September 2017 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 955233] New: Software Updates applet shows "Network is offline"
by bugzilla_noreply＠novell.com 25 Jul '21

25 Jul '21

http://bugzilla.opensuse.org/show_bug.cgi?id=955233 Bug ID: 955233 Summary: Software Updates applet shows "Network is offline" Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.1 Hardware: x86-64 OS: openSUSE 42.1 Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: madakis1988(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- The applet occasionally shows that the "Network is offline" even though there's an active connection to the internet. There's no other connection enabled. This results in inability to check for updates. It usually goes back to normal after a reboot. YaST -> Online Update works fine every time. -- You are receiving this mail because: You are on the CC list for the bug.

2 14

[Bug 1039756] New: GNOME needs to support default.desktop in session directories
by bugzilla_noreply＠novell.com 19 Jul '21

19 Jul '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1039756 Bug ID: 1039756 Summary: GNOME needs to support default.desktop in session directories Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other URL: http://openqa.opensuse.org/tests/376325/modules/first_ boot/steps/21 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME Assignee: bnc-team-gnome(a)forge.provo.novell.com Reporter: fvogt(a)suse.com QA Contact: qa-bugs(a)suse.de CC: dimstar(a)opensuse.org, fvogt(a)suse.com, jreidinger(a)suse.com, lnussel(a)suse.com, lslezak(a)suse.com, mlin(a)suse.com, okurz(a)suse.com, simonf.lees(a)suse.com Depends on: 1030873 Found By: --- Blocker: --- +++ This bug was initially created as a clone of Bug #1030873 +++ If no default autologin session is defined, default.desktop (usually in /usr/share/xsessions, but can eventually be in wayland-sessions as well) is used by displaymanagers such as lightdm and sddm. This link is now created by update-alternatives for IceWM, Xfce, LXQt (sr not accepted yet), Plasma5 and enlightenment. This means that if GDM is used if one of those is installed, it will list default.desktop twice, as it is a symlink to a .desktop file in the same directory. lightdm and sddm are patched to recognize this properly. GDM should respect the default.desktop selection if nothing else is defined in /etc/sysconfig/displaymanager. GNOME should also register itself with update-alternatives, with the same priority as KDE (25), for reference: https://build.opensuse.org/package/rdiff/KDE:Frameworks5/plasma5-session?li… -- You are receiving this mail because: You are on the CC list for the bug.

2 5

[Bug 1054448] New: ncurses rendering is broken in xterm
by bugzilla_noreply＠novell.com 10 Jul '21

10 Jul '21

http://bugzilla.suse.com/show_bug.cgi?id=1054448 Bug ID: 1054448 Summary: ncurses rendering is broken in xterm Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: hguo(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Created attachment 737266 --> http://bugzilla.suse.com/attachment.cgi?id=737266&action=edit y2log Launching yast in xterm results in broken rendering of UI elements. Curiously, if environment variable TERM is set to something other than xterm, yast will render properly. -- You are receiving this mail because: You are on the CC list for the bug.

2 79

[Bug 940851] New: kye-data contains works with non-OSI license
by bugzilla_noreply＠novell.com 03 Jul '21

03 Jul '21

http://bugzilla.opensuse.org/show_bug.cgi?id=940851 Bug ID: 940851 Summary: kye-data contains works with non-OSI license Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: All OS: All Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: jengelh(a)inai.de QA Contact: qa-bugs(a)suse.de CC: cfarrell(a)suse.com, dimstar(a)opensuse.org, nemysis(a)gmx.ch Found By: --- Blocker: --- openSUSE:Factory/kye-data has Training.zip, whose txt file reads: 1. This is freeware so you can use it yourself or let others try it but I don't want you SELLING IT!!! TTBOMK, this incompatible with OSI-compatible licensing. Most of the other works (shipped in .zip files) have no license notice, however small, at all. vexkyelevels.zip does not appear to permit "use" (merely copying, distribution and modification). -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 977967] New: global package's gtag command cannot work with the option '--gtagslabel=pygments'
by bugzilla_noreply＠novell.com 30 Jun '21

30 Jun '21

http://bugzilla.opensuse.org/show_bug.cgi?id=977967 Bug ID: 977967 Summary: global package's gtag command cannot work with the option '--gtagslabel=pygments' Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.1 Hardware: x86-64 OS: openSUSE 42.1 Status: NEW Severity: Minor Priority: P5 - None Component: Development Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: goto.inct(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/50.0.2661.75 Safari/537.36 Build Identifier: I installed 'global' package using zypper and typed 'gtags --gtagslabel=pygments' in the terminal, then I get following warning. gtags: cannot open shared object '/usr/lib/gtags/pygments-parser.la'. Of course, gtags does not work correctly. Reproducible: Always Steps to Reproduce: 1. Install global (# zypper install global) 2. Use gtags (> gtags --gtagslabel-pygments) Actual Results: gtags: cannot open shared object '/usr/lib/gtags/pygments-parser.la'. Expected Results: Get GPATH, GRTAGS, GTAGS file into current directory without warning. Solution: This bug caused by inconsistence between /etc/gtags.conf and the path of 'pygments-parser.la'. 'gtags.conf' assume that 'pygments-parser.la' is in '/usr/lib/gtags/'. But actually, 'pygments-parser.la' is located in '/usr/lib64/gtags/'. Therefore we can fix this problem following commands: 'sudo sed -i -e "s/lib/lib64/g" /etc/gtags.conf'. -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 1055587] New: glibc v2.26 update exposes code issue in building qemu
by bugzilla_noreply＠novell.com 29 Jun '21

29 Jun '21

http://bugzilla.suse.com/show_bug.cgi?id=1055587 Bug ID: 1055587 Summary: glibc v2.26 update exposes code issue in building qemu Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KVM Assignee: kvm-bugs(a)forge.provo.novell.com Reporter: brogers(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- With the glibc v2.26 update, qemu-linux-user (at least) no longer builds. It seems a backport of qemu's git commit id 04b33e218 will resolve the issue. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 1013565] New: atftp daemon runs as root
by bugzilla_noreply＠novell.com 25 Jun '21

25 Jun '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1013565 Bug ID: 1013565 Summary: atftp daemon runs as root Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Security Assignee: security-team(a)suse.de Reporter: seroton10(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- A standard install of the atftpd package will run the daemon root, despite the clear intentions (sysconfig file, and options passed in service unit) to have it run as tftp. This is problematic because it allows tftp clients to overwrite all files served by atftpd, and to upload new ones, completely disregarding permissions set on directories and files under /srv/tftpboot. In my tests I let the service start via socket activation. -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 1042094] New: Always retain version n-1 in repo cache to facilitate package rollbacks
by bugzilla_noreply＠novell.com 20 Jun '21

20 Jun '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1042094 Bug ID: 1042094 Summary: Always retain version n-1 in repo cache to facilitate package rollbacks Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Download Infrastructure Assignee: lars.vogdt(a)suse.com Reporter: pointedstick(a)zoho.com QA Contact: lars.vogdt(a)suse.com Found By: --- Blocker: --- Picture this: you update a package and it's full of bugs! For example: https://bugzilla.opensuse.org/show_bug.cgi?id=1042090 So you want to roll back to the previous package version. You run `zypper search -s MozillaThunderbird` to find out what the the old version was: $ zypper search -s MozillaThunderbird Loading repository data... Reading installed packages... S | Name | Type | Version | Arch | Repository ---+----------------------------------------+---------+------------+--------+---------------------- i+ | MozillaThunderbird | package | 52.1.1-1.2 | x86_64 | Main Repository (OSS) $ Darn. Only the latest version is available. Now you can't do a rollback except by searching on software.opensuse.com, which is a royal pain. Zypper should always keep information about at least version n-1 for every package to facilitate rollbacks. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 1014366] New: Printing/cupscloudprint: Bug
by bugzilla_noreply＠novell.com 15 Jun '21

15 Jun '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1014366 Bug ID: 1014366 Summary: Printing/cupscloudprint: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software Assignee: Greg.Freemyer(a)gmail.com Reporter: dpbasti(a)wp.pl QA Contact: opensuse-communityscreening(a)forge.provo.novell.com CC: jsmeix(a)suse.com, sbrabec(a)suse.com, tchvatal(a)suse.com, werner(a)suse.com Found By: --- Blocker: --- for Leap 42.2 you need to add python-cups as the dependency for package otherwise when executing the python script you will see : /usr/share/cloudprint-cups/setupcloudprint.py Traceback (most recent call last): File "/usr/share/cloudprint-cups/setupcloudprint.py", line 63, in <module> import cups ImportError: No module named cups -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 1008667] New: graphical bootsplash does not show password query for LUKS encrypted partition
by bugzilla_noreply＠novell.com 15 Jun '21

15 Jun '21

http://bugzilla.opensuse.org/show_bug.cgi?id=1008667 Bug ID: 1008667 Summary: graphical bootsplash does not show password query for LUKS encrypted partition Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: dpbasti(a)wp.pl QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Instad of displaying a window askinf for /home partition password it shows tumblescreen logo only. It worked in Leap 42.1 but does not work in TUmbleweed. To the user it seems like the boot is stuck. Changnging to terminal alt-f1 shows the password query. -- You are receiving this mail because: You are on the CC list for the bug.

2 3