Comment # 2 on bug 975881 from Jean-Claude Dole

Hello.
You don't view carrefully the attached files.
They have nothing to do with iscan.
They are relative to yast2.

Concerning the disk full warning there is 60Gb free so I think it is
sufficient.

scanimage return this alert :
"# scanimage -vvv -T
scanimage: scanning image of size 1696x3743 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 5088 bytes...  PASS
scanimage: reading one byte...          PASS
scanimage: stepped read, 2 bytes...     PASS
scanimage: stepped read, 4 bytes...     PASS
scanimage: stepped read, 8 bytes...     PASS
scanimage: stepped read, 16 bytes...    PASS
scanimage: stepped read, 32 bytes...    PASS
scanimage: stepped read, 64 bytes...    PASS
scanimage: stepped read, 128 bytes...   PASS
scanimage: stepped read, 256 bytes...   PASS
scanimage: stepped read, 512 bytes...   PASS
scanimage: stepped read, 1024 bytes...  PASS
scanimage: stepped read, 2048 bytes...  PASS
scanimage: stepped read, 4096 bytes...  PASS
scanimage: stepped read, 8192 bytes...  PASS
scanimage: stepped read, 8191 bytes...  PASS
scanimage: stepped read, 4095 bytes...  PASS
scanimage: stepped read, 2047 bytes...  PASS
scanimage: stepped read, 1023 bytes...  PASS
scanimage: stepped read, 511 bytes...   PASS
scanimage: stepped read, 255 bytes...   PASS
scanimage: stepped read, 127 bytes...   PASS
scanimage: stepped read, 63 bytes...    PASS
scanimage: stepped read, 31 bytes...    PASS
scanimage: stepped read, 15 bytes...    PASS
scanimage: stepped read, 7 bytes...     PASS
scanimage: stepped read, 3 bytes...     PASS
Closing device
libusb: warning [libusb_close] internal signalling read failed, closing anyway"
^Cscanimage: received signal 2
scanimage: trying to stop scanner                                               
^Cscanimage: received signal 2                                                  
scanimage: aborting                                                             
"

and this :
"# scanimage -vvv --format tiff > /tmp/scan2.tiff                               
scanimage: scanning image of size 1696x3743 pixels at 24 bits/pixel             
scanimage: acquiring RGB frame                                                  
scanimage: min/max graylevel value = 8/255
scanimage: read 19044384 bytes in total
Closing device
libusb: warning [libusb_close] internal signalling read failed, closing anyway
^Cscanimage: received signal 2
scanimage: trying to stop scanner
^Cscanimage: received signal 2
scanimage: aborting
"

And as said : "This scanner was working correctly 2 years ago on Opensuse
13.1."

I am trying your recommendation by using traditional x86 32-bit software, and
will give news asap.