug.cgi?id=975881#c2 Jean-Claude Dole <jcdole@free.fr> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|INVALID |--- --- Comment #2 from Jean-Claude Dole <jcdole@free.fr> --- Hello. You don't view carrefully the attached files. They have nothing to do with iscan. They are relative to yast2. Concerning the disk full warning there is 60Gb free so I think it is sufficient. scanimage return this alert : "# scanimage -vvv -T scanimage: scanning image of size 1696x3743 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 5088 bytes... PASS scanimage: reading one byte... PASS scanimage: stepped read, 2 bytes... PASS scanimage: stepped read, 4 bytes... PASS scanimage: stepped read, 8 bytes... PASS scanimage: stepped read, 16 bytes... PASS scanimage: stepped read, 32 bytes... PASS scanimage: stepped read, 64 bytes... PASS scanimage: stepped read, 128 bytes... PASS scanimage: stepped read, 256 bytes... PASS scanimage: stepped read, 512 bytes... PASS scanimage: stepped read, 1024 bytes... PASS scanimage: stepped read, 2048 bytes... PASS scanimage: stepped read, 4096 bytes... PASS scanimage: stepped read, 8192 bytes... PASS scanimage: stepped read, 8191 bytes... PASS scanimage: stepped read, 4095 bytes... PASS scanimage: stepped read, 2047 bytes... PASS scanimage: stepped read, 1023 bytes... PASS scanimage: stepped read, 511 bytes... PASS scanimage: stepped read, 255 bytes... PASS scanimage: stepped read, 127 bytes... PASS scanimage: stepped read, 63 bytes... PASS scanimage: stepped read, 31 bytes... PASS scanimage: stepped read, 15 bytes... PASS scanimage: stepped read, 7 bytes... PASS scanimage: stepped read, 3 bytes... PASS Closing device libusb: warning [libusb_close] internal signalling read failed, closing anyway" ^Cscanimage: received signal 2 scanimage: trying to stop scanner ^Cscanimage: received signal 2 scanimage: aborting " and this : "# scanimage -vvv --format tiff > /tmp/scan2.tiff scanimage: scanning image of size 1696x3743 pixels at 24 bits/pixel scanimage: acquiring RGB frame scanimage: min/max graylevel value = 8/255 scanimage: read 19044384 bytes in total Closing device libusb: warning [libusb_close] internal signalling read failed, closing anyway ^Cscanimage: received signal 2 scanimage: trying to stop scanner ^Cscanimage: received signal 2 scanimage: aborting " And as said : "This scanner was working correctly 2 years ago on Opensuse 13.1." I am trying your recommendation by using traditional x86 32-bit software, and will give news asap. -- You are receiving this mail because: You are on the CC list for the bug.