- openSUSE Bugs

[Bug 201739] file conflicts between xpdf-tools and poppler-tools
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=201739 andreas.hanke(a)gmx-topmail.de changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|Major |Normal ------- Comment #13 from andreas.hanke(a)gmx-topmail.de 2006-10-09 13:09 MST ------- The file conflicts are now resolved except for xpdf-tools vs. poppler-tools, which is OK because these two must conflict by design. Remaining question: Last sentence of comment 3. (In reply to comment #7) > The strace then shows that pdftops now reads all the config files > from xpdf (The reason why it doesn't do this without "cp /etc/xpdfrc > ~/.xpdfrc" is that it only searches for /suse/mfabian/.xpdfrc and > /usr/etc/xpdfrc and the latter one doesn't exist. That's because poppler.spec does "./configure --prefix=/usr" which causes it to search xpdfrc in ${prefix}/etc. ${sysconfdir} defaults to ${prefix}/etc unless explicitly specified. If xpdfrc should be searched for in /etc, it has to be "./configure --prefix=/usr --sysconfdir=/etc". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 211146] New: glxinfo hangs with fglrx
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=211146 Summary: glxinfo hangs with fglrx Product: openSUSE 10.2 Version: Alpha 5 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X11 3rd Party AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: claes.backstrom(a)gmail.com QAContact: sndirsch(a)novell.com I use ati fglrx-8.29.6 built with ati-driver-installer-8.29.6.run --buildpkg SuSE/SUSE102-IA32 my problem is that glxinfo hangs all it says is: claes@alpha5:~> glxinfo name of display: :0.0 and then it just sits there. It's the same thing with fglrxinfo, glxgears, fgl_glxgears and so on. This means that when I try to enable compiz gnome-xgl-settings --enable-xgl When I try to log in with gdm it just sits there (as it tries to run glxinfo and a grep after GLX_....) If I kill the glxinfo process it starts metacity and I can work. But I want to use compiz. (it's so nice) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 2

[Bug 198125] fglrx driver does not support X.Org > 7.1 / Mesa > 6.4.2
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=198125 sndirsch(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |claes.backstrom(a)gmail.com ------- Comment #10 from sndirsch(a)novell.com 2006-10-09 12:59 MST ------- *** Bug 211146 has been marked as a duplicate of this bug. *** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 190205] firefox crashes in libeditor with typo3's rich text editor
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=190205 ------- Comment #38 from suse-beta(a)cboltz.de 2006-10-09 12:35 MST ------- Created an attachment (id=101044) --> (https://bugzilla.novell.com/attachment.cgi?id=101044&action=view) catchsegv firefox -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 190205] firefox crashes in libeditor with typo3's rich text editor
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=190205 suse-beta(a)cboltz.de changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |wolfgang(a)rosenauer.org ------- Comment #37 from suse-beta(a)cboltz.de 2006-10-09 12:34 MST ------- The newest YOU-package MozillaFirefox-1.5.0.7-1.5 changes the bahaviour: When switching to source view in Typo3's HTMLarea editor, Firefox crashes immediately, the xterm only shows /usr/bin/firefox: line 160: 11405 Speicherzugriffsfehler LD_PRELOAD=/usr/$LIB/libaoss.so${LD_PRELOAD:+:$LD_PRELOAD} $MOZ_PROGRAM $@ -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 193251] oops working with SCSI tape library
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=193251 ------- Comment #5 from sp(a)simcon-mt.com 2006-10-09 11:27 MST ------- (In reply to comment #4) > Oh, and please attach the script. I'm desperately looking for a testcase. > Sorry. I didn't test OpenSUSE 10.2, in our office vestion 10.1 is working well with a few changes. And it is not so easy now to test it. (to inseart SCSI cards, restart production computers, etc.) So below is a part of our backup script (perl). It is a big script and with specific for our enveroment things, sorry. I don't think you can use it for testing. In Internet 2 months ago, when I had this problem, I found it is a common problem of kernel 2.6.16 with SCSI tapes, so I've got 2.6.17 and it is working well now. Sorry again, Looks like I can not help more. ----------- ....... our($BackupProg); $BackupProg = "/bin/tar --verbose --create --file=/dev/nst0l --blocking-factor=128 --multi-volume"; our($BackupProgDebug); $BackupProgDebug = "/bin/tar --verbose --verbose --create --file=/dev/nst0l --blocking-factor=128 --multi-volume"; ...... # Get all dirs $Debug && print ("Debug: Get a list of not empty directories for daily backup!\n"); @TmpDailyBackupDirs = <$BackupDir/*_1>; # Dirs have to be in format: NAME_1 # But we need only directories and not empty ones. foreach my $dir (@TmpDailyBackupDirs) { if ( -d $dir ) { opendir(DIR, $dir) or die "ERROR: can't open directory \"$dir\" to read: $!\nAborting Backup!\n\n"; while ( defined($FileNameInDir = readdir(DIR)) ) { next if $FileNameInDir =~ /^\.\.?$/; # Skip . and .. push(@DailyBackupDirs , $dir); # Save this directory name ( it is a not empty dir ) last; } closedir(DIR); } } $Temp = $#DailyBackupDirs + 1; $Debug && print ("Debug: Performing Daily Backup ($WeekDay)!\n"); $Debug && print ("Debug: For $Temp not empty directories!\n"); print ("Loading a tape ...\n"); LOADING: # Load a tape $Debug && print "Command: $MTX load $LibElement\n"; $Return = system( "$MTX load $LibElement 1>$ToBackupTempFile 2>&1"); $exit_value = $Return >> 8; $signal_num = $Return & 127; $dumped_core = $Return & 128; if( $Return == 0 ) {} elsif ($exit_value == 1 ) { chomp($Temp = `$Cat $ToBackupTempFile`); unlink("$ToBackupTempFile"); if ( $Temp =~ /^source Element Address (\d+) is Empty/ ) { if ( $1 == $LibElement ) { print("ERROR: MTX command failed ($Temp) !\n Check the presens of a tape casset in slot: $LibElement.\n"); print(" To see a status use a commant: mtx status \n"); if( $UsingSpareTape == 0 && $SpareSlot != 0 ) { print("WARNING: Trying to load a spare tape: $SpareSlot.\n"); &SendMail_SpareUsing($LibElement); # Send a mail with notification: $LibElement is empty $UsingSpareTape = 1; $LibElement = $SpareSlot; # will use a spare tape goto LOADING; } print("\n Aborting backup!\n"); return 1; } else { print "\n===================================================="; print "WARNING: Unexpected error message from the tape labrary\n"; print "WARNING: '$Temp'\n"; print "WARNING: but we are trying to use the tape slot number $LibElement.\n"; print "WARNING: We will try to continue ....\n"; print "====================================================\n\n"; } } elsif ( $Temp =~ /^Drive 0 Full $Storage Element (\d+) loaded$/ ) { $LoadCnt++; if( $LoadCnt > $MaxLoadCnt ) { print("ERROR: Could not load a tape during 4 hours\.\n\n Aborting backup!\n"); return 1; } $Temp =~ s/^Drive 0 Full $Storage Element (\d+) loaded$/$1/; print("WARNING: Currently Tape $Temp is busy! Waiting 10 min to check it again...."); sleep(600); # 10 min. sleep print("\n"); goto LOADING; } else { print("ERROR: MTX command failed (Check correctness of device: /dev/changer ) !\n\n Aborting backup!\n"); return 1; } } elsif ($exit_value > 1) { print("ERROR: MTX ran with non-zero exit status $Return\n\n Aborting backup!\n"); exit 1; } elsif ($signal_num ) { print("ERROR: MTX was interrupted by signal $signal_num\n\n Aborting backup!\n"); return 1; } # OK (== tape is loaded) $TapeLoaded = 1; # Set Flag (to unload a tape later) # Check correctness of tape devices initialization. sleep(20); # Wait a little, while a tape will ready for( ; $WaitReady > 0 ; $WaitReady-- ) { print ("Get a tapeinfo ...\n"); $Debug && print "Command: $TAPEINFO -f /dev/scsitape\n"; $Return = system( "$TAPEINFO -f /dev/scsitape 1>$ToBackupTempFile 2>&1"); $exit_value = $Return >> 8; $signal_num = $Return & 127; $dumped_core = $Return & 128; if( $Return == 0 ) {} elsif ($exit_value == 1 ) { print("ERROR: TAPEINFO command failed (Check correctness of device: /dev/scsitape ) !\n\n Aborting backup!\n"); return 1; } elsif ($exit_value > 1) { print("ERROR: TAPEINFO ran with non-zero exit status $Return\n\n Aborting backup!\n"); return 1; } elsif ($signal_num ) { print("ERROR: TAPEINFO was interrupted by signal $signal_num\n\n Aborting backup!\n"); return 1; } chomp($Temp = `$Cat $ToBackupTempFile`); unlink("$ToBackupTempFile"); last if ( $Temp =~ /^Ready: yes/m ); # READY ! if( $WaitReady == 1 ) { print("ERROR: Tape is not ready for backup. Cannot wait longer.\n\n Aborting backup!\n"); return 1; } sleep(20); } # Init tape devices $Debug && print "Debug: Init tape devices.\n"; $Debug && print "Command: $STINIT -f /etc/stinit.def >/dev/null\n"; $Return = system( "$STINIT -f /etc/stinit.def >/dev/null"); $exit_value = $Return >> 8; $signal_num = $Return & 127; $dumped_core = $Return & 128; if( $Return == 0 ) {} elsif ($exit_value == 1 ) { print("ERROR: STINIT command failed (Check a configuration file: /etc/stinit.def ) !\n\nAborting backup!\n"); return 1; } elsif ($exit_value > 1) { print("ERROR: STINIT ran with non-zero exit status $Return\n\nAborting backup!\n"); return 1; } if( $Rewind ) { print ("Rewind a tape ...\n"); $Debug && print "Command: $SCSITAPE -f /dev/scsitape rewind\n"; $Return = system( "$SCSITAPE -f /dev/scsitape rewind"); $exit_value = $Return >> 8; $signal_num = $Return & 127; $dumped_core = $Return & 128; if( $Return == 0 ) {} elsif ($exit_value == 1 ) { print("ERROR: SCSITAPE command failed (Check correctness of device: /dev/scsitape ) !\n\nAborting backup!\n"); return 1; } elsif ($exit_value > 1) { print("ERROR: SCSITAPE ran with non-zero exit status $Return\n\nAborting backup!\n"); return 1; } elsif ($signal_num ) { print("ERROR: SCSITAPE was interrupted by signal $signal_num\n\nAborting backup!\n"); return 1; } } else { print ("Go to the end of tape ...\n"); $Debug && print "Command: $SCSITAPE -f /dev/scsitape eod\n"; sleep(1); $Return = system( "$SCSITAPE -f /dev/scsitape eod"); $exit_value = $Return >> 8; $signal_num = $Return & 127; $dumped_core = $Return & 128; if( $Return == 0 ) {} elsif ($exit_value == 1 ) { print("ERROR: SCSITAPE command failed (Check correctness of device: /dev/scsitape ) !\n\nAborting backup!\n"); return 1; } elsif ($exit_value > 1) { print("ERROR: SCSITAPE ran with non-zero exit status $Return\n\nAborting backup!\n"); return 1; } elsif ($signal_num ) { print("ERROR: SCSITAPE was interrupted by signal $signal_num\n\nAborting backup!\n"); return 1; } } # Making a backup to the tape for every found directory (as a new volume) foreach my $dir (@DailyBackupDirs) { # Get and store the start offset for a new volume. $Debug && print "Get Tape Offset at the beginning of a new volume backup\n"; $Debug && print "Command: $MT -f /dev/nst0l tell > $ToBackupTempFile\n"; $Return = 0xffff & system("$MT -f /dev/nst0l tell > $ToBackupTempFile"); if( $Return == 0 ) { chomp($Usage = `$Cat $ToBackupTempFile`); unlink("$ToBackupTempFile"); ($Usage) = ( $Usage =~ /^At block (\d+)\./ ); $Debug && print "Tape Usage=$Usage\n"; } elsif ($Return == 0xff00 ) { print("ERROR: $MT tell command failed!\n\nAborting backup!\n"); return 1; } elsif ($Return > 0x80) { $Return >>= 8; print("ERROR: $MT tell ran with non-zero exit status $Return\n\nAborting backup!\n"); return 1; } else { print "ERROR: $MT tell ran with"; if ($Return & 0x80){ $Return &= ~0x80; print "coredump from "; } print "signal $Return\n\nAborting backup!\n"; return 1; } $BackupOffset{$dir} = $Usage; $TapeUsage = $Usage; $Debug && print "Tape Offset now is: $Usage\n"; # Create a file volume string for current beckaup directoty $TapeLabel=basename($dir)."\.d".$BackupDay."\.".$WeekDay; $Debug && print ("Debug: Doing Backup of $dir !\n"); print("Creating Backup with VOLUME NAME = \"$TapeLabel\"\n"); print("Please, wait ...\n\n"); $Debug && print ("Goto directory: $dir !\n"); if( ! chdir($dir) ) { print("ERROR: Could not change directory to \"$dir\" !\n\nAborting backup!\n"); return 1; } $Debug && print "Command: $BackupProg --label=$TapeLabel \.\n"; $Return = system( "$BackupProg --label=$TapeLabel \. 1>>$BackupErrorFile 2>&1"); $exit_value = $Return >> 8; $signal_num = $Return & 127; $dumped_core = $Return & 128; if( $Return == 0 ) {} elsif ($exit_value == 1 ) { print("ERROR: Backup program failed (see error file: $BackupErrorFile) !\n\nAborting backup!\n"); return 1; } elsif ($exit_value > 1) { print("ERROR: TAR ran with non-zero exit status $exit_value\n"); `$Cat $BackupErrorFile`; print("ERROR: Aborting backup!\n"); return 1; } elsif ($signal_num ) { print("ERROR: TAR was interrupted by signal $signal_num\n\nAborting backup!\n"); return 1; } # We working as root, so I hope we will not have any error output here chomp($DirSize = `$Du -hs .`); $DirSize =~ s/^\s*(\S+).*$/$1/; $BackupDirSize{$dir} = $DirSize; print "<<Backup of $dir is done (dir. size: $DirSize).>>\n"; print "Clean directory: $dir.\n"; $Debug && print "Command: RM -rf *\n"; $Return = system( "$RM -rf * 1>>$BackupErrorFile 2>&1"); #$Return = system( "$RM -rf .* 1>>$BackupErrorFile 2>&1"); print "\n"; } $Debug && print "Debug: Get Tape Usage at the end of backup\n"; $Debug && print "Command: $MT -f /dev/nst0l tell > $ToBackupTempFile\n"; $Return = 0xffff & system("$MT -f /dev/nst0l tell > $ToBackupTempFile"); if( $Return == 0 ) { chomp($Usage = `$Cat $ToBackupTempFile`); unlink("$ToBackupTempFile"); ($Usage) = ( $Usage =~ /^At block (\d+)\./ ); $Debug && print "Tape Usage=$Usage\n"; } elsif ($Return == 0xff00 ) { print("ERROR: $MT tell command failed!\n\nAborting backup!\n"); return 1; } elsif ($Return > 0x80) { $Return >>= 8; print("ERROR: $MT tell ran with non-zero exit status $Return\n\nAborting backup!\n"); return 1; } else { print "ERROR: $MT -f /dev/nst0l tell ran with"; if ($Return & 0x80){ $Return &= ~0x80; print "coredump from "; } print "signal $Return\n\nAborting backup!\n"; return 1; } $TapeUsage = $Usage; # save current tape usage to report it later print ("Ejecting tape ...\n"); $Debug && print "Command: $SCSITAPE -f /dev/scsitape eject\n"; $Return = system( "$SCSITAPE -f /dev/scsitape eject"); $exit_value = $Return >> 8; $signal_num = $Return & 127; $dumped_core = $Return & 128; if( $Return == 0 ) {} elsif ($exit_value == 1 ) { print("ERROR: SCSITAPE command failed (Check correctness of device: /dev/scsitape )!\n\nAborting backup!\n"); return 1; } elsif ($exit_value > 1) { print("ERROR: SCSITAPE ran with non-zero exit status $Return\n\nAborting backup!\n"); return 1; } elsif ($signal_num ) { print("ERROR: SCSITAPE was interrupted by signal $signal_num\n\nAborting backup!\n"); return 1; } print ("UnLoading tape ...\n"); $Return = system( "$MTX unload $LibElement 1>$ToBackupTempFile 2>&1"); $exit_value = $Return >> 8; $signal_num = $Return & 127; $dumped_core = $Return & 128; if( $Return == 0 ) {} elsif ($exit_value == 1 ) { print("ERROR: MTX command failed (Check correctness of device name: /dev/changer ) !\n\nAborting backup!\n"); print("\nYOU SHOULD UNLOAD TAPE MANUALY, try command: mtx unload\n\n"); $TapeLoaded = 0; # don't try again return 1; } elsif ($exit_value > 1) { print("ERROR: MTX ran with non-zero exit status $Return\n\nAborting backup!\n"); print("\nYOU SHOULD UNLOAD TAPE MANUALY, try command: mtx unload\n\n"); $TapeLoaded = 0; # don't try again return 1; } elsif ($signal_num ) { print("ERROR: MTX was interrupted by signal $signal_num\n\nAborting backup!\n"); print("\nYOU SHOULD UNLOAD TAPE MANUALY, try command: mtx unload\n\n"); $TapeLoaded = 0; # don't try again return 1; } $TapeLoaded = 0; # OK, unset flag, so we will not try to unload tape at the end of this program. return 0; -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 173373] There is no notification, if no update server is available
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=173373 ------- Comment #20 from andreas.hanke(a)gmx-topmail.de 2006-10-09 11:16 MST ------- (In reply to comment #4) > No, there is no indication that a source is an update source. +Fri Oct 6 11:55:11 CEST 2006 - dmacvicar@xxxxxxx + +- Introduce a method to see if a source supports a + kind of resolvable at that time, so we can + init a YUM source like factory but avoid parsing + it if it contains no patches. +- add TODO +- zypp-checkpatches xml output +- r4235 Would that be useful here? If zypp can now see whether a source supports patches in order to avoid parsing it if it doesn't, maybe it can do the opposite as well: Complain if there is no source that does support patches. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 203287] Cannot view PDF file
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=203287 ------- Comment #6 from werner(a)novell.com 2006-10-09 10:50 MST ------- Just tried ESP Ghostscript 8.15.3 and the problem with anti-aliasing remains :( -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 202092] Umlauts sometimes not printed
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=202092 ------- Comment #22 from werner(a)novell.com 2006-10-09 10:49 MST ------- OK it works. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 205092] New: tg3 NetXtreme BCM5752 Gigabit Ethernet driver does not work with XEN guest.
by bugzilla_noreply＠novell.com 09 Oct '06

09 Oct '06

https://bugzilla.novell.com/show_bug.cgi?id=205092 Summary: tg3 NetXtreme BCM5752 Gigabit Ethernet driver does not work with XEN guest. Product: SUSE Linux 10.1 Version: Final Platform: i686 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Critical Priority: P5 - None Component: Xen AssignedTo: cgriffin(a)novell.com ReportedBy: Wojciech.Szenajch(a)bull.com.pl QAContact: qa(a)suse.de tg3 driver works correctly with normal smp kernel and Xen kernel for domain 0. It does not work for Xen guest paravirtual with OpenSuSE 10.1 installed (from DVD image) and also does not work for virutal Windows XP SP2 experimental installation (XP boots successfuly). Domain 0 kernel: 2.6.16.21-0.13-xen. Guest installation made for 2.6.16.21-0.13-xen. System boots but DHCP fails. Also setting static IP address does not help. I also created working guest on another PC: SuSE 10.1 with different ethernet card and upgraded system applying all relevant patches for the day 8.11.2006 to guest system. Next I moved this quest to machine with tg3 driver used. Xen guest successfully booted but ethernet did not work also for 2.6.16.21-0.13-xen kernel on Xen guest system. Ethernet driver details: 42: udi = '/org/freedesktop/Hal/devices/net_00_15_c5_1d_ca_1e' info.capabilities = { 'net', 'net.80203' } info.category = 'net.80203' info.parent = '/org/freedesktop/Hal/devices/pci_14e4_1600' info.product = 'Networking Interface' info.udi = '/org/freedesktop/Hal/devices/net_00_15_c5_1d_ca_1e' linux.hotplug_type = 2 (0x2) linux.subsystem = 'net' linux.sysfs_path = '/sys/class/net/eth0' net.80203.mac_address = 93501377054ull (0x15c51dca1eull) net.address = '00:15:c5:1d:ca:1e' net.arp_proto_hw_id = 1 (0x1) net.interface = 'eth0' net.interface_up = false net.linux.ifindex = 2 (0x2) net.physical_device = '/org/freedesktop/Hal/devices/pci_14e4_1600' 43: udi = '/org/freedesktop/Hal/devices/pci_14e4_1600' info.bus = 'pci' info.linux.driver = 'tg3' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d4' info.product = 'NetXtreme BCM5752 Gigabit Ethernet PCI Express' info.udi = '/org/freedesktop/Hal/devices/pci_14e4_1600' info.vendor = 'Broadcom Corporation' linux.hotplug_type = 1 (0x1) linux.subsystem = 'pci' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:09:00.0' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.2/0000:09:00.0' pci.device_class = 2 (0x2) pci.device_protocol = 0 (0x0) pci.device_subclass = 0 (0x0) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:09:00.0' pci.product = 'NetXtreme BCM5752 Gigabit Ethernet PCI Express' pci.product_id = 5632 (0x1600) pci.subsys_product = 'Unknown (0x01cc)' pci.subsys_product_id = 460 (0x1cc) pci.subsys_vendor = 'Dell' pci.subsys_vendor_id = 4136 (0x1028) pci.vendor = 'Broadcom Corporation' pci.vendor_id = 5348 (0x14e4) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11