http://bugzilla.novell.com/show_bug.cgi?id=596740
http://bugzilla.novell.com/show_bug.cgi?id=596740#c7
--- Comment #7 from Stefan Dirsch
Created an attachment (id=355685) --> (http://bugzilla.novell.com/attachment.cgi?id=355685) [details] Xorg log file when booted with nomodeset
Your monitor could not be detected. Thus 800x600 is selected as fallback. [ 43.669] (II) NV(0): I2C bus "DDC" initialized. [ 43.669] (II) NV(0): Probing for analog device on output A... [ 43.672] (--) NV(0): ...can't find one [ 43.672] (II) NV(0): Probing for analog device on output B... [ 43.674] (--) NV(0): ...found one [ 43.674] (II) NV(0): Probing for EDID on I2C bus A... [ 43.674] (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. [ 43.677] (II) NV(0): ... none found [ 43.677] (II) NV(0): Probing for EDID on I2C bus B... [ 43.680] (II) NV(0): ... none found [ 43.680] (--) NV(0): CRTC 0 appears to have a CRT attached [ 43.680] (II) NV(0): Using CRT on CRTC 0 [ 43.680] (--) NV(0): VideoRAM: 65536 kBytes [ 43.707] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) [ 43.707] (II) NV(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz [ 43.707] (II) NV(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz [...] 43.738] (**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz [ 43.738] (II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 43.738] (**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz [ 43.738] (II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 43.738] (**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.