November 2023 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1216366] New: YaST installation with sd-boot: Disabling the menu timeout is not possible
by bugzilla_noreply＠suse.com 02 Feb '24

02 Feb '24

https://bugzilla.suse.com/show_bug.cgi?id=1216366 Bug ID: 1216366 Summary: YaST installation with sd-boot: Disabling the menu timeout is not possible Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: schubi(a)suse.com Reporter: fvogt(a)suse.com QA Contact: jsrain(a)suse.com CC: yast2-maintainers(a)suse.de Target Milestone: --- Found By: --- Blocker: --- To disable the timeout for the systemd-boot menu, "menu-force" needs to be used, but YaST only allows integer values for the timeout. When -1 is entered, systemd-boot prints an error message that this is an invalid value. Either YaST should explicitly support menu-force or translate -1 to menu-force internally. -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1217492] New: KVM vm client can no longer use a USB pass through device
by bugzilla_noreply＠suse.com 30 Jan '24

30 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1217492 Bug ID: 1217492 Summary: KVM vm client can no longer use a USB pass through device Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: x86-64 OS: openSUSE Leap 15.5 Status: NEW Severity: Normal Priority: P5 - None Component: KVM Assignee: kvm-bugs(a)suse.de Reporter: opensuse(a)pohw.nl QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- After upgrading a VM host from Leap 15.2 to Leap 15.5 a VM client can no longer use a pass-through USB device. The syslog of the VM host is flooded with: > nov 08 19:59:46 vmhost kernel: usb 1-3: usbfs: process 1729 (qemu-system-x86) did not claim interface 1 before use The flooding is at 1 second interval. Because of the upgrade the vm host has gotten both a new kernel version and a new libvirt version. The vm client has not been touched. The USB device in question is a Conbee II Zigbee stick (serial device). I progressed through the normal upgrade path (all in one day): - Leap 15.2: USB pass through: OK (this was my baseline) - Leap 15.3: Not checked - Leap 15.4: USB pass through: NOT OK - Leap 15.5: USB pass through: NOT OK I've checked with the libvirt developers (see https://lists.libvirt.org/archives/list/devel@lists.libvirt.org/message/57H…) and it was suggested the openSUSE kernel is at fault. -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 1216842] New: mozilla:Factory/MozillaFirefox: Bug
by bugzilla_noreply＠suse.com 30 Jan '24

30 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1216842 Bug ID: 1216842 Summary: mozilla:Factory/MozillaFirefox: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: wolfgang(a)rosenauer.org Reporter: pallaswept(a)proton.me QA Contact: screening-team-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- Created attachment 870608 --> https://bugzilla.suse.com/attachment.cgi?id=870608&action=edit Left side: list too short. Not working. Right side: List longer than screen, works. In KDE Wayland sessions, tabs in the all tabs list cannot be drag-and-dropped to move them. This is reproducible in openSUSE KDE Live DVD images including today's most recent one, so fully up to date and completely unmodified. eg https://mirror.2degrees.nz/opensuse/tumbleweed/iso/openSUSE-Tumbleweed-KDE-… Just boot it ina VM and observe this bug in action. You will need to log out of the default X11 session and then log into a KDE Wayland session, start firefox, create several tabs, opent he all tabs list, and try to drag and drop them. You will fail. I have tested this on 3 different bare metal machines as well as VMs. This does not occur in KDE X11 sessions, or in Wayland sessions on other DEs or distros. It is specific to openSUSE KDE Wayland. I keep trying to open this bug and it gets closed or moved off this project and gets no visibility, so if you're wondering why I'm creating it again, no, I'm not spamming, I'm un-breaking it the only way I can. I've found a way to prove it too, because I found a workaround. If you make the all tabs list longer than the screen, it starts to work. You can then close the superfluous tabs and it continues to work for that window only. Screenshot attached. This is screen-size-specific - if I do it on a 1440p monitor, the list must have more tabs than for the 1080p monitor. It has to reach the bottom of the screen, then it magically starts to work. Restarting firefox will reset this behaviour, it is not maintained with the session. In the screenshot you can see I have taken the browser and hit ctrl+t a bunch of times to create a list, one tab shorter than the length of the screen. At the moment of this screenshot I have clicked and dragged one of the tabs and it will not move. Note the lack of blue marker on the left. Then I hit ctrl+t one more time, to create an extra tab. Now the list is long enough to fill the screen, and it works as it should always do, and grab a tab, drag it, and I take the screenshot on the right. Note the blue marker showing that I am drag and dropping the tab. PLEASE don't close this bug or move it again, it's a real thing and it's tiring to have to keep re-logging it so that the right people see it. -- You are receiving this mail because: You are on the CC list for the bug.

1 7

[Bug 1215427] New: GCC13 fails to compile some packages with error: unrecognizable insn
by bugzilla_noreply＠suse.com 30 Jan '24

30 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1215427 Bug ID: 1215427 Summary: GCC13 fails to compile some packages with error: unrecognizable insn Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: aarch64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: screening-team-bugs(a)suse.de Reporter: guillaume.gardet(a)arm.com QA Contact: qa-bugs(a)suse.de CC: afaerber(a)suse.com, dmueller(a)suse.com, rguenther(a)suse.com Target Milestone: --- Found By: --- Blocker: --- In openSUSE:Factory:ARM:Rings:1-MinimalX we have 3 packages failing the same way: fcitx libcamera Mesa:drivers Maybe related to gcc13 update? https://build.opensuse.org/request/show/1110686 The error log from Mesa:drivers is: [ 1828s] ../src/gallium/frontends/nine/nine_state.c: In function ‘nine_update_state’: [ 1828s] ../src/gallium/frontends/nine/nine_state.c:1316:1: error: unrecognizable insn: [ 1828s] 1316 | } [ 1828s] | ^ [ 1828s] (insn 10725 4838 4840 277 (parallel [ [ 1828s] (set (mem/c:SI (plus:DI (reg/f:DI 29 x29) [ 1828s] (const_int -260 [0xfffffffffffffefc])) [143 %sfp+-260 S4 A32]) [ 1828s] (reg:SI 0 x0 [orig:800 _1297 ] [800])) [ 1828s] (set (mem/c:SI (plus:DI (reg/f:DI 29 x29) [ 1828s] (const_int -256 [0xffffffffffffff00])) [143 %sfp+-256 S4 A32]) [ 1828s] (reg:SI 0 x0 [orig:800 _1297 ] [800])) [ 1828s] ]) "../src/util/bitscan.h":219:22 discrim 1 -1 [ 1828s] (expr_list:REG_DEAD (reg:SI 0 x0 [orig:800 _1297 ] [800]) [ 1828s] (nil))) [ 1828s] during RTL pass: cprop_hardreg [ 1828s] ../src/gallium/frontends/nine/nine_state.c:1316:1: internal compiler error: in extract_insn, at recog.cc:2791 [ 1828s] 0xb8d633 internal_error(char const*, ...) [ 1828s] ???:0 [ 1828s] 0xb83a0b fancy_abort(char const*, int, char const*) [ 1828s] ???:0 [ 1828s] 0x77e717 _fatal_insn(char const*, rtx_def const*, char const*, int, char const*) [ 1828s] ???:0 [ 1828s] 0x77e753 _fatal_insn_not_found(rtx_def const*, char const*, int, char const*) [ 1828s] ???:0 [ 1828s] 0x102b27b extract_insn(rtx_insn*) [ 1828s] ???:0 [ 1828s] Please submit a full bug report, with preprocessed source (by using -freport-bug). [ 1828s] Please include the complete backtrace with any bug report. [ 1828s] See <https://bugs.opensuse.org/> for instructions. [ 1828s] make: *** [/tmp/cc1ZTVEw.mk:47: /tmp/cclOD5f9.ltrans15.ltrans.o] Error 1 [ 1828s] make: *** Waiting for unfinished jobs.... [ 1828s] lto-wrapper: fatal error: make returned 2 exit status [ 1828s] compilation terminated. [ 1828s] /usr/lib64/gcc/aarch64-suse-linux/13/../../../../aarch64-suse-linux/bin/ld: error: lto-wrapper failed [ 1828s] collect2: error: ld returned 1 exit status -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1214049] New: USB audio dies after idle
by bugzilla_noreply＠suse.com 30 Jan '24

30 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1214049 Bug ID: 1214049 Summary: USB audio dies after idle Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: Other OS: openSUSE Leap 15.4 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: aaron.w2(a)gmail.com QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- Created attachment 868666 --> https://bugzilla.suse.com/attachment.cgi?id=868666&action=edit lsusb -v output After a recent kernel update within the past week or so I have been experiencing a problem where if audio is stopped for a while it will never restart when using a USB HID audio device. In the logs I see the following: usb_set_interface failed (-19) I have swapped the cable and that made no difference. Note that if audio is constantly active it will continue to work without issues. [33346.442012] usb 7-4: New USB device found, idVendor=1852, idProduct=7022, bcdDevice= 0.01 [33346.442023] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [33346.442027] usb 7-4: Product: DigiHug USB Audio [33346.442031] usb 7-4: Manufacturer: GFEC ASSP [33346.529561] input: GFEC ASSP DigiHug USB Audio as /devices/pci0000:40/0000:40:07.1/0000:45:00.3/usb7/7-4/7-4:1.0/0003:1852:7022.001B/input/input54 [33346.586066] hid-generic 0003:1852:7022.001B: input,hidraw11: USB HID v1.00 Device [GFEC ASSP DigiHug USB Audio] on usb-0000:45:00.3-4/input0 [33360.314128] usb 3-1.3.1: reset high-speed USB device number 36 using xhci_hcd Note that the audio recovers if I unplug and reconnect the audio device. It does not matter which application is generating the audio. The USB audio device is also plugged directly into a motherboard USB port and not a hub. Desktop is running KDE factory. Kernel is 5.14.21-150400.24.74-default #1 SMP PREEMPT_DYNAMIC I have a lot of USB devices connected. -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 1215538] New: systemd-sysusers fails when upgrading packages on WSL with Failed to take /etc/passwd lock
by bugzilla_noreply＠suse.com 29 Jan '24

29 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1215538 Bug ID: 1215538 Summary: systemd-sysusers fails when upgrading packages on WSL with Failed to take /etc/passwd lock Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Windows 10 Status: NEW Severity: Normal Priority: P5 - None Component: WSL Assignee: sle-ms(a)suse.de Reporter: brunopitrus(a)hotmail.com QA Contact: qa-c(a)suse.de Target Milestone: --- Found By: --- Blocker: --- When trying to upgrade a Tumbleweed installation on WSL (Windows 10 19045.3448), several core system packages are failing to install: /usr/bin/systemd-sysusers --replace=/usr/lib/sysusers.d/system-user-nobody.conf - Failed to take /etc/passwd lock: Invalid argument error: %prein(system-user-nobody-20170617-25.1.noarch) scriptlet failed, exit status 1 (0/5) Executing prein script for: system-user-nobody-20170617-25.1.noarch .................[błąd] error: system-user-nobody-20170617-25.1.noarch: install failed /usr/bin/systemd-sysusers --replace=/usr/lib/sysusers.d/system-user-man.conf - Failed to take /etc/passwd lock: Invalid argument error: %prein(system-user-man-20170617-25.1.noarch) scriptlet failed, exit status 1 (0/5) Executing prein script for: system-user-man-20170617-25.1.noarch ....................[błąd] error: system-user-man-20170617-25.1.noarch: install failed /usr/bin/systemd-sysusers --replace=/usr/lib/sysusers.d/system-user-lp.conf - Failed to take /etc/passwd lock: Invalid argument error: %prein(system-user-lp-20170617-25.1.noarch) scriptlet failed, exit status 1 (0/5) Executing prein script for: system-user-lp-20170617-25.1.noarch .....................[błąd] error: system-user-lp-20170617-25.1.noarch: install failed /usr/bin/systemd-sysusers --replace=/usr/lib/sysusers.d/system-user-games.conf - Failed to take /etc/passwd lock: Invalid argument error: %prein(system-user-games-20170617-25.1.noarch) scriptlet failed, exit status 1 (0/5) Executing prein script for: system-user-games-20170617-25.1.noarch ..................[błąd] error: system-user-games-20170617-25.1.noarch: install failed /usr/bin/systemd-sysusers --replace=/usr/lib/sysusers.d/dbus.conf - Failed to take /etc/passwd lock: Invalid argument error: %prein(dbus-1-common-1.14.8-1.3.noarch) scriptlet failed, exit status 1 (0/5) Executing prein script for: dbus-1-common-1.14.8-1.3.noarch .........................[błąd] error: dbus-1-common-1.14.8-1.3.noarch: install failed error: system-user-nobody-20170617-24.13.noarch: erase skipped error: system-user-man-20170617-24.13.noarch: erase skipped error: system-user-lp-20170617-24.13.noarch: erase skipped error: system-user-games-20170617-24.13.noarch: erase skipped error: dbus-1-common-1.14.8-1.2.noarch: erase skipped -- You are receiving this mail because: You are on the CC list for the bug.

1 8

[Bug 1217220] New: [SELinux] current MicroOS doesn't allow ssh login
by bugzilla_noreply＠suse.com 29 Jan '24

29 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1217220 Bug ID: 1217220 Summary: [SELinux] current MicroOS doesn't allow ssh login Classification: openSUSE Product: openSUSE Leap Micro Version: 5.4 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Base Assignee: security-team(a)suse.de Reporter: jsegitz(a)suse.com QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- While investigating another SELinux issue I installed openSUSE-MicroOS-DVD-x86_64-Snapshot20231114-Media.iso with default settings. After installation and adding PermitRootLogin yes to the sshd config root still can't log in setenforce 0 allows to log in. No visible AVCs. Disabling dontaudit yields type=AVC msg=audit(1700130079.518:309): avc: denied { read } for pid=1178 comm="sshd" name="shadow" dev="overlay" ino=20716 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:shadow_t:s0 tclass=file permissive=1 type=AVC msg=audit(1700130079.518:310): avc: denied { open } for pid=1178 comm="sshd" path="/etc/shadow" dev="overlay" ino=20716 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:shadow_t:s0 tclass=file permissive=1 type=AVC msg=audit(1700130079.518:311): avc: denied { getattr } for pid=1178 comm="sshd" path="/etc/shadow" dev="overlay" ino=20716 scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=system_u:object_r:shadow_t:s0 tclass=file permissive=1 type=AVC msg=audit(1700130079.691:323): avc: denied { noatsecure } for pid=1179 comm="sshd" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tclass=process permissive=1 type=AVC msg=audit(1700130079.691:324): avc: denied { siginh } for pid=1179 comm="bash" scontext=system_u:system_r:sshd_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tclass=process permissive=1 upon successful login. I'll be away in a couple of minutes an likely will not be able to work on this today -- You are receiving this mail because: You are on the CC list for the bug.

1 42

[Bug 1214420] New: [LXQt]compton-conf / picom
by bugzilla_noreply＠suse.com 27 Jan '24

27 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1214420 Bug ID: 1214420 Summary: [LXQt]compton-conf / picom Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: LXQt Assignee: mvetter(a)suse.com Reporter: psi089(a)gmx.de QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- Problem: After installation picom did not start because it lacked a config file. lxqt-config starts compton-conf which writes to .config/compton.conf but picom is used as compositor and expects to read from .config/picom.conf Further: on manual startup picom complains about deprecated config entries that got written by the currently used tool. What is the solution? For now I just softlinked picom.conf to compton.conf, but it looks like some clean fix is needed and to make it work out of the box. -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1216061] New: Syntax error in update_postmaps script
by bugzilla_noreply＠suse.com 26 Jan '24

26 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1216061 Bug ID: 1216061 Summary: Syntax error in update_postmaps script Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: noreply.section+dev(a)gmail.com QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- If POSTFIX_UPDATE_MAPS="no" in /etc/sysconfig/postfix, starting postfix generates the error: /usr/lib/postfix/systemd/update_postmaps: line 14: return: can only `return' from a function or sourced script -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1215062] New: Ctrl+Alt+B in lokalize no longer works
by bugzilla_noreply＠suse.com 22 Jan '24

22 Jan '24

https://bugzilla.suse.com/show_bug.cgi?id=1215062 Bug ID: 1215062 Summary: Ctrl+Alt+B in lokalize no longer works Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: KDE Applications Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: freek(a)opensuse.org QA Contact: qa-bugs(a)suse.de Target Milestone: --- Found By: --- Blocker: --- I an using tumbleweed:20230902 and since a few days Ctrl+Alt+B in lokalize to insert exact matches in fuzzy or empty elements in a .po file no longer works. When I walk through these elements the Translation Memory shows exact translations (100%), but they are not inserted using Ctrl+Alt+B. I have to use Ctrl+1 to copy the translation from TM into the element. -- You are receiving this mail because: You are on the CC list for the bug.

1 1