https://bugzilla.novell.com/show_bug.cgi?id=393801
User casualprogrammer@yahoo.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=393801#c16
--- Comment #16 from Casual J. Programmer 2008-05-26 12:57:38 MDT ---
Interesting observation:
configured wlan0 for static IP=192.168.0.23, Mask=255.255.255.0
NetworkMonitor applet shows IP=192.168.0.30
# ifstatus wlan0
wlan0
wlan0 device: Intel Corporation PRO/Wireless 3945ABG Network Connection
(rev 02)
wlan0 is up
4: wlan0: mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:13:02:18:12:ac brd ff:ff:ff:ff:ff:ff
inet 192.168.0.30/24 brd 192.168.0.255 scope global wlan0
inet6 fe80::213:2ff:fe18:12ac/64 scope link
valid_lft forever preferred_lft forever
wlan0 IP address: 192.168.0.30/24
wlan0 wlan0
Configured routes for interface wlan0:
169.254.0.0 - 255.255.0.0 wlan0
Active routes for interface wlan0:
192.168.0.0/24 proto kernel scope link src 192.168.0.30
169.254.0.0/16 scope link
default via 192.168.0.1
1 of 1 configured routes for interface wlan0 up
wlan0 wlan0
prefer wpa_supplicant: no
wlan0 IEEE 802.11g ESSID:">manus manum lavat<"
Mode:Managed Frequency:2.422 GHz Access Point: 00:04:0E:A4:4F:A7
Bit Rate=54 Mb/s Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:9F92-C896-BAB2-D240-A56C-5D1B-8C1B-CF03 [2]
Link Quality=90/100 Signal level=-42 dBm Noise level=-82 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
wlan0 wlan0
question is, why isn't 192.168.0.23 used, but 192.168.0.30 ???
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.