May 2019 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1134325] New: Cannot close window when in "toggle present windows" mode
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1134325 Bug ID: 1134325 Summary: Cannot close window when in "toggle present windows" mode Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: 64bit OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: stroncea.nicolae(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When in the "toggle present windows" mode, if you move the pointer to the top right corner of a window, the red x button appears and you can close a window. When pressed, everything glitches for about 2-3 seconds, before the window finally closes. I remember KDE NEON hat this bug as well, but then they fixed it in one of their recent releases. The behaviour should instead be smooth. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1129587] NIS / ypbind fails to start
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1129587 http://bugzilla.suse.com/show_bug.cgi?id=1129587#c18 --- Comment #18 from Thorsten Kukuk <kukuk(a)suse.com> --- (In reply to Ludwig Nussel from comment #17) > So don't be childish. find a better solution then. If somebody is childisch, than it's you. We have a broken tool, which is doing things which it due to a bug not allowed to do. You propose now to workaround all consumers of the domainname syscall? This is not only ypbind, getdomainname(2) is not NIS specific. Fix the tool which is broken. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1129587] NIS / ypbind fails to start
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1129587 http://bugzilla.suse.com/show_bug.cgi?id=1129587#c17 --- Comment #17 from Ludwig Nussel <lnussel(a)suse.com> --- Looking at /usr/lib/ypbind/ypbind-systemd-pre I wonder what the broken tool is here. So don't be childish. find a better solution then. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133871] New: Count installs without using unique identifiers (UUIDs)
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1133871 Bug ID: 1133871 Summary: Count installs without using unique identifiers (UUIDs) Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: openSUSE Factory Status: NEW Severity: Normal Priority: P5 - None Component: libzypp Assignee: zypp-maintainers(a)forge.provo.novell.com Reporter: raphael.suse(a)jakse.fr QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hello, Fedora 30 has been released with a new privacy-friendly way of counting users. This solution has ben given a lot of thought and feedback. Here is some documentation about their solution: https://fedoraproject.org/wiki/Changes/DNF_Better_Counting According to https://en.opensuse.org/openSUSE:Statistics openSUSE uses UUID sent by zypper to count openSUSE installs. Though UUIDs are anonymous, they can still be used for tracking purposes even if openSUSE do not appear to do so. For instance, it makes it possible to know exactly which packages are installed on a machine using a particular UUID, which can give a lot of information, and exactly when a package is installed by each machine. One concern with dropping UUIDs would be that several openSUSE installs can share the same IP, which may lead to underestimations when counting, but Fedora's solution takes care or this issue, and also provides a way to not count short-lived / throwaway installs. The tracking feature can be disabled, but first, the user is not made aware of this feature, and second, a user can be willing to be counted without enabling any way of tracking. This bug report is a feature request to drop the usage of UUIDs in Zypper and adopt a new UUID-less mechanism such as the one used by Fedora. See also https://bugzilla.redhat.com/show_bug.cgi?id=1542060 -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1134321] New: Switching between virtual desktops causes severe stuttering
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1134321 Bug ID: 1134321 Summary: Switching between virtual desktops causes severe stuttering Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Minor Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: stroncea.nicolae(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When I use the touchpad(2 finger scroll) to switch between virtual desktops, the desktop stutters severely in-between the 2 desktops for a couple of seconds, and then finally switches. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1129587] NIS / ypbind fails to start
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1129587 http://bugzilla.suse.com/show_bug.cgi?id=1129587#c16 --- Comment #16 from Thorsten Kukuk <kukuk(a)suse.com> --- (In reply to Ludwig Nussel from comment #15) > There's already /usr/lib/ypbind/ypbind-systemd-pre anyways. Sorry, but I will not add ugly hacks to ypbind to workaround broken tools, especially as NIS was never designed to work together with something like NetworkManager. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1107617] udev: fix default value of udev.children-max
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1107617 http://bugzilla.suse.com/show_bug.cgi?id=1107617#c26 --- Comment #26 from LTC BugProxy <bugproxy(a)us.ibm.com> --- ------- Comment From nevdull(a)us.ibm.com 2019-05-06 18:19 EDT------- SUSE - I have access to our 64TB , 1536 cpu machine this week. It is currently running Linux linux-bpkd 4.12.14-193-default #1 SMP Tue Apr 9 13:29:32 UTC 2019 (85c4156) ppc64le ppc64le ppc64le GNU/Linux If you have a modified udev you'd like me to try, or additional data you'd like me to collect, let me know. With the release-provided udev, the default timeout of 90 sec is currently not enough to discover the console, (LVM) root, or (LVM) swap before dropping into emergency mode, but changing the timeout to 5 min (600 seconds) seems to be sufficient now. Previous releases, however, had required a timeout of 1800 or 2400 seconds because we seemed to be encountering a thundering herd (see SUSE 1103094) that resulted in unnaturally long delays. It's not clear why the behavior changed. While those excesses are no longer the default, I discovered they can be artificially induced for test purposes in the current release by specifying udev.children-max=200000 as a boot argument. What is the default timeout in the new systemd? While a timeout of 600 seconds or more may be overkill for laptops and even many rack machines, we may wish to have this behavior documented for installation of large configurations (if it isn't already.) -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133294] LTO: xorg-x11-server build fails
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1133294 http://bugzilla.suse.com/show_bug.cgi?id=1133294#c7 Stefan Dirsch <sndirsch(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Component|Basesystem |X.Org QA Contact|qa-bugs(a)suse.de |xorg-maintainer-bugs@forge. | |provo.novell.com --- Comment #7 from Stefan Dirsch <sndirsch(a)suse.com> --- Ok. Just changing component ... -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133082] AUDIT-0: fwupd: updating build to 1.2.7 needs new polkit privileges
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1133082 http://bugzilla.suse.com/show_bug.cgi?id=1133082#c16 --- Comment #16 from Swamp Workflow Management <swamp(a)suse.de> --- This is an autogenerated message for OBS integration: This bug (1133082) was mentioned in https://build.opensuse.org/request/show/701290 Factory / polkit-default-privs -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133294] LTO: xorg-x11-server build fails
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1133294 http://bugzilla.suse.com/show_bug.cgi?id=1133294#c6 Martin Liška <martin.liska(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|sndirsch(a)suse.com |martin.liska(a)suse.com Flags|needinfo?(martin.liska@suse | |.com) | --- Comment #6 from Martin Liška <martin.liska(a)suse.com> --- Please leave it assigned to me.. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1130502] New: libyui-qt{,-pkg,graph} does not build with Qt 5.13
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1130502 Bug ID: 1130502 Summary: libyui-qt{,-pkg,graph} does not build with Qt 5.13 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: fvogt(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Qt 5.13 marked quite a lot as deprecated. As libyui builds with -Werror, that leads to build failures such as: [ 65s] /home/abuild/rpmbuild/BUILD/libyui-qt-2.49.16/src/QY2Styler.cc: In member function 'void QY2Styler::renderParent(QWidget*)': [ 65s] /home/abuild/rpmbuild/BUILD/libyui-qt-2.49.16/src/QY2Styler.cc:362:46: error: 'static bool QPixmapCache::find(const QString&, QPixmap&)' is deprecated: Use bool find(const QString &, QPixmap *) instead [-Werror=deprecated-declarations] [ 65s] if ( QPixmapCache::find( key, scaled ) ) https://build.opensuse.org/package/live_build_log/openSUSE:Factory:Staging:… You can find Qt 5.13 Beta 1 packages for 15.0 and TW in obs://KDE:Qt:5.13/ -- You are receiving this mail because: You are on the CC list for the bug.

1 9

[Bug 1133294] LTO: xorg-x11-server build fails
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1133294 http://bugzilla.suse.com/show_bug.cgi?id=1133294#c5 Stefan Dirsch <sndirsch(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(martin.liska@suse | |.com) --- Comment #5 from Stefan Dirsch <sndirsch(a)suse.com> --- (In reply to Martin Liška from comment #4) > > > > I'm afraid bugreports on bugs.freedesktop.org are meanwhile completely > > ignored. :-( Existing bugreports have been transferred > > to issue tracker of gitlab.fdo ... > > Done: > https://gitlab.freedesktop.org/xorg/xserver/issues/687 Thanks a lot! I'm watching this issue now. Can I close this bug now? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1097207] New: Resize issues with GLX windows with i965 and sw drivers
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1097207 Bug ID: 1097207 Summary: Resize issues with GLX windows with i965 and sw drivers Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org Assignee: xorg-maintainer-bugs(a)forge.provo.novell.com Reporter: fvogt(a)suse.com QA Contact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- There are weird redraw issued when resizing qmlscene windows on i965 machines and with LIBGL_ALWAYS_SOFTWARE=1. To reproduce, write import QtQuick 2.0 Rectangle { width: 200 height: 200 color: "red" } into test.qml and run qmlscene test.qml. When maximizing the window and restoring the size again, the window turns white. Resizing the window results in artifacts in many cases. Dragging the window onto a different monitor fixes it until the next resize. This does not happen on a nvidia workstation with the nouveau driver. It happens there with LIBGL_ALWAYS_SOFTWARE=1 though. On a machine with i965 and nouveau, the bug appears with LIBGL_ALWAYS_SOFTWARE=1, DRI_PRIME=1 and no envars. I'm not sure where in the stack the bug is as I was unable to collect any meaningful information on this behaviour. -- You are receiving this mail because: You are on the CC list for the bug.

1 15

[Bug 1029527] zypper outputs the message: "warning: Unsupported version of key: V3"
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1029527 http://bugzilla.suse.com/show_bug.cgi?id=1029527#c14 --- Comment #14 from Michael Andres <ma(a)suse.com> --- @V3 gpg key: In the log I can see that initially 'gpg-pubkey-3d25d3d9-36e12d04' was present in the rpm database. This is a well known old V3 version gpg key and it's presence in the database is causing the 'Unsupported version of key' warnings. If the V3 warnings are gone, the key was most probably removed or updated (this is not visible in the log). In case of doubt, use 'rpm -q gpg-pubkey-3d25d3d9-36e12d04' to check whether is present and 'rpm -e gpg-pubkey-3d25d3d9-36e12d04' to remove it. The key disturbs and is not needed anymore. @rpm error: In the log I see rpm-4.14.2.1-4.1.x86_64.rpm being installed during the update. This new rpm version is then used to further update a bunch of packages until it fails on xscope-1.4.1-6.1.x86_64 ==> xscope-1.4.1-3.15.x86_64(openSUSE-tumbleweed-oss) In fact rpm 'was killed by signal 11 (Neoprávněný přístup do paměti (SIGSEGV))'. When reporting the error libzypp collects whatever rpm wrote to it's stderr, assuming it may be helpful to figure out the reson. But here I suppose the presence of the V3 warning is just a coincidence and not the actual reason for rpms crash. It's a known fact that mixing especially libraries from opensuse and tumbleweed does not work well. If the issues are gone after the system was fully updated to TW this may have been the reason. If the issues persist we may need to have a closer look at rpm. As Michael suggested in c#9, 'rpm --rebuilddb' should be used to make sure rpm and the rpm db are ok. If this does not succeed your system is in danger being damaged again. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133082] AUDIT-0: fwupd: updating build to 1.2.7 needs new polkit privileges
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1133082 http://bugzilla.suse.com/show_bug.cgi?id=1133082#c15 --- Comment #15 from Matthias Gerstner <matthias.gerstner(a)suse.com> --- Okay I've looked at the additional rule and it also is sane. An updated whitelisting is on its way to Factory. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1127468] Option "Probe foreign OS" Set But No Effect
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1127468 http://bugzilla.opensuse.org/show_bug.cgi?id=1127468#c7 --- Comment #7 from Michael Chang <mchang(a)suse.com> --- Created attachment 804365 --> http://bugzilla.opensuse.org/attachment.cgi?id=804365&action=edit grub.cfg right after reboot from installation -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1127468] Option "Probe foreign OS" Set But No Effect
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1127468 http://bugzilla.opensuse.org/show_bug.cgi?id=1127468#c6 --- Comment #6 from Michael Chang <mchang(a)suse.com> --- Created attachment 804364 --> http://bugzilla.opensuse.org/attachment.cgi?id=804364&action=edit y2log during installation -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1127468] Option "Probe foreign OS" Set But No Effect
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1127468 http://bugzilla.opensuse.org/show_bug.cgi?id=1127468#c5 Michael Chang <mchang(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |holgi(a)suse.com Flags|needinfo?(mchang(a)suse.com) |needinfo?(holgi(a)suse.com) --- Comment #5 from Michael Chang <mchang(a)suse.com> --- (In reply to Michael Chang from comment #3) > (In reply to Jiri Srain from comment #1) > No clue. I will setup a vm to see if it can be reproduced. No. Not reproducible. I created the setup similar to Holger's and after installation all foreign distribution are probed without any hassle. I will attach y2log during installation and grub.cfg right after installation for reference. Hi Holger, I am using openSUSE-Leap-15.1-DVD-x86_64-Build468.1-Media.iso to test. Would you please test if the problem persist ? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133294] LTO: xorg-x11-server build fails
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1133294 http://bugzilla.suse.com/show_bug.cgi?id=1133294#c4 --- Comment #4 from Martin Liška <martin.liska(a)suse.com> --- > > I'm afraid bugreports on bugs.freedesktop.org are meanwhile completely > ignored. :-( Existing bugreports have been transferred > to issue tracker of gitlab.fdo ... Done: https://gitlab.freedesktop.org/xorg/xserver/issues/687 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1132943] Kernel 5.0.8: xhci_hcd and thunderbolt modules are crashing
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1132943 http://bugzilla.suse.com/show_bug.cgi?id=1132943#c33 --- Comment #33 from Swamp Workflow Management <swamp(a)suse.de> --- This is an autogenerated message for OBS integration: This bug (1132943) was mentioned in https://build.opensuse.org/request/show/701275 15.1 / kernel-source -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1131752] X server dies after resuming from hibernation
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1131752 http://bugzilla.suse.com/show_bug.cgi?id=1131752#c41 --- Comment #41 from Stefan Dirsch <sndirsch(a)suse.com> --- (In reply to Stefan Dirsch from comment #38) > Interesting result. At least a workaround. Unfortunately I couldn't look > into your new file 1131752-20190624-debug.tbz yet. The person, who knows > where to copy it from hasn't answered yet. :-( If you could upload it to Currently the person is not responding. :-( I'm sorry! -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1131063] Prime select is broken, which makes nvidia useless. My game runs 100 fps below, what it used to.
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1131063 http://bugzilla.suse.com/show_bug.cgi?id=1131063#c6 Stefan Dirsch <sndirsch(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|IN_PROGRESS |RESOLVED Resolution|--- |NORESPONSE --- Comment #6 from Stefan Dirsch <sndirsch(a)suse.com> --- Still waiting for a response for more than a month now. Please reopen once you can provide the requested feedback. Thanks. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133294] LTO: xorg-x11-server build fails
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1133294 http://bugzilla.suse.com/show_bug.cgi?id=1133294#c3 --- Comment #3 from Stefan Dirsch <sndirsch(a)suse.com> --- (In reply to Martin Liška from comment #0) > Fails due to: > > [ 786s] events.c:605:49: error: array subscript -1 is below array bounds of > 'struct _Window *[16]' [-Werror=array-bounds] > > https://bugs.freedesktop.org/show_bug.cgi?id=110256 Could you please report this as an issue to https://gitlab.freedesktop.org/xorg/xserver/issues I'm afraid bugreports on bugs.freedesktop.org are meanwhile completely ignored. :-( Existing bugreports have been transferred to issue tracker of gitlab.fdo ... -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1134306] New: Default CONFIG_USB_OTG should not be set
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1134306 Bug ID: 1134306 Summary: Default CONFIG_USB_OTG should not be set Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: adm9988(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I am working on developing a OTG usb device, because default kernel config " CONFIG_USB_OTG=y", when I plug the OTG USB device to tumbleweed host(x86_64), It cause a problem, so I have to disable CONFIG_USB_OTG support, and recompile a new kernel to make it work. I believe usually we never use x86_64 as a OTG device, so may be we should disable OTG support as default! -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1120864] GCC 9: elfutils build fails on i586
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1120864 http://bugzilla.suse.com/show_bug.cgi?id=1120864#c2 --- Comment #2 from Swamp Workflow Management <swamp(a)suse.de> --- This is an autogenerated message for OBS integration: This bug (1120864) was mentioned in https://build.opensuse.org/request/show/701262 Factory / elfutils -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1134298] New: science/hdf5: wrong libname in hpc pkgconfig file
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1134298 Bug ID: 1134298 Summary: science/hdf5: wrong libname in hpc pkgconfig file Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: dmitry(a)roshchin.org Reporter: neyers(a)geod.uni-bonn.de QA Contact: bnc-team-screening(a)forge.provo.novell.com Found By: --- Blocker: --- The pkgconfig files contain wrong names for the shared libraries (they are prefixed with `lib`). grep "Libs" /usr/lib/hpc/gnu8/openmpi3/hdf5/1.10.4/lib64/pkgconfig/hdf5.pc Libs: -L${libdir} -llibhdf5 The libraries therefore cannot be found, e.g.: ml gnu hdf5 g++ $(pkg-config --libs hdf5) /usr/lib64/gcc/x86_64-suse-linux/8/../../../../x86_64-suse-linux/bin/ld: cannot find -llibhdf5 collect2: error: ld returned 1 exit status g++ -lhdf5 /usr/lib64/gcc/x86_64-suse-linux/8/../../../../x86_64-suse-linux/bin/ld: /usr/lib64/gcc/x86_64-suse-linux/8/../../../../lib64/crt1.o: in function `_start': /home/abuild/rpmbuild/BUILD/glibc-2.29/csu/../sysdeps/x86_64/start.S:104: undefined reference to `main' collect2: error: ld returned 1 exit status Cheers -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1128989] When vncmanager is running no user can log in locally, only remotely using VNC
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1128989 http://bugzilla.suse.com/show_bug.cgi?id=1128989#c6 Stefan Dirsch <sndirsch(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |NORESPONSE --- Comment #6 from Stefan Dirsch <sndirsch(a)suse.com> --- Still waiting for a response for more than a month now. Please reopen once you can provide the requested feedback. Thanks. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 935419] New: with 3 monitors on 2 graphic cards Xorg crash on xrandr change
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=935419 Bug ID: 935419 Summary: with 3 monitors on 2 graphic cards Xorg crash on xrandr change Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org Assignee: xorg-maintainer-bugs(a)forge.provo.novell.com Reporter: tcech(a)suse.com QA Contact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- I found some spare monitor and graphic card so I wanted to put that all together. I started with 2 monitors attached to Intel graphic card (probably onboard). In BIOS is integrated Intel graphics set as the primary video. HDMI 1 and HDMI 2 +--------+ +-----+ | 1920 | |1080 | | 1080 | |1920 | +--------+ | | | | +-----+ $ xrandr --output HDMI1 \ --mode 1920x1080 --primary \ --output HDMI2 \ --mode 1920x1080 --rotate left --right-of HDMI1 I connected third monitor to spare Radeon graphic card. I tried to write my configuration by hand but in the end I wiped all my changes to /etc/X11/xorg.conf.d and did reboot. Luckily XRandr shown all the monitors as hoped. Unfortunately, when I pass command like this, Xorg dies with SIGSEGV. $ xrandr --output DVI-1-0 --mode 1280x1024 --rotate left --right-of HDMI2 I tried to put it all into single command with the same result. Any workaround would be appreciated as well. GDB shown this backtrace (gdb) bt #0 DamageRegister (pDrawable=0x0, pDamage=0x25d8c80) at damage.c:1715 #1 0x00000000004bcd39 in xf86RotatePrepare (pScreen=0x2082ad0) at xf86Rotate.c:170 #2 xf86RotateRedisplay (pScreen=0x2082ad0) at xf86Rotate.c:191 #3 xf86RotateBlockHandler (pScreen=0x2082ad0, pTimeout=0x7ffc1fb04778, pReadmask=0x827300 <LastSelectMask>) at xf86Rotate.c:242 #4 0x0000000000441787 in BlockHandler (pTimeout=pTimeout@entry=0x7ffc1fb04778, pReadmask=pReadmask@entry=0x827300 <LastSelectMask>) at dixutils.c:390 #5 0x0000000000587cbc in WaitForSomething (pClientsReady=pClientsReady@entry=0x24f83a0) at WaitFor.c:215 #6 0x000000000043cda1 in Dispatch () at dispatch.c:361 #7 0x0000000000440e2b in dix_main (argc=10, argv=0x7ffc1fb04b78, envp=<optimized out>) at main.c:298 #8 0x00007f20ed1a08c5 in __libc_start_main (main=0x42c430 <main>, argc=10, argv=0x7ffc1fb04b78, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7ffc1fb04b68) at libc-start.c:289 #9 0x000000000042c469 in _start () at ../sysdeps/x86_64/start.S:118 note that pDrawable=0 in damage.c you can see it has to die: 1713 DamageRegister(DrawablePtr pDrawable, DamagePtr pDamage) 1714 { 1715 ScreenPtr pScreen = pDrawable->pScreen; I can provide whole coredump if you tell me where to upload it. I'm running Tumbleweed, versions installed: # LC_ALL=C LANG=C zypper se -si xorg Loading repository data... Reading installed packages... S | Name | Type | Version | Arch | Repository --+-----------------------------+---------+------------------+--------+------------------ i | xorg-cf-files | package | 1.0.5-5.1 | noarch | repo-oss i | xorg-scripts | package | 1.0.1-10.1 | noarch | repo-oss i | xorg-sgml-doctools | package | 1.11-9.1 | noarch | repo-oss i | xorg-x11 | package | 7.6_1-16.1 | noarch | repo-oss i | xorg-x11-Xvnc | package | 7.6_1.0.1-15.1.3 | x86_64 | (System Packages) i | xorg-x11-devel | package | 7.6-47.1 | noarch | repo-oss i | xorg-x11-driver-input | package | 7.6_1-13.1 | noarch | repo-oss i | xorg-x11-driver-video | package | 7.6_1-15.1 | x86_64 | repo-oss i | xorg-x11-essentials | package | 7.6_1-16.1 | noarch | repo-oss i | xorg-x11-fonts | package | 7.6-31.2 | noarch | repo-oss i | xorg-x11-fonts-core | package | 7.6-31.2 | noarch | repo-oss i | xorg-x11-libX11-ccache | package | 7.6-20.1 | noarch | repo-oss i | xorg-x11-server | package | 7.6_1.17.1-8.1 | x86_64 | repo-oss i | xorg-x11-server-debuginfo | package | 7.6_1.17.1-8.1 | x86_64 | repo-debug i | xorg-x11-server-debugsource | package | 7.6_1.17.1-8.1 | x86_64 | repo-debug i | xorg-x11-server-extra | package | 7.6_1.17.1-8.1 | x86_64 | repo-oss i | xorg-x11-util-devel | package | 7.6_1-10.1 | noarch | repo-oss -- You are receiving this mail because: You are on the CC list for the bug.

1 8

[Bug 1120914] allegro build failed on Leap 15.1
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1120914 http://bugzilla.opensuse.org/show_bug.cgi?id=1120914#c1 Ludwig Nussel <lnussel(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #1 from Ludwig Nussel <lnussel(a)suse.com> --- was fixed -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1132613] /etc/YaST2/ProductFeatures left over
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1132613 http://bugzilla.suse.com/show_bug.cgi?id=1132613#c23 Martin Vidner <mvidner(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|IN_PROGRESS |RESOLVED Resolution|--- |FIXED --- Comment #23 from Martin Vidner <mvidner(a)suse.com> --- RPM: yast2-packager-4.1.39 SR: https://build.opensuse.org/request/show/701254 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1132943] Kernel 5.0.8: xhci_hcd and thunderbolt modules are crashing
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1132943 http://bugzilla.suse.com/show_bug.cgi?id=1132943#c32 --- Comment #32 from Michael Pujos <pujos.michael(a)gmail.com> --- Confirming the problem is fixed in Kernel 5.0.11. Thanks ! -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1134285] New: English words squeezing together for GNOME help in zh_CN
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1134285 Bug ID: 1134285 Summary: English words squeezing together for GNOME help in zh_CN Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: yi.ying(a)suse.com QA Contact: qa-bugs(a)suse.de CC: yfjiang(a)suse.com, zcjia(a)suse.com Found By: --- Blocker: --- Created attachment 804344 --> http://bugzilla.suse.com/attachment.cgi?id=804344&action=edit help -> introduction to gnome For zh_CN, spaces are missing in untranslated parts of the GNOME help, which reduces readability. Format is normal for en_US. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133579] New: Package wrong URL prevents successful installation - LEAP 15
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1133579 Bug ID: 1133579 Summary: Package wrong URL prevents successful installation - LEAP 15 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: SUSE Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: tonysu(a)su-networking.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- compton-conf-lang-0.12.0-lp151.2.1.noar.rpm the URL is missing the LEAP version number as follows... http://download.opensuse.org/distribution/eap//repo/oss/ You can see in the above that the "15.1" is missing, and cannot succeed uness modified correctly Only experienced openSUSE Users can fix this problem on their own. so this problem can almost be considered "critical" and not just important -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1127468] Option "Probe foreign OS" Set But No Effect
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1127468 http://bugzilla.opensuse.org/show_bug.cgi?id=1127468#c4 --- Comment #4 from Michael Chang <mchang(a)suse.com> --- (In reply to Ludwig Nussel from comment #2) > Michael? Sorry somehow this escaped my attention. :( -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1127468] Option "Probe foreign OS" Set But No Effect
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1127468 http://bugzilla.opensuse.org/show_bug.cgi?id=1127468#c3 --- Comment #3 from Michael Chang <mchang(a)suse.com> --- (In reply to Jiri Srain from comment #1) > During installation, grub2-mkconfig prints following: > > 2019-02-25 11:06:32 <1> linux-fcss(3667) [Ruby] lib/cheetah.rb:158 Executing > "/usr/sbin/grub2-mkconfig -o /boot/grub2/grub.cfg". > 2019-02-25 11:06:32 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: Generating grub configuration file ... > 2019-02-25 11:06:33 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:33 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:33 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:33 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:34 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: Found theme: /boot/grub2/themes/openSUSE/theme.txt > 2019-02-25 11:06:34 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:34 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:34 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: Found linux image: /boot/vmlinuz-4.12.14-lp151.21-default > 2019-02-25 11:06:34 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: Found initrd image: /boot/initrd-4.12.14-lp151.21-default > 2019-02-25 11:06:35 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:35 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:35 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:37 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:37 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:38 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: Found Windows Boot Manager on > /dev/sda1(a)/EFI/Microsoft/Boot/bootmgfw.efi > 2019-02-25 11:06:38 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:38 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: WARNING: Failed to connect to lvmetad. Falling back to device > scanning. > 2019-02-25 11:06:38 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: Found openSUSE Leap 15.0 on /dev/mapper/system-system1 > 2019-02-25 11:06:40 <3> linux-fcss(3667) [Ruby] lib/cheetah.rb:206 Error > output: done > > The same durig the later configuration is without those WARNING lines. > Michael, can it be the reason why the generated menu does not include the > other operating systems even if they seem to have been detected? Those lvmtad warning is harmless. And since the output said Windows has been detected it should work. No clue. I will setup a vm to see if it can be reproduced. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1134048] New: lightdm assert.
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1134048 Bug ID: 1134048 Summary: lightdm assert. Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: carlos.e.r(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Log has on Leap 15.1 Beta (almost default install, XFCE): 2019-05-03T12:04:59.677869+02:00 Elesar lightdm[3662]: g_object_unref: assertion 'G_IS_OBJECT (object)' failed 2019-05-03T12:05:04.314281+02:00 Elesar lightdm[3662]: g_object_unref: assertion 'G_IS_OBJECT (object)' failed -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 1132247] New: libyui: merge the testing REST API framework
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1132247 Bug ID: 1132247 Summary: libyui: merge the testing REST API framework Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: lslezak(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- The testing REST API framework should be merged and released in Tumbleweed so the openQA maintainers can start using it. -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1134148] New: "Back" does not work in Step "System role"
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1134148 Bug ID: 1134148 Summary: "Back" does not work in Step "System role" Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: SKerres(a)Kerres-edv.de QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- If you install a system and you reached the step "systemrole" you cant go back to the previous screen, if you want to change e.g. the network settings. What happend: I configured the network and forgot to specify the default gateway. I got an error message, that the online repositories are not accessible and the window is the system role dialog. When I press "back", the message appears again and you are back in "system role". So I switched to the terminal (tty2), I added the gateway manually, switched back to the installation (tty7) and selected "back" again. Now, I was able to select the online repositories and continue the installation. -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1107617] udev: fix default value of udev.children-max
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1107617 Hanns-Joachim Uhl <hannsj_uhl(a)de.ibm.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |diego.assencio(a)suse.com, | |ihno(a)suse.com, | |msuchanek(a)suse.com, | |ptesarik(a)suse.com -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1107617] udev: fix default value of udev.children-max
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1107617 Hanns-Joachim Uhl <hannsj_uhl(a)de.ibm.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Blocks| |1131482 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133412] New: [461.2][ru] Patterns not fully translated to Russian
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1133412 Bug ID: 1133412 Summary: [461.2][ru] Patterns not fully translated to Russian Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Minor Priority: P5 - None Component: Translations Assignee: ke(a)suse.com Reporter: anton.smorodskyi(a)suse.com QA Contact: ke(a)suse.com Found By: --- Blocker: --- In installation summary patterns list "Minimal Base System" is not translated to Russian while "Enhanced Based System" is translated -- You are receiving this mail because: You are on the CC list for the bug.

1 5

[Bug 1128546] 'Unable to handle kernel paging request at virtual address ffffd5023df74718' error on iptable
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.novell.com/show_bug.cgi?id=1128546 http://bugzilla.novell.com/show_bug.cgi?id=1128546#c35 --- Comment #35 from Denis Kirjanov <denis.kirjanov(a)suse.com> --- I've checked the 1131864, Hmm.. looks like it's related to arm64 -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1134128] qt3 packman update brakes KDE3 widget style in personal settings
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1134128 http://bugzilla.suse.com/show_bug.cgi?id=1134128#c1 Max Lin <mlin(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |INVALID Assignee|mlin(a)suse.com |bnc-team-screening(a)forge.pr | |ovo.novell.com --- Comment #1 from Max Lin <mlin(a)suse.com> --- Packman issue is not related to openSUSE, you should report your issue to their mailing list or so, and we didn't releasing KDE3/Qt3 in Leap 15. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1127468] Option "Probe foreign OS" Set But No Effect
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1127468 http://bugzilla.opensuse.org/show_bug.cgi?id=1127468#c2 --- Comment #2 from Ludwig Nussel <lnussel(a)suse.com> --- Michael? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1078466] systemd: duplicated entries in tmpfiles.d
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1078466 http://bugzilla.suse.com/show_bug.cgi?id=1078466#c30 --- Comment #30 from Franck Bui <fbui(a)suse.com> --- We can move the definitions wherever it's most appropriate but the point is to keep them all in the same package IMHO. Currently they're spread over filesystem (or aaa_base or ...) and systemd. It would make more sense to have them all kept by either systemd or "whatever". The conf files shipped by systemd and which contain generic paths are: /usr/lib/tmpfiles.d/etc.conf /usr/lib/tmpfiles.d/home.conf /usr/lib/tmpfiles.d/legacy.conf /usr/lib/tmpfiles.d/tmp.conf /usr/lib/tmpfiles.d/var.conf /usr/lib/tmpfiles.d/x11.conf Except for etc.conf which might be a special case, all definitions are for generic path that should also belong to somewhere else. WDYT ? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133307] gimp: don't recommend gimp-plugins-python, it pulls in python2
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1133307 http://bugzilla.opensuse.org/show_bug.cgi?id=1133307#c3 Ludwig Nussel <lnussel(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #3 from Ludwig Nussel <lnussel(a)suse.com> --- done -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133137] New: openSUSE:Leap:15.1/python-csvkit failed
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1133137 Bug ID: 1133137 Summary: openSUSE:Leap:15.1/python-csvkit failed Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other URL: https://build.opensuse.org/package/live_build_log/open SUSE:Leap:15.1/python-csvkit/standard/x86_64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: mcepl(a)suse.com Reporter: lnussel(a)suse.com QA Contact: qa-bugs(a)suse.de CC: tchvatal(a)suse.com Found By: --- Blocker: --- openSUSE:Leap:15.1/python-csvkit failed to build. Please see build log: https://build.opensuse.org/package/live_build_log/openSUSE:Leap:15.1/python… [ 76s] [ 76s] ====================================================================== [ 76s] FAIL: test_before_after_insert (tests.test_utilities.test_csvsql.TestCSVSQL) [ 76s] ---------------------------------------------------------------------- [ 76s] Traceback (most recent call last): [ 76s] File "/home/abuild/rpmbuild/BUILD/csvkit-1.0.4/tests/test_utilities/test_csvsql.py", line 200, in test_before_after_insert [ 76s] self.assertEqual(output, 'a,b,c\n1,2,3\n0,5,6\n') [ 76s] AssertionError: 'a,b,c\n1,2.0,3.0\n0,5.0,6.0\n' != 'a,b,c\n1,2,3\n0,5,6\n' [ 76s] [ 76s] ====================================================================== [ 76s] FAIL: test_linenumbers (tests.test_utilities.test_sql2csv.TestSQL2CSV) [ 76s] ---------------------------------------------------------------------- [ 76s] Traceback (most recent call last): [ 76s] File "/home/abuild/rpmbuild/BUILD/csvkit-1.0.4/tests/test_utilities/test_sql2csv.py", line 140, in test_linenumbers [ 76s] self.assertTrue('1,1,2,3' in csv) [ 76s] AssertionError: False is not true -- You are receiving this mail because: You are on the CC list for the bug.

1 2

[Bug 1128707] [Build 20190310] Element profile has extra content: add-on
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1128707 http://bugzilla.suse.com/show_bug.cgi?id=1128707#c11 Stefan Schubert <schubi(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution|--- |FIXED --- Comment #11 from Stefan Schubert <schubi(a)suse.com> --- Submitted new yast2-schema: SR 192083 I have seen that the uesed ISO in OpenQA includes jing now. What about using it instead of xmllint ? The output is much more better. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1133239] New: LTO: libqt4 build fails
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1133239 Bug ID: 1133239 Summary: LTO: libqt4 build fails Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: martin.liska(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Fails due to: [ 2898s] /usr/lib64/gcc/x86_64-suse-linux/9/../../../../x86_64-suse-linux/bin/ld: /tmp/libQtScript.so.4.8.7.1AX6os.ltrans0.ltrans.o: in function `ctiVMThrowTrampoline': [ 2898s] <artificial>:(.text+0x4c): undefined reference to `cti_vm_throw' -- You are receiving this mail because: You are on the CC list for the bug.

1 4

[Bug 1107617] udev: fix default value of udev.children-max
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=1107617 http://bugzilla.suse.com/show_bug.cgi?id=1107617#c25 Franck Bui <fbui(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(martin.wilck@suse | |.com) | --- Comment #25 from Franck Bui <fbui(a)suse.com> --- Clearing the requested info on Martin as it has become obsolete now. -- You are receiving this mail because: You are on the CC list for the bug.

1 0