February 2019 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1106673] LUKS keyboard layout falls back to US instead of DE since last dracut update
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.suse.com/show_bug.cgi?id=1106673 http://bugzilla.suse.com/show_bug.cgi?id=1106673#c19 --- Comment #19 from Thomas Blume <thomas.blume(a)suse.com> --- (In reply to Aender Boy from comment #17) > (In reply to Aender Boy from comment #12) > > removing `none` from `FONT_MAP=` in /etc/vconsole.conf and messing around > > with dracut and mkinitrd afterwards removed the error message, but either > > the luks pw prompt was still using english keyboard layouts or brought me to > > a rescue root shell after entering my luks pw, telling me about some issue > > with my keyboard(-layout?). > > Sadly i can't reproduce this anymore. Probably because of the dracut update > (to 044.1) i did in between. > > What i just tried: > 1. modify /etc/vconsole.conf: > > > KEYMAP=de-latin1-nodeadkeys > > FONT=eurlatgr.psfu > > FONT_MAP= > > FONT_UNIMAP= > > 2. run `dracut -f -v` and dracut does not show a "Could not find FONT_MAP > none! > " error. > > 3. reboot by entering luks pw in eng (should be german) > > The same happens when running `mkinitrd` instead of dracut. The issue with you keyboard layout must still be present if the correct keymap isn't set. Can you please reboot with the additional boot parameter: rd.debug and attach the output of: journalctl -axb when the machine is up again? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1124508] TW 20190205 Installer font much too small
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1124508 http://bugzilla.opensuse.org/show_bug.cgi?id=1124508#c27 --- Comment #27 from Felix Miata <mrmazda(a)earthlink.net> --- (In reply to Stefan Hundhammer from comment #25) > Felix, you are definitely right that screen resolution does make a difference, That's incomplete, thus inaccurate. Standing alone, screen resolution makes no difference. It's the combination of screen resolution and screen size that make a difference. The two combined are called display density, measured in DPI or PPI, commonly labeled HiDPI when the display's actual physical number is some arbitrarily above average number, likely the angularly defined reference pixel density 96 from CSS specifications times two, 192. 192 is reached on 4K screens at just under 23". On 2560x1440 192 is at just under 15.3", and 1920x1080 just under 11.5". Note in my comment #13 screenshot the reported 120 DPI is a logical DPI resulting from software settings. Logical DPI is the "knob" used for GTK/Gnome "scaling". Under the covers that knob is xrdb's Xft.dpi, which QT/KDE respond to when present, and indeed is implementor of the KDE desktop settings font tab value for "DPI". Physical PPI is the important number determining usability, the actual physical pixel density. > but please don't forget that this is the inst-sys with a much > more restricted environment and no KDE/GNOME/Xfce/whatever desktop to get > any defaults from. I get that. I think QT has a built-in initial value of 9pt, maybe 10pt, based on what I remember appears in the fonts tab when qt5ct is initialized on a virgin installation. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1123525] Errors during boot of updated system on Raspberry Pi 2
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.suse.com/show_bug.cgi?id=1123525 http://bugzilla.suse.com/show_bug.cgi?id=1123525#c23 Thomas Blume <thomas.blume(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |needinfo?(freek(a)opensuse.or | |g) --- Comment #23 from Thomas Blume <thomas.blume(a)suse.com> --- (In reply to Freek de Kruijf from comment #22) > (In reply to Thomas Blume from comment #21) > > So in my tests, the keymap setup in the initrd fails, when using the .gz > > suffix. > > Could you please set: > > > > KEYMAP=us.map > > > > in /etc/vconsole.conf > > > > then run: > > > > mkinitrd > > > > and reboot with the boot option "quiet" removed and the boot option "debug" > > set? > > Could not find quiet in /boot/grub2/grub.cfg > Added at the end of the line starting with linux debug > The line now reads: > linux /boot/zImage-4.12.14-lp150.12.45-lpae > root=UUID=fb7f00e9-5158-46a5-8768-90577062e283 loglevel=3 splash=silent > plymouth.enable=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200n8 > kgdboc=ttyAMA0,115200 rootflags=commit=120,data=writeback > root=UUID=fb7f00e9-5158-46a5-8768-90577062e283 rw debug > > > > Afterwards, please attach the output of: > > > > journalctl -axb | grep systemd-vconsole-setup > > # journalctl -axb | grep systemd-vconsole-setup > -- Subject: Unit systemd-vconsole-setup.service has finished start-up > -- Unit systemd-vconsole-setup.service has finished starting up. Seems that he vconsole setup error is fixed with this configuration. Can you confirm this? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1123747] AUDIT-0: udisks2: polkit-untracked-privilege
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.suse.com/show_bug.cgi?id=1123747 http://bugzilla.suse.com/show_bug.cgi?id=1123747#c3 --- Comment #3 from Swamp Workflow Management <swamp(a)suse.de> --- This is an autogenerated message for OBS integration: This bug (1123747) was mentioned in https://build.opensuse.org/request/show/672425 Factory / polkit-default-privs -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1121615] cura-lulzbot does not show any materials
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.suse.com/show_bug.cgi?id=1121615 http://bugzilla.suse.com/show_bug.cgi?id=1121615#c3 Adrian Schröter <adrian(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #3 from Adrian Schröter <adrian(a)suse.com> --- This got fixed in Factory and "science" project. I would do a maintenance update, but the newer 3.6.1 is not official yet afaik (even though tagged in git). -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1124605] New: bind: /var/lib/named/master not writable
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1124605 Bug ID: 1124605 Summary: bind: /var/lib/named/master not writable Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: All OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: magnus.holmgren(a)millnet.se QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- /var/lib/named/master is owned by root:root, unlike /var/lib/named/slave, but with dynamic DNS and automatic zone signing, named needs to write there too (unless one disregards the suggested directory structure and puts such zone files in a different directory). The journal file location can be overridden per zone, but not the .signed file created by inline signing, AFAICT. Would changing the owner of /var/lib/named/master to named:named too be too insecure? -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1124581] Missing '/' mount point
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.suse.com/show_bug.cgi?id=1124581 http://bugzilla.suse.com/show_bug.cgi?id=1124581#c3 Steffen Winterfeldt <snwint(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P2 - High Status|NEW |CONFIRMED URL| |https://trello.com/c/5lTMnx | |Hm Assignee|yast2-maintainers(a)suse.de |yast-internal(a)suse.de --- Comment #3 from Steffen Winterfeldt <snwint(a)suse.com> --- Tracking in YaST Scrum board. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 968033] zypper displays same action multiple times
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.novell.com/show_bug.cgi?id=968033 http://bugzilla.novell.com/show_bug.cgi?id=968033#c3 Benjamin Zeller <bzeller(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |CONFIRMED CC| |bzeller(a)suse.com Severity|Minor |Enhancement --- Comment #3 from Benjamin Zeller <bzeller(a)suse.com> --- Still happens with current zypper version, set to enhancement -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1094314] Create new package which conflicts with salt version > 2016
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

1 0

[Bug 1124581] Missing '/' mount point
by bugzilla_noreply＠novell.com 07 Feb '19

07 Feb '19

http://bugzilla.suse.com/show_bug.cgi?id=1124581 http://bugzilla.suse.com/show_bug.cgi?id=1124581#c2 --- Comment #2 from Steffen Winterfeldt <snwint(a)suse.com> --- Lost in btrfs subvolume magic, I'd say. -- You are receiving this mail because: You are on the CC list for the bug.

1 0