July 2018 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 1059247] shim-install: no valid efi partition
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.suse.com/show_bug.cgi?id=1059247 http://bugzilla.suse.com/show_bug.cgi?id=1059247#c7 Stefan Schubert <schubi(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |NORESPONSE --- Comment #7 from Stefan Schubert <schubi(a)suse.com> --- Feel free to reopen the bug if you can provide the requested information. Thank you ! -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1096775] New: autoinstallation appending
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.suse.com/show_bug.cgi?id=1096775 Bug ID: 1096775 Summary: autoinstallation appending Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: x86-64 OS: Linux Status: NEW Severity: Minor Priority: P5 - None Component: AutoYaST Assignee: yast2-maintainers(a)suse.de Reporter: jmader2(a)gmu.edu QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- I use the following options in grub.cfg on installation media to start autoinstallation, splash=verbose autoyast=usb:///CTRL/ instmode=http netsetup=dhcp language=en_US textmode=1 mem=4g And in the autoyast file, just have, <bootloader><global><append>plymouth.enable=0</append> But, rather unexpectedly found that AutoYaST is also adding "instmode=http mem=4g" to the installed system grub.cfg. I would think that the <append/> should override everything from the installation media grub.cfg. At the very least it should strip 'instmode=http'. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 1099835] wpa_supplicant does not read "private_key_passwd" from /etc/wpa_supplicant/wpa_supplicant.conf anymore
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.novell.com/show_bug.cgi?id=1099835 Tomáš Chvátal <tchvatal(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|bnc-team-screening(a)forge.pr |ro(a)suse.com |ovo.novell.com | -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1099875] Ninja IDE does not work in Leap 15.0
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

1 0

[Bug 1099877] Peek missing a dependency on ffmpeg
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.novell.com/show_bug.cgi?id=1099877 Tomáš Chvátal <tchvatal(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|bnc-team-screening(a)forge.pr |matthias(a)mailaender.name |ovo.novell.com | -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1099886] snapperd coring
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.novell.com/show_bug.cgi?id=1099886 http://bugzilla.novell.com/show_bug.cgi?id=1099886#c2 Tomáš Chvátal <tchvatal(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Assignee|bnc-team-screening(a)forge.pr |aschnell(a)suse.com |ovo.novell.com | --- Comment #2 from Tomáš Chvátal <tchvatal(a)suse.com> --- Please also attach the core to review it, without the information it is not possible to fix this issue. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 1099899] New: btrfs maintenance makes OS unresponsive
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.novell.com/show_bug.cgi?id=1099899 Bug ID: 1099899 Summary: btrfs maintenance makes OS unresponsive Classification: openSUSE Product: openSUSE Distribution Version: Leap 15.0 Hardware: Other OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: nettezzaumanaa(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hello, reporting for leap this reported also as this one #1063638 on fast ssd it takes 6+ minutes, system is mostly unresponsive # journalctl -b 0 -u btrfs\* -- Logs begin at Mon 2018-07-02 20:55:02 CEST, end at Mon 2018-07-02 21:11:01 CEST. -- Jul 02 20:55:16 linux-1b6m systemd[1]: Started Scrub btrfs filesystem, verify block checksums. Jul 02 20:55:16 linux-1b6m systemd[1]: Started Watch /etc/sysconfig/btrfsmaintenance. Jul 02 20:55:16 linux-1b6m systemd[1]: Started Balance block groups on a btrfs filesystem. Jul 02 20:55:16 linux-1b6m systemd[1]: Starting Update cron periods from /etc/sysconfig/btrfsmaintenance... Jul 02 20:55:16 linux-1b6m btrfsmaintenance-refresh-cron.sh[1678]: Refresh script btrfs-scrub.sh for uninstall Jul 02 20:55:16 linux-1b6m btrfsmaintenance-refresh-cron.sh[1678]: Refresh script btrfs-defrag.sh for uninstall Jul 02 20:55:16 linux-1b6m btrfsmaintenance-refresh-cron.sh[1678]: Refresh script btrfs-balance.sh for uninstall Jul 02 20:55:16 linux-1b6m btrfsmaintenance-refresh-cron.sh[1678]: Refresh script btrfs-trim.sh for uninstall Jul 02 20:55:16 linux-1b6m btrfsmaintenance-refresh-cron.sh[1678]: Refresh timer btrfs-scrub for monthly Jul 02 20:55:16 linux-1b6m btrfsmaintenance-refresh-cron.sh[1678]: Refresh timer btrfs-defrag for none Jul 02 20:55:17 linux-1b6m btrfsmaintenance-refresh-cron.sh[1678]: Refresh timer btrfs-balance for weekly Jul 02 20:55:17 linux-1b6m systemd[1]: Started Balance block groups on a btrfs filesystem. Jul 02 20:55:17 linux-1b6m btrfsmaintenance-refresh-cron.sh[1678]: Refresh timer btrfs-trim for none Jul 02 20:55:17 linux-1b6m btrfs-balance.sh[1888]: Before balance of / Jul 02 20:55:17 linux-1b6m btrfs-balance.sh[1888]: Data, single: total=15.01GiB, used=12.50GiB Jul 02 20:55:17 linux-1b6m btrfs-balance.sh[1888]: System, single: total=32.00MiB, used=16.00KiB Jul 02 20:55:17 linux-1b6m btrfs-balance.sh[1888]: Metadata, single: total=1.01GiB, used=745.58MiB Jul 02 20:55:17 linux-1b6m btrfs-balance.sh[1888]: GlobalReserve, single: total=44.00MiB, used=0.00B Jul 02 20:55:17 linux-1b6m btrfs-balance.sh[1888]: Filesystem Size Used Avail Use% Mounted on Jul 02 20:55:17 linux-1b6m btrfs-balance.sh[1888]: /dev/mapper/rpool-root 33G 15G 18G 45% / Jul 02 20:55:17 linux-1b6m systemd[1]: Started Update cron periods from /etc/sysconfig/btrfsmaintenance. Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 0 out of 22 chunks Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x1, state 0x0, force is off Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: DATA (flags 0x2): balancing, usage=1 Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 0 out of 22 chunks Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x1, state 0x0, force is off Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: DATA (flags 0x2): balancing, usage=5 Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 0 out of 22 chunks Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x1, state 0x0, force is off Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: DATA (flags 0x2): balancing, usage=10 Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 0 out of 22 chunks Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x1, state 0x0, force is off Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: DATA (flags 0x2): balancing, usage=20 Jul 02 20:55:19 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 0 out of 22 chunks Jul 02 20:56:47 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x1, state 0x0, force is off Jul 02 20:56:47 linux-1b6m btrfs-balance.sh[1888]: DATA (flags 0x2): balancing, usage=30 Jul 02 20:56:47 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 1 out of 22 chunks Jul 02 20:57:29 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x1, state 0x0, force is off Jul 02 20:57:29 linux-1b6m btrfs-balance.sh[1888]: DATA (flags 0x2): balancing, usage=40 Jul 02 20:57:29 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 1 out of 22 chunks Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x1, state 0x0, force is off Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: DATA (flags 0x2): balancing, usage=50 Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 1 out of 22 chunks Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 0 out of 22 chunks Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x6, state 0x0, force is off Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: METADATA (flags 0x2): balancing, usage=1 Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: SYSTEM (flags 0x2): balancing, usage=1 Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 1 out of 22 chunks Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x6, state 0x0, force is off Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: METADATA (flags 0x2): balancing, usage=5 Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: SYSTEM (flags 0x2): balancing, usage=5 Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 1 out of 22 chunks Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x6, state 0x0, force is off Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: METADATA (flags 0x2): balancing, usage=10 Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: SYSTEM (flags 0x2): balancing, usage=10 Jul 02 20:58:10 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 1 out of 22 chunks Jul 02 20:58:11 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x6, state 0x0, force is off Jul 02 20:58:11 linux-1b6m btrfs-balance.sh[1888]: METADATA (flags 0x2): balancing, usage=20 Jul 02 20:58:11 linux-1b6m btrfs-balance.sh[1888]: SYSTEM (flags 0x2): balancing, usage=20 Jul 02 20:58:11 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 1 out of 22 chunks Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: Dumping filters: flags 0x6, state 0x0, force is off Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: METADATA (flags 0x2): balancing, usage=30 Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: SYSTEM (flags 0x2): balancing, usage=30 Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: Done, had to relocate 2 out of 22 chunks Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: After balance of / Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: Data, single: total=15.01GiB, used=12.50GiB Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: System, single: total=32.00MiB, used=16.00KiB Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: Metadata, single: total=1.01GiB, used=746.77MiB Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: GlobalReserve, single: total=44.50MiB, used=0.00B Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: Filesystem Size Used Avail Use% Mounted on Jul 02 21:02:26 linux-1b6m btrfs-balance.sh[1888]: /dev/mapper/rpool-root 33G 15G 18G 45% / also if you change the timer settings in /etc/systemd/system/btrfs-balance.d/schedule.conf the interval to something else (eg you comment out OnCalendar=weekly) it enigmatically restores this setting on reboot .. btrfs maintenance is simply production killer .. needs to be removed .. in 10/10 times here it causes on server with mechanical disk to switchover HAed application from active to standby node regards, daniel -- You are receiving this mail because: You are on the CC list for the bug.

1 1

[Bug 899627] New: p7zip package is missing 7zr executable
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.opensuse.org/show_bug.cgi?id=899627 Bug ID: 899627 Summary: p7zip package is missing 7zr executable Classification: openSUSE Product: openSUSE 13.1 Version: Final Hardware: x86-64 OS: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: me(a)shadsterling.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- /usr/bin/7zr, the "stand-alone" program that only handles the 7-zip format is missing from the p7zip package. /usr/bin/7z and /usr/bin/7za are included, as are man pages are for 7z, 7za, and 7zr. -- You are receiving this mail because: You are on the CC list for the bug.

1 10

[Bug 1097856] New: Package LXQt 0.13.0
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.suse.com/show_bug.cgi?id=1097856 Bug ID: 1097856 Summary: Package LXQt 0.13.0 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: LXDE Assignee: andrea(a)opensuse.org Reporter: mvetter(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Update waits in X11:LXQt since a while already. Creating this bug to keep track of what needs to be done. -- You are receiving this mail because: You are on the CC list for the bug.

1 6

[Bug 1099778] New: Missing keys in Czech UCW keybord layout.
by bugzilla_noreply＠novell.com 03 Jul '18

03 Jul '18

http://bugzilla.opensuse.org/show_bug.cgi?id=1099778 Bug ID: 1099778 Summary: Missing keys in Czech UCW keybord layout. Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: All OS: openSUSE Factory Status: NEW Severity: Normal Priority: P5 - None Component: X.Org Assignee: xorg-maintainer-bugs(a)forge.provo.novell.com Reporter: honzikcernoh(a)gmail.com QA Contact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- The czech UCW layout should contain all accented letters, that are present in the Czech language and some other accented letters, that are present on the remining keys. For instance, there are many ways how an 's' can be accented, but there is only one way in the Czech language, which is š. So where on the QWRERTY keyboard would be s, here is š. In combination with Shift, the keyboard layout contains the capital forms of the letters, which can be typed also with CapsLock. To the problem: the Ě and Š letters can be written only with CapsLock, not with Shift, even though the layout file defines them correctly. How to reproduce: setxkbmap "cz(ucw)" CAUTION! If you write the command in the way showed above, you will replace all your normal letters and will not be able to write a command to revert the change. Use multiple layouts at once and select a keyboard shortcut to switch them. -- You are receiving this mail because: You are on the CC list for the bug.

1 20