February 2023 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1207253] New: Using Yast commandline edit does not work
by bugzilla_noreply＠suse.com 10 Mar '23

10 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1207253 Bug ID: 1207253 Summary: Using Yast commandline edit does not work Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.3 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: hh_fiddelke(a)cdk.de QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Hello, using for example the command line "yast dns edit hostname=HOSTNAME" causes in Leap 15.4 (older and newer distros similar) the error >>>>> Warning: unable to close filehandle properly: Bad file descriptor, <STDIN> line 3 during global destruction (#1) (S io) There were errors during the implicit close() done on a filehandle when its reference count reached zero while it was still open, e.g.: { open my $fh, '>', $file or die "open: '$file': $!\n"; print $fh $data or die "print: $!"; } # implicit close here Because various errors may only be detected by close() (e.g. buffering could allow the print in this example to return true even when the disk is full), it is dangerous to ignore its result. So when it happens implicitly, perl will signal errors by warning. Prior to version 5.22.0, perl ignored such errors, so the common idiom shown above was liable to cause silent data loss. <<<< which seems to be a known problem in the past. Cause for this error seems to be the package "perl-TermReadLine-Gnu" (consider naming) V1.20, which is part of all 15.X Leap distributions. Replacing this with the package perl-Term-ReadLine-Gnu V1.45 (also consider naming) from https://software.opensuse.org/package/perl-Term-ReadLine-Gnu seems to fix the issue, but is missing in distributions -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 1204333] New: syslog-ng: Error opening file for writing; filename='/dev/tty1', error='Permission denied (13)'
by bugzilla_noreply＠suse.com 10 Mar '23

10 Mar '23

https://bugzilla.suse.com/show_bug.cgi?id=1204333 Bug ID: 1204333 Summary: syslog-ng: Error opening file for writing; filename='/dev/tty1', error='Permission denied (13)' Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: opensuse(a)mike.franken.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Yesterday I updated my Tumbleweed machine after a few weeks of vacation. Since then I get this error message every so often: syslog-ng: Error opening file for writing; filename='/dev/tty1', error='Permission denied (13)' I checked the syslog-ng apparmor file, but it still contains /dev/tty1 rw, ls -l /dev/tty1 crw--w---- 1 root tty 4, 1 Oct 15 12:43 /dev/tty1 I'm not sure, if and how the permissions for /dev/tty1 have been changed, though. They seem to be identical on other machines, where syslog doesn't give that error message. -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1206960] New: 'btrfs qgroup show' fails to show max values in json output
by bugzilla_noreply＠suse.com 10 Mar '23

10 Mar '23

https://bugzilla.suse.com/show_bug.cgi?id=1206960 Bug ID: 1206960 Summary: 'btrfs qgroup show' fails to show max values in json output Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: aschnell(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Using the new JSON output of 'btrfs qgroup show' aborts when a qgroup has a max referenced or max exclusive limit set. -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1201088] New: GCC 13: ceph package fails
by bugzilla_noreply＠suse.com 10 Mar '23

10 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1201088 Bug ID: 1201088 Summary: GCC 13: ceph package fails Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: martin.liska(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The package fails due to: [ 183s] /home/abuild/rpmbuild/BUILD/ceph-16.2.9-158-gd93952c7eea/src/rocksdb/db/compaction/compaction_iteration_stats.h:23:3: error: 'uint64_t' does not name a type [ 183s] 23 | uint64_t total_filter_time = 0; [ 183s] | ^~~~~~~~ [ 183s] /home/abuild/rpmbuild/BUILD/ceph-16.2.9-158-gd93952c7eea/src/rocksdb/db/compaction/compaction_iteration_stats.h:9:1: note: 'uint64_t' is defined in header '<cstdint>'; did you forget to '#include <cstdint>'? [ 183s] 8 | #include "rocksdb/rocksdb_namespace.h" [ 183s] +++ |+#include <cstdint> as documented here: https://gcc.gnu.org/gcc-13/porting_to.html#header-dep-changes please report it to upstream. One can build with gcc13 with: osc build --alternative-project devel:gcc:next -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 1207204] New: pri3 ATF gets installed to boot partition
by bugzilla_noreply＠suse.com 10 Mar '23

10 Mar '23

https://bugzilla.suse.com/show_bug.cgi?id=1207204 Bug ID: 1207204 Summary: pri3 ATF gets installed to boot partition Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader Assignee: screening-team-bugs(a)suse.de Reporter: msuchanek(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- After installing arm-trusted-firmware-rpi3-2.7-5.1.noarch I get /boot/vc/armstub8.bin and on boot I see this and after that system does not continue booting NOTICE: Booting Trusted Firmware NOTICE: BL1: v2.7(debug): NOTICE: BL1: Built : 09:05:12, Jan 10 2023 INFO: BL1: RAM 0x100ee000 - 0x100f7000 INFO: BL1: cortex_a53: CPU workaround for 843419 was applied INFO: BL1: cortex_a53: CPU workaround for 855873 was applied WARNING: BL1: cortex_a53: CPU workaround for 1530924 was missing! NOTICE: rpi3: Detected: Raspberry Pi 3 Model B (1GB, Sony, UK) [0x00a02082] INFO: BL1: Loading BL2 INFO: Loading image id=1 at address 0x100b4000 INFO: Image id=1 loaded: 0x100b4000 - 0x100bc1f1 NOTICE: BL1: Booting BL2 INFO: Entry point address = 0x100b4000 INFO: SPSR = 0x3c5 NOTICE: BL2: v2.7(debug): NOTICE: BL2: Built : 09:05:12, Jan 10 2023 INFO: BL2: Doing platform setup INFO: BL2: Loading image id 3 INFO: Loading image id=3 at address 0x100e0000 INFO: Image id=3 loaded: 0x100e0000 - 0x100e9073 INFO: BL2: Loading image id 5 INFO: Loading image id=5 at address 0x11000000 INFO: Image id=5 loaded: 0x11000000 - 0x110a15b8 NOTICE: BL1: Booting BL31 INFO: Entry point address = 0x100e0000 INFO: SPSR = 0x3cd NOTICE: BL31: v2.7(debug): NOTICE: BL31: Built : 09:05:12, Jan 10 2023 INFO: rpi3: Checking DTB... INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 843419 was applied INFO: BL31: cortex_a53: CPU workaround for 855873 was applied WARNING: BL31: cortex_a53: CPU workaround for 1530924 was missing! INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x11000000 INFO: SPSR = 0x3c9 Removing the file fixes the problem. -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1204342] New: MATE CPU Frequency Monitoring stuck at lowest CPU speed
by bugzilla_noreply＠suse.com 10 Mar '23

10 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1204342 Bug ID: 1204342 Summary: MATE CPU Frequency Monitoring stuck at lowest CPU speed Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: screening-team-bugs(a)suse.de Reporter: llrainey15(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I have development machines for 15.4 and Tumbleweed. The 15.4 Mate machines show the correct CPU speed in the CPU Frequency Monitoring Panel Applet. The Tumbleweed only show the Slowest speed of the CPU and does not update. -- You are receiving this mail because: You are on the CC list for the bug.

1 7

[Bug 1204115] New: When user is asked for password openvpn connection fails
by bugzilla_noreply＠suse.com 10 Mar '23

10 Mar '23

https://bugzilla.suse.com/show_bug.cgi?id=1204115 Bug ID: 1204115 Summary: When user is asked for password openvpn connection fails Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: gnome-bugs(a)suse.de Reporter: msuchanek(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Connection password cannot be set in UI because of 'insufficient privileges' When wrong password is set in configuration NM tries to connect, fails, then asks for the password, and fails to connect again although the correct password has been given. Only way to connect is to shut down NM, and edit configuration by hand to provide current password. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 1208559] New: VUL-0: CVE-2022-31394: pijul: hyper: max header list size not settable allowing deny of service
by bugzilla_noreply＠suse.com 09 Mar '23

09 Mar '23

https://bugzilla.suse.com/show_bug.cgi?id=1208559 Bug ID: 1208559 Summary: VUL-0: CVE-2022-31394: pijul: hyper: max header list size not settable allowing deny of service Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: https://smash.suse.de/issue/357841/ OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Security Assignee: igonzalezsosa(a)suse.com Reporter: thomas.leroy(a)suse.com QA Contact: security-team(a)suse.de Blocks: 1208551 Found By: Security Response Team Blocker: --- +++ This bug was initially created as a clone of Bug #1208551 +++ CVE-2022-31394 Hyperium Hyper before 0.14.19 does not allow for customization of the max_header_list_size method in the H2 third-party software, allowing attackers to perform HTTP2 attacks. References: http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2022-31394 https://www.cve.org/CVERecord?id=CVE-2022-31394 https://github.com/hyperium/hyper/compare/v0.14.18...v0.14.19 https://github.com/hyperium/hyper/issues/2826 https://github.com/hyperium/hyper/pull/2828 -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1027519] New: Xen: Missing upstream bug fixes
by bugzilla_noreply＠novell.com 09 Mar '23

09 Mar '23

http://bugzilla.suse.com/show_bug.cgi?id=1027519 Bug ID: 1027519 Summary: Xen: Missing upstream bug fixes Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Xen Assignee: xen-bugs(a)suse.de Reporter: carnold(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- There are upstream patches fixing bugs needed for this version of Xen. -- You are receiving this mail because: You are on the CC list for the bug.

2 293

[Bug 1208103] New: zlib 1.2.5 matched in python3-base-3.6.15-150300.10.37.2.x86_64.rpm
by bugzilla_noreply＠suse.com 09 Mar '23

09 Mar '23

https://bugzilla.suse.com/show_bug.cgi?id=1208103 Bug ID: 1208103 Summary: zlib 1.2.5 matched in python3-base-3.6.15-150300.10.37.2.x86_64.rpm Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: screening-team-bugs(a)suse.de Reporter: simonalogan(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Our security scanning tool has matched zlib 1.2.5 in python3-base-3.6.15-150300.10.37.2.x86_64.rpm as follows. Full File Path python3-base-3.6.15-150300.10.37.2.x86_64.rpm/usr/lib64/python3.6/distutils/command/wininst-10.0-amd64.exe Signature 0:"inflate 1.2.5 Copyright 1995-2010 Mark Adler" Full File Path python3-base-3.6.15-150300.10.37.2.x86_64.rpm/usr/lib64/python3.6/distutils/command/wininst-10.0.exe Signature 0:"inflate 1.2.5 Copyright 1995-2010 Mark Adler" There are a number of high severity CVEs associated with zlib 1.2.5. Is it possible to have this updated? Thanks, Simon -- You are receiving this mail because: You are on the CC list for the bug.

1 3