February 2022 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1184069] New: GRUB on a crypted partition takes > 10 seconds to unlock the filesystem
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1184069 Bug ID: 1184069 Summary: GRUB on a crypted partition takes > 10 seconds to unlock the filesystem Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader Assignee: screening-team-bugs(a)suse.de Reporter: p.heinlein(a)heinlein-support.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I installed 15.2 plain vanilla on a Thinkpad X1.Extreme Gen.3 with a ~2 TB NVME and I set a crypto disc password during installation (in YaST). Grub needs > 10 seconds to unlock the key, so booting is very slow. It's very similar to https://unix.stackexchange.com/questions/369414/grub-takes-too-long-to-unlo… https://bbs.archlinux.org/viewtopic.php?id=228865 so I also think, that the crypto or number of iterations is way to expensive here and needs too much time. Maybe the SUSE team should/could look for a similar safe, but faster method (SHA256?) here? -- You are receiving this mail because: You are on the CC list for the bug.

1 16

[Bug 1190738] New: kernel-default-base does not contain kernel changelog
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1190738 Bug ID: 1190738 Summary: kernel-default-base does not contain kernel changelog Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: fvogt(a)suse.com QA Contact: qa-bugs(a)suse.de CC: jeos-internal(a)suse.de Found By: --- Blocker: --- kernel-default-base is built from a separate set of .spec and .changes files, making use of the kernel-subpackage facilities. This however means that the changelog of the original kernel packages (kernel-default, -vanilla, etc.) does not end up in the changelog of kernel-default-base. This is especially visible in updates, which only change the binary content and the version number in an unobvious way. There is no mention of any relevant fixed bugs (bsc#, CVE-). It would be very useful to include the kernel changelog in the kernel-default-base package. I don't think it can (or should) be interleaved with the subpackage .changes file, but it could be included as file. The target systems usually have excludedocs enabled though, so marking the file as %doc means it won't get installed. That makes it more complex and annoying... -- You are receiving this mail because: You are on the CC list for the bug.

1 7

[Bug 1176026] New: bond interface should not invent mac address by default
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1176026 Bug ID: 1176026 Summary: bond interface should not invent mac address by default Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: ro(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- since 5.8.4 (unsure about last digit): when setting up a bond if kernel chooses a random mac removing and readding the slave gets back to the used behaviour: obs-arm-1:~ # modprobe bonding 3: enP2p1s0v1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether 1c:1b:0d:60:ee:8b brd ff:ff:ff:ff:ff:ff 7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 9e:29:55:da:aa:0e brd ff:ff:ff:ff:ff:ff obs-arm-1:~ # echo +enP2p1s0v1 > /sys/class/net/bond0/bonding/slaves 7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 9e:29:55:da:aa:0e brd ff:ff:ff:ff:ff:ff obs-arm-1:~ # echo -enP2p1s0v1 > /sys/class/net/bond0/bonding/slaves obs-arm-1:~ # echo +enP2p1s0v1 > /sys/class/net/bond0/bonding/slaves 7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 1c:1b:0d:60:ee:8b brd ff:ff:ff:ff:ff:ff -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1193417] New: using a Bluetooth keyboard slows down going to sleep for a few seconds
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1193417 Bug ID: 1193417 Summary: using a Bluetooth keyboard slows down going to sleep for a few seconds Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: suse(a)rop.cx QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- when I have a Bluetooth keyboard connected and I press the switch to sleep mode, then at first the screen simply locks, stays in this state for about 4-6 seconds and only then goes to sleep mode Kernel logs: 06/12/2021 01:57 systemd-logind Power key pressed. 06/12/2021 01:57 dbus-daemon [session uid=1000 pid=1840] Activating service name='org.kde.LogoutPrompt' requested by ':1.13' (uid=1000 pid=1991 comm="/usr/bin/ksmserver ") 06/12/2021 01:57 dbus-daemon [session uid=1000 pid=1840] Successfully activated service 'org.kde.LogoutPrompt' 06/12/2021 01:57 NetworkManager <info> [1638745075.7552] manager: sleep: sleep requested (sleeping: no enabled: yes) 06/12/2021 01:57 ModemManager <info> [sleep-monitor] system is about to suspend 06/12/2021 01:57 kded5 bluedevil: About to suspend 06/12/2021 01:57 kded5 plasma-nm: Unhandled active connection state change: 3 06/12/2021 01:57 dbus-daemon [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=1166 comm="/usr/sbin/NetworkManager --no-daemon ") 06/12/2021 01:57 dbus-daemon [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.53' (uid=1000 pid=2018 comm="/usr/bin/plasmashell ") 06/12/2021 01:57 systemd Starting Network Manager Script Dispatcher Service... 06/12/2021 01:57 systemd Starting PackageKit Daemon... 06/12/2021 01:57 PackageKit daemon start 06/12/2021 01:57 dbus-daemon [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 06/12/2021 01:57 systemd Started Network Manager Script Dispatcher Service. 06/12/2021 01:57 kernel wlp0s20f3: deauthenticating from f8:f0:82:6d:a9:5a by local choice (Reason: 3=DEAUTH_LEAVING) 06/12/2021 01:57 dbus-daemon [system] Successfully activated service 'org.freedesktop.PackageKit' 06/12/2021 01:57 plasmashell plasma-pk-updates: Daemon changed 06/12/2021 01:57 kscreenlocker_greet Qt: Session management error: networkIdsList argument is NULL 06/12/2021 01:57 kded5 plasma-nm: Not emitting connection deactivated notification as we're about to suspend 06/12/2021 01:57 kded5 plasma-nm: Network connectivity limited, scheduling notification 06/12/2021 01:57 kscreenlocker_greet file:///usr/share/plasma/look-and-feel/org.kde.breeze.desktop/contents/components/UserList.qml:47:9: Unable to assign [undefined] to bool 06/12/2021 01:57 systemd Reached target Sleep. 06/12/2021 01:57 systemd Starting System Suspend... 06/12/2021 01:57 kscreenlocker_greet file:///usr/share/plasma/look-and-feel/org.kde.breeze.desktop/contents/lockscreen/LockScreenUi.qml:535: TypeError: Cannot read property 'longName' of undefined 06/12/2021 01:57 systemd-sleep INFO: Skip running /usr/lib/systemd/system-sleep/grub2.sleep for suspend 06/12/2021 01:57 systemd-sleep Entering sleep state 'suspend'... 06/12/2021 01:57 kernel PM: suspend entry (s2idle) 06/12/2021 01:57 kernel Filesystems sync: 0.008 seconds 06/12/2021 01:57 kscreenlocker_greet qt.virtualkeyboard.hunspell: Hunspell dictionary is missing for "en_GB" . Search paths ("/usr/share/qt5/qtvirtualkeyboard/hunspell", "/usr/share/hunspell", "/usr/share/myspell/dicts") 06/12/2021 01:57 org_kde_powerdevil QObject::disconnect: Unexpected nullptr parameter 06/12/2021 01:57 org_kde_powerdevil QObject::disconnect: Unexpected nullptr parameter 06/12/2021 02:00 kernel Bluetooth: hci0: Timed out waiting for suspend events 06/12/2021 02:00 kernel Bluetooth: hci0: Suspend timeout bit: 6 06/12/2021 02:00 kernel Bluetooth: hci0: Suspend notifier action (3) failed: -110 06/12/2021 02:00 kernel Freezing user space processes ... (elapsed 0.003 seconds) done. 06/12/2021 02:00 kernel OOM killer disabled. 06/12/2021 02:00 kernel Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. 06/12/2021 02:00 kernel printk: Suspending console(s) (use no_console_suspend to debug) 06/12/2021 02:00 kernel ACPI: EC: interrupt blocked 06/12/2021 02:00 kernel ACPI: EC: interrupt unblocked 06/12/2021 02:00 kernel OOM killer enabled. 06/12/2021 02:00 kernel Restarting tasks ... 06/12/2021 02:00 kernel mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) 06/12/2021 02:00 bluetoothd Controller resume with wake event 0x0 06/12/2021 02:00 systemd-sleep System returned from sleep state. 06/12/2021 02:00 systemd Started Timeline of Snapper Snapshots. 06/12/2021 02:00 kernel done. 06/12/2021 02:00 kernel PM: suspend exit 06/12/2021 02:00 systemd-sleep INFO: Skip running /usr/lib/systemd/system-sleep/grub2.sleep for suspend 06/12/2021 02:00 systemd systemd-suspend.service: Deactivated successfully. 06/12/2021 02:00 systemd Finished System Suspend. 06/12/2021 02:00 systemd Stopped target Sleep. 06/12/2021 02:00 systemd Reached target Suspend. 06/12/2021 02:00 systemd Stopped target Suspend. 06/12/2021 02:00 systemd-logind Operation 'sleep' finished. So, probably problem in: 06/12/2021 02:00 kernel Bluetooth: hci0: Timed out waiting for suspend events 06/12/2021 02:00 kernel Bluetooth: hci0: Suspend timeout bit: 6 06/12/2021 02:00 kernel Bluetooth: hci0: Suspend notifier action (3) failed: -110 (timed out) -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1190411] New: USB devices missing after kexec reboot with XHCI enabled
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1190411 Bug ID: 1190411 Summary: USB devices missing after kexec reboot with XHCI enabled Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: roger.whittaker(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 852446 --> https://bugzilla.suse.com/attachment.cgi?id=852446&action=edit hwinfo, dmesg, usb-devices and lsusb with and without XHCI enabled in BIOS, normal boot and kexec boot Hardware is an Intel NUC (D54250WYK). With XHCI enabled in the UEFI BIOS, USB devices are not available after a kexec reboot. Hence the boot failed in the initrd when I had USB attached disks referenced in /etc/fstab. When I commented these out, the boot succeeded but the keyboard and mouse did not work after a kexec reboot. With XHCI disabled in the BIOS, kexec works as expected. On this hardware using Tumbleweed at some time in the past (but I'm afraid I don't know when) kexec worked with XHCI enabled. Linux jabberwock 5.14.0-1-default #1 SMP Mon Aug 30 07:01:36 UTC 2021 (dc06e24) x86_64 x86_64 x86_64 GNU/Linux NAME="openSUSE Tumbleweed" # VERSION="20210908" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20210908" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20210908" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" DOCUMENTATION_URL="https://en.opensuse.org/Portal:Tumbleweed" LOGO="distributor-logo" -- You are receiving this mail because: You are on the CC list for the bug.

1 27

[Bug 1194187] New: openssl broken
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1194187 Bug ID: 1194187 Summary: openssl broken Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Security Assignee: security-team(a)suse.de Reporter: mrueckert(a)suse.com QA Contact: qa-bugs(a)suse.de CC: dleuenberger(a)suse.com Found By: --- Blocker: --- found this while debugging why my dehydrated job is erroring out. up2date Tumbleweed rpm -qa \*openssl\* libopenssl1_0_0-1.0.2u-6.2.x86_64 libopenssl1_0_0-steam-1.0.2u-6.2.x86_64 libopenssl1_0_0-steam-32bit-1.0.2u-6.2.x86_64 libopenssl1_1-32bit-1.1.1l-4.1.x86_64 openssl-1_1-1.1.1l-4.1.x86_64 libopenssl1_1-1.1.1l-4.1.x86_64 openssl-1.1.1l-1.2.noarch ``` Error configuring OpenSSL modules 139707710848960:error:08064066:object identifier routines:OBJ_create:oid exists:crypto/objects/obj_dat.c:698: 139707710848960:error:0D0AE0AB:asn1 encoding routines:oid_module_init:adding object:crypto/asn1/asn_moid.c:38: 139707710848960:error:0E07606D:configuration file routines:module_run:module initialization error:crypto/conf/conf_mod.c:177:module=oid_section, value=new_oids, retcode=-1 ``` -- You are receiving this mail because: You are on the CC list for the bug.

1 11

[Bug 1188589] New: libbpf: failed to find valid kernel BTF
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1188589 Bug ID: 1188589 Summary: libbpf: failed to find valid kernel BTF Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: mrostecki(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Since the update to the TW snapshot with the kernel 5.13.2-1, I see the following errors when trying to load BPF CO-RE skeletons with libbpf: libbpf: failed to find valid kernel BTF libbpf: Error loading vmlinux BTF: -3 The full example - I'm trying to load BPF programs which I have in this project: https://github.com/rancher-sandbox/lockc and the full output is: �� sudo ./out/lockcd libbpf: elf: skipping unrecognized data section(9) .rodata.str1.1 libbpf: failed to find valid kernel BTF libbpf: Error loading vmlinux BTF: -3 libbpf: failed to load object 'lockc_bpf' libbpf: failed to load BPF skeleton 'lockc_bpf': -3 Error: libbpf error Caused by: System error, errno: 3 Most likely, the solution for them would be setting the following kernel parameters to "y": CONFIG_DEBUG_INFO_REDUCED CONFIG_DEBUG_INFO_SPLIT But I'm not entirely sure yet. trying to test that... -- You are receiving this mail because: You are on the CC list for the bug.

1 9

[Bug 1190539] New: scsi host0: uas_eh_device_reset_handler
by bugzilla_noreply＠suse.com 25 Jan '23

25 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1190539 Bug ID: 1190539 Summary: scsi host0: uas_eh_device_reset_handler Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: mkrapp(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I got a new ASUS Zenbook 14 UM524UA. It has two USB-c and one USB-A sockets. An external SATA M2 disk connected to the USB-A Port does not mount, but uas_device_reset happens frequently and the disk is not usable: 22:43:03 susi kernel: usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd 22:43:03 susi kernel: usb 4-2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00 22:43:03 susi kernel: usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 22:43:03 susi kernel: usb 4-2: Product: ASM105x 22:43:03 susi kernel: usb 4-2: Manufacturer: ASMT 22:43:03 susi kernel: usb 4-2: SerialNumber: ACDFD0000000000007B4 22:43:03 susi kernel: scsi host0: uas 22:43:03 susi kernel: scsi 0:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6 22:43:03 susi kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 22:43:03 susi kernel: sd 0:0:0:0: [sda] 937721856 512-byte logical blocks: (480 GB/447 GiB) 22:43:03 susi kernel: sd 0:0:0:0: [sda] Write Protect is off 22:43:03 susi kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 22:43:03 susi kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 22:43:03 susi kernel: sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes 22:43:03 susi kernel: sda: sda1 22:43:03 susi kernel: sd 0:0:0:0: [sda] Attached SCSI disk 22:43:36 susi kernel: sd 0:0:0:0: [sda] tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 22:43:36 susi kernel: sd 0:0:0:0: [sda] tag#16 CDB: Read(10) 28 00 00 00 00 78 00 00 08 00 22:43:36 susi kernel: scsi host0: uas_eh_device_reset_handler start 22:43:36 susi kernel: usb 4-2: reset SuperSpeed USB device number 6 using xhci_hcd 22:43:36 susi kernel: scsi host0: uas_eh_device_reset_handler success 22:44:04 susi systemd-udevd[713]: sda: Worker [14902] processing SEQNUM=4825 is taking a long time 22:44:06 susi kernel: sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN 22:44:06 susi kernel: sd 0:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00 22:44:06 susi kernel: sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN 22:44:06 susi kernel: sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00 22:44:06 susi kernel: sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN 22:44:06 susi kernel: sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 00 48 00 00 30 00 22:44:07 susi kernel: scsi host0: uas_eh_device_reset_handler start 22:44:07 susi kernel: usb 4-2: reset SuperSpeed USB device number 6 using xhci_hcd 22:44:07 susi kernel: scsi host0: uas_eh_device_reset_handler success 22:44:37 susi kernel: scsi host0: uas_eh_device_reset_handler start 22:44:37 susi kernel: sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD 22:44:37 susi kernel: sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00 22:44:37 susi kernel: sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD 22:44:37 susi kernel: sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00 22:44:37 susi kernel: usb 4-2: reset SuperSpeed USB device number 6 using xhci_hcd 22:44:37 susi kernel: scsi host0: uas_eh_device_reset_handler success 22:45:08 susi kernel: scsi host0: uas_eh_device_reset_handler start 22:45:08 susi kernel: sd 0:0:0:0: [sda] tag#3 uas_zap_pending 0 uas-tag 1 inflight: CMD 22:45:08 susi kernel: sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00 22:45:08 susi kernel: sd 0:0:0:0: [sda] tag#5 uas_zap_pending 0 uas-tag 2 inflight: CMD 22:45:08 susi kernel: sd 0:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00 22:45:08 susi kernel: usb 4-2: reset SuperSpeed USB device number 6 using xhci_hcd 22:45:08 susi kernel: scsi host0: uas_eh_device_reset_handler success /dev/sda1 is not mountable (xfs) and fdisk hangs, disk is not usable -- You are receiving this mail because: You are on the CC list for the bug.

1 6

[Bug 1190058] New: Unable to handle kernel paging request at virtual address ffff8000156dc028
by bugzilla_noreply＠suse.com 24 Jan '23

24 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1190058 Bug ID: 1190058 Summary: Unable to handle kernel paging request at virtual address ffff8000156dc028 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: aarch64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: schwab(a)suse.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Loading Linux 5.13.12-2-default ... Loading initial ramdisk ... EFI stub: Booting Linux Kernel... EFI stub: EFI_RNG_PROTOCOL unavailable EFI stub: ERROR: FIRMWARE BUG: kernel image not aligned on 64k boundary EFI stub: ERROR: FIRMWARE BUG: Image BSS overlaps adjacent EFI memory region EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x431f0a10] [ 0.000000] Linux version 5.13.12-2-default (geeko@buildhost) (gcc (SUSE Linux) 11.2.1 20210816 [revision 056e324ce46a7924b5cf10f61010cf9dd2ca10e9], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.36.1.20210326-4) #1 SMP Fri Aug 20 07:04:28 UTC 2021 (33df9c6) [ 0.000000] Machine model: cavium,thunder-88xx [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0x1ffdb2fd18 SMBIOS 3.0=0x1ffbe7f998 ACPI 2.0=0x1ff24a0000 MEMRESERVE=0x1ff2510d98 [ 0.000000] esrt: Reserving ESRT space from 0x0000001ffdb2fd18 to 0x0000001ffdb2fd50. [ 0.000000] NUMA: NODE_DATA [mem 0x1fed056480-0x1fed05afff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000500000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000001fff0fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000500000-0x0000000000cfffff] [ 0.000000] node 0: [mem 0x0000000000d00000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101d3fff] [ 0.000000] node 0: [mem 0x00000000101d5000-0x00000000fffbffff] [ 0.000000] node 0: [mem 0x00000000fffc0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000001ff247ffff] [ 0.000000] node 0: [mem 0x0000001ff2480000-0x0000001ff249ffff] [ 0.000000] node 0: [mem 0x0000001ff24a0000-0x0000001ff252ffff] [ 0.000000] node 0: [mem 0x0000001ff2530000-0x0000001ff254ffff] [ 0.000000] node 0: [mem 0x0000001ff2550000-0x0000001ff972ffff] [ 0.000000] node 0: [mem 0x0000001ff9730000-0x0000001ff9c0ffff] [ 0.000000] node 0: [mem 0x0000001ff9c10000-0x0000001ffb5affff] [ 0.000000] node 0: [mem 0x0000001ffb5b0000-0x0000001ffd00ffff] [ 0.000000] node 0: [mem 0x0000001ffd010000-0x0000001ffeb9ffff] [ 0.000000] node 0: [mem 0x0000001ffeba0000-0x0000001ffebfffff] [ 0.000000] node 0: [mem 0x0000001ffec00000-0x0000001fff0fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000500000-0x0000001fff0fffff] [ 0.000000] On node 0 totalpages: 33549311 [ 0.000000] DMA zone: 16364 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1047295 pages, LIFO batch:63 [ 0.000000] Normal zone: 507844 pages used for memmap [ 0.000000] Normal zone: 32502016 pages, LIFO batch:63 [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS resident on physical CPU 0x0 [ 0.000000] percpu: Embedded 33 pages/cpu s97496 r8192 d29480 u135168 [ 0.000000] pcpu-alloc: s97496 r8192 d29480 u135168 alloc=33*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 [ 0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 [ 0.000000] pcpu-alloc: [0] 32 [0] 33 [0] 34 [0] 35 [0] 36 [0] 37 [0] 38 [0] 39 [ 0.000000] pcpu-alloc: [0] 40 [0] 41 [0] 42 [0] 43 [0] 44 [0] 45 [0] 46 [0] 47 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Software prefetching using PRFM [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Cavium erratum 27456 [ 0.000000] CPU features: detected: Cavium erratum 30115 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 33025103 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-5.13.12-2-default root=UUID=9b635036-2655-4d9a-918d-686308f3a2f5 console=ttyAMA0,115200 ignore_loglevel mitigations=auto [ 0.000000] printk: log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 1540096 bytes [ 0.000000] printk: log_buf_len min size: 262144 bytes [ 0.000000] printk: log_buf_len: 2097152 bytes [ 0.000000] printk: early log buf free: 257936(98%) [ 0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfc0000-0x00000000fffc0000] (64MB) [ 0.000000] Memory: 4244396K/134197244K available (14080K kernel code, 3394K rwdata, 11648K rodata, 6912K init, 1607K bss, 2642620K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x550 with crng_init=0 [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=48, Nodes=1 [ 0.000000] ftrace: allocating 45114 entries in 177 pages [ 0.000000] ftrace: allocated 177 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=480 to nr_cpu_ids=48. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=48 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GIC: enabling workaround for GICv3: Cavium erratum 38539 [ 0.000000] GICv3: 128 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000801080000000 [ 0.000000] ITS [mem 0x801000020000-0x80100021ffff] [ 0.000000] ITS@0x0000801000020000: Devices Table too large, reduce ids 21->19 [ 0.000000] ITS@0x0000801000020000: allocated 524288 Devices @100800000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] GICv3: using LPI property table @0x0000000100260000 [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100270000 [ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns [ 0.000000] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns [ 0.000266] Console: colour dummy device 80x25 [ 0.000346] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=1000000) [ 0.000357] pid_max: default: 49152 minimum: 384 [ 0.000486] LSM: Security Framework initializing [ 0.000550] AppArmor: AppArmor initialized [ 0.000686] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000744] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.019172] rcu: Hierarchical SRCU implementation. [ 0.019921] Platform MSI: gic-its@801000020000 domain created [ 0.019993] PCI/MSI: /interrupt-controller@801000000000/gic-its@801000020000 domain created [ 0.020052] fsl-mc MSI: gic-its@801000020000 domain created [ 0.020665] Remapping and enabling EFI services. [ 0.023404] smp: Bringing up secondary CPUs ... [ 0.023863] Detected VIPT I-cache on CPU1 [ 0.023879] GICv3: CPU1: found redistributor 1 region 0:0x0000801080020000 [ 0.023901] GICv3: CPU1: using allocated LPI pending table @0x0000000100280000 [ 0.023924] CPU1: Booted secondary processor 0x0000000001 [0x431f0a10] [ 0.024456] Detected VIPT I-cache on CPU2 [ 0.024468] GICv3: CPU2: found redistributor 2 region 0:0x0000801080040000 [ 0.024489] GICv3: CPU2: using allocated LPI pending table @0x0000000100290000 [ 0.024510] CPU2: Booted secondary processor 0x0000000002 [0x431f0a10] [ 0.025021] Detected VIPT I-cache on CPU3 [ 0.025033] GICv3: CPU3: found redistributor 3 region 0:0x0000801080060000 [ 0.025055] GICv3: CPU3: using allocated LPI pending table @0x00000001002a0000 [ 0.025076] CPU3: Booted secondary processor 0x0000000003 [0x431f0a10] [ 0.025591] Detected VIPT I-cache on CPU4 [ 0.025603] GICv3: CPU4: found redistributor 4 region 0:0x0000801080080000 [ 0.025624] GICv3: CPU4: using allocated LPI pending table @0x00000001002b0000 [ 0.025645] CPU4: Booted secondary processor 0x0000000004 [0x431f0a10] [ 0.026157] Detected VIPT I-cache on CPU5 [ 0.026169] GICv3: CPU5: found redistributor 5 region 0:0x00008010800a0000 [ 0.026191] GICv3: CPU5: using allocated LPI pending table @0x00000001002c0000 [ 0.026213] CPU5: Booted secondary processor 0x0000000005 [0x431f0a10] [ 0.026730] Detected VIPT I-cache on CPU6 [ 0.026742] GICv3: CPU6: found redistributor 6 region 0:0x00008010800c0000 [ 0.026764] GICv3: CPU6: using allocated LPI pending table @0x00000001002d0000 [ 0.026786] CPU6: Booted secondary processor 0x0000000006 [0x431f0a10] [ 0.027297] Detected VIPT I-cache on CPU7 [ 0.027310] GICv3: CPU7: found redistributor 7 region 0:0x00008010800e0000 [ 0.027333] GICv3: CPU7: using allocated LPI pending table @0x00000001002e0000 [ 0.027355] CPU7: Booted secondary processor 0x0000000007 [0x431f0a10] [ 0.027872] Detected VIPT I-cache on CPU8 [ 0.027885] GICv3: CPU8: found redistributor 8 region 0:0x0000801080100000 [ 0.027907] GICv3: CPU8: using allocated LPI pending table @0x00000001002f0000 [ 0.027930] CPU8: Booted secondary processor 0x0000000008 [0x431f0a10] [ 0.028446] Detected VIPT I-cache on CPU9 [ 0.028459] GICv3: CPU9: found redistributor 9 region 0:0x0000801080120000 [ 0.028481] GICv3: CPU9: using allocated LPI pending table @0x0000000100300000 [ 0.028504] CPU9: Booted secondary processor 0x0000000009 [0x431f0a10] [ 0.029035] Detected VIPT I-cache on CPU10 [ 0.029048] GICv3: CPU10: found redistributor a region 0:0x0000801080140000 [ 0.029070] GICv3: CPU10: using allocated LPI pending table @0x0000000100310000 [ 0.029093] CPU10: Booted secondary processor 0x000000000a [0x431f0a10] [ 0.029607] Detected VIPT I-cache on CPU11 [ 0.029621] GICv3: CPU11: found redistributor b region 0:0x0000801080160000 [ 0.029644] GICv3: CPU11: using allocated LPI pending table @0x0000000100320000 [ 0.029667] CPU11: Booted secondary processor 0x000000000b [0x431f0a10] [ 0.030216] Detected VIPT I-cache on CPU12 [ 0.030229] GICv3: CPU12: found redistributor c region 0:0x0000801080180000 [ 0.030253] GICv3: CPU12: using allocated LPI pending table @0x0000000100330000 [ 0.030276] CPU12: Booted secondary processor 0x000000000c [0x431f0a10] [ 0.030791] Detected VIPT I-cache on CPU13 [ 0.030805] GICv3: CPU13: found redistributor d region 0:0x00008010801a0000 [ 0.030828] GICv3: CPU13: using allocated LPI pending table @0x0000000100340000 [ 0.030852] CPU13: Booted secondary processor 0x000000000d [0x431f0a10] [ 0.031377] Detected VIPT I-cache on CPU14 [ 0.031391] GICv3: CPU14: found redistributor e region 0:0x00008010801c0000 [ 0.031414] GICv3: CPU14: using allocated LPI pending table @0x0000000100350000 [ 0.031438] CPU14: Booted secondary processor 0x000000000e [0x431f0a10] [ 0.031960] Detected VIPT I-cache on CPU15 [ 0.031974] GICv3: CPU15: found redistributor f region 0:0x00008010801e0000 [ 0.031998] GICv3: CPU15: using allocated LPI pending table @0x0000000100360000 [ 0.032023] CPU15: Booted secondary processor 0x000000000f [0x431f0a10] [ 0.032548] Detected VIPT I-cache on CPU16 [ 0.032563] GICv3: CPU16: found redistributor 100 region 0:0x0000801080200000 [ 0.032587] GICv3: CPU16: using allocated LPI pending table @0x0000000100370000 [ 0.032611] CPU16: Booted secondary processor 0x0000000100 [0x431f0a10] [ 0.033134] Detected VIPT I-cache on CPU17 [ 0.033149] GICv3: CPU17: found redistributor 101 region 0:0x0000801080220000 [ 0.033172] GICv3: CPU17: using allocated LPI pending table @0x0000000100380000 [ 0.033197] CPU17: Booted secondary processor 0x0000000101 [0x431f0a10] [ 0.033726] Detected VIPT I-cache on CPU18 [ 0.033741] GICv3: CPU18: found redistributor 102 region 0:0x0000801080240000 [ 0.033765] GICv3: CPU18: using allocated LPI pending table @0x0000000100390000 [ 0.033790] CPU18: Booted secondary processor 0x0000000102 [0x431f0a10] [ 0.034309] Detected VIPT I-cache on CPU19 [ 0.034325] GICv3: CPU19: found redistributor 103 region 0:0x0000801080260000 [ 0.034349] GICv3: CPU19: using allocated LPI pending table @0x00000001003a0000 [ 0.034375] CPU19: Booted secondary processor 0x0000000103 [0x431f0a10] [ 0.034897] Detected VIPT I-cache on CPU20 [ 0.034912] GICv3: CPU20: found redistributor 104 region 0:0x0000801080280000 [ 0.034936] GICv3: CPU20: using allocated LPI pending table @0x00000001003b0000 [ 0.034962] CPU20: Booted secondary processor 0x0000000104 [0x431f0a10] [ 0.035484] Detected VIPT I-cache on CPU21 [ 0.035500] GICv3: CPU21: found redistributor 105 region 0:0x00008010802a0000 [ 0.035524] GICv3: CPU21: using allocated LPI pending table @0x00000001003c0000 [ 0.035551] CPU21: Booted secondary processor 0x0000000105 [0x431f0a10] [ 0.036083] Detected VIPT I-cache on CPU22 [ 0.036099] GICv3: CPU22: found redistributor 106 region 0:0x00008010802c0000 [ 0.036124] GICv3: CPU22: using allocated LPI pending table @0x00000001003d0000 [ 0.036150] CPU22: Booted secondary processor 0x0000000106 [0x431f0a10] [ 0.036672] Detected VIPT I-cache on CPU23 [ 0.036688] GICv3: CPU23: found redistributor 107 region 0:0x00008010802e0000 [ 0.036713] GICv3: CPU23: using allocated LPI pending table @0x00000001003e0000 [ 0.036740] CPU23: Booted secondary processor 0x0000000107 [0x431f0a10] [ 0.037271] Detected VIPT I-cache on CPU24 [ 0.037287] GICv3: CPU24: found redistributor 108 region 0:0x0000801080300000 [ 0.037312] GICv3: CPU24: using allocated LPI pending table @0x00000001003f0000 [ 0.037339] CPU24: Booted secondary processor 0x0000000108 [0x431f0a10] [ 0.037859] Detected VIPT I-cache on CPU25 [ 0.037875] GICv3: CPU25: found redistributor 109 region 0:0x0000801080320000 [ 0.037900] GICv3: CPU25: using allocated LPI pending table @0x0000000100c00000 [ 0.037928] CPU25: Booted secondary processor 0x0000000109 [0x431f0a10] [ 0.038460] Detected VIPT I-cache on CPU26 [ 0.038476] GICv3: CPU26: found redistributor 10a region 0:0x0000801080340000 [ 0.038501] GICv3: CPU26: using allocated LPI pending table @0x0000000100c10000 [ 0.038529] CPU26: Booted secondary processor 0x000000010a [0x431f0a10] [ 0.039062] Detected VIPT I-cache on CPU27 [ 0.039079] GICv3: CPU27: found redistributor 10b region 0:0x0000801080360000 [ 0.039105] GICv3: CPU27: using allocated LPI pending table @0x0000000100c20000 [ 0.039132] CPU27: Booted secondary processor 0x000000010b [0x431f0a10] [ 0.039659] Detected VIPT I-cache on CPU28 [ 0.039676] GICv3: CPU28: found redistributor 10c region 0:0x0000801080380000 [ 0.039702] GICv3: CPU28: using allocated LPI pending table @0x0000000100c30000 [ 0.039730] CPU28: Booted secondary processor 0x000000010c [0x431f0a10] [ 0.040280] Detected VIPT I-cache on CPU29 [ 0.040297] GICv3: CPU29: found redistributor 10d region 0:0x00008010803a0000 [ 0.040324] GICv3: CPU29: using allocated LPI pending table @0x0000000100c40000 [ 0.040352] CPU29: Booted secondary processor 0x000000010d [0x431f0a10] [ 0.040889] Detected VIPT I-cache on CPU30 [ 0.040906] GICv3: CPU30: found redistributor 10e region 0:0x00008010803c0000 [ 0.040933] GICv3: CPU30: using allocated LPI pending table @0x0000000100c50000 [ 0.040961] CPU30: Booted secondary processor 0x000000010e [0x431f0a10] [ 0.041492] Detected VIPT I-cache on CPU31 [ 0.041510] GICv3: CPU31: found redistributor 10f region 0:0x00008010803e0000 [ 0.041536] GICv3: CPU31: using allocated LPI pending table @0x0000000100c60000 [ 0.041565] CPU31: Booted secondary processor 0x000000010f [0x431f0a10] [ 0.042095] Detected VIPT I-cache on CPU32 [ 0.042113] GICv3: CPU32: found redistributor 200 region 0:0x0000801080400000 [ 0.042139] GICv3: CPU32: using allocated LPI pending table @0x0000000100c70000 [ 0.042168] CPU32: Booted secondary processor 0x0000000200 [0x431f0a10] [ 0.042709] Detected VIPT I-cache on CPU33 [ 0.042727] GICv3: CPU33: found redistributor 201 region 0:0x0000801080420000 [ 0.042754] GICv3: CPU33: using allocated LPI pending table @0x0000000100c80000 [ 0.042784] CPU33: Booted secondary processor 0x0000000201 [0x431f0a10] [ 0.043320] Detected VIPT I-cache on CPU34 [ 0.043338] GICv3: CPU34: found redistributor 202 region 0:0x0000801080440000 [ 0.043365] GICv3: CPU34: using allocated LPI pending table @0x0000000100c90000 [ 0.043395] CPU34: Booted secondary processor 0x0000000202 [0x431f0a10] [ 0.043925] Detected VIPT I-cache on CPU35 [ 0.043944] GICv3: CPU35: found redistributor 203 region 0:0x0000801080460000 [ 0.043971] GICv3: CPU35: using allocated LPI pending table @0x0000000100ca0000 [ 0.044002] CPU35: Booted secondary processor 0x0000000203 [0x431f0a10] [ 0.044542] Detected VIPT I-cache on CPU36 [ 0.044561] GICv3: CPU36: found redistributor 204 region 0:0x0000801080480000 [ 0.044588] GICv3: CPU36: using allocated LPI pending table @0x0000000100cb0000 [ 0.044618] CPU36: Booted secondary processor 0x0000000204 [0x431f0a10] [ 0.045150] Detected VIPT I-cache on CPU37 [ 0.045169] GICv3: CPU37: found redistributor 205 region 0:0x00008010804a0000 [ 0.045197] GICv3: CPU37: using allocated LPI pending table @0x0000000100cc0000 [ 0.045228] CPU37: Booted secondary processor 0x0000000205 [0x431f0a10] [ 0.045769] Detected VIPT I-cache on CPU38 [ 0.045788] GICv3: CPU38: found redistributor 206 region 0:0x00008010804c0000 [ 0.045816] GICv3: CPU38: using allocated LPI pending table @0x0000000100cd0000 [ 0.045847] CPU38: Booted secondary processor 0x0000000206 [0x431f0a10] [ 0.046391] Detected VIPT I-cache on CPU39 [ 0.046411] GICv3: CPU39: found redistributor 207 region 0:0x00008010804e0000 [ 0.046438] GICv3: CPU39: using allocated LPI pending table @0x0000000100ce0000 [ 0.046470] CPU39: Booted secondary processor 0x0000000207 [0x431f0a10] [ 0.047006] Detected VIPT I-cache on CPU40 [ 0.047024] GICv3: CPU40: found redistributor 208 region 0:0x0000801080500000 [ 0.047052] GICv3: CPU40: using allocated LPI pending table @0x0000000100cf0000 [ 0.047084] CPU40: Booted secondary processor 0x0000000208 [0x431f0a10] [ 0.047621] Detected VIPT I-cache on CPU41 [ 0.047641] GICv3: CPU41: found redistributor 209 region 0:0x0000801080520000 [ 0.047668] GICv3: CPU41: using allocated LPI pending table @0x0000000100d00000 [ 0.047701] CPU41: Booted secondary processor 0x0000000209 [0x431f0a10] [ 0.048252] Detected VIPT I-cache on CPU42 [ 0.048271] GICv3: CPU42: found redistributor 20a region 0:0x0000801080540000 [ 0.048299] GICv3: CPU42: using allocated LPI pending table @0x0000000100d10000 [ 0.048332] CPU42: Booted secondary processor 0x000000020a [0x431f0a10] [ 0.048870] Detected VIPT I-cache on CPU43 [ 0.048890] GICv3: CPU43: found redistributor 20b region 0:0x0000801080560000 [ 0.048918] GICv3: CPU43: using allocated LPI pending table @0x0000000100d20000 [ 0.048950] CPU43: Booted secondary processor 0x000000020b [0x431f0a10] [ 0.049491] Detected VIPT I-cache on CPU44 [ 0.049510] GICv3: CPU44: found redistributor 20c region 0:0x0000801080580000 [ 0.049539] GICv3: CPU44: using allocated LPI pending table @0x0000000100d30000 [ 0.049571] CPU44: Booted secondary processor 0x000000020c [0x431f0a10] [ 0.050127] Detected VIPT I-cache on CPU45 [ 0.050148] GICv3: CPU45: found redistributor 20d region 0:0x00008010805a0000 [ 0.050176] GICv3: CPU45: using allocated LPI pending table @0x0000000100d40000 [ 0.050209] CPU45: Booted secondary processor 0x000000020d [0x431f0a10] [ 0.050760] Detected VIPT I-cache on CPU46 [ 0.050780] GICv3: CPU46: found redistributor 20e region 0:0x00008010805c0000 [ 0.050809] GICv3: CPU46: using allocated LPI pending table @0x0000000100d50000 [ 0.050842] CPU46: Booted secondary processor 0x000000020e [0x431f0a10] [ 0.051384] Detected VIPT I-cache on CPU47 [ 0.051405] GICv3: CPU47: found redistributor 20f region 0:0x00008010805e0000 [ 0.051433] GICv3: CPU47: using allocated LPI pending table @0x0000000100d60000 [ 0.051467] CPU47: Booted secondary processor 0x000000020f [0x431f0a10] [ 0.051574] smp: Brought up 1 node, 48 CPUs [ 0.051845] SMP: Total of 48 processors activated. [ 0.051852] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.051857] CPU features: detected: CRC32 instructions [ 1.476590] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 1.484926] CPU: All CPU(s) started at EL2 [ 1.485092] alternatives: patching kernel code [ 6.630500] node 0 deferred pages initialised in 5140ms [ 6.656888] devtmpfs: initialized [ 6.702287] Registered cp15_barrier emulation handler [ 6.702314] Registered setend emulation handler [ 6.702323] KASLR disabled due to lack of seed [ 6.702563] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 6.702593] futex hash table entries: 16384 (order: 8, 1048576 bytes, linear) [ 6.702961] pinctrl core: initialized pinctrl subsystem [ 6.703631] SMBIOS 3.0.0 present. [ 6.703650] DMI: Cavium ThunderX CRB/To be filled by O.E.M., BIOS 5.11 12/12/2012 [ 6.704180] NET: Registered protocol family 16 [ 6.705825] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 6.706079] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 6.706328] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 6.706359] audit: initializing netlink subsys (disabled) [ 6.706481] audit: type=2000 audit(5.280:1): state=initialized audit_enabled=0 res=1 [ 6.707124] thermal_sys: Registered thermal governor 'fair_share' [ 6.707130] thermal_sys: Registered thermal governor 'bang_bang' [ 6.707135] thermal_sys: Registered thermal governor 'step_wise' [ 6.707140] thermal_sys: Registered thermal governor 'user_space' [ 6.707351] cpuidle: using governor ladder [ 6.707523] cpuidle: using governor menu [ 6.707638] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 6.708154] ASID allocator initialised with 32768 entries [ 6.708916] Serial: AMBA PL011 UART driver [ 6.714312] 87e024000000.serial: ttyAMA0 at MMIO 0x87e024000000 (irq = 15, base_baud = 0) is a PL011 rev3 [ 8.794589] printk: console [ttyAMA0] enabled [ 8.799424] 87e025000000.serial: ttyAMA1 at MMIO 0x87e025000000 (irq = 16, base_baud = 0) is a PL011 rev3 [ 8.816002] OF: /soc@0/pci@848000000000: #msi-cells = 1 found -1 [ 8.822218] OF: /soc@0/pci@849000000000: #msi-cells = 1 found -1 [ 8.828384] OF: /soc@0/pci@84a000000000: #msi-cells = 1 found -1 [ 8.834556] OF: /soc@0/pci@84b000000000: #msi-cells = 1 found -1 [ 8.840734] OF: /soc@0/pci@87e0c0000000: #msi-cells = 1 found -1 [ 8.861572] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 8.868281] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 8.874973] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 8.881669] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 9.390424] wait_for_initramfs() called before rootfs_initcalls [ 9.410996] ACPI: Interpreter disabled. [ 9.415247] iommu: Default domain type: Passthrough [ 9.420333] vgaarb: loaded [ 9.423415] SCSI subsystem initialized [ 9.427316] libata version 3.00 loaded. [ 9.431286] pps_core: LinuxPPS API ver. 1 registered [ 9.436243] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 9.445384] PTP clock support registered [ 9.449362] EDAC MC: Ver: 3.0.0 [ 9.452570] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 9.458662] Registered efivars operations [ 9.463678] NetLabel: Initializing [ 9.467074] NetLabel: domain hash size = 128 [ 9.471434] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 9.477130] NetLabel: unlabeled traffic allowed by default [ 9.483163] clocksource: Switched to clocksource arch_sys_counter [ 9.526951] VFS: Disk quotas dquot_6.6.0 [ 9.530923] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 9.538304] AppArmor: AppArmor Filesystem Enabled [ 9.543037] pnp: PnP ACPI: disabled [ 9.552318] NET: Registered protocol family 2 [ 9.556840] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 9.569273] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 9.578759] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 9.588866] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 9.596681] TCP: Hash tables configured (established 524288 bind 65536) [ 9.603724] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear) [ 9.611978] UDP hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 9.620173] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 9.629353] NET: Registered protocol family 1 [ 9.633729] NET: Registered protocol family 44 [ 9.638172] PCI: CLS 0 bytes, default 64 [ 9.642293] Trying to unpack rootfs image as initramfs... [ 9.648381] hw perfevents: enabled with armv8_cavium_thunder PMU driver, 7 counters available [ 9.657109] kvm [1]: IPA Size Limit: 48 bits [ 9.663379] kvm [1]: GICv3: no GICV resource entry [ 9.668165] kvm [1]: disabling GICv2 emulation [ 9.672599] kvm [1]: GICv3 sysreg trapping enabled ([G0G1], reduced performance) [ 9.680029] kvm [1]: GIC system register CPU interface enabled [ 9.687038] kvm [1]: vgic interrupt IRQ9 [ 9.692549] kvm [1]: Hyp mode initialized successfully [ 9.700853] Initialise system trusted keyrings [ 9.705315] Key type blacklist registered [ 9.709468] workingset: timestamp_bits=40 max_order=25 bucket_order=0 [ 9.720674] zbud: loaded [ 9.724694] integrity: Platform Keyring initialized [ 9.755027] Key type asymmetric registered [ 9.759119] Asymmetric key parser 'x509' registered [ 9.764022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 9.771567] io scheduler mq-deadline registered [ 9.776102] io scheduler kyber registered [ 9.780257] io scheduler bfq registered [ 9.787105] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.794162] pci-host-generic 848000000000.pci: host bridge /soc@0/pci@848000000000 ranges: [ 9.802447] pci-host-generic 848000000000.pci: MEM 0x802000000000..0x807fffffffff -> 0x802000000000 [ 9.811941] pci-host-generic 848000000000.pci: MEM 0x838000000000..0x841fffffffff -> 0x838000000000 [ 9.821426] pci-host-generic 848000000000.pci: MEM 0x846000000000..0x847fffffffff -> 0x846000000000 [ 9.830913] pci-host-generic 848000000000.pci: MEM 0x868000000000..0x87e023ffffff -> 0x868000000000 [ 9.840405] pci-host-generic 848000000000.pci: MEM 0x87e026000000..0x87e0bfffffff -> 0x87e026000000 [ 9.849888] pci-host-generic 848000000000.pci: MEM 0x87e0c6000000..0x87ffffffffff -> 0x87e0c6000000 [ 9.859376] pci-host-generic 848000000000.pci: Memory resource size exceeds max for 32 bits [ 9.867721] pci-host-generic 848000000000.pci: Memory resource size exceeds max for 32 bits [ 9.876066] pci-host-generic 848000000000.pci: Memory resource size exceeds max for 32 bits [ 9.884410] pci-host-generic 848000000000.pci: Memory resource size exceeds max for 32 bits [ 9.892751] pci-host-generic 848000000000.pci: Memory resource size exceeds max for 32 bits [ 9.901119] pci-host-generic 848000000000.pci: ECAM at [mem 0x848000000000-0x848001ffffff] for [bus 00-1f] [ 9.910878] pci-host-generic 848000000000.pci: PCI host bridge to bus 0000:00 [ 9.918022] pci_bus 0000:00: root bus resource [bus 00-1f] [ 9.923503] pci_bus 0000:00: root bus resource [mem 0x802000000000-0x807fffffffff] [ 9.931065] pci_bus 0000:00: root bus resource [mem 0x838000000000-0x841fffffffff] [ 9.938630] pci_bus 0000:00: root bus resource [mem 0x846000000000-0x847fffffffff] [ 9.946210] pci_bus 0000:00: root bus resource [mem 0x868000000000-0x87e023ffffff] [ 9.953782] pci_bus 0000:00: root bus resource [mem 0x87e026000000-0x87e0bfffffff] [ 9.961343] pci_bus 0000:00: root bus resource [mem 0x87e0c6000000-0x87ffffffffff] [ 9.968997] pci 0000:00:01.0: [177d:a002] type 01 class 0x060400 [ 9.975467] pci 0000:00:09.0: [177d:a018] type 00 class 0x120000 [ 9.981493] pci 0000:00:09.0: BAR 0: [mem 0x87e040000000-0x87e0400fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 9.992455] pci 0000:00:09.0: VF BAR 0: [mem 0x840000800000-0x8400008fffff 64bit] (from Enhanced Allocation, properties 0x4) [ 11.033182] pci 0000:00:09.0: VF(n) BAR0 space: [mem 0x840000800000-0x8400008fffff 64bit] (contains BAR0 for 1 VFs) [ 11.044083] pci 0000:00:10.0: [177d:a01b] type 00 class 0x0c0330 [ 11.050115] pci 0000:00:10.0: BAR 0: [mem 0x868000000000-0x8680001fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.061075] pci 0000:00:10.0: BAR 4: [mem 0x868000200000-0x8680002fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.072198] pci 0000:00:11.0: [177d:a01b] type 00 class 0x0c0330 [ 11.078232] pci 0000:00:11.0: BAR 0: [mem 0x869000000000-0x8690001fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.089185] pci 0000:00:11.0: BAR 4: [mem 0x869000200000-0x8690002fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.100366] pci 0000:00:14.0: [177d:a002] type 01 class 0x060400 [ 11.106561] pci 0000:00:15.0: [177d:a002] type 01 class 0x060400 [ 11.112750] pci 0000:00:16.0: [177d:a002] type 01 class 0x060400 [ 11.119304] pci 0000:01:00.0: [177d:a001] type 00 class 0x088000 [ 11.125340] pci 0000:01:00.0: BAR 0: [mem 0x87e0fc000000-0x87e0fc0fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.136295] pci 0000:01:00.0: BAR 4: [mem 0x87e0fcf00000-0x87e0fcffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.147393] pci 0000:01:00.1: [177d:a00e] type 00 class 0x088000 [ 11.153431] pci 0000:01:00.1: BAR 0: [mem 0x87e006000000-0x87e0067fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.164384] pci 0000:01:00.1: BAR 4: [mem 0x87e006f00000-0x87e006ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.175469] pci 0000:01:01.3: [177d:a02b] type 00 class 0x0c8000 [ 11.181494] pci 0000:01:01.3: BAR 0: [mem 0x87e005000000-0x87e0057fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.192623] pci 0000:01:01.4: [177d:a010] type 00 class 0x058000 [ 11.198658] pci 0000:01:01.4: BAR 0: [mem 0x87e009000000-0x87e0097fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.209611] pci 0000:01:01.4: BAR 4: [mem 0x87e009f00000-0x87e009ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.220705] pci 0000:01:06.0: [177d:a02e] type 00 class 0x058000 [ 11.226741] pci 0000:01:06.0: BAR 0: [mem 0x87e050000000-0x87e0507fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.237694] pci 0000:01:06.0: BAR 4: [mem 0x87e050f00000-0x87e050ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.248796] pci 0000:01:06.1: [177d:a02e] type 00 class 0x058000 [ 11.254832] pci 0000:01:06.1: BAR 0: [mem 0x87e051000000-0x87e0517fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.265785] pci 0000:01:06.1: BAR 4: [mem 0x87e051f00000-0x87e051ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.276880] pci 0000:01:06.2: [177d:a02e] type 00 class 0x058000 [ 11.282906] pci 0000:01:06.2: BAR 0: [mem 0x87e052000000-0x87e0527fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.293865] pci 0000:01:06.2: BAR 4: [mem 0x87e052f00000-0x87e052ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.304957] pci 0000:01:06.3: [177d:a02e] type 00 class 0x058000 [ 11.310983] pci 0000:01:06.3: BAR 0: [mem 0x87e053000000-0x87e0537fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.321942] pci 0000:01:06.3: BAR 4: [mem 0x87e053f00000-0x87e053ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.333035] pci 0000:01:06.4: [177d:a02e] type 00 class 0x058000 [ 11.339070] pci 0000:01:06.4: BAR 0: [mem 0x87e054000000-0x87e0547fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.350023] pci 0000:01:06.4: BAR 4: [mem 0x87e054f00000-0x87e054ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.361117] pci 0000:01:06.5: [177d:a02e] type 00 class 0x058000 [ 11.367161] pci 0000:01:06.5: BAR 0: [mem 0x87e055000000-0x87e0557fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.378118] pci 0000:01:06.5: BAR 4: [mem 0x87e055f00000-0x87e055ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.389212] pci 0000:01:06.6: [177d:a02e] type 00 class 0x058000 [ 11.395248] pci 0000:01:06.6: BAR 0: [mem 0x87e056000000-0x87e0567fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.406200] pci 0000:01:06.6: BAR 4: [mem 0x87e056f00000-0x87e056ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.417296] pci 0000:01:06.7: [177d:a02e] type 00 class 0x058000 [ 11.423331] pci 0000:01:06.7: BAR 0: [mem 0x87e057000000-0x87e0577fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.434284] pci 0000:01:06.7: BAR 4: [mem 0x87e057f00000-0x87e057ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.445386] pci 0000:01:07.0: [177d:a02f] type 00 class 0x058000 [ 11.451412] pci 0000:01:07.0: BAR 0: [mem 0x87e058000000-0x87e0587fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.462371] pci 0000:01:07.0: BAR 4: [mem 0x87e058f00000-0x87e058ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.473471] pci 0000:01:07.1: [177d:a02f] type 00 class 0x058000 [ 11.479497] pci 0000:01:07.1: BAR 0: [mem 0x87e059000000-0x87e0597fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.490457] pci 0000:01:07.1: BAR 4: [mem 0x87e059f00000-0x87e059ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.501552] pci 0000:01:07.2: [177d:a02f] type 00 class 0x058000 [ 11.507595] pci 0000:01:07.2: BAR 0: [mem 0x87e05a000000-0x87e05a7fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.518554] pci 0000:01:07.2: BAR 4: [mem 0x87e05af00000-0x87e05affffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.529649] pci 0000:01:07.3: [177d:a02f] type 00 class 0x058000 [ 11.535692] pci 0000:01:07.3: BAR 0: [mem 0x87e05b000000-0x87e05b7fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.546650] pci 0000:01:07.3: BAR 4: [mem 0x87e05bf00000-0x87e05bffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.557746] pci 0000:01:07.4: [177d:a030] type 00 class 0x058000 [ 11.563781] pci 0000:01:07.4: BAR 0: [mem 0x87e05c000000-0x87e05c7fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.574734] pci 0000:01:07.4: BAR 4: [mem 0x87e05cf00000-0x87e05cffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.585826] pci 0000:01:07.5: [177d:a030] type 00 class 0x058000 [ 11.591851] pci 0000:01:07.5: BAR 0: [mem 0x87e05d000000-0x87e05d7fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.602811] pci 0000:01:07.5: BAR 4: [mem 0x87e05df00000-0x87e05dffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.613903] pci 0000:01:07.6: [177d:a030] type 00 class 0x058000 [ 11.619929] pci 0000:01:07.6: BAR 0: [mem 0x87e05e000000-0x87e05e7fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.630889] pci 0000:01:07.6: BAR 4: [mem 0x87e05ef00000-0x87e05effffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.641986] pci 0000:01:07.7: [177d:a030] type 00 class 0x058000 [ 11.648021] pci 0000:01:07.7: BAR 0: [mem 0x87e05f000000-0x87e05f7fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.658974] pci 0000:01:07.7: BAR 4: [mem 0x87e05ff00000-0x87e05fffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.670065] pci 0000:01:09.4: [177d:a012] type 00 class 0x0c8000 [ 11.676107] pci 0000:01:09.4: BAR 0: [mem 0x87e0d4000000-0x87e0d47fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.687065] pci 0000:01:09.4: BAR 4: [mem 0x87e0d4f00000-0x87e0d4ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.698184] pci 0000:01:0a.0: [177d:a022] type 00 class 0x058000 [ 11.704223] pci 0000:01:0a.0: BAR 0: [mem 0x87e088000000-0x87e0887fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.715176] pci 0000:01:0a.0: BAR 4: [mem 0x87e088f00000-0x87e088ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.726276] pci 0000:01:0a.1: [177d:a022] type 00 class 0x058000 [ 11.732302] pci 0000:01:0a.1: BAR 0: [mem 0x87e089000000-0x87e0897fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.743261] pci 0000:01:0a.1: BAR 4: [mem 0x87e089f00000-0x87e089ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.754354] pci 0000:01:0a.2: [177d:a022] type 00 class 0x058000 [ 11.760380] pci 0000:01:0a.2: BAR 0: [mem 0x87e08a000000-0x87e08a7fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.771339] pci 0000:01:0a.2: BAR 4: [mem 0x87e08af00000-0x87e08affffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.782443] pci 0000:01:0a.3: [177d:a022] type 00 class 0x058000 [ 11.788479] pci 0000:01:0a.3: BAR 0: [mem 0x87e08b000000-0x87e08b7fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.799432] pci 0000:01:0a.3: BAR 4: [mem 0x87e08bf00000-0x87e08bffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.810524] pci 0000:01:10.0: [177d:a026] type 00 class 0x028000 [ 11.816559] pci 0000:01:10.0: BAR 0: [mem 0x87e0e0000000-0x87e0e03fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.827511] pci 0000:01:10.0: BAR 4: [mem 0x87e0e0400000-0x87e0e07fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.838626] pci 0000:01:10.1: [177d:a026] type 00 class 0x028000 [ 11.844662] pci 0000:01:10.1: BAR 0: [mem 0x87e0e1000000-0x87e0e13fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.855614] pci 0000:01:10.1: BAR 4: [mem 0x87e0e1400000-0x87e0e17fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.866712] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 11.877779] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01 [ 11.884480] pci 0000:02:00.0: [177d:a01d] type 00 class 0x010400 [ 11.890505] pci 0000:02:00.0: BAR 0: [mem 0x870000000000-0x8700007fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.901464] pci 0000:02:00.0: BAR 4: [mem 0x870000f00000-0x870000ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.912544] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 11.923472] pci_bus 0000:02: busn_res: [bus 02-1f] end is updated to 02 [ 11.930158] pci 0000:03:00.0: [177d:a01a] type 00 class 0x120000 [ 11.936192] pci 0000:03:00.0: BAR 0: [mem 0x838000000000-0x8380003fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.947145] pci 0000:03:00.0: BAR 4: [mem 0x838000f00000-0x838000ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.958230] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 11.969153] pci_bus 0000:03: busn_res: [bus 03-1f] end is updated to 03 [ 11.975842] pci 0000:04:00.0: [177d:a019] type 00 class 0x120000 [ 11.981866] pci 0000:04:00.0: BAR 0: [mem 0x846000000000-0x8467ffffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 11.992825] pci 0000:04:00.0: BAR 4: [mem 0x846a00000000-0x846a000fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.003949] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 12.014884] pci_bus 0000:04: busn_res: [bus 04-1f] end is updated to 04 [ 12.021568] pci 0000:00:01.0: PCI bridge to [bus 01] [ 12.026544] pci 0000:00:14.0: PCI bridge to [bus 02] [ 12.031504] pci 0000:00:15.0: PCI bridge to [bus 03] [ 12.036467] pci 0000:00:16.0: PCI bridge to [bus 04] [ 12.042171] pci-host-generic 849000000000.pci: host bridge /soc@0/pci@849000000000 ranges: [ 12.050468] pci-host-generic 849000000000.pci: MEM 0x810000000000..0x817fffffffff -> 0x810000000000 [ 12.059956] pci-host-generic 849000000000.pci: Memory resource size exceeds max for 32 bits [ 12.068320] pci-host-generic 849000000000.pci: ECAM at [mem 0x849000000000-0x849001ffffff] for [bus 00-1f] [ 12.078072] pci-host-generic 849000000000.pci: PCI host bridge to bus 0001:00 [ 12.085212] pci_bus 0001:00: root bus resource [bus 00-1f] [ 12.090690] pci_bus 0001:00: root bus resource [mem 0x810000000000-0x817fffffffff] [ 12.098504] pci 0001:00:08.0: [177d:a01c] type 00 class 0x010601 [ 12.104532] pci 0001:00:08.0: BAR 0: [mem 0x814000000000-0x8140001fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.115487] pci 0001:00:08.0: BAR 4: [mem 0x814000200000-0x8140002fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.126606] pci 0001:00:09.0: [177d:a01c] type 00 class 0x010601 [ 12.131333] Freeing initrd memory: 13244K [ 12.132637] pci 0001:00:09.0: BAR 0: [mem 0x815000000000-0x8150001fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.147578] pci 0001:00:09.0: BAR 4: [mem 0x815000200000-0x8150002fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.158738] pci 0001:00:0a.0: [177d:a01c] type 00 class 0x010601 [ 12.164774] pci 0001:00:0a.0: BAR 0: [mem 0x816000000000-0x8160001fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.175726] pci 0001:00:0a.0: BAR 4: [mem 0x816000200000-0x8160002fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.186845] pci 0001:00:0b.0: [177d:a01c] type 00 class 0x010601 [ 12.192870] pci 0001:00:0b.0: BAR 0: [mem 0x817000000000-0x8170001fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.203840] pci 0001:00:0b.0: BAR 4: [mem 0x817000200000-0x8170002fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.215661] pci-host-generic 84a000000000.pci: host bridge /soc@0/pci@84a000000000 ranges: [ 12.223955] pci-host-generic 84a000000000.pci: MEM 0x842000000000..0x843fffffffff -> 0x842000000000 [ 12.233441] pci-host-generic 84a000000000.pci: Memory resource size exceeds max for 32 bits [ 12.241810] pci-host-generic 84a000000000.pci: ECAM at [mem 0x84a000000000-0x84a001ffffff] for [bus 00-1f] [ 12.251563] pci-host-generic 84a000000000.pci: PCI host bridge to bus 0002:00 [ 12.258703] pci_bus 0002:00: root bus resource [bus 00-1f] [ 12.264184] pci_bus 0002:00: root bus resource [mem 0x842000000000-0x843fffffffff] [ 12.271818] pci 0002:00:02.0: [177d:a002] type 01 class 0x060400 [ 12.278006] pci 0002:00:03.0: [177d:a01f] type 00 class 0x028000 [ 12.284041] pci 0002:00:03.0: BAR 0: [mem 0x842000000000-0x84200000ffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.294994] pci 0002:00:03.0: BAR 2: [mem 0x842040000000-0x84207fffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.305948] pci 0002:00:03.0: BAR 4: [mem 0x842000f00000-0x842000ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.317949] pci 0002:01:00.0: [177d:a01e] type 00 class 0x020000 [ 12.323985] pci 0002:01:00.0: BAR 0: [mem 0x843000000000-0x84303fffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.334938] pci 0002:01:00.0: BAR 4: [mem 0x843060000000-0x8430600fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 12.345893] pci 0002:01:00.0: VF BAR 0: [mem 0x8430a0000000-0x8430a01fffff 64bit] (from Enhanced Allocation, properties 0x4) [ 12.357105] pci 0002:01:00.0: VF BAR 4: [mem 0x8430e0000000-0x8430e01fffff 64bit] (from Enhanced Allocation, properties 0x4) [ 13.433187] pci 0002:01:00.0: VF(n) BAR0 space: [mem 0x8430a0000000-0x8430afffffff 64bit] (contains BAR0 for 128 VFs) [ 13.443809] pci 0002:01:00.0: VF(n) BAR4 space: [mem 0x8430e0000000-0x8430efffffff 64bit] (contains BAR4 for 128 VFs) [ 13.454648] pci 0002:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 13.465574] pci_bus 0002:01: busn_res: [bus 01-1f] end is updated to 01 [ 13.472190] pci 0002:00:02.0: PCI bridge to [bus 01] [ 13.477335] pci-host-generic 84b000000000.pci: host bridge /soc@0/pci@84b000000000 ranges: [ 13.485621] pci-host-generic 84b000000000.pci: MEM 0x818000000000..0x81ffffffffff -> 0x818000000000 [ 13.495104] pci-host-generic 84b000000000.pci: Memory resource size exceeds max for 32 bits [ 13.503470] pci-host-generic 84b000000000.pci: ECAM at [mem 0x84b000000000-0x84b001ffffff] for [bus 00-1f] [ 13.513229] pci-host-generic 84b000000000.pci: PCI host bridge to bus 0003:00 [ 13.520359] pci_bus 0003:00: root bus resource [bus 00-1f] [ 13.525849] pci_bus 0003:00: root bus resource [mem 0x818000000000-0x81ffffffffff] [ 13.534511] pci_thunder_pem 88001f000000.pci: host bridge /soc@0/pci@87e0c0000000 ranges: [ 13.542702] pci_thunder_pem 88001f000000.pci: IO 0x883000000000..0x88300000ffff -> 0x0000000000 [ 13.551938] pci_thunder_pem 88001f000000.pci: MEM 0x881010000000..0x881fffffffff -> 0x0010000000 [ 13.561168] pci_thunder_pem 88001f000000.pci: MEM 0x882000000000..0x882fffffffff -> 0x1000000000 [ 13.570391] pci_thunder_pem 88001f000000.pci: MEM 0x87e0c0000000..0x87e0c0ffffff -> 0x87e0c0000000 [ 13.579792] pci_thunder_pem 88001f000000.pci: Memory resource size exceeds max for 32 bits [ 13.588105] pci_thunder_pem 88001f000000.pci: ECAM at [mem 0x88001f000000-0x880057ffffff] for [bus 1f-57] [ 13.597771] pci_thunder_pem 88001f000000.pci: PCI host bridge to bus 0004:1f [ 13.604826] pci_bus 0004:1f: root bus resource [bus 1f-57] [ 13.610303] pci_bus 0004:1f: root bus resource [io 0x0000-0xffff] [ 13.616480] pci_bus 0004:1f: root bus resource [mem 0x881010000000-0x881fffffffff] (bus address [0x10000000-0xfffffffff]) [ 13.627432] pci_bus 0004:1f: root bus resource [mem 0x882000000000-0x882fffffffff pref] (bus address [0x1000000000-0x1fffffffff]) [ 13.639078] pci_bus 0004:1f: root bus resource [mem 0x87e0c0000000-0x87e0c0ffffff] [ 13.646658] pci 0004:1f:00.0: [177d:a100] type 01 class 0x060400 [ 13.652666] pci 0004:1f:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit pref] [ 13.659889] pci 0004:1f:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 13.666595] pci 0004:1f:00.0: enabling Extended Tags [ 13.671566] pci 0004:1f:00.0: BAR 0: [mem 0x87e0c0f00000-0x87e0c0ffffff 64bit] (from Enhanced Allocation, properties 0x0) [ 13.683635] pci 0004:1f:00.0: Primary bus is hard wired to 0 [ 13.689389] pci 0004:20:00.0: [1a03:1150] type 01 class 0x060400 [ 13.695445] pci 0004:20:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256) [ 13.704054] pci 0004:20:00.0: Max Payload Size set to 128 (was 128, max 128) [ 13.711097] pci 0004:20:00.0: enabling Extended Tags [ 13.716128] pci 0004:20:00.0: supports D1 D2 [ 13.720389] pci 0004:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 13.727169] pci 0004:20:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 13.738158] pci_bus 0004:21: extended config space not accessible [ 13.744325] pci 0004:21:00.0: [1a03:2000] type 00 class 0x030000 [ 13.750340] pci 0004:21:00.0: reg 0x10: [mem 0x881010000000-0x881010ffffff] [ 13.757312] pci 0004:21:00.0: reg 0x14: [mem 0x881011000000-0x88101101ffff] [ 13.764275] pci 0004:21:00.0: reg 0x18: [io 0x0000-0x007f] [ 13.769872] pci 0004:21:00.0: BAR 0: assigned to efifb [ 13.775050] pci 0004:21:00.0: supports D1 D2 [ 13.779311] pci 0004:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 13.786048] pci 0004:21:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 13.795399] pci_bus 0004:21: busn_res: [bus 21-57] end is updated to 21 [ 13.802010] pci_bus 0004:20: busn_res: [bus 20-57] end is updated to 21 [ 13.808643] pci 0004:1f:00.0: BAR 14: assigned [mem 0x881010000000-0x8810117fffff] [ 13.816214] pci 0004:1f:00.0: BAR 15: assigned [mem 0x882000000000-0x8820001fffff 64bit pref] [ 13.824736] pci 0004:1f:00.0: BAR 6: assigned [mem 0x881011800000-0x88101180ffff pref] [ 13.832646] pci 0004:1f:00.0: BAR 13: assigned [io 0x1000-0x2fff] [ 13.838826] pci 0004:20:00.0: BAR 14: assigned [mem 0x881010000000-0x8810117fffff] [ 13.846392] pci 0004:20:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 13.852566] pci 0004:21:00.0: BAR 0: assigned [mem 0x881010000000-0x881010ffffff] [ 13.860048] pci 0004:21:00.0: BAR 1: assigned [mem 0x881011000000-0x88101101ffff] [ 13.867529] pci 0004:21:00.0: BAR 2: assigned [io 0x1000-0x107f] [ 13.873620] pci 0004:20:00.0: PCI bridge to [bus 21] [ 13.878578] pci 0004:20:00.0: bridge window [io 0x1000-0x1fff] [ 13.884667] pci 0004:20:00.0: bridge window [mem 0x881010000000-0x8810117fffff] [ 13.892143] pci 0004:1f:00.0: PCI bridge to [bus 20-21] [ 13.897363] pci 0004:1f:00.0: bridge window [io 0x1000-0x2fff] [ 13.903452] pci 0004:1f:00.0: bridge window [mem 0x881010000000-0x8810117fffff] [ 13.910927] pci 0004:1f:00.0: bridge window [mem 0x882000000000-0x8820001fffff 64bit pref] [ 13.920145] pcieport 0004:1f:00.0: PME: Signaling with IRQ 28 [ 13.926239] pcieport 0004:1f:00.0: AER: enabled with IRQ 26 [ 13.931883] pcieport 0004:1f:00.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ [ 13.946670] efifb: probing for efifb [ 13.950303] efifb: framebuffer at 0x881010000000, using 1876k, total 1875k [ 13.957190] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 13.963107] efifb: scrolling: redraw [ 13.966672] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 14.088101] Console: switching to colour frame buffer device 100x37 [ 14.209220] fb0: EFI VGA frame buffer device [ 14.219084] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 14.232224] Serial: AMBA driver [ 14.235623] msm_serial: driver initialized [ 14.240473] arm-smmu: deprecated "mmu-masters" DT property in use; SMMU support unavailable [ 14.249687] arm-smmu 830000000000.smmu0: probing hardware configuration... [ 14.256564] arm-smmu 830000000000.smmu0: SMMUv2 with: [ 14.261607] arm-smmu 830000000000.smmu0: stage 1 translation [ 14.267347] arm-smmu 830000000000.smmu0: stage 2 translation [ 14.273083] arm-smmu 830000000000.smmu0: nested translation [ 14.278735] arm-smmu 830000000000.smmu0: non-coherent table walk [ 14.284822] arm-smmu 830000000000.smmu0: (IDR0.CTTW overridden by FW configuration) [ 14.292556] arm-smmu 830000000000.smmu0: stream matching with 128 register groups [ 14.300122] arm-smmu 830000000000.smmu0: 128 context banks (0 stage-2 only) [ 14.307168] arm-smmu 830000000000.smmu0: enabling workaround for Cavium erratum 27704 [ 14.315078] arm-smmu 830000000000.smmu0: Supported page sizes: 0x62215000 [ 14.321944] arm-smmu 830000000000.smmu0: Stage-1: 48-bit VA -> 48-bit IPA [ 14.328812] arm-smmu 830000000000.smmu0: Stage-2: 48-bit IPA -> 48-bit PA [ 14.336665] arm-smmu 831000000000.smmu1: probing hardware configuration... [ 14.343544] arm-smmu 831000000000.smmu1: SMMUv2 with: [ 14.348587] arm-smmu 831000000000.smmu1: stage 1 translation [ 14.354326] arm-smmu 831000000000.smmu1: stage 2 translation [ 14.360062] arm-smmu 831000000000.smmu1: nested translation [ 14.365715] arm-smmu 831000000000.smmu1: non-coherent table walk [ 14.371799] arm-smmu 831000000000.smmu1: (IDR0.CTTW overridden by FW configuration) [ 14.379538] arm-smmu 831000000000.smmu1: stream matching with 128 register groups [ 14.387128] arm-smmu 831000000000.smmu1: 128 context banks (0 stage-2 only) [ 14.394191] arm-smmu 831000000000.smmu1: enabling workaround for Cavium erratum 27704 [ 14.402099] arm-smmu 831000000000.smmu1: Supported page sizes: 0x62215000 [ 14.408969] arm-smmu 831000000000.smmu1: Stage-1: 48-bit VA -> 48-bit IPA [ 14.415839] arm-smmu 831000000000.smmu1: Stage-2: 48-bit IPA -> 48-bit PA [ 14.423693] arm-smmu 832000000000.smmu2: probing hardware configuration... [ 14.430562] arm-smmu 832000000000.smmu2: SMMUv2 with: [ 14.435609] arm-smmu 832000000000.smmu2: stage 1 translation [ 14.441345] arm-smmu 832000000000.smmu2: stage 2 translation [ 14.447084] arm-smmu 832000000000.smmu2: nested translation [ 14.452733] arm-smmu 832000000000.smmu2: non-coherent table walk [ 14.458820] arm-smmu 832000000000.smmu2: (IDR0.CTTW overridden by FW configuration) [ 14.466557] arm-smmu 832000000000.smmu2: stream matching with 128 register groups [ 14.474122] arm-smmu 832000000000.smmu2: 128 context banks (0 stage-2 only) [ 14.481162] arm-smmu 832000000000.smmu2: enabling workaround for Cavium erratum 27704 [ 14.489072] arm-smmu 832000000000.smmu2: Supported page sizes: 0x62215000 [ 14.495940] arm-smmu 832000000000.smmu2: Stage-1: 48-bit VA -> 48-bit IPA [ 14.502806] arm-smmu 832000000000.smmu2: Stage-2: 48-bit IPA -> 48-bit PA [ 14.510648] arm-smmu 833000000000.smmu3: probing hardware configuration... [ 14.517527] arm-smmu 833000000000.smmu3: SMMUv2 with: [ 14.522570] arm-smmu 833000000000.smmu3: stage 1 translation [ 14.528309] arm-smmu 833000000000.smmu3: stage 2 translation [ 14.534049] arm-smmu 833000000000.smmu3: nested translation [ 14.539698] arm-smmu 833000000000.smmu3: non-coherent table walk [ 14.545785] arm-smmu 833000000000.smmu3: (IDR0.CTTW overridden by FW configuration) [ 14.553523] arm-smmu 833000000000.smmu3: stream matching with 128 register groups [ 14.561085] arm-smmu 833000000000.smmu3: 128 context banks (0 stage-2 only) [ 14.568136] arm-smmu 833000000000.smmu3: enabling workaround for Cavium erratum 27704 [ 14.576049] arm-smmu 833000000000.smmu3: Supported page sizes: 0x62215000 [ 14.582914] arm-smmu 833000000000.smmu3: Stage-1: 48-bit VA -> 48-bit IPA [ 14.589786] arm-smmu 833000000000.smmu3: Stage-2: 48-bit IPA -> 48-bit PA [ 14.603689] ahci 0001:00:08.0: version 3.0 [ 14.607912] ahci 0001:00:08.0: SSS flag set, parallel bus scan disabled [ 14.614547] ahci 0001:00:08.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 14.622633] ahci 0001:00:08.0: flags: 64bit ncq sntf ilck stag pm led clo only pmp fbs pio slum part ccc apst [ 14.632639] ahci 0001:00:08.0: port 0 is not capable of FBS [ 14.638786] scsi host0: ahci [ 14.641897] ata1: SATA max UDMA/133 abar m2097152@0x814000000000 port 0x814000000100 irq 29 [ 14.650452] ahci 0001:00:09.0: SSS flag set, parallel bus scan disabled [ 14.657082] ahci 0001:00:09.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 14.665171] ahci 0001:00:09.0: flags: 64bit ncq sntf ilck stag pm led clo only pmp fbs pio slum part ccc apst [ 14.675176] ahci 0001:00:09.0: port 0 is not capable of FBS [ 14.681297] scsi host1: ahci [ 14.684345] ata2: SATA max UDMA/133 abar m2097152@0x815000000000 port 0x815000000100 irq 30 [ 14.692923] ahci 0001:00:0a.0: SSS flag set, parallel bus scan disabled [ 14.699551] ahci 0001:00:0a.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 14.707641] ahci 0001:00:0a.0: flags: 64bit ncq sntf ilck stag pm led clo only pmp fbs pio slum part ccc apst [ 14.717641] ahci 0001:00:0a.0: port 0 is not capable of FBS [ 14.723744] scsi host2: ahci [ 14.726771] ata3: SATA max UDMA/133 abar m2097152@0x816000000000 port 0x816000000100 irq 31 [ 14.735355] ahci 0001:00:0b.0: SSS flag set, parallel bus scan disabled [ 14.741970] ahci 0001:00:0b.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 14.750070] ahci 0001:00:0b.0: flags: 64bit ncq sntf ilck stag pm led clo only pmp fbs pio slum part ccc apst [ 14.760071] ahci 0001:00:0b.0: port 0 is not capable of FBS [ 14.766183] scsi host3: ahci [ 14.769210] ata4: SATA max UDMA/133 abar m2097152@0x817000000000 port 0x817000000100 irq 32 [ 14.778188] libphy: Fixed MDIO Bus: probed [ 14.782666] mousedev: PS/2 mouse device common for all mice [ 14.790737] rtc-efi rtc-efi.0: registered as rtc0 [ 14.796515] rtc-efi rtc-efi.0: setting system clock to 2021-09-01T11:56:36 UTC (1630497396) [ 14.807192] ledtrig-cpu: registered to indicate activity on CPUs [ 14.813577] hid: raw HID events driver (C) Jiri Kosina [ 14.820151] Unable to handle kernel paging request at virtual address ffff8000156dc028 [ 14.828064] Mem abort info: [ 14.830847] ESR = 0x96000007 [ 14.833891] EC = 0x25: DABT (current EL), IL = 32 bits [ 14.839194] SET = 0, FnV = 0 [ 14.842238] EA = 0, S1PTW = 0 [ 14.845369] Data abort info: [ 14.848238] ISV = 0, ISS = 0x00000007 [ 14.852064] CM = 0, WnR = 0 [ 14.855022] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000001f891e5000 [ 14.861714] [ffff8000156dc028] pgd=1000001fff0ff803, p4d=1000001fff0ff803, pud=1000001fff0fe803, pmd=10000001034f3003, pte=0000000000000000 [ 14.874237] Internal error: Oops: 96000007 [#1] SMP [ 14.879107] Modules linked in: [ 14.882153] CPU: 14 PID: 395 Comm: modprobe Not tainted 5.13.12-2-default #1 openSUSE Tumbleweed [ 14.890931] Hardware name: Cavium ThunderX CRB/To be filled by O.E.M., BIOS 5.11 12/12/2012 [ 14.899272] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO BTYPE=--) [ 14.905270] pc : load_elf_binary+0x664/0x1810 [ 14.909627] lr : load_elf_binary+0xaf4/0x1810 [ 14.913975] sp : ffff8000156dbcd0 [ 14.917280] x29: 0000000000000000 x28: ffff000102df5e00 x27: ffff00010148de00 [ 14.924413] x26: ffff8000156dbd9c x25: 0000aaaad0d80000 x24: ffff000102df7000 [ 14.931545] x23: 0000000000040130 x22: ffff000800881b00 x21: ffff800012515e28 [ 14.938676] x20: ffff80001044ce90 x19: ffff8000156dbdc0 x18: 0000000000000014 [ 14.945808] x17: 0000000077b8d053 x16: 000000001ceb51b0 x15: 0001400000000000 [ 14.952940] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 14.960071] x11: ffff000800883dd0 x10: 0000000000000000 x9 : 0000aaabaaaaaa9c [ 14.967203] x8 : ffff000800883838 x7 : 0000000000000030 x6 : 0000000000000024 [ 14.974335] x5 : ffff8000157009c0 x4 : 0000000000000000 x3 : 0000001f891e5000 [ 14.981466] x2 : 0000000000000000 x1 : 0000000000000a80 x0 : ffff8000156dc028 [ 14.988598] Call trace: [ 14.991036] load_elf_binary+0x664/0x1810 [ 14.995041] Code: 14000004 9100e000 eb0000bf 540006a0 (b9400002) [ 15.001129] ---[ end trace f8304eb4d2aa20ef ]--- [ 15.143143] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 15.150200] ata1.00: ATA-8: WDC WD5003ABYZ-011FA0, 01.01S03, max UDMA/133 [ 15.156992] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 15.164787] ata1.00: configured for UDMA/133 [ 15.169403] scsi 0:0:0:0: Direct-Access ATA WDC WD5003ABYZ-0 1S03 PQ: 0 ANSI: 5 [ 15.178047] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 15.185618] sd 0:0:0:0: [sda] Write Protect is off [ 15.190405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.195502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.254020] sda: sda1 sda2 sda3 [ 15.273141] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 15.333224] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.361935] ata4.00: ATA-10: WDC WD2004FBYZ-01YCBB0, RR01, max UDMA/133 [ 15.368555] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 15.389299] ata4.00: configured for UDMA/133 [ 15.793137] ata2: failed to resume link (SControl 301) [ 15.798276] ata2: SATA link down (SStatus 0 SControl 300) [ 15.833136] ata3: failed to resume link (SControl 301) [ 15.838275] ata3: SATA link down (SStatus 0 SControl 300) [ 15.843956] scsi 3:0:0:0: Direct-Access ATA WDC WD2004FBYZ-0 RR01 PQ: 0 ANSI: 5 [ 15.852521] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 15.860351] sd 3:0:0:0: [sdb] Write Protect is off [ 15.865149] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 15.870238] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.943548] sdb: sdb1 [ 16.043225] sd 3:0:0:0: [sdb] Attached SCSI disk -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 1189993] New: Btrfs hogged one of the CPU cores for more than 30 minutes after a reboot (5.13.12-2-default, 33df9c6)
by bugzilla_noreply＠suse.com 24 Jan '23

24 Jan '23

https://bugzilla.suse.com/show_bug.cgi?id=1189993 Bug ID: 1189993 Summary: Btrfs hogged one of the CPU cores for more than 30 minutes after a reboot (5.13.12-2-default, 33df9c6) Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Minor Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: lpechacek(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 852174 --> https://bugzilla.suse.com/attachment.cgi?id=852174&action=edit dmesg, SysRq-L, perf data, lsblk -f, snapper list My CPU fan had a long high-intensity exercise this morning. The root cause turned out to be a kworker thread doing "btrfs_preempt_reclaim_metadata_space". The offending thread identification is "kworker/u16:11". I've collected some data bits (dmesg, SysRq-L, perf data) during the event. It is unclear to me, however, what triggered this long-running FS maintenance and how I could stop it in case I needed to - i.e. if the laptop ran battery or if I sat in a quiet room where the CPU fan disturbance would be unacceptable. -- You are receiving this mail because: You are on the CC list for the bug.

1 2