http://bugzilla.opensuse.org/show_bug.cgi?id=1081446 Bug ID: 1081446 Summary: 10 minutes to load installer's initrd Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers@suse.de Reporter: mrmazda@earthlink.net QA Contact: jsrain@suse.com Found By: --- Blocker: --- Created attachment 760477 --> http://bugzilla.opensuse.org/attachment.cgi?id=760477&action=edit y2logs written early (before acknowledging license?) with TW This applies to both 20180214 and 20180215 TW and Leap 15.0 Build 129.1. I tried once with 15.0, >4 times with TW. It only happens (so far) on Intel e7600 (2 core 3.06Mhz) G31 host big31 (not reproducible on e6700 2 core 2.67MHz host Q965 gx745). To reproduce: 1-load installation kernel and initrd with Grub: kernel (hd0,0)/boot/stw/linux install=http://download.opensuse.org/tumbleweed/repo/oss hostname=big31 hostip=192.168.###.###/24 gateway=192.168.###.### nameserver=8.8.8.8 net.ifnames=0 kexec_reboot=0 ipv6.disable=1 initrd (hd0,0)/boot/stw/initrd Actual results: 1-kernel and initrd load in less than a minute Expected results: 1-kernel takes seconds to load 2-initrd takes ~10 minutes to load Note: 13.1, 13.2, 4.21, 4.22, 4.23, TW, Fedora & Debian are installed and boot normally. BIOS is set to enhanced (AHCI) mode. -- You are receiving this mail because: You are on the CC list for the bug.