January 2018 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 907495] New: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed)
by bugzilla_noreply＠novell.com 26 Aug '22

26 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=907495 Bug ID: 907495 Summary: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed) Classification: openSUSE Product: openSUSE 12.3 Version: Final Hardware: Other OS: openSUSE 13.2 Status: NEW Severity: Major Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: hpj(a)urpla.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When adding a manual route to a dhcp configured eth interface managed by wicked, the dhcp setup fails with a silly message: device enp7s0 failed: "call to org.opensuse.Network.Addrconf.ipv4.static.requestLease failed: General failure" Add a manual route to a dhcp configured interface and restart your system. Be prepared, that this interface will not come up correctly. BTW: the routing editor allows selecting configured interfaces only. The usual order is: setup interface, add route, but you have to confirm the interface setup first, reenter yast network and add the interface based route there after. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 992494] New: áÁéÉíÍóÓúÚüÜ cannot be typed in any app using Asturian language and spanish Asturian variant keyboard
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=992494 Bug ID: 992494 Summary: áÁéÉíÍóÓúÚüÜ cannot be typed in any app using Asturian language and spanish Asturian variant keyboard Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: All OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: enolp(a)softastur.org QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The key combination for typing áÁéÉíÍóÓúÚüÜ does not working, (they appear as aAeEiIoOuUuU), by setting "España - asturianu (ast_ES)" locale and "Asturian (Spain, with bottom-dot H and bottom-dot L)" keyboard layout in any application. However, Ḥḥ, Ḷḷ and Ññ Asturian letters are typed correctly in KDE and GTK applications except Firefox, where all works perfectly. yast2-country package was recently patched because of a similar bug, but updating it, doesn't fix the problem. https://bugzilla.suse.com/show_bug.cgi?id=981008 -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 938955] New: Desktop selection overridden when installing without recommended packages.
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=938955 Bug ID: 938955 Summary: Desktop selection overridden when installing without recommended packages. Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: cwh(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Chosing not to install recommnded packages leads to a minimal installation even without xorg and desktop environment although a desktop environment has been selected before. Either the patterns have to be fixed or the no-recommends option should only be allowed for the minimal pattern. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1074138] New: Yast2 package manager UI very slow
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=1074138 Bug ID: 1074138 Summary: Yast2 package manager UI very slow Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: amajer(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- I have a basic install. I would like to look through installed package list and uninstall extra things I don't really need anymore. So, 1. yast2 -> Package Manager 2. list all packages 3. click on a package like Mesa-libGLESv2-devel and click uninstall 4. wait 30+ seconds while Package Manager window is completely unresponsive and 100% CPU usage. workaround, 1. filter to only list few packages. 2. click uninstall Please fix. There is no reason Qt based UI should be slow, especially for simple tables like this. This problems seems to exist in all versions of Yast. -- You are receiving this mail because: You are on the CC list for the bug.

2 14

[Bug 948370] New: One-Click-Installer YMP file cannot match group section for Tumbleweed
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=948370 Bug ID: 948370 Summary: One-Click-Installer YMP file cannot match group section for Tumbleweed Classification: openSUSE Product: openSUSE Factory Version: 2015* Hardware: Other OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: tgoettlicher(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:39.0) Gecko/20100101 Firefox/39.0 Build Identifier: One-Click-Installer YMP files can contain sections for different distribution versions, e.g.: <group distversion="openSUSE 13.2"> You can match against a specific Tumbleweed build: <group distversion="openSUSE 20150924"> But it's not possible to match for Tumbleweed in general because the version of Tumbleweed changes with every build. Can the one-click-installer be extended to not only match against the version but also against the codename? For example: <group distcodename="openSUSE Tumbleweed"> Reproducible: Always -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 930110] New: yast ncurses menus not properly formatted for tumbleweed ppc64 guest install
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=930110 Bug ID: 930110 Summary: yast ncurses menus not properly formatted for tumbleweed ppc64 guest install Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: PowerPC-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: normand(a)linux.vnet.ibm.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- yast ncurses menus not properly formatted for tumbleweed ppc64 guest install Detailed flow: * On a Power KVM host I defined a libvirt twppc64.xml using the Tumbleweed-BE-DVD-ppc64-Snapshot20150505-Media.iso retrieved from https://openqa.opensuse.org/tests/60778/asset/3110 * from a ssh session to the PowerKVM I started a screen window from which I started the ppc64 guest. === virsh define twppc64.xml virsh start --console twppc64 === * I captured successively the ncurses menus and did a yast2_ncurse_bad_format.tgz tarball with all those png files. * The first problem is that the text is not properly aligned eg: yast2_img1_installation.png * The 2nd problem is that some characters from previous menu are not cleaned up when new menu is presented. eg: yast2_img4_installation_option.png * The third problem is popup window hardly visible eg: yast2_img9_confirm_password.png -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 980750] New: Plymouth prevents loading DRM/KMS driver for newly installed graphics card
by bugzilla_noreply＠novell.com 22 Aug '22

22 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=980750 Bug ID: 980750 Summary: Plymouth prevents loading DRM/KMS driver for newly installed graphics card Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.1 Hardware: All OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: maximilian.staudt(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When changing a VGA card in an already installed system, Plymouth will prevent its modern (DRM/KMS) kernel mode driver to be loaded. Example: 1. Install Leap 42.1 in QEMU using the emulated Cirrus card (-vga cirrus). 2. The system boots up with a splash screen. 3. Shut down the system. 4. Start the VM, this time with the Bochs VGA card (-vga std). 5. A splash screen will be shown, but then X falls back to the VESA driver. As a bonus, switching to a text VT (Ctrl-Alt-F1) only gives a blinking cursor. The VT works just fine and is usable, except the user has to operate it blindly as no video is shown. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1012883] New: System hangs at reboot/shutdown: A stop job is running for User Manager for UID 1000 (1min30)
by bugzilla_noreply＠novell.com 15 Aug '22

15 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1012883 Bug ID: 1012883 Summary: System hangs at reboot/shutdown: A stop job is running for User Manager for UID 1000 (1min30) Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: 64bit OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader Assignee: jsrain(a)suse.com Reporter: jeckferson(a)gmail.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- It's an upstream systemd bug as described in: https://github.com/systemd/systemd/issues/1615 It also manifested in 42.2. -- You are receiving this mail because: You are on the CC list for the bug.

2 28

[Bug 1073043] New: Krusader hang when copy or move files
by bugzilla_noreply＠novell.com 11 Aug '22

11 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=1073043 Bug ID: 1073043 Summary: Krusader hang when copy or move files Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE Applications Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: seifert(a)alesak.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- After some recent updates Krusader is unable to copy or move files (F5 or F6) however Dolphin, Copy/Paste or Drag and Drop in Krusader works normally There is no errors or crashes, running in gdb and break in hang state: #0 0x00007ffff17f7f40 in nanosleep () from /lib64/libc.so.6 #1 0x00007ffff2493cad in ?? () from /usr/lib64/libQt5Core.so.5 #2 0x00007ffff236e770 in QLockFile::tryLock(int) () from /usr/lib64/libQt5Core.so.5 #3 0x00007ffff49f3d69 in ?? () from /usr/lib64/libKF5ConfigCore.so.5 #4 0x00007ffff49ddb8f in KConfig::sync() () from /usr/lib64/libKF5ConfigCore.so.5 #5 0x00007ffff49de8e5 in KConfig::~KConfig() () from /usr/lib64/libKF5ConfigCore.so.5 #6 0x00007ffff4f155a6 in KRecentDocument::add(QUrl const&, QString const&) () from /usr/lib64/libKF5KIOCore.so.5 #7 0x00007ffff4f156cf in KRecentDocument::add(QUrl const&) () from /usr/lib64/libKF5KIOCore.so.5 #8 0x000055555567d113 in ?? () #9 0x000055555567dbdd in ?? () #10 0x0000555555636191 in ?? () #11 0x0000555555647ae9 in ?? () #12 0x0000555555647d2a in ?? () #13 0x00007ffff246b63a in QMetaObject::activate(QObject*, int, int, void**) () from /usr/lib64/libQt5Core.so.5 #14 0x00007ffff33cd982 in QAction::triggered(bool) () from /usr/lib64/libQt5Widgets.so.5 #15 0x00007ffff33cfe1c in QAction::activate(QAction::ActionEvent) () from /usr/lib64/libQt5Widgets.so.5 #16 0x00007ffff33d0625 in QAction::event(QEvent*) () from /usr/lib64/libQt5Widgets.so.5 #17 0x00007ffff33d3afc in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib64/libQt5Widgets.so.5 #18 0x00007ffff33daeb4 in QApplication::notify(QObject*, QEvent*) () from /usr/lib64/libQt5Widgets.so.5 #19 0x00007ffff243e128 in QCoreApplication::notifyInternal2(QObject*, QEvent*) () from /usr/lib64/libQt5Core.so.5 #20 0x00007ffff2a32272 in QShortcutMap::dispatchEvent(QKeyEvent*) () from /usr/lib64/libQt5Gui.so.5 #21 0x00007ffff2a3233a in QShortcutMap::tryShortcut(QKeyEvent*) () from /usr/lib64/libQt5Gui.so.5 #22 0x00007ffff29e4897 in QWindowSystemInterface::handleShortcutEvent(QWindow*, unsigned long, int, QFlags<Qt::KeyboardModifier>, unsigned int, unsigned int, unsigned int, QString const&, bool, unsigned short) () from /usr/lib64/libQt5Gui.so.5 #23 0x00007ffff2a029e7 in QGuiApplicationPrivate::processKeyEvent(QWindowSystemInterfacePrivate::KeyEvent*) () from /usr/lib64/libQt5Gui.so.5 #24 0x00007ffff2a076e5 in QGuiApplicationPrivate::processWindowSystemEvent(QWindowSystemInterfacePrivate::WindowSystemEvent*) () from /usr/lib64/libQt5Gui.so.5 #25 0x00007ffff29e0f9b in QWindowSystemInterface::sendWindowSystemEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/libQt5Gui.so.5 #26 0x00007fffe876d420 in ?? () from /usr/lib64/libQt5XcbQpa.so.5 #27 0x00007fffed2f9f97 in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0 #28 0x00007fffed2fa1d0 in ?? () from /usr/lib64/libglib-2.0.so.0 #29 0x00007fffed2fa25c in g_main_context_iteration () from /usr/lib64/libglib-2.0.so.0 #30 0x00007ffff249423f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/libQt5Core.so.5 #31 0x00007ffff243c73a in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/libQt5Core.so.5 #32 0x00007ffff2444fc4 in QCoreApplication::exec() () from /usr/lib64/libQt5Core.so.5 #33 0x00005555555edcb9 in ?? () #34 0x00007ffff1752f4a in __libc_start_main () from /lib64/libc.so.6 #35 0x00005555555ef49a in _start () to me it looks like it is waiting to obtain some lock but not sure... Interestingly enough when same Krusader is running in Root mode everything works normally. Version 2.6.0 Frameworks 5.40.0 Qt 5.9.2 -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1041443] New: Raspberry Pi 3: zypper unclear conflict resolution problem message
by bugzilla_noreply＠novell.com 10 Aug '22

10 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=1041443 Bug ID: 1041443 Summary: Raspberry Pi 3: zypper unclear conflict resolution problem message Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: libzypp Assignee: zypp-maintainers(a)forge.provo.novell.com Reporter: jeroen.forums.opensuse.org(a)pluimers.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 726808 --> http://bugzilla.suse.com/attachment.cgi?id=726808&action=edit part of zypper.solverTestCase files # Steps leading into this 1. Install Tumbleweed on Raspberry Pi 3 from https://web.archive.org/web/20170526140155/http://download.opensuse.org/rep… 2. On 20170525 perform `zypper --versbose refresh --force` and `zypper dist-upgrade` 3. On 20170528 perform `zypper dist-upgrade --no-allow-vendor-change` Expected: succeed Actual: ``` # zypper dist-upgrade --no-allow-vendor-change Loading repository data... Reading installed packages... Computing distribution upgrade... Problem: problem with installed package kernel-default-4.4.68-7.1.aarch64 Solution 1: keep obsolete kernel-default-4.4.68-7.1.aarch64 Choose the above solution using '1' or cancel using 'c' [1/c] (c): ``` Two important points: 1. Basically both the 1 and c will abort the upgrade so there is no way to perform `--no-allow-vendor-change` upgrades any more. 2. The reason for the "problem" is not revealed so it is unclear to get out of 1. Details: https://gist.github.com/jpluimers/a9ed0802d4314ba3bd662663c2b219a9 which has all the zypper.solverTestCase files -- You are receiving this mail because: You are on the CC list for the bug.

2 12