https://bugzilla.novell.com/show_bug.cgi?id=346632
User alberto.passalacqua@tin.it added comment
https://bugzilla.novell.com/show_bug.cgi?id=346632#c3
Alberto Passalacqua changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|alberto.passalacqua@tin.it |
--- Comment #3 from Alberto Passalacqua 2007-12-07 12:55:35 MST ---
Hello Michal,
hwinfo --netcard gives:
29: PCI c00.0: 0282 WLAN controller
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_8086_4222
Unique ID: JNkJ.R_3Xvz9I_k9
Parent ID: qTvu.TkjeLK60Af8
SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0
SysFS BusID: 0000:0c:00.0
Hardware Class: network
Model: "Intel PRO/Wireless 3945ABG Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x4222 "PRO/Wireless 3945ABG Network Connection"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x1021
Revision: 0x02
Driver: "ipw3945"
Driver Modules: "ipw3945"
Device File: eth1
Features: WLAN
Memory Range: 0xf9fff000-0xf9ffffff (rw,non-prefetchable)
IRQ: 17 (19241 events)
HW Address: 00:1c:bf:32:c6:c8
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 34 36 38 40 42 44 46 48 52 56 60
64 100 104 108 112 116 120 124
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457
2.462 2.467 2.472 5.17 5.18 5.19 5.2 5.21 5.22 5.23 5.24 5.26 5.28 5.3 5.32 5.5
5.52 5.54 5.56 5.58 5.6 5.62
WLAN bitrates: 1 2 5.5 11 6 9 12 18 24 36 48 54
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v00008086d00004222sv00008086sd00001021bc02sc80i00"
Driver Info #0:
Driver Status: ipw3945 is active
Driver Activation Cmd: "modprobe ipw3945"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
30: PCI 900.0: 0200 Ethernet controller
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_14e4_1713
Unique ID: rBUF.rpgJzxSJjg5
Parent ID: HnsE.b2HeBu2fNjB
SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:09:00.0
SysFS BusID: 0000:09:00.0
Hardware Class: network
Model: "Dell NetLink BCM5906M Fast Ethernet PCI Express"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x1713 "NetLink BCM5906M Fast Ethernet PCI Express"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0209
Revision: 0x02
Driver: "tg3"
Driver Modules: "tg3"
Device File: eth0
Memory Range: 0xf9bf0000-0xf9bfffff (rw,non-prefetchable)
IRQ: 4345 (3 events)
HW Address: 00:15:c5:7f:89:7e
Link detected: no
Module Alias: "pci:v000014E4d00001713sv00001028sd00000209bc02sc00i00"
Driver Info #0:
Driver Status: tg3 is active
Driver Activation Cmd: "modprobe tg3"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
At the moment I have to give "modprobe ipw3945" manually to load the driver,
because it is not loaded automatically and I can't change the configuration
using YaST.
Regards,
Alberto
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.