August 2021 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1188767] New: DVD tray ejects on waking from suspend
by bugzilla_noreply＠suse.com 02 Aug '21

02 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1188767 Bug ID: 1188767 Summary: DVD tray ejects on waking from suspend Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: psychonaut(a)nothingisreal.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I have an openSUSE Tumbleweed system running on an x86-64 desktop system with a DVD-ROM drive. With kernel-default-5.13.1 or kernel-default-5.13.2, my DVD tray automatically ejects whenever the computer resumes from suspend. The problem does not occur with kernel-default-5.12.13. Steps to reproduce: 1. Boot to kernel-default-5.13.1 or kernel-default-5.13.2 2. Switch to a text console and log in as root 3. systemctl suspend 4. Let the computer suspend, then press a key to wake it up Observed behaviour: 5. Computer resumes from suspend and the DVD tray ejects and remains open Expected behaviour: 5. Computer should resume from suspend and DVD tray should remain closed -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 1188728] New: external usb cd/dvd disc drive continually ejects once it is opened
by bugzilla_noreply＠suse.com 02 Aug '21

02 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1188728 Bug ID: 1188728 Summary: external usb cd/dvd disc drive continually ejects once it is opened Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: screening-team-bugs(a)suse.de Reporter: iqgrande(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Greetings: I have an external Pioneer Blu-ray Drive that I have plugged into a USB port. If I press the "eject" button on it, it will open. However, when I close it, then it will continue to immediately eject. This renders the drive unusable while in openSUSE Tumbleweed. I have some additional notes below. Thank you for any insight you can provide. * If I turn the computer off with it ejected, insert a disk, close it, and then turn the computer on, it will appropriately mount the disk within Tumbleweed. * Things work fine on the same system when within Windows 10. * It used to also work fine when I was running Linux Mint 19.* (I upgraded 7 months ago and this was the first time I was going to use it). * I am not sure how to check the log files for additional information from this since it would appear they are stored via System-D stuff which I haven't learned yet. I have what I could figure out from the log files below. {{{ # journalctl -b /dev/sr0 -- Journal begins at Sat 2021-01-02 16:35:39 MST, ends at Mon 2021-07-26 23:06:24 MDT. -- Jul 26 16:45:37 babeltumble kernel: pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 Jul 26 16:45:37 babeltumble kernel: pci 0000:00:14.0: reg 0x10: [mem 0xf7310000-0xf731ffff 64bit] Jul 26 16:45:37 babeltumble kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold Jul 26 16:45:38 babeltumble kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller Jul 26 16:45:38 babeltumble kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus num> Jul 26 16:45:38 babeltumble kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 > Jul 26 16:45:38 babeltumble kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller Jul 26 16:45:38 babeltumble kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus num> Jul 26 16:45:38 babeltumble kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed Jul 26 16:45:38 babeltumble kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, > Jul 26 16:45:38 babeltumble kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumbe> Jul 26 16:45:38 babeltumble kernel: usb usb2: Product: xHCI Host Controller Jul 26 16:45:38 babeltumble kernel: usb usb2: Manufacturer: Linux 5.13.4-1-default xhci-hcd Jul 26 16:45:38 babeltumble kernel: usb usb2: SerialNumber: 0000:00:14.0 Jul 26 22:45:40 babeltumble kernel: usb 2-8: new SuperSpeed USB device number 4 using xhci_hcd Jul 26 22:45:40 babeltumble kernel: usb 2-8: LPM exit latency is zeroed, disabling LPM. Jul 26 22:45:40 babeltumble kernel: usb 2-8: New USB device found, idVendor=08e4, idProduct=017a, b> Jul 26 22:45:40 babeltumble kernel: usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber> Jul 26 22:45:40 babeltumble kernel: usb 2-8: Product: Pioneer Blu-ray Drive Jul 26 22:45:40 babeltumble kernel: usb 2-8: Manufacturer: Pioneer Corporation Jul 26 22:45:40 babeltumble kernel: usb 2-8: SerialNumber: 1409110512700794 Jul 26 22:45:40 babeltumble kernel: usb-storage 2-8:1.0: USB Mass Storage device detected Jul 26 22:45:40 babeltumble kernel: scsi host5: usb-storage 2-8:1.0 Jul 26 22:45:41 babeltumble kernel: scsi 5:0:0:0: CD-ROM PIONEER BD-RW BDR-XD07 1.02 > Jul 26 22:45:41 babeltumble kernel: scsi 5:0:0:0: Attached scsi generic sg4 type 5 Jul 26 22:45:42 babeltumble kernel: sr 5:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw> Jul 26 22:45:42 babeltumble kernel: sr 5:0:0:0: Attached scsi CD-ROM sr0 }}} Kind regards, Anthony -- You are receiving this mail because: You are on the CC list for the bug.

1 16

[Bug 1188947] sparse versioning prevents update from being installed
by bugzilla_noreply＠suse.com 02 Aug '21

02 Aug '21

https://bugzilla.suse.com/show_bug.cgi?id=1188947 https://bugzilla.suse.com/show_bug.cgi?id=1188947#c3 --- Comment #3 from Jiri Slaby <jslaby(a)suse.com> --- (In reply to Jiri Slaby from comment #2) > I know about this -- I tried to fix it, but I did not find a way how... > Should I go with 2021-0.6.3 or alike? (For leap only.) More precisely: $ zypper versioncmp 20180324-lp152.3.9 20210101-0.6.3-lp152.4.3.1 20180324-lp152.3.9 is older than 20210101-0.6.3-lp152.4.3.1 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1188947] sparse versioning prevents update from being installed
by bugzilla_noreply＠suse.com 02 Aug '21

02 Aug '21

https://bugzilla.suse.com/show_bug.cgi?id=1188947 https://bugzilla.suse.com/show_bug.cgi?id=1188947#c2 --- Comment #2 from Jiri Slaby <jslaby(a)suse.com> --- (In reply to Jean Delvare from comment #0) > On my Leap 15.2 system, 2 versions of the "sparse" package are available: > > sparse | package | 20180324-lp152.3.9 | x86_64 | Main repository > sparse | package | 0.6.3-lp152.4.3.1 | x86_64 | Update repository > > The change in versioning scheme causes the version in the main repository to > be considered as more recent than the version in the update repository. Thus > the update does not get installed. I know about this -- I tried to fix it, but I did not find a way how... Should I go with 2021-0.6.3 or alike? (For leap only.) -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1188963] New: Printer activation in yast for HP printers/scanners requiring plugins is not working
by bugzilla_noreply＠suse.com 02 Aug '21

02 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1188963 Bug ID: 1188963 Summary: Printer activation in yast for HP printers/scanners requiring plugins is not working Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.3 Hardware: Other OS: Other Status: NEW Severity: Major Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: foolishewe(a)hotmail.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Tl;dr Could you please update the hplip version, I propose to 3.21.4. It seems like the Leap 15.3 hplip version 3.20.11 has an hp-setup used picks a bad hp-plugin version, also 3.20.11, which does not have the correct checksum for the plugin I need. I had downgraded to OpenSuse 15.2 and did Zypper up and installed the driver. I then reinstalled 15.3, did a zypper up and then added the repository https://download.opensuse.org/repositories/home:/Sauerland:/sane/openSUSE_L… which had had a hplip version 3.21.4, and was able to get my scanner operational. The Yast2 interface has been invaluable in the past, and I've had issues with setting up my HP ColorJet MFP 477fnw, hp-setup runs as expected and the printer works, but the hp-plugins program is needed to configure scanner access. In particular 1) I go to the printer configuration manager via yast and then select Run hp-setup 2) The printer and the corresponding fax are correctly setup, click on OK and finished. 3) When I go to the scanner page I see the scanner as detected, but when I select the button to pulldown other->Test, I get a pop-up error saying: Test with 'scanimage -d hpaio:/net/HP_Color_LaserJet_MFP_M477fnw?ip=192.168.1.254 -v' failed. The results are: Output format is not set, using pnm as a default. scanimage: open of device hpaio:/net/HP_Color_LaserJet_MFP_M477fnw?ip=192.168.1.254 failed: Error during device I/O 4) But the hp-plugin was activated, but the ui window is not displayed. On the Driver-Plugin Installation is Required window, click on Next, 5)A Driver Plugin Installation window pops up, take the default "Download and install from an HP authorized server (Recommended), and click Next. 5) Get popup saying /home/foolishewe/.hplip/hplip-3.20.11-plugin.run file does not match its checksum. File may have been corrupted or altered, only choice is to click OK (but it really is not OK). 6) Get a popup window that says Failed to install Plug-in. Either you have chosen to skip the Plug-in installation or entered incorrect Password, only choice is OK again. 7) Get Error Failed to test hpaio popup. XSane also complains and also launches hp-plugin before failing. hp-plugin --version reports: error: /root/.hplip/hplip-3.20.11-plugin.run file does not match its checksum. File may have been corrupted or altered foolishewe@localhost:~/testdir> hp-plugin --version HP Linux Imaging and Printing System (ver. 3.20.11) Plugin Download and Install Utility ver. 2.1 foolishewe@localhost:~/testdir> hp-setup --version HP Linux Imaging and Printing System (ver. 3.20.11) Printer/Fax Setup Utility ver. 9.0 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1180358] [Build 20201224] timeout while waiting for vagrant box
by bugzilla_noreply＠suse.com 02 Aug '21

02 Aug '21

https://bugzilla.suse.com/show_bug.cgi?id=1180358 https://bugzilla.suse.com/show_bug.cgi?id=1180358#c15 --- Comment #15 from openQA Review <openqa-review(a)suse.de> --- This is an autogenerated message for openQA integration by the openqa_review script: This bug is still referenced in a failing openQA test: extra_tests_vagrant https://openqa.opensuse.org/tests/1864253 To prevent further reminder comments one of the following options should be followed: 1. The test scenario is fixed by applying the bug fix to the tested product or the test is adjusted 2. The openQA job group is moved to "Released" or "EOL" (End-of-Life) 3. The label in the openQA scenario is removed -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1188958] New: Zim desktop missing gtk3-devel and other dependencies to run
by bugzilla_noreply＠suse.com 01 Aug '21

01 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1188958 Bug ID: 1188958 Summary: Zim desktop missing gtk3-devel and other dependencies to run Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: screening-team-bugs(a)suse.de Reporter: sbmichael(a)tuta.io QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- on a newly installed Tumbleweed system, 'zypper install zim' pulls just 'zim-lang' with it. However, when running zim the following error is thrown. Traceback (most recent call last): File "/usr/bin/zim", line 130, in <module> main() File "/usr/bin/zim", line 104, in main import zim.main File "/usr/lib/python3.8/site-packages/zim/main/__init__.py", line 31, in <module> from zim.notebook import Notebook, Path, \ File "/usr/lib/python3.8/site-packages/zim/notebook/__init__.py", line 43, in <module> from .info import NotebookInfo, NotebookInfoList, \ File "/usr/lib/python3.8/site-packages/zim/notebook/info.py", line 18, in <module> from .notebook import NotebookConfig, _resolve_relative_config File "/usr/lib/python3.8/site-packages/zim/notebook/notebook.py", line 17, in <module> import zim.templates File "/usr/lib/python3.8/site-packages/zim/templates/__init__.py", line 61, in <module> from zim.templates.functions import build_template_functions File "/usr/lib/python3.8/site-packages/zim/templates/functions.py", line 24, in <module> from zim.formats.html import html_encode File "/usr/lib/python3.8/site-packages/zim/formats/__init__.py", line 78, in <module> from zim.plugins import PluginManager File "/usr/lib/python3.8/site-packages/zim/plugins/__init__.py", line 50, in <module> from zim.actions import hasaction File "/usr/lib/python3.8/site-packages/zim/actions.py", line 36, in <module> PRIMARY_MODIFIER_MASK = _get_modifier_mask() File "/usr/lib/python3.8/site-packages/zim/actions.py", line 30, in _get_modifier_mask gi.require_version('Gtk', '3.0') File "/usr/lib64/python3.8/site-packages/gi/__init__.py", line 126, in require_version raise ValueError('Namespace %s not available' % namespace) ValueError: Namespace Gtk not available 'zypper install gtk3-devel' solves this issue by pulling other required dependencies. atk-devel at-spi2-atk-devel at-spi2-core-devel bison bison-lang cairo-devel dbus-1-devel fontconfig-devel freetype2-devel fribidi-devel gdk-pixbuf-devel gettext-its-gtk4 gettext-tools glib2-devel glibc-devel graphite2-devel gtk3-devel harfbuzz-devel libblkid-devel libbrotli-devel libbz2-devel libdatrie-devel libepoxy-devel libexpat-devel libffi-devel libglvnd-devel libicu-devel libmount-devel libpcre16-0 libpcre2-32-0 libpcre2-posix3 libpcrecpp0 libpcreposix0 libpixman-1-0-devel libpng16-compat-devel libpng16-devel libselinux-devel libsepol-devel libstdc++6-devel-gcc11 libstdc++-devel libthai-devel libuuid-devel libX11-devel libXau-devel libxcb-devel libxcb-screensaver0 libxcb-xf86dri0 libxcb-xtest0 libxcb-xvmc0 libXcomposite-devel libxcrypt-devel libXcursor-devel libXdamage-devel libXext-devel libXfixes-devel libXft-devel libXi-devel libXinerama-devel libxkbcommon-devel libXrandr-devel libXrender-devel libXtst-devel linux-glibc-devel m4 Mesa-KHR-devel Mesa-libEGL-devel Mesa-libGL-devel pango-devel pcre2-devel pcre-devel typelib-1_0-Atk-1_0 typelib-1_0-Atspi-2_0 typelib-1_0-GdkPixdata-2_0 typelib-1_0-Gtk-3_0 wayland-devel wayland-protocols-devel xorgproto-devel zlib-devel and these two automatically recommended packages bison-lang libpng16-compat-devel Afterwards, Zim can run successfully as expected. The normal behaviour should be, by installing zim package, zypper pulling all these other required dependencies with it in order to run zim successfully. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1188590] VUL-0: chromium: Update to 92.0.4515.107
by bugzilla_noreply＠suse.com 01 Aug '21

01 Aug '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1188590 http://bugzilla.opensuse.org/show_bug.cgi?id=1188590#c2 --- Comment #2 from OBSbugzilla Bot <bwiedemann+obsbugzillabot(a)suse.com> --- This is an autogenerated message for OBS integration: This bug (1188590) was mentioned in https://build.opensuse.org/request/show/909599 15.2 / chromium https://build.opensuse.org/request/show/909600 Backports:SLE-15-SP3 / chromium -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1188687] bridge, can't connect
by bugzilla_noreply＠suse.com 01 Aug '21

01 Aug '21

https://bugzilla.suse.com/show_bug.cgi?id=1188687 https://bugzilla.suse.com/show_bug.cgi?id=1188687#c8 --- Comment #8 from Episteme PROMENEUR <epistemepromeneur(a)free.fr> --- Be careful in the log because I erroneously connected/disconnected the old wired connection before reconnecting the bridge. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1188687] bridge, can't connect
by bugzilla_noreply＠suse.com 01 Aug '21

01 Aug '21

https://bugzilla.suse.com/show_bug.cgi?id=1188687 https://bugzilla.suse.com/show_bug.cgi?id=1188687#c7 --- Comment #7 from Episteme PROMENEUR <epistemepromeneur(a)free.fr> --- Created attachment 851462 --> https://bugzilla.suse.com/attachment.cgi?id=851462&action=edit "journactl -b" output -- You are receiving this mail because: You are on the CC list for the bug.

1 0