October 2019 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1142654] New: libstdc++.so misses SDT probes
by bugzilla_noreply＠novell.com 22 Mar '22

22 Mar '22

http://bugzilla.suse.com/show_bug.cgi?id=1142654 Bug ID: 1142654 Summary: libstdc++.so misses SDT probes Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: tdevries(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- There's a gdb feature (since v7.10, 2015) that allows to set a catchpoint using a regexp. There's a limitation mentioned in the docs ( https://sourceware.org/gdb/current/onlinedocs/gdb/Set-Catchpoints.html#Set-… ): ... The regular expression feature and the $_exception convenience variable rely on the presence of some SDT probes in libstdc++. If these probes are not present, then these features cannot be used. These probes were first available in the GCC 4.8 release, but whether or not they are available in your GCC also depends on how it was built. ... AFAICT, on my Leap 15.0 system, libstdc++.so does not have these SDT probes, which is why I ran into this ( https://sourceware.org/bugzilla/show_bug.cgi?id=24830 ) gdb testsuite failure. -- You are receiving this mail because: You are on the CC list for the bug.

2 14

[Bug 1139983] New: MOTD/Banner displays incorrect temporary ipv6 address
by bugzilla_noreply＠novell.com 21 Mar '22

21 Mar '22

http://bugzilla.suse.com/show_bug.cgi?id=1139983 Bug ID: 1139983 Summary: MOTD/Banner displays incorrect temporary ipv6 address Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kubic Assignee: kubic-bugs(a)opensuse.org Reporter: william.brown(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Welcome to openSUSE MicroOS (x86_64) - Kernel 5.1.10-1-default (ttyS0). SSH host key: SHA256:6QuFaJra32Q8YuDkPOAvBPuacPy/LTCfsXHyJyylX8c (RSA) SSH host key: SHA256:4k9o1M7R+Udl45mZ22fbh8zE8V4Euldaa+zwW6OpTC8 (DSA) SSH host key: SHA256:owuHie1/KxmL5AakWgsUCnMFUTZWbg5FUeuZmCgZ6oo (ECDSA) SSH host key: SHA256:f/etHr1/kSajCkJJifh+tfD0M+txifFYTIy9yJDGOLc (ED25519) ens3: 172.24.15.18 2001:44b8:2155:2c15:b920:673c:ab7a:e897 linux-om6d login: root Password: linux-om6d:~ # ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:22:b9 brd ff:ff:ff:ff:ff:ff inet 172.24.15.18/24 brd 172.24.15.255 scope global ens3 valid_lft forever preferred_lft forever inet6 2001:44b8:2155:2c15:b920:673c:ab7a:e897/64 scope global temporary dynamic valid_lft 86366sec preferred_lft 14366sec inet6 2001:44b8:2155:2c15:5054:ff:fe12:22b9/64 scope global dynamic mngtmpaddr valid_lft 86366sec preferred_lft 14366sec inet6 fe80::5054:ff:fe12:22b9/64 scope link valid_lft forever preferred_lft forever Note that the banner is displaying the global temporary address, rather than the dynamic mngtm address which is fixed. This means that if someone was to copy-paste from the banner to their DNS they would be registering an ephemeral address rather than the correct one. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1099563] New: Texlive/XeTeX crashes when processing specific PNGs
by bugzilla_noreply＠novell.com 17 Mar '22

17 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1099563 Bug ID: 1099563 Summary: Texlive/XeTeX crashes when processing specific PNGs Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: stefan.bruens(a)rwth-aachen.de QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- XeTex crashes or embeds random data due to out-of-bounds accesses when processing PNG images with no more than 16 colors and transparency (1/2/4 bit palette). This has been reported as upstream issue #151, https://sourceforge.net/p/xetex/bugs/151/ The bug is fixed in TL 2018. This causes e.g. building of the latest KICAD documentation to fail. Fixed version is available here: https://build.opensuse.org/package/show/home:StefanBruens:branches:SUSE:SLE… -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 924591] New: Apache2 doesn't start with faulty config, prob from yast
by bugzilla_noreply＠novell.com 14 Mar '22

14 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=924591 Bug ID: 924591 Summary: Apache2 doesn't start with faulty config, prob from yast Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: armv7 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: volker3204(a)paradise.net.nz QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Running yast http-server module, making basically no changes to get basic config. No vhosts, ssl, etc. Btw a server name can't be entered, the value is going to /dev/null. Starting apache gives: Mar 27 14:37:35 cubie start_apache2[9361]: Module "authz_default" is not installed, ignoring. Mar 27 14:37:35 cubie start_apache2[9361]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. Mar 27 14:37:35 cubie start_apache2[9361]: AH00526: Syntax error on line 10 of /etc/apache2/mod_status.conf: Mar 27 14:37:35 cubie start_apache2[9361]: Invalid command 'Require', perhaps misspelled or defined by a module not included in the server configuration Mar 27 14:37:36 cubie start_apache2[9378]: Module "authz_default" is not installed, ignoring. Mar 27 14:37:36 cubie start_apache2[9378]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. Mar 27 14:37:36 cubie start_apache2[9378]: AH00526: Syntax error on line 10 of /etc/apache2/mod_status.conf: Mar 27 14:37:36 cubie start_apache2[9378]: Invalid command 'Require', perhaps misspelled or defined by a module not included in the server configuration Mar 27 14:37:36 cubie systemd[1]: Failed to start The Apache Webserver. In the yast http-server server-modules tab authz_default is listed with a description of "unknown", i.e. none. The module does not exist on disk! Editing /etc/sysconfig/apache2 adding authz_core to APACHE_MODULES makes authz_core also be shown with a description of "unknown". systemctl restart apache2 is now successful. This bnc:835484#6 basically says yast http-server module is foobared, so it's probably best to uninstall it. -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 918705] New: alpine locking failure (against procmail) leads to mail corruption
by bugzilla_noreply＠novell.com 11 Mar '22

11 Mar '22

http://bugzilla.suse.com/show_bug.cgi?id=918705 Bug ID: 918705 Summary: alpine locking failure (against procmail) leads to mail corruption Classification: openSUSE Product: openSUSE Factory Version: 201502* Hardware: x86-64 OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: gp(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- This is something I started to see a bit ago, and since it now happened twice today I figured I'd report it. When I obtain mail via fetchmail, using procmail as the delivery agent, occasionally I get corrupted mails like the following (in mbox format): ==== snip ==== >From gp Thu Feb 19 18:56:54 2015 Mime-Version: 1.0 Date: Thu, 19 Feb 2015 18:56:00 +0100 Subject: AW: Re: Your help needed: Fwd: Comment opportunity: Software Status: RO X-Status: X-Keywords: X-UID: 9310 definedstorage Subject: AW: Re: Your help needed: Fwd: Comment opportunity: Software definedstorage References: <54E302D90200006F00158C8B(a)suse.com> <54E2D72A0200002B000A1B55(a)suse.com> <54E339FA0200006F00158DBD(a)suse.com> <54E2D7DE0200002B000A1B68(a)suse.com> <alpine.LSU.2.11.1502191739290.2252(a)ghan.fvgr> In-Reply-To: <alpine.LSU.2.11.1502191739290.2252(a)ghan.fvgr> Message-ID: <54E623B70200006F001594A6(a)suse.com> From: ... To: "Gerald Pfeifer" <gp(a)suse.com> ==== snap ==== This does not happen daily, and I believe it happens especially when I have been offline for several hours and a few dozen e-mails are delivered at once (though this specific case was not that). The same configuration had been working for years without ever showing this problem, and it looks like looking on the Alpine side (or procmail, though less likely I guess, since it essentially only reads :0 INBOX ) -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1102075] New: [Build 20180719] openQA test fails in rails
by bugzilla_noreply＠novell.com 10 Mar '22

10 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1102075 Bug ID: 1102075 Summary: [Build 20180719] openQA test fails in rails Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: https://openqa.opensuse.org/tests/709954/modules/rails /steps/12 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Ruby Assignee: ruby-devel(a)suse.de Reporter: dimstar(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- ## Observation openQA test in scenario opensuse-Tumbleweed-DVD-x86_64-extra_tests_in_textmode@64bit fails in [rails](https://openqa.opensuse.org/tests/709954/modules/rails/steps/12) ## Reproducible Fails since (at least) Build [20180714](https://openqa.opensuse.org/tests/708132) ## Expected result Last good: [20180714](https://openqa.opensuse.org/tests/707517) (or more recent) ## Further details Always latest result in this scenario: [latest](https://openqa.opensuse.org/tests/latest?arch=x86_64&version=Tumble… The rails stack is (once again) broken: the sqlite3 module seems not to be present after executing the test. the test-code does: > zypper -n in -C "rubygem(rails)" > rails new mycoolapp --skip-bundle --skip-test > cd mycoolapp > (rails server -b 0.0.0.0 &) -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 1038403] New: NetworkManager: Usage of systemctrl enable should be changed to %sytemd_add_pre/post
by bugzilla_noreply＠novell.com 09 Mar '22

09 Mar '22

http://bugzilla.suse.com/show_bug.cgi?id=1038403 Bug ID: 1038403 Summary: NetworkManager: Usage of systemctrl enable should be changed to %sytemd_add_pre/post Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: sckang(a)suse.com Reporter: behlert(a)suse.com QA Contact: qa-bugs(a)suse.de CC: fcrozat(a)suse.com Found By: --- Blocker: --- "systemctl preset-all" is intended to return service states to a factory state based on presets. But currently we can see breakages in some products due to services that are not following the guidelines as described in https://en.opensuse.org/openSUSE:Systemd_packaging_guidelines#Enabling_syst… The package NetworkManager was identified to use "systemctl enable" in its spec-file, and it should get replaced by the proper use of %sytemd_add_pre/post and preset. Please check your package, thanks. -- You are receiving this mail because: You are on the CC list for the bug.

2 11

[Bug 1095747] New: python-wxPython missing libraries
by bugzilla_noreply＠novell.com 08 Mar '22

08 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1095747 Bug ID: 1095747 Summary: python-wxPython missing libraries Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: petr(a)cervinka.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Libraries are missing and wxPython doesn't work: $ python3 Python 3.6.5 (default, Mar 31 2018, 19:45:04) [GCC] on linux Type "help", "copyright", "credits" or "license" for more information. >>> import wx Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib64/python3.6/site-packages/wx/__init__.py", line 17, in <module> from wx.core import * File "/usr/lib64/python3.6/site-packages/wx/core.py", line 12, in <module> from ._core import * ModuleNotFoundError: No module named 'wx._core' $wxdemo Traceback (most recent call last): File "/usr/bin/wxdemo", line 11, in <module> load_entry_point('wxPython==4.0.1', 'console_scripts', 'wxdemo')() File "/usr/lib/python3.6/site-packages/pkg_resources/__init__.py", line 476, in load_entry_point return get_distribution(dist).load_entry_point(group, name) File "/usr/lib/python3.6/site-packages/pkg_resources/__init__.py", line 2700, in load_entry_point return ep.load() File "/usr/lib/python3.6/site-packages/pkg_resources/__init__.py", line 2318, in load return self.resolve() File "/usr/lib/python3.6/site-packages/pkg_resources/__init__.py", line 2324, in resolve module = __import__(self.module_name, fromlist=['__name__'], level=0) File "/usr/lib64/python3.6/site-packages/wx/__init__.py", line 17, in <module> from wx.core import * File "/usr/lib64/python3.6/site-packages/wx/core.py", line 12, in <module> from ._core import * ModuleNotFoundError: No module named 'wx._core' Libraries are excluded from main package in files section in spec file: %exclude %{python_sitearch}/wx/*.so And put into devel package: %files %{python_files devel} %defattr(-,root,root) %{python_sitearch}/wx/*.so -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1096321] New: AutoYaST auth-client warning
by bugzilla_noreply＠novell.com 04 Mar '22

04 Mar '22

http://bugzilla.suse.com/show_bug.cgi?id=1096321 Bug ID: 1096321 Summary: AutoYaST auth-client warning Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Minor Priority: P5 - None Component: AutoYaST Assignee: yast2-maintainers(a)suse.de Reporter: jmader2(a)gmu.edu QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- On screen during the autoinstallation, some text was blocked with startup messages, _key?' for "yes":String Caller: /usr/share/YaST2/lib/authui/autoclient.rb:46:in `import` Could be this, if sssd.has_key?('listentry') And in my autoinst.xml file I have, <auth-client> <sssd>yes</sssd> <sssd_conf> ... </sssd_conf> </auth-client> -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 1129036] New: bash: update-alternative handling causes errors
by bugzilla_noreply＠novell.com 04 Mar '22

04 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1129036 Bug ID: 1129036 Summary: bash: update-alternative handling causes errors Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: dimstar(a)opensuse.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Bash has been changed to take /bin/sh under control of update-alternatives. somewhat a noble goal, but while building live isos at leats, resulted in errors, as there is an install cycle between bash (requiring updtae-alternatives in the post script) and update-alternatives (requiring /bin/sh to execute its post script, migrating data) SO, unless u-a manages to run its post script as lua code without an external dependency on /bin/sh, there is no chance to get this /bin/sh update-alternative managed for the time being -- You are receiving this mail because: You are on the CC list for the bug.

2 5