November 2022 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1205668] New: plymouth can not popup LUKS unlock ui
by bugzilla_noreply＠suse.com 07 Mar '23

07 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1205668 Bug ID: 1205668 Summary: plymouth can not popup LUKS unlock ui Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: hillwoodroc(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I find this issue is caused by removing plymouth-keep-KillMode-none.patch. Rollback to the previous release package can workaround this issue. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 1179849] New: plymouth rpm output: bad invocation of systemd-sysv-convert: too few arguments
by bugzilla_noreply＠suse.com 07 Mar '23

07 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1179849 Bug ID: 1179849 Summary: plymouth rpm output: bad invocation of systemd-sysv-convert: too few arguments Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: mail(a)bernhard-voelker.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I just saw this in the RPM output when doing 'zypper dup' today (openSUSE Tumbleweed 20201205-0 -> 20201207-0): (41/51) Installing: plymouth-0.9.5+git20200921+20778f2-4.1.x86_64 .......[done] Additional rpm output: usage: systemd-sysv-convert --apply <service> [<service> ...] Too few arguments. Please check to avoid this kind of worrying messages. -- You are receiving this mail because: You are on the CC list for the bug.

1 11

[Bug 1170344] New: Btrfsprogs 5.6 bug: kernel booting stop at "BTRFS info" output
by bugzilla_noreply＠novell.com 07 Mar '23

07 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1170344 Bug ID: 1170344 Summary: Btrfsprogs 5.6 bug: kernel booting stop at "BTRFS info" output Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem Assignee: screening-team-bugs(a)suse.de Reporter: hillwoodroc(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I Updated My PC and laptop to Tumbleweed 20200417, then these two systems could not boot, and there is not any error on screen. I tried to chroot to get the dmesg log, I got many BTRFS notices at the end. I find Btrfsprogs was updated before 10 days ago in Factory. I guess this is a bug for Btrfsprogs. -- You are receiving this mail because: You are on the CC list for the bug.

2 18

[Bug 1205149] New: %kernel_module_package_buildreqs needs to require suse-kernel-rpm-scriptlets
by bugzilla_noreply＠suse.com 06 Mar '23

06 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1205149 Bug ID: 1205149 Summary: %kernel_module_package_buildreqs needs to require suse-kernel-rpm-scriptlets Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: lnussel(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- kernel rpm scriptlets will be moved to a separate subpackage (see https://github.com/openSUSE/suse-module-tools/pull/64) kmps do already (pre)require suse-kernel-rpm-scriptlets just fine. However during build those prerequires are not seen by the OBS schedule as they are hidden inside the %suse_kernel_module_package macro. So the package install check after build fails due to missing scriptlets. Therefore %kernel_module_package_buildreqs needs to list suse-kernel-rpm-scriptlets -- You are receiving this mail because: You are on the CC list for the bug.

1 6

[Bug 1194784] New: Yast should use RSpec verifying doubles everywhere
by bugzilla_noreply＠suse.com 06 Mar '23

06 Mar '23

https://bugzilla.suse.com/show_bug.cgi?id=1194784 Bug ID: 1194784 Summary: Yast should use RSpec verifying doubles everywhere Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: lslezak(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- This should avoid bugs in the unit tests. -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1201815] New: Inconsistent Bluetooth status display
by bugzilla_noreply＠suse.com 06 Mar '23

06 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1201815 Bug ID: 1201815 Summary: Inconsistent Bluetooth status display Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: gnome-bugs(a)suse.de Reporter: Ulrich.Windl(a)rz.uni-regensburg.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 860354 --> http://bugzilla.opensuse.org/attachment.cgi?id=860354&action=edit Bluetooth status in GNOME Sometimes when the Bluetooth status is "disabled", the suggested action in the GNOME menu is "Turn Off" (instead of "Turn On"). So yo have to "Turn Off" even if it's off, just to be able to see (if at all) a "Turn On" again. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 1203092] New: GNU grep 3.8 egrep / grep warnings and migration to grep -E / grep -F
by bugzilla_noreply＠suse.com 06 Mar '23

06 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1203092 Bug ID: 1203092 Summary: GNU grep 3.8 egrep / grep warnings and migration to grep -E / grep -F Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem Assignee: schwab(a)suse.de Reporter: Andreas.Stieger(a)gmx.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- GNU grep from 3.8 emitting warnings when invoking egrep/fgrep https://build.opensuse.org/request/show/1001097 > egrep and fgrep commands, deprecated since 2007, now warn that they are obsolescent and should be replaced by grep -E / -F We should look to eliminate egrep/fgrep from the distribution and replace all usages of egrep/fgrep with grep -E and grep -F, respectively. At the moment dropping these items breaks the grep build itself, it's all over the place. -- You are receiving this mail because: You are on the CC list for the bug.

1 33

[Bug 1197477] New: network port on monitor integrated usb hub never detects a link
by bugzilla_noreply＠suse.com 06 Mar '23

06 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1197477 Bug ID: 1197477 Summary: network port on monitor integrated usb hub never detects a link Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.4 Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: josua.m(a)t-online.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Greetings everybody! I recently got a new Monitor on my desk with an integrated USB-3.0 Hub and an integrated RJ45 network interface. But with openSUSE Leap (both 15.3 and 15.4-Beta), the system never detects a link - as shown by the ethtool output below: sudo ethtool usb0 [sudo] Passwort f�r root: Settings for usb0: Current message level: 0x00000007 (7) drv probe link Link detected: no I have tested this with two laptops: - An ASUS UX331UN (i7-8250U) running Leap 15.3 - An ROG G14 (Ryzen 5800) running Leap 15.4 Beta I have also tested 2 other operating systems - On Windows the interface works - On Ubuntu Focal the interface works Very rarely, a link is detected for a very short time, leading to networkmanager applet indicating connection attempt for a second or two. I caputres such a case in the dmesg below: [11867.152288] usb 1-3: new high-speed USB device number 15 using xhci_hcd [11867.302285] usb 1-3: New USB device found, idVendor=0424, idProduct=2806, bcdDevice= 2.10 [11867.302292] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [11867.302295] usb 1-3: Product: USB2806 Smart Hub [11867.302298] usb 1-3: Manufacturer: Microchip [11867.304310] hub 1-3:1.0: USB hub found [11867.304698] hub 1-3:1.0: 6 ports detected [11867.432196] usb 2-4: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd [11867.456449] usb 2-4: New USB device found, idVendor=0424, idProduct=5806, bcdDevice= 2.10 [11867.456457] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [11867.456462] usb 2-4: Product: USB5806 Smart Hub [11867.456465] usb 2-4: Manufacturer: Microchip [11867.457681] hub 2-4:1.0: USB hub found [11867.457710] hub 2-4:1.0: 5 ports detected [11867.600165] usb 1-3.6: new high-speed USB device number 16 using xhci_hcd [11867.704259] usb 1-3.6: New USB device found, idVendor=0424, idProduct=284c, bcdDevice= 2.00 [11867.704266] usb 1-3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [11867.704269] usb 1-3.6: Product: Hub Feature Controller [11867.704272] usb 1-3.6: Manufacturer: Microchip [11867.708519] hid-generic 0003:0424:284C.0005: hiddev96,hidraw1: USB HID v1.10 Device [Microchip Hub Feature Controller] on usb-0000:00:14.0-3.6/input1 [11867.780407] usb 2-4.3: new SuperSpeed Gen 1 USB device number 10 using xhci_hcd [11867.800927] usb 2-4.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=33.00 [11867.800933] usb 2-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [11867.800936] usb 2-4.3: Product: USB 10/100/1000 LAN [11867.800939] usb 2-4.3: Manufacturer: Realtek [11867.800941] usb 2-4.3: SerialNumber: 0033000001 [11867.825408] cdc_ncm 2-4.3:2.0: MAC-Address: b0:4f:13:d7:59:ae [11867.825414] cdc_ncm 2-4.3:2.0: setting rx_max = 16384 [11867.825522] cdc_ncm 2-4.3:2.0: setting tx_max = 16384 [11867.826100] cdc_ncm 2-4.3:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-4.3, CDC NCM, b0:4f:13:d7:59:ae [11867.972746] usb 1-3.6: USB disconnect, device number 16 [11868.208085] usb 1-3.6: new high-speed USB device number 17 using xhci_hcd [11868.312781] usb 1-3.6: New USB device found, idVendor=0424, idProduct=2840, bcdDevice= 2.10 [11868.312788] usb 1-3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [11868.312792] usb 1-3.6: Product: Hub Feature Controller [11868.312796] usb 1-3.6: Manufacturer: Microchip [11870.916715] cdc_ncm 2-4.3:2.0 usb0: 1000 mbit/s downlink 1000 mbit/s uplink [11871.172732] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [11888.115889] usb 1-3.6: reset high-speed USB device number 17 using xhci_hcd [11888.221821] usb 1-3.6: device firmware changed [11888.221922] usb 1-3.6: USB disconnect, device number 17 [11888.303624] usb 1-3.6: new high-speed USB device number 18 using xhci_hcd [11888.407663] usb 1-3.6: New USB device found, idVendor=0424, idProduct=284c, bcdDevice= 2.00 [11888.407670] usb 1-3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [11888.407674] usb 1-3.6: Product: Hub Feature Controller [11888.407677] usb 1-3.6: Manufacturer: Microchip [11888.411497] hid-generic 0003:0424:284C.0006: hiddev96,hidraw1: USB HID v1.10 Device [Microchip Hub Feature Controller] on usb-0000:00:14.0-3.6/input1 Also adding an lsusb: Bus 002 Device 010: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter Bus 002 Device 009: ID 0424:5806 Microchip Technology, Inc. (formerly SMSC) USB5806 Smart Hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0a2b Intel Corp. Bluetooth wireless interface Bus 001 Device 002: ID 13d3:5a09 IMC Networks USB2.0 VGA UVC WebCam Bus 001 Device 018: ID 0424:284c Microchip Technology, Inc. (formerly SMSC) Hub Feature Controller Bus 001 Device 015: ID 0424:2806 Microchip Technology, Inc. (formerly SMSC) USB2806 Smart Hub Bus 001 Device 006: ID 0781:55a1 SanDisk Corp. Cruzer Spark Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I'd be happy to do experiments if somebody can point me in a meaningful direction on how to approach this issue. -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1166296] New: Return of Yast2-fonts
by bugzilla_noreply＠novell.com 04 Mar '23

04 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1166296 Bug ID: 1166296 Summary: Return of Yast2-fonts Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: cornelis(a)solcon.nl QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- As yast2-fonts is back in TW again after a brief hiatus, would it be possible to add it again to Leap 15.2? -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1200235] New: Multiple X sessions not possible with Plasma (Wayland)
by bugzilla_noreply＠suse.com 04 Mar '23

04 Mar '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1200235 Bug ID: 1200235 Summary: Multiple X sessions not possible with Plasma (Wayland) Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: simplyschinne(a)gmx.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- *steps to reproduce* (1) log in user1 with 'Desktop Session: Plasma (Wayland)' (2) lock screen (3) on lock screen, chose 'switch user' (4) log in user2 with 'Desktop Session: Plasma (Wayland)' (5) press ctrl-alt-f7 *expected behaviour* lock screen is displayed with prompt for user1's password, user1's session can be continued after keying in password *observed behaviour* lock screen is displayed but no key stroke, no mouse click is accepted. PC has to be rebooted. *notes* (1) Bug reproducible 100% with Desktop Session Plasma (Wayland) (2) Bug NOT reproducible with Desktop Session Plasma (X11) *environment* qqq@linux ~$ uname -a Linux linux.fritz.box 5.18.1-1-default #1 SMP PREEMPT_DYNAMIC Mon May 30 07:49:01 UTC 2022 (d00e88d) x86_64 x86_64 x86_64 GNU/Linux qqq@linux ~$ cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20220603" ID="opensuse-tumbleweed" ID_LIKE="opensuse suse" VERSION_ID="20220603" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20220603" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" DOCUMENTATION_URL="https://en.opensuse.org/Portal:Tumbleweed" LOGO="distributor-logo-Tumbleweed" -- You are receiving this mail because: You are on the CC list for the bug.

1 4