June 2019 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1114273] New: Broadband connection established but all packages dropped
by bugzilla_noreply＠novell.com 10 Jan '23

10 Jan '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1114273 Bug ID: 1114273 Summary: Broadband connection established but all packages dropped Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: dpbasti(a)wp.pl QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I tested https://bugzilla.opensuse.org/show_bug.cgi?id=1104571 on 2018.10.31 Tumbleweeed. The same result as on Leap15. All RX and all TX packages are dropped Connection is established, signal strength is good, IP is obtained, Routing is set to default gw received from 4g modem, DNS servers are also received. Cannot even ping gateway. The same setup works as soon as I boot Ubuntu with no different settings in NetworkManager. wwan0: flags=4291<UP,BROADCAST,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.111.71.20 netmask 255.255.255.248 broadcast 10.111.71.23 inet6 fe80::73fb:926a:b538:f135 prefixlen 64 scopeid 0x20<link> ether 7a:c6:53:8c:bf:03 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 1280 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 42 dropped 0 overruns 0 carrier 0 collisions 0 -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1123557] New: network:vpn/openvpn: Bug --suppress-timestamps unneeded in systemd unit file?
by bugzilla_noreply＠novell.com 09 Jan '23

09 Jan '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1123557 Bug ID: 1123557 Summary: network:vpn/openvpn: Bug --suppress-timestamps unneeded in systemd unit file? Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: 3rd party software Assignee: max(a)suse.com Reporter: jon.brightwell(a)zpg.co.uk QA Contact: bnc-team-screening(a)forge.provo.novell.com CC: nirmoy.das(a)suse.com Found By: --- Blocker: --- It makes logging hard (no timestamps!) and doesn't seem to affect journalctl. I changed mine to ExecStart=/usr/sbin/openvpn --daemon --writepid /run/openvpn/%i.pid --cd /etc/openvpn/ --config %i.conf Does it also need a wait so it doesn't spit of these openvpn(a)lab.service: PID file /run/openvpn/lab.pid not readable (yet?) after start: No such file or directory -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1052765] New: net-snmp still use SysVinit boot scripts
by bugzilla_noreply＠novell.com 06 Jan '23

06 Jan '23

http://bugzilla.suse.com/show_bug.cgi?id=1052765 Bug ID: 1052765 Summary: net-snmp still use SysVinit boot scripts Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: All OS: openSUSE Factory Status: NEW Severity: Critical Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: werner(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Please port the boot script AFAP to systemd units: rpm -ql net-snmp | grep init\\.d /etc/init.d/snmpd /etc/init.d/snmptrapd this because as net-snmp will also reach SLES15 -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1133423] New: AutoYaST: repository priority not working in add-on section
by bugzilla_noreply＠novell.com 04 Jan '23

04 Jan '23

http://bugzilla.suse.com/show_bug.cgi?id=1133423 Bug ID: 1133423 Summary: AutoYaST: repository priority not working in add-on section Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: apoulat(a)vitechnology.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Created attachment 803606 --> http://bugzilla.suse.com/attachment.cgi?id=803606&action=edit add-on.xml Hi, I've just seen that, for example with attached add-on.xml given to AutoYaST, with, as you can see one repository with priority 20 and another with priority 10, they both, after install, have a (default) 99 priority (checked with "zypper -lr -p" command). See documentation about that here: https://doc.opensuse.org/projects/autoyast/#idm139966593990112 Note: I'm not sure on how <product> and <product_dir> tags are relevant then I tried without them and there is still the same issue. Thanks -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1029961] New: [META] Finalize /bin -> /usr/bin merge
by bugzilla_noreply＠novell.com 03 Jan '23

03 Jan '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1029961 Bug ID: 1029961 Summary: [META] Finalize /bin -> /usr/bin merge Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: daniel.molkentin(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Some packages still install files to /bin that are not symlinks. A "find /bin -type f -exec rpm -qf {} \; | sort -u" on a recent TW yields: bash-4.4-95.1.x86_64 dbus-1-1.10.16-1.1.x86_64 keyutils-1.5.9-5.33.x86_64 ksh-93v-6.15.x86_64 net-tools-deprecated-1.60-770.1.x86_64 procps-3.3.12-3.1.x86_64 psmisc-22.21-6.9.x86_64 rpm-4.13.0.1-1.1.x86_64 sash-3.8-2.8.x86_64 sysvinit-tools-2.88+-103.1.x86_64 tar-1.29-3.1.x86_64 tcsh-6.20.00-3.1.x86_64 util-linux-2.29.1-1.1.x86_64 vim-8.0.324-2.1.x86_64 These packages should all install their binaries to %_bindir, i.e. /usr/bin, and have a symlink in /bin. This would finalize the /bin deprecation. I am opening bugs for each of the packages. Once they are all closed, I'll close this one. -- You are receiving this mail because: You are on the CC list for the bug.

2 67

[Bug 1106751] New: iptables does not work with kernel-default-base
by bugzilla_noreply＠novell.com 23 Dec '22

23 Dec '22

http://bugzilla.suse.com/show_bug.cgi?id=1106751 Bug ID: 1106751 Summary: iptables does not work with kernel-default-base Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: fvogt(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Initially reported as https://github.com/kubic-project/automation/pull/474#issuecomment-417329301 Docker (and cri-o) do not work in Kubic VM images as iptables does not work: g47:~ # iptables -L iptables: No chain/target/match by that name. -- You are receiving this mail because: You are on the CC list for the bug.

2 49

[Bug 944832] New: installing updates during shutdown causes reboot
by bugzilla_noreply＠novell.com 22 Dec '22

22 Dec '22

http://bugzilla.suse.com/show_bug.cgi?id=944832 Bug ID: 944832 Summary: installing updates during shutdown causes reboot Classification: openSUSE Product: openSUSE Distribution Version: 42.1 Milestone 2 Hardware: x86-64 OS: Linux Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: ohering(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- fresh leap milestone 2. I switched from the iso install source to the online oss repo. This repo had a few differend packages compared to the iso. The gnome software installer recognized them as updates. Once I had to shutdown the system it offered a knob to install pending updates, then shutdown. I enabled that box, and hit return. I think nothing was downloaded, but the box did a reboot instead of the expected shutdown. If that feature is not ready yet I suggest to hide it for the time being to really and always do a reliable powerdown if that was requested. -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 1093592] New: redshift doesn't work after geoclue2 update
by bugzilla_noreply＠novell.com 16 Dec '22

16 Dec '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1093592 Bug ID: 1093592 Summary: redshift doesn't work after geoclue2 update Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: dmarcoux(a)posteo.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 770512 --> http://bugzilla.opensuse.org/attachment.cgi?id=770512&action=edit redshift error Hello, I updated to the latest snapshot (2018 05 15) and since then, redshift with geoclue2 doesn't work. After launching, it displays an error (see attachment). This wasn't happening with the previous snapshot I had, but I'm not sure which one. The issue seems to arise due to changes within the recent revisions of the geoclue2 package, so as far as 2 months ago. So by looking at the snapshots, I suspect it is in one of those: - 2018 03 04 - 2018 04 24 - 2018 05 11 - 2018 05 13 The workaround is to provide the latitude and longitude manually with the option -l. -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1111657] New: python-cffi build fail with glibc maintenance update
by bugzilla_noreply＠novell.com 14 Dec '22

14 Dec '22

http://bugzilla.suse.com/show_bug.cgi?id=1111657 Bug ID: 1111657 Summary: python-cffi build fail with glibc maintenance update Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: mlin(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- With glibc maintenance update https://build.opensuse.org/request/show/639803 , python-cffi build failed due to it can not pass unittest[1]. Both package are from SLE. [1] https://build.opensuse.org/package/live_build_log/openSUSE:Leap:15.1:Stagin… -- You are receiving this mail because: You are on the CC list for the bug.

2 31

[Bug 1138165] New: [TRACKERBUG] update osc to version 0.165.1
by bugzilla_noreply＠novell.com 07 Dec '22

07 Dec '22

http://bugzilla.suse.com/show_bug.cgi?id=1138165 Bug ID: 1138165 Summary: [TRACKERBUG] update osc to version 0.165.1 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: mschnitzer(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- This is a trackerbug for the version update of osc to version 0.165.1 -- You are receiving this mail because: You are on the CC list for the bug.

2 7