April 2020 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1137997] New: Expert Partitioner: import multi-device Btrfs mount points
by bugzilla_noreply＠novell.com 04 Oct '22

04 Oct '22

http://bugzilla.suse.com/show_bug.cgi?id=1137997 Bug ID: 1137997 Summary: Expert Partitioner: import multi-device Btrfs mount points Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: jlopez(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- When importing mount points from a system with a multi-device Btrfs filesystem, the multi-device Btrfs is imported as a single-device. It should reconstruct the multi-device Btrfs, if possible. -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1161828] New: Sound crack on some frequency or peak of audio
by bugzilla_noreply＠novell.com 30 Sep '22

30 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1161828 Bug ID: 1161828 Summary: Sound crack on some frequency or peak of audio Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Sound Assignee: tiwai(a)suse.com Reporter: dev.dorrejo(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- lspci -vvv -s 00:1f.3 00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10) DeviceName: Onboard - Sound Subsystem: Micro-Star International Co., Ltd. [MSI] Device 1219 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 138 Region 0: Memory at a4310000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at a4100000 (64-bit, non-prefetchable) [size=1M] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Vendor Specific Information: Len=14 <?> Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee00438 Data: 0000 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_soc_skl, snd_sof_pci -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 993401] New: grub2-install for EFI installs an EFI entry that is not bootable
by bugzilla_noreply＠novell.com 30 Sep '22

30 Sep '22

http://bugzilla.suse.com/show_bug.cgi?id=993401 Bug ID: 993401 Summary: grub2-install for EFI installs an EFI entry that is not bootable Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.1 Hardware: aarch64 OS: openSUSE 42.1 Status: NEW Severity: Minor Priority: P5 - None Component: Bootloader Assignee: jsrain(a)suse.com Reporter: alan(a)softiron.co.uk QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Running grub2-install does not yield a bootable entry in EFI's boot menu. On Leap and Tumbleweed, this means booting relies instead on the startup.nsh in the EFI partition. This occurs on Aarch64 with both AMD/AMI firmware and Tianocore/edk2/OpenPlatformPkg firmware. Steps to reproduce: 1. Install Leap 42.1 from the OEM image 2. Restart and boot the system 2a. Observe that the startup.nsh (in the EFI partition) is used to boot the system. 3. Reboot again, but During boot-up, enter the EFI menu. 3a. Observe that in the boot manager in the EFI menus, there is no entry for Leap. 4. Restart the system or select the UEFI shell option, booting from startup.nsh 5. From the command prompt in Leap, run: grub2-install /dev/sda 6. Reboot the system 7. During start-up enter the EFI menu. 7a. Observe that in the EFI menu there is an entry called opensuse-leap42.1-arm-jeos-devel-efi, or something like it. 8. Select the opensuse-leap* boot menu item and try to boot it. 9. Observe that it does not boot, and returns to the boot menu. 10. Select the UEFI Shell option, and observe that it will boot using startup.nsh. 11. From the Linux command prompt, run "efibootmgr -v" 11a. Observe that the entry for opensuse-leap* is truncated :( 11b. Note the same can be observed by running "dumpstore" from the EFI environment. Note: The same thing happens if the bootloader is re-installed using "yast2 bootloader". Note that this is broken in Leap, but works fine in SLES, probably because the path and OS name for SLES is so much shorter. Interestingly, if I try to add my own entry with the proper path: efibootmgr -c -d /dev/sda -p 1 --loader "EFI\\opensuse-leap42.1-arm-jeos-devel-efi\\grubarm64.efi" -L Test_Entry_By_Alan and then inspect it with: efibootmgr -v I see my entry is truncated too :( Boot0007* Test_Entry_By_Alan HD(1,800,64004,cb3a713f-f051-4c9c-b643-b9e1358f6c2d)File(EFI\opensuse-leap42.1-arm-jeos-devel-ef) In summary, grub2-install and/or efibootmgr is simply putting a boot entry into NVRAM that is truncated and not valid. Thanks! Alan. -- You are receiving this mail because: You are on the CC list for the bug.

2 20

[Bug 1163179] New: nscd can't monitor /etc/services after the recent netcfg update
by bugzilla_noreply＠novell.com 29 Sep '22

29 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1163179 Bug ID: 1163179 Summary: nscd can't monitor /etc/services after the recent netcfg update Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Factory Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: arjan.de.jong(a)sighup.nl QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- After installing the netcfg update which moves /etc/services to /usr/etc nscd can't monitor the file /etc/services. >From /var/log/zypp/history 2020-02-04 21:03:04|install|netcfg|11.6-5.1|noarch||repo-oss|d37960598c66a976437b84dc749c527b21165630784162c67f9e5a22188937d8| Since that moment I see these entries with "journalctl -u nscd": Feb 04 21:03:04 discovery nscd[2546]: 2546 monitored file `/etc/services` was deleted, removing watch Feb 04 21:03:25 discovery nscd[2546]: 2546 checking for monitored file `/etc/services': No such file or directory Feb 04 21:03:40 discovery nscd[2546]: 2546 checking for monitored file `/etc/services': No such file or directory Feb 04 21:04:00 discovery nscd[2546]: 2546 checking for monitored file `/etc/services': No such file or directory Feb 04 21:04:15 discovery nscd[2546]: 2546 checking for monitored file `/etc/services': No such file or directory Feb 04 21:04:35 discovery nscd[2546]: 2546 checking for monitored file `/etc/services': No such file or directory The entry that states the file was deleted was a single occurence. The entries about no such file or directory continue. -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1079439] New: New area for ARCES Inter-Department Research Center Bologna
by bugzilla_noreply＠novell.com 26 Sep '22

26 Sep '22

http://bugzilla.suse.com/show_bug.cgi?id=1079439 Bug ID: 1079439 Summary: New area for ARCES Inter-Department Research Center Bologna Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: OBS Request Assignee: mrueckert(a)suse.com Reporter: marco.giusti(a)posteo.de QA Contact: adrian(a)suse.com Found By: --- Blocker: --- We first reached OBS at ARCES[1] after the demand of porting our application, Virtualbricks[2], to SLE 12. Even without any experience with SUSE or RPM, OBS allowed us to easily create the needed packages and to deliver the software to our partners. Convinced of the benefits of OBS we want to exploit it more. Following the advice from adrianS_ in #opensuse-buildservice here I ask for a dedicated space that could be recognized as connected to us, ideally with arces.unibo.it in the name. Here[3] you can see the results of my attempts made with my account. For a confirmation of the officiality* of my request you can contact Carlo Caini[4], Associate Professor at ARCES, who directed the development of Virtualbricks the last years. A few words about Virtualbricks and how it is exploited by ARCES. Virtualbricks is a frontend for the management of Qemu Virtual Machines (VMs) and VDE virtualized network devices (switches, channel emulators, etc.). Although it can be used to manage isolated VMs, its peculiar aim is to design and manage testbeds consisting of many VMs interconnected by VDE elements. In other words, it allows to extend the concept of VM to testbeds, which thanks to Virtualbricks can become entirely software-defined. Among the wide variety of possible applications, we have academic research and teaching on computer networks. In particular, we would like to use this space as main hub to distribute our software to the students of the course Protocols and Architectures for Space Networks, master degrees in TLC and Computer Engineering of the University of Bologna, as well as to our research partners, including some European space agencies (ESA, DLR). Thank you for taking this request in account. Marco * Although this request received the consensus of the Director of ARCES, this space will not be recognized as *official* by the University of Bologna i.e. it will not receive any direct support from University of Bologna outside our own effort to maintain it. [1] http://www.arces.unibo.it/en [2] https://github.com/virtualsquare/virtualbricks [3] https://build.opensuse.org/project/show/home:marcogiusti [4] https://www.unibo.it/sitoweb/carlo.caini/en -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1062260] New: Repository medical gone ... where are the packages?
by bugzilla_noreply＠novell.com 26 Sep '22

26 Sep '22

http://bugzilla.suse.com/show_bug.cgi?id=1062260 Bug ID: 1062260 Summary: Repository medical gone ... where are the packages? Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: All OS: openSUSE Factory Status: NEW Severity: Major Priority: P5 - None Component: 3rd party software Assignee: opensuse-communityscreening(a)forge.provo.novell.com Reporter: werner(a)suse.com QA Contact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- I'd like to know where the packages of the former repository medical are located? I'm missing the packages aeskulap, xmedcon, ... -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1137381] New: A package name passed to the lang_package macro with the -n option is not included in the summary and description
by bugzilla_noreply＠novell.com 26 Sep '22

26 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1137381 Bug ID: 1137381 Summary: A package name passed to the lang_package macro with the -n option is not included in the summary and description Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: ralf.habacker(a)freenet.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- See implementation for macro lang_package at https://build.opensuse.org/package/view_file/openSUSE:Leap:15.0:Update/rpm/… for details -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 1093827] New: imagewriter fails with dbus error
by bugzilla_noreply＠novell.com 24 Sep '22

24 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1093827 Bug ID: 1093827 Summary: imagewriter fails with dbus error Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: hacking(a)mail.quatrox.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- SUSE Studio Image Writer (imagewriter) does not work for me (in Tumbleweed). The GUI opens and I select the image and device and click write. Then it asks to umount the disk (if it is already mounted). The partitions are now unmounted. It now asks me to confirm to overwrite the content of the device, and I click OK. Now nothing is happening for maybe 30 seconds. Then a dialog window appears with the following text: DBUS error (sdc): Did not receive reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. The dialog only gives me the option to accept this by pressing OK. Then a new dialog appears with the following text: Couldn't open /dev/sdc: Resource temporarily unavailable Again, I have to press OK. -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1153174] New: Yasts's "%posttrans" progress display gets stuck in online_update
by bugzilla_noreply＠novell.com 22 Sep '22

22 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1153174 Bug ID: 1153174 Summary: Yasts's "%posttrans" progress display gets stuck in online_update Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: All OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: Ulrich.Windl(a)rz.uni-regensburg.de QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- When updating many packages (e.g. libreoffice, kernel, etc.), I noticed that the "posttrans" display displayed progress for libreoffice icons up to 60%, then got stuck, and it was the last posttrans indicator seen. However from the noises of my disks I noticed that the kernel also had triggered rebuilding the initrd and reinstalling GRUB2. >From that I conclude that the posttrans progress display is broken. I also searched y2log fro "posttrans:" messages, confirming my point of view: 2019-10-07 09:39:12 <1> pc(4931) [zypp::posttrans] RpmPostTransCollector.cc(collectScriptFromPackage):77 COLLECT posttrans: /var/adm/update-scripts/posttransl4NIpO/libreoffice-icon-themes-6.2.7.1-lp151.3.6.1.noarch.rpmLnrBBe{- 0700 0/0 size 254} 2019-10-07 09:40:56 <1> pc(4931) [zypp::posttrans] RpmPostTransCollector.cc(collectScriptFromPackage):77 COLLECT posttrans: /var/adm/update-scripts/posttransl4NIpO/ibus-1.5.19-lp151.2.3.1.x86_64.rpmysd9Ev{- 0700 0/0 size 24} 2019-10-07 09:41:22 <1> pc(4931) [zypp::posttrans] RpmPostTransCollector.cc(collectScriptFromPackage):77 COLLECT posttrans: /var/adm/update-scripts/posttransl4NIpO/libreoffice-l10n-en-6.2.7.1-lp151.3.6.1.noarch.rpmlRMsQg{- 0700 0/0 size 238} 2019-10-07 09:42:23 <1> pc(4931) [zypp::posttrans] RpmPostTransCollector.cc(collectScriptFromPackage):77 COLLECT posttrans: /var/adm/update-scripts/posttransl4NIpO/device-mapper-1.02.149-lp151.4.3.1.x86_64.rpm7jPj3s{- 0700 0/0 size 167} 2019-10-07 09:42:39 <1> pcrz00066(4931) [zypp::posttrans] RpmPostTransCollector.cc(collectScriptFromPackage):77 COLLECT posttrans: /var/adm/update-scripts/posttransl4NIpO/lvm2-2.02.180-lp151.4.3.1.x86_64.rpmH4FrlA{- 0700 0/0 size 167} [...then the scripts are executed...] device-mapper calls dracut to rebuild the initrd All the scripts were actually executed, but not displayed 2019-10-07 09:45:53 <2> pc(4931) [PLUGIN] PluginScript.cc(~PluginDumpStderr):75 ! INFO:root:COMMITEND -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1125814] New: [Build 20190125] YaST2 keyboard module applies settings even when Cancel button is pressed
by bugzilla_noreply＠novell.com 21 Sep '22

21 Sep '22

http://bugzilla.suse.com/show_bug.cgi?id=1125814 Bug ID: 1125814 Summary: [Build 20190125] YaST2 keyboard module applies settings even when Cancel button is pressed Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: riafarov(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Created attachment 797088 --> http://bugzilla.suse.com/attachment.cgi?id=797088&action=edit YaST logs ## Steps to reproduce: 1. Change X11 keyboard setting (e.g. run setxkbmap -layout us,ru) 2. Run yast2 keyboard module 3. English US is preselected 4. Press Cancel button 5. English US is set as a keyboard layout, so settings from step 1) are overwritten. Please, find logs in the attachment. -- You are receiving this mail because: You are on the CC list for the bug.

2 8