February 2023 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1207374] Cannot set up iscsi targets during installation
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1207374 https://bugzilla.suse.com/show_bug.cgi?id=1207374#c12 --- Comment #12 from Lee Duncan <lduncan(a)suse.com> --- (In reply to Stefan Hundhammer from comment #9) > Michal, thanks for notifying us about this. > > This probably sounded like a transparent thing to Lee Duncan, handled > entirely within the open-iscsi package; but we need to so some things about > that in YaST / the inst-sys as well: > > - make sure that /var/lib/iscsi/* is writable (on the RAM disk) in the > inst-sys > > - When we copy the iscsi setup from the inst-sys to the target at the end of > the installation (after installing all the RPMs), copy /var/lib/iscsi/ to > /mnt/var/lib/iscsi/, not /etc/iscsi/ to /mnt/etc/iscsi. > > > We'll have to check if more needs to be done. Apologies for not knowing that the install took special care of /etc/iscsi. As far as "check if more needs to be done", not that I know of. You should actually still copy /etc/iscsi, since that's where the config file iscsid.conf and the initiator name file initiatorname.iscsi live. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1207374] Cannot set up iscsi targets during installation
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1207374 https://bugzilla.suse.com/show_bug.cgi?id=1207374#c11 --- Comment #11 from Lee Duncan <lduncan(a)suse.com> --- It is a Tumbleweed requirement to move database file out of /etc. Yes, I did assume that /var/lib/iscsi would be just as writable at target setup time as /etc/iscsi was. Note that iscsi configuration file is still in /etc/iscsi. Also, during installation, any existing database files in /etc/iscsi/nodes are copied to /var/lib/iscsi/nodes I believe (if that matters). -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1196859] libcurl memory leak: curl_global_cleanup() does not free all memory allocated by curl_global_init(CURL_GLOBAL_ALL)
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1196859 https://bugzilla.suse.com/show_bug.cgi?id=1196859#c7 Pedro Monreal Gonzalez <pmonrealgonzalez(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |otto.hollmann(a)suse.com, | |pmonrealgonzalez(a)suse.com --- Comment #7 from Pedro Monreal Gonzalez <pmonrealgonzalez(a)suse.com> --- I'm also adding the OpenSSL maintainer in CC. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1207314] nvidia G06 525.86.05 on TW 20230118: sddm-greeter dumps core, no login screen
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1207314 https://bugzilla.suse.com/show_bug.cgi?id=1207314#c42 --- Comment #42 from Pablo Sanchez <pablo(a)blueoakdb.com> --- I think I might have to tweak my Xorg.conf file per https://github.com/wildtruc/nvidia-prime-select/blob/master/OFFLOAD.md. I like the idea of using the iGPU and 'offloading' to my dGPU. I think at this point, I'm out-of-scope on this bug so I won't talk further about offloading. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1207374] Cannot set up iscsi targets during installation
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1207374 https://bugzilla.suse.com/show_bug.cgi?id=1207374#c10 --- Comment #10 from Micha�� Szczepaniak <m.szczepaniak.000(a)gmail.com> --- I'm just glad it will be fixed :) -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1208069] New: Leap 15.5 & Gecko rolling plasma does not revive video from suspend?
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208069 Bug ID: 1208069 Summary: Leap 15.5 & Gecko rolling plasma does not revive video from suspend? Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.5 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: non.space.1(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Having a recurring issue with Leap 15.5 not reviving from suspend on '12 Mac Pro, and the issue was also happening in another installed system, Gecko rolling Plasma. Leap 15.5 will suspend the machine and clicking on shift key will again start the "engine" and the display light turns blue, but the screen stays black. In the case of the Gecko install clicking suspend the machine makes some funny noise like it is "trying" to suspend, but the machine keeps running, the screen goes black. In one of the installs I got the display to come back up, but mousing around and clicking on the GUI does nothing . . . I think that was the Leap 15.5. I was switching systems to see if it was a "hardware" issue, but when I got to my Manjaro install it's fine; I can suspend and wake from suspend. I'm typing this in Manjaro. A forum request has been started on opensuse, so far the only suggestion in it has been to "file a bug report on bugzilla." The bugzilla server showed me another similar bug report from 2017 on a Plasma system; didn't have time today to read through it . . . just making the report here. https://bugzilla.opensuse.org/show_bug.cgi?id=1047729 -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 1208003] Support EFI 32/64 bit mixed mode (Was: installation images do not support 32-bit EFI)
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1208003 https://bugzilla.suse.com/show_bug.cgi?id=1208003#c12 --- Comment #12 from Stefan Hundhammer <shundhammer(a)suse.com> --- You mean #c9, about Bugzilla? Back when SUSE was purchased by Novell (around 2003 or 2004?), we needed to unify the bugtrackers between both companies, and the result was a heavily modified Bugzilla with many custom changes, so the bug history of both companies could be retained, and many very specific features. So compatibility with upstream seemed to have suffered a lot. Yes, I know that a modern Bugzilla, while neither pretty nor particularly feature rich or user friendly, at least offers some basics like editing one's posts. It's at least on a level of, say, 2010 software. Ours is not. :-(( -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1201627] openssl-1_0_0 FTBFS 2023-05-26
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1201627 https://bugzilla.suse.com/show_bug.cgi?id=1201627#c11 Otto Hollmann <otto.hollmann(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|IN_PROGRESS |RESOLVED Resolution|--- |FIXED --- Comment #11 from Otto Hollmann <otto.hollmann(a)suse.com> --- All codestreams fixed, closing this bug. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1207314] nvidia G06 525.86.05 on TW 20230118: sddm-greeter dumps core, no login screen
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1207314 https://bugzilla.suse.com/show_bug.cgi?id=1207314#c41 --- Comment #41 from Ra�l Osuna <rosuna(a)suse.com> --- (In reply to Pablo Sanchez from comment #40) > (In reply to Ra�l Osuna from comment #39) > > [ trimmed ] > > > > sudo init 3 > > sudo /usr/sbin/prime-select offload > > reboot > > Hi Ra�l, > > I wanted to thank you for posting the above: Thank you! > > It seems to have solved my issue! \o/ > > I have rebooted my computer five/six times and now SDDM is happily > presenting a log in screen. Before, I'd only get a cursor. My only > recourse was to kill Xorg from a virtual console. Glad it helped! For me, the issue came back the following day. But it seems stable again after adding the prime-select service to systemd, it was disabled: # sudo systemctl enable prime-select.service Whether this should be on by default, I don't know, but I don't remember having messed up with the service myself (although if I did that at installation time, 6 months ago, I would not remember, but since then, I haven't touched that service for sure. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1207314] nvidia G06 525.86.05 on TW 20230118: sddm-greeter dumps core, no login screen
by bugzilla_noreply＠suse.com 08 Feb '23

08 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1207314 https://bugzilla.suse.com/show_bug.cgi?id=1207314#c40 --- Comment #40 from Pablo Sanchez <pablo(a)blueoakdb.com> --- (In reply to Ra�l Osuna from comment #39) > [ trimmed ] > > sudo init 3 > sudo /usr/sbin/prime-select offload > reboot Hi Ra�l, I wanted to thank you for posting the above: Thank you! It seems to have solved my issue! \o/ I have rebooted my computer five/six times and now SDDM is happily presenting a log in screen. Before, I'd only get a cursor. My only recourse was to kill Xorg from a virtual console. -- You are receiving this mail because: You are on the CC list for the bug.

1 0