May 2019 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1135950] New: Wifi doesn't work after upgrading from Leap 42.3 to 15.1
by bugzilla_noreply＠novell.com 26 May '20

26 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1135950 Bug ID: 1135950 Summary: Wifi doesn't work after upgrading from Leap 42.3 to 15.1 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: runger(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 805746 --> http://bugzilla.suse.com/attachment.cgi?id=805746&action=edit dmesg localhost:/home/runger # hwinfo --wlan 20: PCI 200.0: 0282 WLAN controller [Created at pci.386] Unique ID: y9sn.rav4pDhPsA2 Parent ID: z8Q3.nLk2wA+vke2 SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Intel Wireless 8260" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x24f3 "Wireless 8260" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x0050 Revision: 0x3a Driver: "iwlwifi" Driver Modules: "iwlwifi" Device File: wlan0 Features: WLAN Memory Range: 0xddb00000-0xddb01fff (rw,non-prefetchable) IRQ: 127 (no events) HW Address: 34:f6:4b:7c:fa:65 Permanent HW Address: 34:f6:4b:7c:fa:65 Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00008086d000024F3sv00008086sd00000050bc02sc80i00" Driver Info #0: Driver Status: iwlwifi is active Driver Activation Cmd: "modprobe iwlwifi" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) localhost:/home/runger # dmesg | grep iwl [ 9.473739] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 9.491240] iwlwifi 0000:02:00.0: loaded firmware version 36.9f0a2d68.0 op_mode iwlmvm [ 9.541867] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 9.615902] iwlwifi 0000:02:00.0: base HW address: 34:f6:4b:7c:fa:65 [ 9.715463] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' wpa_supplicant.log: 1558535350.811011: wlan0: SME: Trying to authenticate with 44:48:c1:96:fa:f1 (SSID='MicroFocus' freq=5640 MHz) 1558535350.824847: wlan0: Trying to associate with 44:48:c1:96:fa:f1 (SSID='MicroFocus' freq=5640 MHz) 1558535350.833495: wlan0: Associated with 44:48:c1:96:fa:f1 1558535350.833544: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 1558535350.844454: wlan0: CTRL-EVENT-EAP-STARTED EAP authentication started 1558535350.878771: wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 1558535350.879084: wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 1558535351.004847: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=2 subject='/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance EV Root CA' hash=7431e5f4c3c1ce4690774f0b61e05440883ba9a01ed00ba6abd7806ed3b118cf 1558535351.006821: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert SHA2 High Assurance Server CA' hash=19400be5b7a31fb733917700789d2f0a2471c0c9d506c0e504c06c16d7cb17c0 1558535351.009088: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=GB/L=Newbury/O=Micro Focus (IP) Limited/CN=radius.wifi.microfocus.com' hash=e4edbaabf64951ee999f870e1cac89f5728e9eba421f7604e93a90f056635530 1558535351.010258: wlan0: CTRL-EVENT-EAP-PEER-ALT depth=0 DNS:radius.wifi.microfocus.com 1558535351.140889: EAP-TLV: TLV Result - Failure 1558535351.821713: wlan0: CTRL-EVENT-EAP-FAILURE EAP authentication failed 1558535351.875545: wlan0: CTRL-EVENT-DISCONNECTED bssid=44:48:c1:96:fa:f1 reason=23 1558535351.875649: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="MicroFocus" auth_failures=1 duration=10 reason=AUTH_FAILED 1558535351.876334: wlan1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD The WiFi works with a usb dongle so it seems to be a hardware related problem. -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1135254] New: libstdc++-v3's STL prettyprinters are not used by gdb
by bugzilla_noreply＠novell.com 26 May '20

26 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1135254 Bug ID: 1135254 Summary: libstdc++-v3's STL prettyprinters are not used by gdb Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: tdevries(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- So, by default we get: ... (gdb) p freqs $2 = {_M_t = { _M_impl = {<std::allocator<std::_Rb_tree_node<std::pair<char const, int> > >> = {<__gnu_cxx::new_allocator<std::_Rb_tree_node<std::pair<char const, int> > >> = {<No data fields>}, <No data fields>}, <std::_Rb_tree_key_compare<std::less<char> >> = { _M_key_compare = {<std::binary_function<char, char, bool>> = {<No data fields>}, <No data fields>}}, <std::_Rb_tree_header> = {_M_header = {_M_color = std::_S_red, _M_parent = 0x0, _M_left = 0x7fffffffdb18, _M_right = 0x7fffffffdb18}, _M_node_count = 0}, <No data fields>}}} ... instead of: ... (gdb) p freqs $1 = std::map with 0 elements ... Users can install this relatively easily (as described at https://sourceware.org/gdb/wiki/STLSupport) but it would be good to have a better out-of-the-box experience. Fedora does have this. -- You are receiving this mail because: You are on the CC list for the bug.

2 15

[Bug 1122483] New: Boringssl fails to build for aarch64
by bugzilla_noreply＠novell.com 25 May '20

25 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1122483 Bug ID: 1122483 Summary: Boringssl fails to build for aarch64 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: aarch64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Security Assignee: security-team(a)suse.de Reporter: guillaume.gardet(a)arm.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- You can check it out here: https://build.opensuse.org/package/show/openSUSE:Factory:ARM/boringssl Relevant build log errors are: [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc: In member function 'virtual void PerAEADTest_UnalignedInput_Test::TestBody()': [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:543:54: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t key[EVP_AEAD_MAX_KEY_LENGTH + 1]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:544:58: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t nonce[EVP_AEAD_MAX_NONCE_LENGTH + 1]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:545:39: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t plaintext[32 + 1]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:546:32: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t ad[32 + 1]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:564:75: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t ciphertext[sizeof(plaintext) + EVP_AEAD_MAX_OVERHEAD]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:572:45: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t out[sizeof(ciphertext)]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc: In member function 'virtual void PerAEADTest_Overflow_Test::TestBody()': [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:586:50: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t key[EVP_AEAD_MAX_KEY_LENGTH]; [ 240s] ^ -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1079603] New: VUL-1: freetype: Avoid NULL reference in src/truetype/ttinterp.c
by bugzilla_noreply＠novell.com 23 May '20

23 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1079603 Bug ID: 1079603 Summary: VUL-1: freetype: Avoid NULL reference in src/truetype/ttinterp.c Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.3 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Security Assignee: fstrba(a)suse.com Reporter: kbabioch(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- There is an upstream commit to avoid NULL references in src/truetype/ttinterp.c References: https://git.savannah.gnu.org/cgit/freetype/freetype2.git/commit/src/truetyp… https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=5736 -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 1007777] New: windows:mingw:win32/mingw32-libqt5-qtwebkit: Bug
by bugzilla_noreply＠novell.com 23 May '20

23 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1007777 Bug ID: 1007777 Summary: windows:mingw:win32/mingw32-libqt5-qtwebkit: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: rafal.przemyslaw.malinowski(a)gmail.com Reporter: rafal.przemyslaw.malinowski(a)gmail.com QA Contact: opensuse-communityscreening(a)forge.provo.novell.com CC: fridrich.strba(a)bluewin.ch, fstrba(a)suse.com, hib(a)hiberis.nl, idonmez(a)suse.com, mkbosmans(a)gmail.com, tlillqvist(a)suse.com Found By: --- Blocker: --- Package does not build because of headers change. To fix apply: https://build.opensuse.org/package/view_file/home:rmalinowski:mingw32-qt5-k… -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1125105] New: weblate: package-translations lt : bad string
by bugzilla_noreply＠novell.com 22 May '20

22 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1125105 Bug ID: 1125105 Summary: weblate: package-translations lt : bad string Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Translations Assignee: ke(a)suse.com Reporter: ke(a)suse.com QA Contact: ke(a)suse.com Found By: --- Blocker: --- ATM, we cannot update package-translations because of a bad string: [ 180s] + msgfmt -o /home/abuild/rpmbuild/BUILDROOT/package-translations-84.87.20190208.4199a3f6-404.1.x86_64/usr/share/locale/en_US/LC_MESSAGES/package-translations-lt.mo - [ 180s] + msgcat --use-first lt/po/a.lt.po lt/po/aspell.lt.po lt/po/b.lt.po lt/po/c.lt.po lt/po/d.lt.po lt/po/e.lt.po lt/po/f.lt.po lt/po/g.lt.po lt/po/ghc.lt.po lt/po/gnome.lt.po lt/po/golang.lt.po lt/po/google.lt.po lt/po/gstreamer.lt.po lt/po/gtk.lt.po lt/po/h.lt.po lt/po/i.lt.po lt/po/j.lt.po lt/po/k.lt.po lt/po/kde.lt.po lt/po/l.lt.po lt/po/leechcraft.lt.po lt/po/lib.lt.po lt/po/libqt.lt.po lt/po/libreoffice.lt.po lt/po/m.lt.po lt/po/mate.lt.po lt/po/myspell.lt.po lt/po/n.lt.po lt/po/o.lt.po lt/po/p.lt.po lt/po/patterns.lt.po lt/po/perl.lt.po lt/po/php.lt.po lt/po/python.lt.po lt/po/q.lt.po lt/po/r.lt.po lt/po/rubygem.lt.po lt/po/s.lt.po lt/po/t.lt.po lt/po/tesseract.lt.po lt/po/texlive-specs.lt.po lt/po/texlive.lt.po lt/po/u.lt.po lt/po/v.lt.po lt/po/w.lt.po lt/po/wx.lt.po lt/po/x.lt.po lt/po/xfce4.lt.po lt/po/y.lt.po lt/po/yast2.lt.po lt/po/z.lt.po [ 187s] <stdin>:373: 'msgid' and 'msgstr' entries do not both end with '\n' [ 187s] msgfmt: found 1 fatal error [ 187s] error: Bad exit status from /var/tmp/rpm-tmp.DyWpVy (%install) -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1068348] New: X11:Wayland/libinput: Bug
by bugzilla_noreply＠novell.com 22 May '20

22 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1068348 Bug ID: 1068348 Summary: X11:Wayland/libinput: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: duwe(a)suse.com Reporter: mw-novell(a)wzff.de QA Contact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- Ever since I upgraded my system to libinput 1.9.x (tumbleweed), when I would put my laptop (HP Elitebook 8470p) into the docking station, both the internal and external keyboards wouldn't work until I undock the laptop again. Compiling 1.8.4 and downgrading to my own package fixed the issue. I therefore assume that libinput is actually the culprit. -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1129328] New: 15.1beta zypper dup from 416.2 (20190219) to 426.2 (20190311) trashed GPT
by bugzilla_noreply＠novell.com 22 May '20

22 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1129328 Bug ID: 1129328 Summary: 15.1beta zypper dup from 416.2 (20190219) to 426.2 (20190311) trashed GPT Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: mrmazda(a)earthlink.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 800158 --> http://bugzilla.opensuse.org/attachment.cgi?id=800158&action=edit .tgz of various data: GPT repair log, .bash_history tail, fstab, /boot/default/grub, grub.cfg, efibootmgr -v, parted -l, recent journal files, dmidecode, more The repair log contained in the attachment contains a visual record of sector 0 prior to successfully regenerating the partition table. Several sectors following looked similar. Original summary: 15.1beta zypper dup from 416.2 (20190219) to 426.2 (20190311) trashed GPT For the record, I'm filing this so that the cause might be determined, and fixed. I'm guessing intentionally not having the ESP partition mounted plays a significant part. Intentional recreation I'd be unlikely to attempt even if possible. I've never before had a partition table trashed by an upgrade. Fixing was easy only after considerable time was spent determining how to fix. Short form "creation" procedure and results: 1-zypper dup 15.1beta on sda9 from 416.2 to 426.2 2-reboot 3-select 15.1 stanza from default UEFI TW Grub custom.cfg on sda7 Actual behavior: 1-UEFI detours into setup 2-GPT sectors are mostly filled with something other than boot code 3-no 55 AA at end of sector 0 4-no protective table entry 5-nothing to boot from https://forums.opensuse.org/showthread.php/535286-15-1-dup-to-426-2-from-41… continues my problem description initialized at https://forums.opensuse.org/showthread.php/535180-Leap-15-1-Beta-Please-pos… Motherboard: https://www.asus.com/us/Motherboards/PRIME-B250M-C-CSM/ -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1085805] New: Add vulkan 32-bit package
by bugzilla_noreply＠novell.com 22 May '20

22 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1085805 Bug ID: 1085805 Summary: Add vulkan 32-bit package Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Minor Priority: P5 - None Component: Maintenance Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: zenitur(a)ya.ru QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Wine 3.3 now depends of vulkan. Please add vulkan-32bit package. -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1012272] New: Cannot open Flatpak Bundles with Gnome-Software
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1012272 Bug ID: 1012272 Summary: Cannot open Flatpak Bundles with Gnome-Software Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: Antoine.Saroufim(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Opening .flatpak bundles via gnome-software does absolutely nothing. Gnome-software doesn't even launch or start. Flatpak bundles are also not automatically detected as a type of file that can be opened with gnome-software. Currently using GNOME 3.22.2 on Tumbleweed (fully updated to the latest snapshot) -- You are receiving this mail because: You are on the CC list for the bug.

2 5