May 2019 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1100410] New: Environment Modules does not install global profile files
by bugzilla_noreply＠novell.com 03 Jun '20

03 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1100410 Bug ID: 1100410 Summary: Environment Modules does not install global profile files Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: zed.three(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The version of Environment Modules in Tumblweed does not install the global profile init files (modules.{sh,csh}) under /etc/profile.d, so the `module` command is not available on login. The previous version in Leap 15 does install these files. -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1121809] New: No audio over HDMI ( Lenovo Thinkpad P52, Quadro P2000)
by bugzilla_noreply＠novell.com 02 Jun '20

02 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1121809 Bug ID: 1121809 Summary: No audio over HDMI ( Lenovo Thinkpad P52, Quadro P2000) Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: rombert(a)apache.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 794340 --> http://bugzilla.opensuse.org/attachment.cgi?id=794340&action=edit Kernel log I have switched laptops from a Lenovo W541 to a Lenovo P52. HDMI audio was working just fine with the old laptop but it does not work with the new one. The Gnome settings panel correctly lists the 4 HDMI sound devices and I am able to select them, but no sound is played. With pavucontrol the DP-3 device is correctly identified as the one that is connected. aplay -l lists all the devices. I am seeing some error in the kernel log ( full dmesg attached ), such as: [23583.964237] snd_hda_codec_hdmi hdaudioC1D0: Unable to sync register 0x4f0100. -5 [23583.964250] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD buf size -1 [23586.521254] snd_hda_codec_hdmi hdaudioC1D0: out of range cmd 0:4:707:ffffffff -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 1087982] New: XFCE Terminal does not update the tittle correctly because of error in /etc/bash.bashrc
by bugzilla_noreply＠novell.com 02 Jun '20

02 Jun '20

http://bugzilla.suse.com/show_bug.cgi?id=1087982 Bug ID: 1087982 Summary: XFCE Terminal does not update the tittle correctly because of error in /etc/bash.bashrc Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: carlos.e.r(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- This is a repeat of Bug 1076927, but for Leap 15.0, so that it can be solved before release. Photo of issue. See attachment 756971 The XFCE Terminal application does not update the tittle correctly. For instance, I "su -" but the tittle shows "terminal - user@hostname", where it should show "terminal - root@hostname" (see attached photo). This is affecting all releases since some update, from 42.2 and up to Tumbleweed. The problem is probably this. Compare "set | less" Settings on the XFCE term SHLVL=2 TERM=xterm-256color UID=1000 USER=cer ... ppwd () { true } but on (working) xterm: SHLVL=2 TERM=xterm TS1=$'\E7\E]2;%s@%s:%s\a\E]1;%s\a\E8' UID=1000 USER=cer ... ppwd () { local dir; local -i width; test -n "$TS1" || return; dir="$(dirs +0)"; let width=${#dir}-18; test ${#dir} -le 18 || dir="...${dir#$(printf "%.*s" $width "$dir")}"; if test ${#TS1} -gt 17; then printf "$TS1" "$USER" "$HOST" "$dir" "$HOST"; else printf "$TS1" "$USER" "$HOST" "$dir"; fi } It appears to be set or not in /etc/bash.bashrc # Set xterm prompt with short path (last 18 characters) # if path tput hs 2>/dev/null || path tput -T $TERM+sl hs 2>/dev/null ; then ... unset _isl _tsl _fsl _sc _rc ppwd () { local dir local -i width test -n "$TS1" || return; dir="$(dirs +0)" let width=${#dir}-18 test ${#dir} -le 18 || dir="...${dir#$(printf "%.*s" $width "$dir")}" if test ${#TS1} -gt 17 ; then printf "$TS1" "$USER" "$HOST" "$dir" "$HOST" else printf "$TS1" "$USER" "$HOST" "$dir" fi } else ppwd () { true; } fi Minas-Anor:~ # rpm -qf /etc/bash.bashrc aaa_base-84.87+git20180208.8eeab90-lp150.2.1.x86_64 Minas-Anor:~ # This was working correctly till some update. -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1128601] New: trackerbug for fish3
by bugzilla_noreply＠novell.com 01 Jun '20

01 Jun '20

http://bugzilla.suse.com/show_bug.cgi?id=1128601 Bug ID: 1128601 Summary: trackerbug for fish3 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: simonf.lees(a)suse.com Reporter: meissner(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- fish3 inclusion into leap 15.0 -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1123871] New: Тне Elan1200 touchpad stops working (freezes) after several cursor movements or left and right buttons clicks.
by bugzilla_noreply＠novell.com 31 May '20

31 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1123871 Bug ID: 1123871 Summary: Тне Elan1200 touchpad stops working (freezes) after several cursor movements or left and right buttons clicks. Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: jackpat(a)hotbox.ru QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/69.0.3497.100 Safari/537.36 OPR/56.0.3051.52 Build Identifier: The touchpad Elan 1200 of the laptop ASUS VivoBook X505ZA-BQ422 with new-installed Leap 15 instead pre-installed operating system Endless freezes at the beginning of its use. In Endless OS the touchpad works properly. Reproducible: Always Steps to Reproduce: 1. A few movements of finger on the touchpad cause the cursor to hang. 2. Several pressing by finger on left or right buttons of touchpad give cursor freezing. 3. A few short touches to the touchpad panel give the same effect. Actual Results: The cursor on the screen freezes and does not respond to the use of the touchpad. Connected USB Optical Mouse Logitech M105 works fine. Expected Results: Software should provide touchpad operation. openSUSE Leap 15.0 KDE Plasma Version: 5.12.6 KDE Frameworks Version: 5.45.0 Qt Version: 5.9.4 Kernel Version: 4.12.14-lp150.12.45-default OS Type: 64-bit Processor: 4 x AMD Ryzen 3 2200U with Radeon Vega Mobile Gfx Memory: 14.7 GiB of RAM -- You are receiving this mail because: You are on the CC list for the bug.

2 15

[Bug 966057] New: RPM pacakges won't regenerate initrd on removal
by bugzilla_noreply＠novell.com 29 May '20

29 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=966057 Bug ID: 966057 Summary: RPM pacakges won't regenerate initrd on removal Classification: openSUSE Product: openSUSE Tumbleweed Version: 2015* Hardware: All OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: fvogt(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Currently there are two macros in /etc/rpm/macros.initrd: %regenerate_initrd_post, to be called in the %post and %postun sections and %regenerate_initrd_posttrans, to be called in %posttrans. %regenerate_initrd_post simply sets a flag that the initrd has to be rebuilt after the transaction. The posttrans macros takes care of that. Now, that works fine for installation (%post -> %posttrans) and upgrades (%postun -> %post -> %posttrans), but on removal, %posttrans is never run. How could that be implemented properly? -- You are receiving this mail because: You are on the CC list for the bug.

2 12

[Bug 1003939] New: enlightenment doesn't honor system locale
by bugzilla_noreply＠novell.com 28 May '20

28 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1003939 Bug ID: 1003939 Summary: enlightenment doesn't honor system locale Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: lnussel(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- - install Beta3 in different locale (German in this case) - select XFCE - in summary screen go to software, unselect XFCE and select Englightenment - first log in presents wizard which is only partially in German - Desktop ends up in US locale with US clock and US keyboard even though system settings say de_DE -- You are receiving this mail because: You are on the CC list for the bug.

2 15

[Bug 1130134] New: qemu user-mode emulation requires membarrier syscall
by bugzilla_noreply＠novell.com 27 May '20

27 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1130134 Bug ID: 1130134 Summary: qemu user-mode emulation requires membarrier syscall Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: josua.m(a)t-online.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Greetings everybody, Doing a little experiment with docker, I encountered this scary error message: This QEMU binary requires the membarrier system call. Please upgrade your system to a newer version of Linux So I believe the 4.12.y kernel of openSUSE does not have this feature. Therefore the solution appears to be rebuilding qemu-linux-user with --disable-membarrier. relevant part of Dockerfile: FROM arm32v7/openjdk:8-jre-alpine AS run COPY qemu-arm qemu-arm-binfmt /usr/bin/ RUN apk add bash bluez libc6-compat iptables I then rebuilt the qemu-linux-user package with s/--enable/membarrier/--disable-membarrier/ --> and the resulting binaries worked fine as expected. Please consider enabling the membarrier syscall in the kernel, or disable the feature in qemu builds for leap 15.1. -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1095795] New: acl package does not build reproducibly from gettext
by bugzilla_noreply＠novell.com 27 May '20

27 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1095795 Bug ID: 1095795 Summary: acl package does not build reproducibly from gettext Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: All OS: openSUSE Factory Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: pth(a)suse.com Reporter: bwiedemann(a)suse.com QA Contact: qa-bugs(a)suse.de CC: jeffm(a)suse.com Blocks: 1047218 Found By: Development Blocker: --- When building the 'acl' package twice (1 minute apart), results always differ and cause unnecessary rebuild and republish in OBS /usr/share/locale/en(a)quot/LC_MESSAGES/acl.mo differs (GNU message catalog (little endian), revision 0.0, 53 messages) @@ -290,8 +290,8 @@ 00001210 67 69 64 2d 42 75 67 73 2d 54 6f 3a 20 61 63 6c |gid-Bugs-To: acl| 00001220 2d 64 65 76 65 6c 40 6e 6f 6e 67 6e 75 2e 6f 72 |-devel(a)nongnu.or| 00001230 67 0a 50 4f 2d 52 65 76 69 73 69 6f 6e 2d 44 61 |g.PO-Revision-Da| -00001240 74 65 3a 20 32 30 31 38 2d 30 36 2d 30 34 20 30 |te: 2018-06-04 0| -00001250 39 3a 33 33 2b 30 30 30 30 0a 4c 61 73 74 2d 54 |9:33+0000.Last-T| +00001240 74 65 3a 20 32 30 33 33 2d 30 37 2d 30 36 20 32 |te: 2033-07-06 2| +00001250 32 3a 34 36 2b 30 30 30 30 0a 4c 61 73 74 2d 54 |2:46+0000.Last-T| 00001260 72 61 6e 73 6c 61 74 6f 72 3a 20 41 75 74 6f 6d |ranslator: Autom| and same for en@boldquot The problem goes away when leaving out the special 'en' translations in acl-2.2.52/po/LINGUAS -en@boldquot -en@quot but there is probably a nicer solution in gettext. maybe unrelated: something in gettext seems to use the COPYRIGHT_HOLDER value from acl-2.2.52/po/Makevars in a bad way to update the copyright line: +++ /home/abuild/rpmbuild/BUILD/acl-2.2.52/po/en(a)quot.po 2033-07-06 22:46:22.762783318 +0000 @@ -1,7 +1,7 @@ # English translations for acl package. -# Copyright (C) 2018 Silicon Graphics, Inc. +# Copyright (C) 2033 Silicon Graphics, Inc. # This file is distributed under the same license as the acl package. -# Automatically generated, 2018. +# Automatically generated, 2033. ... "Report-Msgid-Bugs-To: acl-devel(a)nongnu.org\n" -"POT-Creation-Date: 2018-06-04 09:33+0000\n" -"PO-Revision-Date: 2018-06-04 09:33+0000\n" +"POT-Creation-Date: 2033-07-06 22:46+0000\n" +"PO-Revision-Date: 2033-07-06 22:46+0000\n" -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1067478] New: clang-4.0.1 does not produce reproducible binaries
by bugzilla_noreply＠novell.com 27 May '20

27 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1067478 Bug ID: 1067478 Summary: clang-4.0.1 does not produce reproducible binaries Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: openSUSE Factory Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: bwiedemann(a)suse.com QA Contact: qa-bugs(a)suse.de CC: msrb(a)suse.com Blocks: 1061219 Found By: Development Blocker: --- minimal reproducer: osc co openSUSE:Factory/gnustep-libobjc2 cd $_ osc build --noservice chroot /var/tmp/build-root/standard-x86_64/ cd /home/abuild/rpmbuild/BUILD/libobjc2-1.8.1 head -n 348 arc.m > t.m for i in $(seq 4) ; do clang -c t.m 2>/dev/null ; md5sum t.o ; done Actual Results: af35c53170b6d118e1e78ed5b8f2529c t.o 5c1f40dc0874460958b0b05ed3a55f70 t.o de320e239b0feb5431a889ff187389a9 t.o de320e239b0feb5431a889ff187389a9 t.o When running setarch `arch` -R clang to disable ASLR or leaving out the last function in t.m (e.g. head -n 315 arc.m > t.m) it does produce consistent results. -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1135950] New: Wifi doesn't work after upgrading from Leap 42.3 to 15.1
by bugzilla_noreply＠novell.com 26 May '20

26 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1135950 Bug ID: 1135950 Summary: Wifi doesn't work after upgrading from Leap 42.3 to 15.1 Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: runger(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 805746 --> http://bugzilla.suse.com/attachment.cgi?id=805746&action=edit dmesg localhost:/home/runger # hwinfo --wlan 20: PCI 200.0: 0282 WLAN controller [Created at pci.386] Unique ID: y9sn.rav4pDhPsA2 Parent ID: z8Q3.nLk2wA+vke2 SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Intel Wireless 8260" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x24f3 "Wireless 8260" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x0050 Revision: 0x3a Driver: "iwlwifi" Driver Modules: "iwlwifi" Device File: wlan0 Features: WLAN Memory Range: 0xddb00000-0xddb01fff (rw,non-prefetchable) IRQ: 127 (no events) HW Address: 34:f6:4b:7c:fa:65 Permanent HW Address: 34:f6:4b:7c:fa:65 Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00008086d000024F3sv00008086sd00000050bc02sc80i00" Driver Info #0: Driver Status: iwlwifi is active Driver Activation Cmd: "modprobe iwlwifi" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) localhost:/home/runger # dmesg | grep iwl [ 9.473739] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 9.491240] iwlwifi 0000:02:00.0: loaded firmware version 36.9f0a2d68.0 op_mode iwlmvm [ 9.541867] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 9.615902] iwlwifi 0000:02:00.0: base HW address: 34:f6:4b:7c:fa:65 [ 9.715463] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' wpa_supplicant.log: 1558535350.811011: wlan0: SME: Trying to authenticate with 44:48:c1:96:fa:f1 (SSID='MicroFocus' freq=5640 MHz) 1558535350.824847: wlan0: Trying to associate with 44:48:c1:96:fa:f1 (SSID='MicroFocus' freq=5640 MHz) 1558535350.833495: wlan0: Associated with 44:48:c1:96:fa:f1 1558535350.833544: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 1558535350.844454: wlan0: CTRL-EVENT-EAP-STARTED EAP authentication started 1558535350.878771: wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 1558535350.879084: wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected 1558535351.004847: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=2 subject='/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance EV Root CA' hash=7431e5f4c3c1ce4690774f0b61e05440883ba9a01ed00ba6abd7806ed3b118cf 1558535351.006821: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert SHA2 High Assurance Server CA' hash=19400be5b7a31fb733917700789d2f0a2471c0c9d506c0e504c06c16d7cb17c0 1558535351.009088: wlan0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=GB/L=Newbury/O=Micro Focus (IP) Limited/CN=radius.wifi.microfocus.com' hash=e4edbaabf64951ee999f870e1cac89f5728e9eba421f7604e93a90f056635530 1558535351.010258: wlan0: CTRL-EVENT-EAP-PEER-ALT depth=0 DNS:radius.wifi.microfocus.com 1558535351.140889: EAP-TLV: TLV Result - Failure 1558535351.821713: wlan0: CTRL-EVENT-EAP-FAILURE EAP authentication failed 1558535351.875545: wlan0: CTRL-EVENT-DISCONNECTED bssid=44:48:c1:96:fa:f1 reason=23 1558535351.875649: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="MicroFocus" auth_failures=1 duration=10 reason=AUTH_FAILED 1558535351.876334: wlan1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD The WiFi works with a usb dongle so it seems to be a hardware related problem. -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1135254] New: libstdc++-v3's STL prettyprinters are not used by gdb
by bugzilla_noreply＠novell.com 26 May '20

26 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1135254 Bug ID: 1135254 Summary: libstdc++-v3's STL prettyprinters are not used by gdb Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: tdevries(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- So, by default we get: ... (gdb) p freqs $2 = {_M_t = { _M_impl = {<std::allocator<std::_Rb_tree_node<std::pair<char const, int> > >> = {<__gnu_cxx::new_allocator<std::_Rb_tree_node<std::pair<char const, int> > >> = {<No data fields>}, <No data fields>}, <std::_Rb_tree_key_compare<std::less<char> >> = { _M_key_compare = {<std::binary_function<char, char, bool>> = {<No data fields>}, <No data fields>}}, <std::_Rb_tree_header> = {_M_header = {_M_color = std::_S_red, _M_parent = 0x0, _M_left = 0x7fffffffdb18, _M_right = 0x7fffffffdb18}, _M_node_count = 0}, <No data fields>}}} ... instead of: ... (gdb) p freqs $1 = std::map with 0 elements ... Users can install this relatively easily (as described at https://sourceware.org/gdb/wiki/STLSupport) but it would be good to have a better out-of-the-box experience. Fedora does have this. -- You are receiving this mail because: You are on the CC list for the bug.

2 15

[Bug 1122483] New: Boringssl fails to build for aarch64
by bugzilla_noreply＠novell.com 25 May '20

25 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1122483 Bug ID: 1122483 Summary: Boringssl fails to build for aarch64 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: aarch64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Security Assignee: security-team(a)suse.de Reporter: guillaume.gardet(a)arm.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- You can check it out here: https://build.opensuse.org/package/show/openSUSE:Factory:ARM/boringssl Relevant build log errors are: [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc: In member function 'virtual void PerAEADTest_UnalignedInput_Test::TestBody()': [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:543:54: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t key[EVP_AEAD_MAX_KEY_LENGTH + 1]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:544:58: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t nonce[EVP_AEAD_MAX_NONCE_LENGTH + 1]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:545:39: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t plaintext[32 + 1]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:546:32: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t ad[32 + 1]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:564:75: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t ciphertext[sizeof(plaintext) + EVP_AEAD_MAX_OVERHEAD]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:572:45: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t out[sizeof(ciphertext)]; [ 240s] ^ [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc: In member function 'virtual void PerAEADTest_Overflow_Test::TestBody()': [ 240s] /home/abuild/rpmbuild/BUILD/boringssl-20181026/crypto/cipher_extra/aead_test.cc:586:50: error: requested alignment 64 is larger than 16 [-Werror=attributes] [ 240s] alignas(64) uint8_t key[EVP_AEAD_MAX_KEY_LENGTH]; [ 240s] ^ -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1079603] New: VUL-1: freetype: Avoid NULL reference in src/truetype/ttinterp.c
by bugzilla_noreply＠novell.com 23 May '20

23 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1079603 Bug ID: 1079603 Summary: VUL-1: freetype: Avoid NULL reference in src/truetype/ttinterp.c Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.3 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Security Assignee: fstrba(a)suse.com Reporter: kbabioch(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- There is an upstream commit to avoid NULL references in src/truetype/ttinterp.c References: https://git.savannah.gnu.org/cgit/freetype/freetype2.git/commit/src/truetyp… https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=5736 -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 1007777] New: windows:mingw:win32/mingw32-libqt5-qtwebkit: Bug
by bugzilla_noreply＠novell.com 23 May '20

23 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1007777 Bug ID: 1007777 Summary: windows:mingw:win32/mingw32-libqt5-qtwebkit: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: rafal.przemyslaw.malinowski(a)gmail.com Reporter: rafal.przemyslaw.malinowski(a)gmail.com QA Contact: opensuse-communityscreening(a)forge.provo.novell.com CC: fridrich.strba(a)bluewin.ch, fstrba(a)suse.com, hib(a)hiberis.nl, idonmez(a)suse.com, mkbosmans(a)gmail.com, tlillqvist(a)suse.com Found By: --- Blocker: --- Package does not build because of headers change. To fix apply: https://build.opensuse.org/package/view_file/home:rmalinowski:mingw32-qt5-k… -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1125105] New: weblate: package-translations lt : bad string
by bugzilla_noreply＠novell.com 22 May '20

22 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1125105 Bug ID: 1125105 Summary: weblate: package-translations lt : bad string Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Translations Assignee: ke(a)suse.com Reporter: ke(a)suse.com QA Contact: ke(a)suse.com Found By: --- Blocker: --- ATM, we cannot update package-translations because of a bad string: [ 180s] + msgfmt -o /home/abuild/rpmbuild/BUILDROOT/package-translations-84.87.20190208.4199a3f6-404.1.x86_64/usr/share/locale/en_US/LC_MESSAGES/package-translations-lt.mo - [ 180s] + msgcat --use-first lt/po/a.lt.po lt/po/aspell.lt.po lt/po/b.lt.po lt/po/c.lt.po lt/po/d.lt.po lt/po/e.lt.po lt/po/f.lt.po lt/po/g.lt.po lt/po/ghc.lt.po lt/po/gnome.lt.po lt/po/golang.lt.po lt/po/google.lt.po lt/po/gstreamer.lt.po lt/po/gtk.lt.po lt/po/h.lt.po lt/po/i.lt.po lt/po/j.lt.po lt/po/k.lt.po lt/po/kde.lt.po lt/po/l.lt.po lt/po/leechcraft.lt.po lt/po/lib.lt.po lt/po/libqt.lt.po lt/po/libreoffice.lt.po lt/po/m.lt.po lt/po/mate.lt.po lt/po/myspell.lt.po lt/po/n.lt.po lt/po/o.lt.po lt/po/p.lt.po lt/po/patterns.lt.po lt/po/perl.lt.po lt/po/php.lt.po lt/po/python.lt.po lt/po/q.lt.po lt/po/r.lt.po lt/po/rubygem.lt.po lt/po/s.lt.po lt/po/t.lt.po lt/po/tesseract.lt.po lt/po/texlive-specs.lt.po lt/po/texlive.lt.po lt/po/u.lt.po lt/po/v.lt.po lt/po/w.lt.po lt/po/wx.lt.po lt/po/x.lt.po lt/po/xfce4.lt.po lt/po/y.lt.po lt/po/yast2.lt.po lt/po/z.lt.po [ 187s] <stdin>:373: 'msgid' and 'msgstr' entries do not both end with '\n' [ 187s] msgfmt: found 1 fatal error [ 187s] error: Bad exit status from /var/tmp/rpm-tmp.DyWpVy (%install) -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1068348] New: X11:Wayland/libinput: Bug
by bugzilla_noreply＠novell.com 22 May '20

22 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1068348 Bug ID: 1068348 Summary: X11:Wayland/libinput: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: duwe(a)suse.com Reporter: mw-novell(a)wzff.de QA Contact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- Ever since I upgraded my system to libinput 1.9.x (tumbleweed), when I would put my laptop (HP Elitebook 8470p) into the docking station, both the internal and external keyboards wouldn't work until I undock the laptop again. Compiling 1.8.4 and downgrading to my own package fixed the issue. I therefore assume that libinput is actually the culprit. -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1129328] New: 15.1beta zypper dup from 416.2 (20190219) to 426.2 (20190311) trashed GPT
by bugzilla_noreply＠novell.com 22 May '20

22 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1129328 Bug ID: 1129328 Summary: 15.1beta zypper dup from 416.2 (20190219) to 426.2 (20190311) trashed GPT Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: mrmazda(a)earthlink.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 800158 --> http://bugzilla.opensuse.org/attachment.cgi?id=800158&action=edit .tgz of various data: GPT repair log, .bash_history tail, fstab, /boot/default/grub, grub.cfg, efibootmgr -v, parted -l, recent journal files, dmidecode, more The repair log contained in the attachment contains a visual record of sector 0 prior to successfully regenerating the partition table. Several sectors following looked similar. Original summary: 15.1beta zypper dup from 416.2 (20190219) to 426.2 (20190311) trashed GPT For the record, I'm filing this so that the cause might be determined, and fixed. I'm guessing intentionally not having the ESP partition mounted plays a significant part. Intentional recreation I'd be unlikely to attempt even if possible. I've never before had a partition table trashed by an upgrade. Fixing was easy only after considerable time was spent determining how to fix. Short form "creation" procedure and results: 1-zypper dup 15.1beta on sda9 from 416.2 to 426.2 2-reboot 3-select 15.1 stanza from default UEFI TW Grub custom.cfg on sda7 Actual behavior: 1-UEFI detours into setup 2-GPT sectors are mostly filled with something other than boot code 3-no 55 AA at end of sector 0 4-no protective table entry 5-nothing to boot from https://forums.opensuse.org/showthread.php/535286-15-1-dup-to-426-2-from-41… continues my problem description initialized at https://forums.opensuse.org/showthread.php/535180-Leap-15-1-Beta-Please-pos… Motherboard: https://www.asus.com/us/Motherboards/PRIME-B250M-C-CSM/ -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1085805] New: Add vulkan 32-bit package
by bugzilla_noreply＠novell.com 22 May '20

22 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1085805 Bug ID: 1085805 Summary: Add vulkan 32-bit package Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Minor Priority: P5 - None Component: Maintenance Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: zenitur(a)ya.ru QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Wine 3.3 now depends of vulkan. Please add vulkan-32bit package. -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1012272] New: Cannot open Flatpak Bundles with Gnome-Software
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1012272 Bug ID: 1012272 Summary: Cannot open Flatpak Bundles with Gnome-Software Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: Antoine.Saroufim(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Opening .flatpak bundles via gnome-software does absolutely nothing. Gnome-software doesn't even launch or start. Flatpak bundles are also not automatically detected as a type of file that can be opened with gnome-software. Currently using GNOME 3.22.2 on Tumbleweed (fully updated to the latest snapshot) -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1013324] New: Gnome-todo Does Not Show Google Tasks
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1013324 Bug ID: 1013324 Summary: Gnome-todo Does Not Show Google Tasks Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: Antoine.Saroufim(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- on openSUSE Tumbleweed with the latest snapshot, gnome-todo shows an empty list for the enabled gmail accounts while they should not be empty. Added tasks are not saved and do not appear on Google tasks either. -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1081014] New: [Build 20180213] GNUcash fails to start help in a p[asma/wayland session
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1081014 Bug ID: 1081014 Summary: [Build 20180213] GNUcash fails to start help in a p[asma/wayland session Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: https://openqa.opensuse.org/tests/609894/modules/gnuca sh/steps/47 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: dimstar(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- ## Observation openQA test in scenario opensuse-Tumbleweed-DVD-x86_64-kde-wayland@64bit_virtio fails in [gnucash](https://openqa.opensuse.org/tests/609894/modules/gnucash/steps/47) ## Reproducible Fails since (at least) Build [20170825](https://openqa.opensuse.org/tests/474925) ## Expected result Last good: (unknown) (or more recent) ## Further details Always latest result in this scenario: [latest](https://openqa.opensuse.org/tests/latest?version=Tumbleweed&arch=x8… This kind of issue seems to be unique to Plasma/Wayland - where the help does ot show up. Other test reliably show the help window. -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1131076] New: Gnome applications fail to start after zypper update and gets fixed by forcing gsettings-desktop-schemas
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1131076 Bug ID: 1131076 Summary: Gnome applications fail to start after zypper update and gets fixed by forcing gsettings-desktop-schemas Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: mail(a)aitorpazos.es QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:66.0) Gecko/20100101 Firefox/66.0 Build Identifier: This is an issue I've been seeing in my installation for some months now. It is one I don't have an explanation for but I do have a consistent workaround to fix it when it happens. Last time it happened, I spent the time on gathering logs and info that may help getting to the bottom of it. So this is what happens: - After some zypper updates, Firefox and any other apps that use Gnome libraries fail to start (I use KDE as my desktop environment). The reported error is: ``` (firefox:11159): GLib-GIO-ERROR **: 16:28:47.893: No GSettings schemas are installed on the system ExceptionHandler::GenerateDump cloned child 11168 ExceptionHandler::SendContinueSignalToChild sent continue signal to child ExceptionHandler::WaitForContinueSignal waiting for continue signal... (crashreporter:11170): GLib-GIO-ERROR **: 16:28:47.984: No GSettings schemas are installed on the system ``` - See the zypper log attached for that update - From experience on other instances of this error, I knew that reinstalling gsettings-desktop-schemas package will solve the issue and therefore, I took a look at the package to see if there was any difference between the contents of the package and the files in my filesystem. There were no differences and I couldn't see any script on the package that will trigger any system change other than replacing the files. - So I proceeded with the re-installation of gsettings-desktop-schemas package (`sudo zypper in --force gsettings-desktop-schemas`) - As expected, Firefox started working again - Checking at the filesystem changes on the `gsettings-desktop-schemas` reinstall using `snapper diff`, there were only rpm database related file changes: ``` Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Basenames and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Basenames differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Dirnames and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Dirnames differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Group and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Group differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Installtid and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Installtid differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Name and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Name differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Packages and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Packages differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Providename and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Providename differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Recommendname and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Recommendname differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Sha1header and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Sha1header differ Binary files /.snapshots/757/snapshot/usr/lib/sysimage/rpm/Sigmd5 and /.snapshots/758/snapshot/usr/lib/sysimage/rpm/Sigmd5 differ ``` Restarting the system doesn't fix it. Some googling suggests it may be related with the value of `XDG_DATA_DIRS`, but some other reports for other distros seem to suggest the same workaround (reinstalling gsettings-desktop-schemas): https://stackoverflow.com/questions/28953925/glib-gio-error-no-gsettings-sc… https://stackoverflow.com/questions/37510261/ubuntu-meld-no-gsettings-schem… https://forums.freebsd.org/threads/mate-not-starting-with-message-no-gsetti… My `XDG_DATA_DIRS` environment variable (no change between before and after the error): XDG_DATA_DIRS=/home/aitor/.local/share/flatpak/exports/share:/var/lib/flatpak/exports/share:/usr/local/share:/usr/share Any advice would be greatly appreciated. Reproducible: Sometimes Steps to Reproduce: 1. Perform a packages upgrade (`zypper up` or `zypper dup`) Actual Results: Sometimes, after the update, Firefox and other applications using Gnome libraries fail to start: ``` (firefox:11159): GLib-GIO-ERROR **: 16:28:47.893: No GSettings schemas are installed on the system ExceptionHandler::GenerateDump cloned child 11168 ExceptionHandler::SendContinueSignalToChild sent continue signal to child ExceptionHandler::WaitForContinueSignal waiting for continue signal... (crashreporter:11170): GLib-GIO-ERROR **: 16:28:47.984: No GSettings schemas are installed on the system ``` Expected Results: Start Firefox or any other Gnome app as usual Forcing the reinstall of `gsettings-desktop-schemas` package fixes the issue: (`sudo zypper in --force gsettings-desktop-schemas`) -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1128190] New: GNOME 3.32.0 in Tumbleweed - Brewing in GNOME:Next
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1128190 Bug ID: 1128190 Summary: GNOME 3.32.0 in Tumbleweed - Brewing in GNOME:Next Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: bjorn.lie(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- This is a meta bug for stuff that needs to be done/fixed before we can push GNOME 3.32.x into Tumbleweed. -- You are receiving this mail because: You are on the CC list for the bug.

2 26

[Bug 1128589] New: GDM - patches and build needs major rework and bumping to 3.32.x
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1128589 Bug ID: 1128589 Summary: GDM - patches and build needs major rework and bumping to 3.32.x Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: bjorn.lie(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The patches and the way we build gdm needs major rework. In reality we need to look into how we build gdm, and if we can move away from depending on xdm, since we now use the update-alternatives magic for selecting what login manager to use. Depending on xdm for a few folders and files are insane! HELP WANTED!! -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 1121963] New: [Build 20190112] openQA test fails in NM_wpa2_enterprise
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1121963 Bug ID: 1121963 Summary: [Build 20190112] openQA test fails in NM_wpa2_enterprise Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: https://openqa.opensuse.org/tests/831502/modules/NM_wp a2_enterprise/steps/19 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: dimstar(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- ## Observation openQA test in scenario opensuse-Tumbleweed-DVD-x86_64-extra_tests_on_gnome@64bit fails in [NM_wpa2_enterprise](https://openqa.opensuse.org/tests/831502/modules/NM_wpa… ## Reproducible Fails since (at least) Build [20181224](https://openqa.opensuse.org/tests/821120) ## Expected result Last good: [20181219](https://openqa.opensuse.org/tests/819007) (or more recent) ## Further details Always latest result in this scenario: [latest](https://openqa.opensuse.org/tests/latest?version=Tumbleweed&test=ex… At that step, openQA would switch back to the X-Session, but somehow we end up on gdm (and the test does not anticipate that) since there seems not to be a QA related change, I file it as a product bug (this issue started after the major yast stack update) -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1109687] New: gnome-news differs between architectures
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1109687 Bug ID: 1109687 Summary: gnome-news differs between architectures Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: openSUSE Factory Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: bwiedemann(a)suse.com QA Contact: qa-bugs(a)suse.de CC: os.gnome.maintainers(a)gmail.com Blocks: 1109534 Found By: Development Blocker: --- see bug 1109534 for background /usr/bin/gnome-news differs (Python script, ASCII text executable) --- old//usr/bin/gnome-news 2018-03-11 01:10:54.000000000 +0000 +++ new//usr/bin/gnome-news 2018-03-10 17:48:18.000000000 +0000 @@ -7,7 +7,7 @@ import gettext # Make sure we'll find the pygobject module, even in JHBuild -sys.path.insert(1, "/usr/lib64/python3.6/site-packages") +sys.path.insert(1, "/usr/lib/python3.6/site-packages") # Make sure we'll find the gnomenews module, even in JHBuild sys.path.insert(1, "/usr/lib/python3.6/site-packages") Might be easiest to always include both lib and lib64 independent of build architecture. -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1104904] New: [Build 6.36] openQA test fails in finish_desktop
by bugzilla_noreply＠novell.com 20 May '20

20 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1104904 Bug ID: 1104904 Summary: [Build 6.36] openQA test fails in finish_desktop Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: https://openqa.opensuse.org/tests/726678/modules/finis h_desktop/steps/12 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: dimstar(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- ## Observation openQA test in scenario opensuse-3.29.90.1-Gnome-Live-x86_64-gnome-live@uefi-usb fails in [finish_desktop](https://openqa.opensuse.org/tests/726678/modules/finish_des… ## Reproducible Fails since (at least) Build [6.20](https://openqa.opensuse.org/tests/721301) ## Expected result Last good: (unknown) (or more recent) ## Further details Always latest result in this scenario: [latest](https://openqa.opensuse.org/tests/latest?machine=uefi-usb&arch=x86_… First debug sessions show that gnome-shell segfaults in glib2; glib2 was recently updated and migrated to meson as build system. -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1048934] New: Enable STAudio ADCIII device in ice1712
by bugzilla_noreply＠novell.com 18 May '20

18 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1048934 Bug ID: 1048934 Summary: Enable STAudio ADCIII device in ice1712 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: sbahling(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 732588 --> http://bugzilla.suse.com/attachment.cgi?id=732588&action=edit Patch against latest openSUSE Leap 42.2 kernel I have a rare but very nice 8 channel ADC unit that uses the hoontech ice1712 driver. For years I have carried around a special patch that makes this unit work properly. First it appears that the MUTE flag must be set in order to unmute the channels. Second, I enable all box configs. From what I recall these settings are hard coded, so no option other than patching the code. During the days when the alsa-driver-kmp was maintained, it was not too difficult for me to simply link and patch that, but now I need to patch the in kernel driver which is more of a pain. I'm guessing that maintaining my own KMP will also be a pain in the long run. Would be nice to find a way to make these parts runtime configurable or at least via module configuration. -- You are receiving this mail because: You are on the CC list for the bug.

2 26

[Bug 1132439] New: [transactional server] does not scale in VirtualBox
by bugzilla_noreply＠novell.com 18 May '20

18 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1132439 Bug ID: 1132439 Summary: [transactional server] does not scale in VirtualBox Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: axel.braun(a)gmx.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Using a fully patched Leap 15.0 as host (Virtualbox 5.2.22), I have installed Leap 15.1 Build 449.2 with transactional server and KDE desktop. virtualbox-guest-kmp-default virtualbox-guest-X11 virtualbox-guest-tools are installed on the client. When enlarging the Vbox window, the resolution of the client remains at 640x480. Expected behaviour: client scales up to a larger resolution -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 1123347] New: I get error about missing files when I print.
by bugzilla_noreply＠novell.com 18 May '20

18 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1123347 Bug ID: 1123347 Summary: I get error about missing files when I print. Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Printing Assignee: jsmeix(a)suse.com Reporter: carlos.e.r(a)opensuse.org QA Contact: jsmeix(a)suse.com Found By: --- Blocker: --- I get these errors in the cups log, and a popup error when I print: E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/sRGB_A.icc\" not available: No such file or directory E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/CMYK_A.icc\" not available: No such file or directory E [18/Jan/2019:10:08:31 +0100] cp1510n_ps: File \"/Library/Printers/hp/Profiles/Gray_A.icc\" not available: No such file or directory It is not the first time I see that error, but I do not remember what package should contain them, and google doesn't find them. However, printing works. Notice that it is not only errors in the log, but that several popup messages appear on the desktop and I have to click on each of them. I installed "icc-profiles-all", which also brought in "icc-profiles-basiccolor-printing2009-extra" and "icc-profiles-oyranos-extra". The complete list of installed icc profiles is: cer@Telcontar:~> rpm -qa | grep -i icc-profiles icc-profiles-oyranos-extra-1.2-lp150.1.6.noarch icc-profiles-basiccolor-printing2009-coat2-1.2.0-lp150.1.6.noarch icc-profiles-all-1.2-lp150.1.6.noarch icc-profiles-basiccolor-printing2009-extra-1.2.0-lp150.1.6.noarch icc-profiles-lcms-lab-1.2-lp150.1.6.noarch icc-profiles-basiccolor-lstarrgb-1.2-lp150.1.6.noarch icc-profiles-openicc-rgb-1.3-lp150.1.6.noarch icc-profiles-1.2-lp150.1.6.noarch icc-profiles-mini-1.2-lp150.1.6.noarch cer@Telcontar:~> I can not find any other icc-profile package in YaST. Still, no hp profiles: cer@Telcontar:~> locate sRGB_A.icc cer@Telcontar:~> cer@Telcontar:~> locate Library/Printers/hp/Profiles cer@Telcontar:~> cer@Telcontar:~> locate /Library/Printers/ cer@Telcontar:~> Googling for "CMYK_A.icc opensuse" I find one entry: +++........... openSUSE ICC Profile Taxi icc.opensuse.org/ AOCASEM S.p.A.AU OptronicsAcerAcer TechnologiesAculabAculab LtdAdvanced Micro DevicesAncor CommunicationsAncor Communications IncAppleApple ... ...........++- but it gives error: "503 Sorry, the page you are looking for is currently down for maintenance." I also find <https://software.opensuse.org/package/icc-profiles-openicc-rgb> +++........... icc-profiles-openicc-rgb Default sRGB ICC profile + The "WWW standard" sRGB colorimetry in a ICC profile and others. There is no official package available for ALL Distributions ...........++- seems to be repo "multimedia:color_management" marked as experimental. But in fact, I already have official package "icc-profiles-openicc-rgb-1.3-lp150.1.6.noarch" installed - how come the search page says there is no official package and points to an experimental package instead? Anyway, I update that package to find out [...] Nope, the package file list does not contain any "sRGB_A.icc" file. It has "/usr/share/color/icc/OpenICC/sRGB.icc". Reverting update and repo add. -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 1101421] New: snd_hda_intel throws errors and audio stops working over hdmi
by bugzilla_noreply＠novell.com 18 May '20

18 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1101421 Bug ID: 1101421 Summary: snd_hda_intel throws errors and audio stops working over hdmi Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: tchvatal(a)suse.com QA Contact: qa-bugs(a)suse.de CC: tiwai(a)suse.com Found By: --- Blocker: --- Note this is happening after few days/weeks of usage the audio over hdmi stops working. Linux htpc 4.12.14-lp150.12.4-default #1 SMP Tue May 22 05:17:22 UTC 2018 (66b2eda) x86_64 x86_64 x86_64 GNU/Linux I dmesg I see: [2124547.875895] snd_hda_intel 0000:00:0e.0: azx_get_response timeout, switching to polling mode: last cmd=0x20bf8100 [2124548.887888] snd_hda_intel 0000:00:0e.0: No response from codec, disabling MSI: last cmd=0x20bf8100 [2124549.895862] snd_hda_intel 0000:00:0e.0: azx_get_response timeout, switching to single_cmd mode: last cmd=0x20bf8100 [2124549.915540] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5 [2124550.368178] snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x1f0e00. -5 [2124550.368327] snd_hda_codec_realtek hdaudioC0D0: Unable to sync register 0x1f0e00. -5 [2124557.420043] azx_single_send_cmd: 1003 callbacks suppressed [2124581.540214] azx_single_send_cmd: 72 callbacks suppressed [2124648.182974] azx_single_wait_for_response: 277 callbacks suppressed [2124648.203464] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5 [2124654.412583] azx_single_send_cmd: 433 callbacks suppressed Is there any way I could debug or trigger this more reliably or anything I could try to tweak to avoid this? -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 1120356] New: Kernel crash when trying to authenticate to wifi using iwlwifi
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1120356 Bug ID: 1120356 Summary: Kernel crash when trying to authenticate to wifi using iwlwifi Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: asn(a)cryptomilk.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Linux robo 4.12.14-lp151.19-default #1 SMP Fri Dec 7 17:58:04 UTC 2018 (f15fa4c) x86_64 x86_64 x86_64 GNU/Linux [ 115.688965] Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012 [ 115.688973] Workqueue: events_freezable ieee80211_restart_work [mac80211] [ 115.688974] task: ffff880118f40040 task.stack: ffffc900007a8000 [ 115.688982] RIP: 0010:drv_stop+0xdc/0xf0 [mac80211] [ 115.688982] RSP: 0018:ffffc900007abce0 EFLAGS: 00010246 [ 115.688983] RAX: ffff880118f40040 RBX: ffff88011643e8c0 RCX: 0000000000000000 [ 115.688984] RDX: ffff880118f40040 RSI: 0000000000000286 RDI: ffff88010b7d0780 [ 115.688985] RBP: ffff88010b7d1018 R08: 0000000000000000 R09: 0000000000000000 [ 115.688985] R10: ffffc900007abce8 R11: 0000000000000040 R12: 0000000000000000 [ 115.688986] R13: ffff88010b7d0780 R14: ffff88011643f3b0 R15: ffff88010b7d0f10 [ 115.688987] FS: 0000000000000000(0000) GS:ffff88011e200000(0000) knlGS:0000000000000000 [ 115.688988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 115.688988] CR2: 00007fb6da489e80 CR3: 000000000200a003 CR4: 00000000001606f0 [ 115.688989] Call Trace: [ 115.688998] ieee80211_do_stop+0x4db/0x820 [mac80211] [ 115.689000] ? dev_deactivate_many+0x233/0x280 [ 115.689009] ieee80211_stop+0x16/0x20 [mac80211] [ 115.689011] __dev_close_many+0x8c/0xe0 [ 115.689012] dev_close_many+0x78/0x110 [ 115.689013] dev_close.part.97+0x34/0x50 [ 115.689015] dev_close+0x13/0x20 [ 115.689023] cfg80211_shutdown_all_interfaces+0x6d/0xb0 [cfg80211] [ 115.689033] ieee80211_reconfig+0x222/0xf80 [mac80211] [ 115.689035] ? try_to_del_timer_sync+0x3d/0x50 [ 115.689042] ieee80211_restart_work+0xb2/0xe0 [mac80211] [ 115.689044] process_one_work+0x1da/0x400 [ 115.689046] worker_thread+0x2b/0x3f0 [ 115.689047] ? process_one_work+0x400/0x400 [ 115.689048] kthread+0x113/0x130 [ 115.689049] ? kthread_create_worker_on_cpu+0x50/0x50 [ 115.689051] ret_from_fork+0x35/0x40 [ 115.689052] Code: c3 20 0b 00 48 85 ed 74 1d 48 8b 45 00 48 8b 7d 08 48 83 c5 18 48 89 de e8 c2 f9 f7 e0 48 8b 45 00 48 85 c0 75 e7 e9 58 ff ff ff <0f> 0b 5b 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f [ 115.689072] ---[ end trace 01a9308b451a3960 ]--- -- You are receiving this mail because: You are on the CC list for the bug.

2 15

[Bug 1133876] New: Processes, starteted by autostart (Xfce , KDE ) are after logout still running
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1133876 Bug ID: 1133876 Summary: Processes, starteted by autostart (Xfce , KDE ) are after logout still running Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Xfce Assignee: bnc-team-xfce(a)forge.provo.novell.com Reporter: guenter.halt(a)halt-hoenow.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Programms (binaries or scripts) will be not killed during logout, if the realated programms was started from an "forEver-script" Autostart-file in XFCE: ~/.config/autostart/autorun.xxx.desktop [Desktop Entry] Comment[de_DE]= Comment= Exec=/home/<user>/forEver.sh GenericName[de_DE]= GenericName= Icon=system-run MimeType= Name[de_DE]= Name= Path= StartupNotify=true Terminal=false TerminalOptions= Type=Application X-DBUS-ServiceName= X-DBUS-StartupType= X-KDE-SubstituteUID=false X-KDE-Username= #### File forEver.sh : #!/bin/bash while true do <executable binary or script> done ########## After logout from XFCE this <executable binary or script> is still running. For test: i used xclock as <executable binary or script> -- You are receiving this mail because: You are on the CC list for the bug.

2 13

[Bug 1069846] New: Headphone not functional in most cases
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1069846 Bug ID: 1069846 Summary: Headphone not functional in most cases Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.3 Hardware: x86-64 OS: openSUSE 42.3 Status: NEW Severity: Normal Priority: P5 - None Component: Sound Assignee: tiwai(a)suse.com Reporter: werner(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 750107 --> http://bugzilla.opensuse.org/attachment.cgi?id=750107&action=edit /tmp/alsa-info.txt.BmuD2Vdhex without headphone plugged currently I be at a loss with my headphone used on my laptop Tuxedo N15-17RD which has a Realtek ALC269VC combined with some Intel soundhardware like Skylake HDMI. I'm using hdajackretask and then it has wokrd short after reboot but now after suspend mode nothing does work. With alsamixer as well as other mixers from e.g. lspanle I see muting speakers on plugin the headhone's jack and unmute the headphone but I do not hear anything. the difference between two alss-info output with unplugged and plugged headphone jack looks like this: --- /tmp/alsa-info.txt.BmuD2Vdhex 2017-11-26 18:50:40.320766509 +0100 +++ /tmp/alsa-info.txt.bgoL8yWkjc 2017-11-26 18:51:34.509991307 +0100 @@ -3,7 +3,7 @@ upload=true&script=true&cardinfo= !!ALSA Information Script v 0.4.64 !!################################ -!!Script ran on: Sun Nov 26 17:50:39 UTC 2017 +!!Script ran on: Sun Nov 26 17:51:33 UTC 2017 !!Linux Distribution @@ -166,7 +166,7 @@ Node 0x02 [Audio Output] wcaps 0x41d: St ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC269VC Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 - Amp-Out vals: [0x00 0x00] + Amp-Out vals: [0x53 0x53] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 @@ -178,7 +178,7 @@ Node 0x03 [Audio Output] wcaps 0x41d: St Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 - Amp-Out vals: [0x57 0x57] + Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 @@ -287,14 +287,14 @@ Node 0x14 [Pin Complex] wcaps 0x40058d: Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-Out vals: [0x00 0x00] + Amp-Out vals: [0x80 0x80] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x40: OUT + Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D3, actual=D3 @@ -304,7 +304,7 @@ Node 0x15 [Pin Complex] wcaps 0x40058d: Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-Out vals: [0x80 0x80] + Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x02211020: [Jack] HP Out at Ext Front @@ -618,21 +618,21 @@ Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 87 - Mono: Playback 87 [100%] [0.00dB] [on] + Mono: Playback 83 [95%] [-3.00dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: - Front Left: Playback 0 [0%] [-65.25dB] [off] - Front Right: Playback 0 [0%] [-65.25dB] [off] + Front Left: Playback 87 [100%] [0.00dB] [on] + Front Right: Playback 87 [100%] [0.00dB] [on] Simple mixer control 'Speaker',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: - Front Left: Playback 87 [100%] [0.00dB] [on] - Front Right: Playback 87 [100%] [0.00dB] [on] + Front Left: Playback 0 [0%] [-65.25dB] [off] + Front Right: Playback 0 [0%] [-65.25dB] [off] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right @@ -714,8 +714,8 @@ state.PCH { control.1 { iface MIXER name 'Headphone Playback Volume' - value.0 0 - value.1 0 + value.0 87 + value.1 87 comment { access 'read write' type INTEGER @@ -723,15 +723,15 @@ state.PCH { range '0 - 87' dbmin -6525 dbmax 0 - dbvalue.0 -6525 - dbvalue.1 -6525 + dbvalue.0 0 + dbvalue.1 0 } } control.2 { iface MIXER name 'Headphone Playback Switch' - value.0 false - value.1 false + value.0 true + value.1 true comment { access 'read write' type BOOLEAN @@ -741,8 +741,8 @@ state.PCH { control.3 { iface MIXER name 'Speaker Playback Volume' - value.0 87 - value.1 87 + value.0 0 + value.1 0 comment { access 'read write' type INTEGER @@ -750,15 +750,15 @@ state.PCH { range '0 - 87' dbmin -6525 dbmax 0 - dbvalue.0 0 - dbvalue.1 0 + dbvalue.0 -6525 + dbvalue.1 -6525 } } control.4 { iface MIXER name 'Speaker Playback Switch' - value.0 true - value.1 true + value.0 false + value.1 false comment { access 'read write' type BOOLEAN @@ -932,7 +932,7 @@ state.PCH { control.18 { iface MIXER name 'Master Playback Volume' - value 87 + value 83 comment { access 'read write' type INTEGER @@ -940,7 +940,7 @@ state.PCH { range '0 - 87' dbmin -6525 dbmax 0 - dbvalue.0 0 + dbvalue.0 -300 } } control.19 { @@ -976,7 +976,7 @@ state.PCH { control.22 { iface CARD name 'Headphone Jack' - value false + value true comment { access read type BOOLEAN -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 1111351] New: At shutdown the cups service is waiting for remote printer services without network
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1111351 Bug ID: 1111351 Summary: At shutdown the cups service is waiting for remote printer services without network Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: All OS: openSUSE Factory Status: NEW Severity: Major Priority: P5 - None Component: Printing Assignee: jsmeix(a)suse.com Reporter: werner(a)suse.com QA Contact: jsmeix(a)suse.com Found By: --- Blocker: --- The cups.service unit file is missing dependency on network.target like After=network.target to allow the cups.service is stop *before* network goes down. This simply would avoid waiting on remote printer services. -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 980866] New: update-scripts leave ton of leftovers
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.suse.com/show_bug.cgi?id=980866 Bug ID: 980866 Summary: update-scripts leave ton of leftovers Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: libzypp Assignee: zypp-maintainers(a)forge.provo.novell.com Reporter: tchvatal(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- While we now have leftover mechanism to run scripts on posttrans of packages just once instead of for all invocations we keep the scripts that were not executed in /var/adm/update-scripts/ Most visible it is on update scripts for font scriptlets. One of the leftovers: dreamcrawler:/var/adm/update-scripts # cat ghostscript-fonts-9.06-7.4-reconfigure-fonts if [ -e /var/run/fontpackages/reconfigure-fonts ]; then if [ -x /usr/sbin/fonts-config ]; then /usr/sbin/fonts-config --quiet fi rm /var/run/fontpackages/reconfigure-fonts fi rm /var/adm/update-scripts/ghostscript-fonts-9.06-7.4-reconfigure-fonts I suppose proper solution would be to run just one of the scripts, but then delete them all and not keep any? -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 1107798] New: Fails to update python3-appdirs from Leap 15 to Tumbleweed
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1107798 Bug ID: 1107798 Summary: Fails to update python3-appdirs from Leap 15 to Tumbleweed Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: mlin(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- With the last change in python-appdirs https://build.opensuse.org/request/show/633233 , upgrade to current Tumbleweed from Leap 15.0 fails to work due to python3-appdirs install failed. 2018-09-08 10:11:00 <5> install(3439) [zypp] Exception.cc(log):166 RpmDb.cc(doInstallPackage):2093 THROW: Subprocess failed. Error: RPM failed: error: unpacking of archive failed on file /usr/lib/python3.6/site-packages/appdirs-1.4.3-py3.6.egg-info: cpio: File from package already exists as a directory in system 2018-09-08 10:11:00 <5> install(3439) [zypp] Exception.cc(log):166 error: python3-appdirs-1.4.3-2.1.noarch: install failed 2018-09-08 10:11:00 <5> install(3439) [zypp] Exception.cc(log):166 error: python3-appdirs-1.4.3-lp150.1.6.noarch: erase skipped 2018-09-08 10:11:00 <5> install(3439) [zypp] Exception.cc(log):166 2018-09-08 10:11:01 <0> install(3439) [Pkg] Callbacks.YCP.cc(evaluate):240 Evaluating callback (registered funciton: ruby_reference) 2018-09-08 10:11:01 <0> install(3439) [Ruby] binary/Yast.cc(ycp_module_call_ycp_function):282 Dynamic Proxy: [UI::WidgetExists] with [5] params 2018-09-08 10:11:01 <0> install(3439) [Ruby] binary/Yast.cc(ycp_module_call_ycp_function):291 Namespace created from UI 2018-09-08 10:11:01 <0> install(3439) [ui] YUINamespace.cc(createFunctionCall):1035 overloaded WidgetExists, 2@46 2018-09-08 10:11:01 <0> install(3439) [Ruby] binary/Yast.cc(ycp_module_call_ycp_function):326 Call WidgetExists 2018-09-08 10:11:01 <0> install(3439) [Ruby] binary/Yast.cc(ycp_module_call_ycp_function):332 Append parameter `progressCurrentPackage 2018-09-08 10:11:01 <0> install(3439) [ui] YUINamespace.cc(finishParameters):915 Actual type: <unspec> (symbol) 2018-09-08 10:11:01 <0> install(3439) [ui] YUINamespace.cc(finishParameters):932 Candidate: boolean WidgetExists (symbol) MATCH: 0 2018-09-08 10:11:01 <1> install(3439) [Ruby] modules/PackageCallbacks.rb:455 DonePackage(error: 3, reason: 'Subprocess failed. Error: RPM failed: error: unpacking of archive failed on file /usr/lib/python3.6/site-packages/appdirs-1.4.3-py3.6.egg-info: cpio: File from package already exists as a directory in system error: python3-appdirs-1.4.3-2.1.noarch: install failed error: python3-appdirs-1.4.3-lp150.1.6.noarch: erase skipped ') -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 1094769] New: NVIDIA - Unknown header type 7f
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1094769 Bug ID: 1094769 Summary: NVIDIA - Unknown header type 7f Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: 64bit OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: denis.polom(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Nvidia drivers installed from repo 'http://download.nvidia.com/opensuse/leap/15.0/' Then I followed bumblebee installation steps described in 'https://en.opensuse.org/SDB:NVIDIA_Bumblebee' Then while listing PCI devices, I'm getting this for NVIDIA: --- 01:00.0 3D controller: NVIDIA Corporation GM107GLM [Quadro M1000M] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel modules: nouveau, nvidia_drm, nvidia --- It wasn't issue for Leap 42.3 -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 1136530] New: LibreOffice version
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1136530 Bug ID: 1136530 Summary: LibreOffice version Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: LibreOffice Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: martin.kofahl(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Leap 42.3 contains LibreOffice 6.1.5.2 but the following release Leap 15 contains LibreOffice 6.1.3.2, which is 6 months older. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1102602] New: exo-preferred-applications does not update mime/x-scheme-handler (Leap 15)
by bugzilla_noreply＠novell.com 15 May '20

15 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1102602 Bug ID: 1102602 Summary: exo-preferred-applications does not update mime/x-scheme-handler (Leap 15) Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Xfce Assignee: bnc-team-xfce(a)forge.provo.novell.com Reporter: sschricker(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Leap 15 - exo-preferred-applications: If one wants to change the default Web browser to e.g. Chromium, using the bundled "Preferred Application" App (exo-preferred-applications), it doesn't update `x-scheme-handler/http` and `x-scheme-handler/https`, which leads into odd behavior like xfce4-terminal opening links in the wrong browser via Ctrl-LeftClick. This can be fixed with: $ xdg-mime default chromium-browser.desktop x-scheme-handler/https $ xdg-mime default chromium-browser.desktop x-scheme-handler/http --- $ rpm -qf /usr/bin/exo-preferred-applications exo-tools-0.12.0-lp150.1.6.x86_64 -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1069441] New: [Build 20171121] rails test fails: Could not find gem capybara
by bugzilla_noreply＠novell.com 14 May '20

14 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1069441 Bug ID: 1069441 Summary: [Build 20171121] rails test fails: Could not find gem capybara Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: http://openqa.opensuse.org/tests/538546/modules/rails/ steps/12 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Ruby Assignee: ruby-devel(a)suse.de Reporter: dimstar(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- ## Observation openQA test in scenario opensuse-Tumbleweed-DVD-x86_64-extra_tests_in_textmode@64bit fails in [rails](http://openqa.opensuse.org/tests/538546/modules/rails/steps/12) ## Reproducible Fails since (at least) Build [20170905](http://openqa.opensuse.org/tests/479254) ## Expected result Last good: [20170904](http://openqa.opensuse.org/tests/478535) (or more recent) ## Further details Always latest result in this scenario: [latest](http://openqa.opensuse.org/tests/latest?test=extra_tests_in_textmod… -- You are receiving this mail because: You are on the CC list for the bug.

2 14

[Bug 954505] New: yast ruby msg extractor (xgettext) does not support format marker
by bugzilla_noreply＠novell.com 06 May '20

06 May '20

http://bugzilla.suse.com/show_bug.cgi?id=954505 Bug ID: 954505 Summary: yast ruby msg extractor (xgettext) does not support format marker Classification: openSUSE Product: openSUSE Tumbleweed Version: 2015* Hardware: x86-64 OS: openSUSE 42.1 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: ke(a)suse.com QA Contact: jsrain(a)suse.com CC: 5yrnyk(a)myway.com, ancor(a)suse.com, dimstar(a)opensuse.org, ke(a)suse.com Depends on: 954357 Found By: --- Blocker: --- +++ This bug was initially created as a clone of Bug #954357 +++ When installing Leap 42.1 (or 13.2) with Ukrainian localization the page of user account setup is skipped with error: Details: malformed format string - %*[0-9] Caller: /usr/lib64/ruby/gems/2.1.0/gems/fast_gettext-0.9.2/lib/fast_gettext/vendor/string.rb:70:in `%' Other tried localizations show user account page correctly. y2logs is attached ============================================================================= Karl Eichwalder 2015-11-10 17:36:40 CET (In reply to Ancor Gonzalez Sosa from comment #5) > Silly me! I was looking at Estonian .po file (et) and checking the effect in > Greek language (el). But turns out el!=et. :-) > > In Estonian it's not broken just because the translation is marked as fuzzy > (so not included in the .mo file)... a missing translation that is not that > obvious when you are staring at a Greek screen and you see no English text. > :-D > > So, in the end, it's a bug in the uk/users.po, as expected from the very > beginning. So reassigning to translations. Ok, thanks for debugging. It would work better, if the ruby xgettext extractor would add formatting markers as it does for other languages such as c or even ycp: #, c-format #, ycp-format I'm not sure whether that's a general issue or whether our yast xgettext extractor just does not know about this. Without such markers we are not (easily) able to validate the translations -- we usually do this with msgfmt. -- You are receiving this mail because: You are on the CC list for the bug.

1 21

[Bug 1026156] New: Weblate doesn't check for wrong "%s" variable
by bugzilla_noreply＠novell.com 06 May '20

06 May '20

http://bugzilla.suse.com/show_bug.cgi?id=1026156 Bug ID: 1026156 Summary: Weblate doesn't check for wrong "%s" variable Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Translations Assignee: ke(a)suse.com Reporter: elchevive68(a)gmail.com QA Contact: ke(a)suse.com Found By: --- Blocker: --- Hi, Maybe Weblate should check for wrong translations on variable %s, because if it is translated wrong (%1, %d, etc) it can break the program like this bug for example: https://bugzilla.suse.com/show_bug.cgi?id=1018576 Regards -- You are receiving this mail because: You are on the CC list for the bug.

1 10

[Bug 1074128] New: Unable to compile Latex in Tumbleweed 'kpathsea running mktexfmt pdflatex.fmt'
by bugzilla_noreply＠novell.com 06 May '20

06 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1074128 Bug ID: 1074128 Summary: Unable to compile Latex in Tumbleweed 'kpathsea running mktexfmt pdflatex.fmt' Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Factory Status: NEW Severity: Major Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: dwoelki(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/63.0.3239.108 Safari/537.36 Build Identifier: mktexfmt [ERROR]: -user mode but path setup is -sys type, bailing out this happens at every compilation attempt with several different programs and even manual compilation with lualatex texlive scheme base and full and manual texlie have been tested Reproducible: Always Steps to Reproduce: 1.install texlive scheme full https://software.opensuse.org/package/texlive-scheme-full 2. zypper in texstudio select lualatex 3. try to compile anything in texstudio Actual Results: mktexfmt [ERROR]: -user mode but path setup is -sys type, bailing out Expected Results: working latex compilation -- You are receiving this mail because: You are on the CC list for the bug.

1 13

[Bug 1029967] New: bash has binaries in /bin
by bugzilla_noreply＠novell.com 06 May '20

06 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1029967 Bug ID: 1029967 Summary: bash has binaries in /bin Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: daniel.molkentin(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- bash is one of the remaining packages in Tumbleweed to install binaries to /bin. Please make sure all binaries previously in /usr go to %_bindir (aka /usr/bin), and /bin contains a symlink to those. See https://bugzilla.opensuse.org/show_bug.cgi?id=1029961 for an overview. If you need assistance, don't hesitate to ask. General discussions should happen in the meta bug (see previous link). -- You are receiving this mail because: You are on the CC list for the bug.

1 28

[Bug 1094731] New: Latexmk shows a Perl version related warning
by bugzilla_noreply＠novell.com 06 May '20

06 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1094731 Bug ID: 1094731 Summary: Latexmk shows a Perl version related warning Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: kacper.pluta(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The current version of Latexmk shows a warning massage related to up coming changes in the Perl API. "latexmk -CA article Latexmk: This is Latexmk, John Collins, 19 Jan. 2017, version: 4.52c. File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at /usr/bin/latexmk line 3253. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 1104531] New: /etc/profile.d/bash_completion.sh syntax error in ksh
by bugzilla_noreply＠novell.com 06 May '20

06 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1104531 Bug ID: 1104531 Summary: /etc/profile.d/bash_completion.sh syntax error in ksh Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: ecmartinson(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When connecting to a LEAP 15 system as a user with ksh login shell, the /etc/profile.d/bash_completion.sh file reports a syntax error: ksh: /etc/profile.d/bash_completion.sh[2]: syntax error: unexpected operator/operand '=~' When comparing this file to the same file on LEAP 42.3, there are some simple syntax changes that aren't compatible with ksh. I updated my copy of the script to match the 42.3 release and the problem is gone. That is the only difference. -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 1118557] New: xdvi: cannot display dvi ("Missing charsets in String to FontSet conversion" / "Unable to load any usable fontset")
by bugzilla_noreply＠novell.com 06 May '20

06 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=1118557 Bug ID: 1118557 Summary: xdvi: cannot display dvi ("Missing charsets in String to FontSet conversion" / "Unable to load any usable fontset") Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: X11 Applications Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: Ulrich.Windl(a)rz.uni-regensburg.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Running LaTeX in GNU Emacs, I could create a DVI file, but I could not display it, because xdvi aborts. The system was upgraded from Leap 42.3, where those programs worked without a problem. Messages from xdvi are: Warning: Missing charsets in String to FontSet conversion Warning: Unable to load any usable fontset Error: Aborting: no fontset found I have 2145 texlive packages installed, I guess that should be enough to display a DVI file. When I use pdflatex on the same file, I get a PDF file that displays without problems, and the document contains CM (Computer Modern) fonts only. -- You are receiving this mail because: You are on the CC list for the bug.

1 15

[Bug 983878] New: "Create New (libreoffice file)" right mouse button menu item missing
by bugzilla_noreply＠novell.com 04 May '20

04 May '20

http://bugzilla.opensuse.org/show_bug.cgi?id=983878 Bug ID: 983878 Summary: "Create New (libreoffice file)" right mouse button menu item missing Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.1 Hardware: All OS: openSUSE 42.1 Status: NEW Severity: Minor Priority: P5 - None Component: KDE Workspace (Plasma) Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: michaelof(a)rocketmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:46.0) Gecko/20100101 Firefox/46.0 Build Identifier: On my OpenSuse Leap 42.1 box, migrated from 13.1, there are no "Create New LibreOffice Writer/Calc/Impress/..." right mouse button menu items in KDE's Dolphin. Verified in IRC channel #KDE that these menu items are installed as default e.g. in kubuntu, relevant kubuntu package is "libreoffice-kde". Found also that there is an "unstable" package for OpenSuse available: https://software.opensuse.org/package/dolphin-libreoffice-templates I've analyzed the content of this package and read this forum thread https://forums.opensuse.org/showthread.php/517427-Dolphin-How-to-use-the-Te…, so I was able to create my own local KDE/Dolphin "templates". My question is: These "New LibreOffice file..." links are just 2 files (.desktop and source), plus localization, so why aren't they contained in the standard OpenSuse Distribution also? Unfortunately I'm only able to localize them for English and German, so can't contribute in general for all :-) Reproducible: Always Steps to Reproduce: 1. Open (KDE's) Dolphin 2. Navigate to any directory you have write access to 3. Right Mouse Button click on any folder or "white space" (NOT a file) Actual Results: No "create new..." menu items for LibreOffice doc types Expected Results: Menu items for LibreOffice doc types -- You are receiving this mail because: You are on the CC list for the bug.

1 3