February 2023 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1208462] New: NetworkManager, bridge reconnection fails
by bugzilla_noreply＠suse.com 19 Feb '23

19 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208462 Bug ID: 1208462 Summary: NetworkManager, bridge reconnection fails Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: screening-team-bugs(a)suse.de Reporter: epistemepromeneur(a)free.fr QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- With the plasmoid NetworkManager disconnect the bridge then reconnect the bridge NetworkManager tries infinitely to get an address. We must restart the PC. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1208389] rhino: -Xbootclasspath/p is no longer a supported option.
by bugzilla_noreply＠suse.com 19 Feb '23

19 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208389 Andreas Stieger <Andreas.Stieger(a)gmx.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |david.anes(a)suse.com, | |fstrba(a)suse.com, | |pmonrealgonzalez(a)suse.com Assignee|screening-team-bugs(a)suse.de |fstrba(a)suse.com -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1208167] New: AppArmor parser error for /etc/apparmor.d in profile /etc/apparmor.d/usr.bin.lxc-start at line 4: Could not open 'abstractions/lxc/start-container'
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208167 Bug ID: 1208167 Summary: AppArmor parser error for /etc/apparmor.d in profile /etc/apparmor.d/usr.bin.lxc-start at line 4: Could not open 'abstractions/lxc/start-container' Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Containers Assignee: containers-bugowner(a)suse.de Reporter: tamuratak.9876(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Step to reproduce: - Install lxc package - I see the following error message on AppArmor. I guess the cause would be that lxc package doesn't include config/apparmor/abstractions/start-container https://github.com/lxc/lxc/blob/master/config/apparmor/abstractions/start-c… $ sudo systemctl status apparmor.service x apparmor.service - Load AppArmor profiles Loaded: loaded (/usr/lib/systemd/system/apparmor.service; enabled; preset: enabled) Active: failed (Result: exit-code) since Sun 2023-02-12 10:37:15 JST; 3h 39min ago Process: 737 ExecStart=/lib/apparmor/apparmor.systemd reload (code=exited, status=1/FAILURE) Main PID: 737 (code=exited, status=1/FAILURE) CPU: 128ms Feb 12 10:37:15 localhost systemd[1]: Starting Load AppArmor profiles... Feb 12 10:37:15 localhost apparmor.systemd[737]: Restarting AppArmor Feb 12 10:37:15 localhost apparmor.systemd[737]: Reloading AppArmor profiles Feb 12 10:37:15 localhost apparmor.systemd[745]: Warning from stdin (line 1): Cache: failed to add read only location '/usr/share/apparmor/cache', does not contain valid cache directory for the specified feature set Feb 12 10:37:15 localhost apparmor.systemd[760]: AppArmor parser error for /etc/apparmor.d in profile /etc/apparmor.d/usr.bin.lxc-start at line 4: Could not open 'abstractions/lxc/start-container' Feb 12 10:37:15 localhost apparmor.systemd[737]: Error: At least one profile failed to load Feb 12 10:37:15 localhost systemd[1]: apparmor.service: Main process exited, code=exited, status=1/FAILURE Feb 12 10:37:15 localhost systemd[1]: apparmor.service: Failed with result 'exit-code'. Feb 12 10:37:15 localhost systemd[1]: Failed to start Load AppArmor profiles. $ cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20230210" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20230210" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20230210" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" DOCUMENTATION_URL="https://en.opensuse.org/Portal:Tumbleweed" LOGO="distributor-logo-Tumbleweed" $ rpm -qi lxc Name : lxc Version : 5.0.1 Release : 2.1 Architecture: x86_64 -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 1206763] New: perl-Net-Server 2.013-1.1 hangs after receiving a UDP packet
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1206763 Bug ID: 1206763 Summary: perl-Net-Server 2.013-1.1 hangs after receiving a UDP packet Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: screening-team-bugs(a)suse.de Reporter: David(a)WalkerStreet.info QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 863755 --> http://bugzilla.opensuse.org/attachment.cgi?id=863755&action=edit Test case for perl-Net-Server The recent upgrade to perl-Net-Server 2.013-1.1 from 2.010-1.10 causes a hang at 100% utilization (of one) CPU. This does not happen in 2.010-1.10. I've attached a simple test case. Running it and then sending it a UDP packet with, for example: echo "1234567890" | nc -4u -w1 127.0.0.1 8999 will cause a hang if version 2.013-1.1 of perl-Net-Server is installed (you can check with top), but it will quietly accept the packet if version 2.010-1.10 is installed. -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1207131] New: modprobe: ERROR could not insert 'vboxnetflt': Key was rejected by service
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1207131 Bug ID: 1207131 Summary: modprobe: ERROR could not insert 'vboxnetflt': Key was rejected by service Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Virtualization:Tools Assignee: virt-bugs(a)suse.de Reporter: pdostal(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hello, I've spotted an error with VirtualBox on Leap 15.4 x86_64 with secure boot on: > # vboxconfig > Building kernel modules... > Kernel modules built correctly. They will now be installed. > insmod /lib/modules/5.14.21-150400.24.38-default/weak-updates/extra/vboxdrv.ko > modprobe: ERROR: could not insert 'vboxnetflt': Key was rejected by service > insmod /lib/modules/5.14.21-150400.24.38-default/weak-updates/extra/vboxdrv.ko > modprobe: ERROR: could not insert 'vboxnetadp': Key was rejected by service > Kernel modules are installed and loaded. This problem is not reproducible on systems without secure boot. Please let me know if I can further help with testing. With best regards Pavel Dost�l -- You are receiving this mail because: You are on the CC list for the bug.

1 6

[Bug 1208069] Leap 15.5 & Gecko rolling plasma does not revive video from suspend?
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1208069 https://bugzilla.suse.com/show_bug.cgi?id=1208069#c14 --- Comment #14 from Fritz Hudnut <non.space.1(a)gmail.com> --- Yes. I can confirm that the 5.14.21-150500.39-default kernel that the internal grub is loading does not work to revive from suspend. The question is, I ran the "update-bootloader" command after the 6.1.12 kernel was installed, but grub doesn't seem to recognize it, nor does it seem to recognize the previous 5.14.21 xxxxx .80 kernel either. I have to use the ext Super Grub2 drive option to select the 6.1.12 option. So far it is only the newest 6.1.12 kernel that revives the machine from suspend, so the question remains, how to get that kernel to be selected as "running"??? Do I have to remove all of the other kernels?? I thought grub would select the newest kernel installed to be the "running" kernel? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1208448] New: Kernel updates after a zypper dup can leave system with no kernel to boot into
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208448 Bug ID: 1208448 Summary: Kernel updates after a zypper dup can leave system with no kernel to boot into Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: socvirnyl.estela(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hello. I was updating my openSUSE Tumbleweed machine with `zypper dup` and ended up having no kernel to boot into in my grub menu. So I will always go to an older snapshot by selecting advanced options from the menu. I have experienced this in the past and was able to fix it by booting into an installation media and chrooting to the existing installation forcing it to rebuild through chroot. Anyway, I don't know how to reproduce this nor have any idea how it happened. I have a guess that it might be the snapshot mechanism from snapper that does not sync well fast enough for it to recognize the regenerated kernel. -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 1208395] New: Bluetooth multi-point playback issue on second device when first device playing
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1208395 Bug ID: 1208395 Summary: Bluetooth multi-point playback issue on second device when first device playing Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Sound Assignee: tiwai(a)suse.com Reporter: pablo(a)blueoakdb.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hi, My earbuds support the ability to pair with two Bluetooth devices. With one device playing music, if the second generates a sound, it never gets played. The following errors are written in `journalctl`: > Feb 16 10:55:41.567678 zoom wireplumber[14625]: (bluez_output.50_C2_ED_5E_F6_DC.1-19) running -> error (Received error event) > Feb 16 10:55:41.567826 zoom pipewire[14623]: pw.node: (bluez_output.50_C2_ED_5E_F6_DC.1-97) running -> error (Received error event) > Feb 16 10:55:47.739386 zoom wireplumber[14625]: (bluez_output.50_C2_ED_5E_F6_DC.1-19) running -> error (Received error event) > Feb 16 10:55:47.739719 zoom pipewire[14623]: pw.node: (bluez_output.50_C2_ED_5E_F6_DC.1-97) idle -> error (Received error event) ::: Test Case ::: Assume a previously paired phone and a laptop along with a KDE environment (for the sound sample :) + Play music on the phone + On the laptop `pw-play /usr/share/sounds/Oxygen-Im-Nudge.ogg` The sound is never heard and the above error is generated. ::: Work-around ::: Switch sound sinks on the laptop. ::: Environment ::: :::: pactl info :::: > Server String: /run/user/1000/pulse/native > Library Protocol Version: 35 > Server Protocol Version: 35 > Is Local: yes > Client Index: 137 > Tile Size: 65472 > User Name: pablo > Host Name: zoom > Server Name: PulseAudio (on PipeWire 0.3.65) > Server Version: 15.0.0 > Default Sample Specification: float32le 2ch 48000Hz > Default Channel Map: front-left,front-right > Default Sink: bluez_output.50_C2_ED_5E_F6_DC.1 > Default Source: alsa_input.pci-0000_00_1f.3-platform-sof_sdw.HiFi__hw_sofsoundwire_4__source > Cookie: 16c2:b8f0 :::: rpm -qa | fgrep -i pipewire :::: > pipewire-tools-0.3.65-1.3.x86_64 > pipewire-0.3.65-1.3.x86_64 > libKPipeWireRecord5-5.27.0-1.1.x86_64 > libKPipeWire5-5.27.0-1.1.x86_64 > pipewire-spa-plugins-0_2-0.3.65-1.3.x86_64 > pipewire-spa-tools-0.3.65-1.3.x86_64 > pipewire-aptx-0.3.65-1.1.x86_64 > pipewire-modules-0_3-0.3.65-1.3.x86_64 > kpipewire-imports-5.27.0-1.1.x86_64 > pipewire-alsa-0.3.65-1.3.x86_64 > pipewire-pulseaudio-0.3.65-1.3.x86_64 > libKPipeWireDmaBuf5-5.27.0-1.1.x86_64 > libpipewire-0_3-0-0.3.65-1.3.x86_64 -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 1207256] New: okular: cannot move/delete annotations
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1207256 Bug ID: 1207256 Summary: okular: cannot move/delete annotations Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: Other OS: openSUSE Leap 15.4 Status: NEW Severity: Normal Priority: P5 - None Component: KDE Applications Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: ulrich.deiters(a)uni-koeln.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- After placing an annotation I can no longer modify its location or size, invoke its properties menu, or delete it with my mouse. A left double click brings up the contents of a stick note, and I can modify these. Moreover CTRL-z removes a freshly set annotation. But a right click does not evoke any reactions, nor does CTRL-left-move. -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 1208450] New: Yast does not show required packages in dependencies tab
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208450 Bug ID: 1208450 Summary: Yast does not show required packages in dependencies tab Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: opensuse(a)1.opensuse.bgcomp.co.uk QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Choose a package to install, click on it, then click on the dependencies tab. It shows dependencies & pre-dependencies amongst others. However it does not list recommended packages which is a severe pain when trying to work out why the system picks so much junk. It is also impossible to deselect these recommended when the system pops up the window saying these have been automatically selected, we should be able to deselect them from that popup. -- You are receiving this mail because: You are on the CC list for the bug.

1 0