February 2017 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 935419] New: with 3 monitors on 2 graphic cards Xorg crash on xrandr change
by bugzilla_noreply＠novell.com 07 May '19

07 May '19

http://bugzilla.suse.com/show_bug.cgi?id=935419 Bug ID: 935419 Summary: with 3 monitors on 2 graphic cards Xorg crash on xrandr change Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: X.Org Assignee: xorg-maintainer-bugs(a)forge.provo.novell.com Reporter: tcech(a)suse.com QA Contact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- I found some spare monitor and graphic card so I wanted to put that all together. I started with 2 monitors attached to Intel graphic card (probably onboard). In BIOS is integrated Intel graphics set as the primary video. HDMI 1 and HDMI 2 +--------+ +-----+ | 1920 | |1080 | | 1080 | |1920 | +--------+ | | | | +-----+ $ xrandr --output HDMI1 \ --mode 1920x1080 --primary \ --output HDMI2 \ --mode 1920x1080 --rotate left --right-of HDMI1 I connected third monitor to spare Radeon graphic card. I tried to write my configuration by hand but in the end I wiped all my changes to /etc/X11/xorg.conf.d and did reboot. Luckily XRandr shown all the monitors as hoped. Unfortunately, when I pass command like this, Xorg dies with SIGSEGV. $ xrandr --output DVI-1-0 --mode 1280x1024 --rotate left --right-of HDMI2 I tried to put it all into single command with the same result. Any workaround would be appreciated as well. GDB shown this backtrace (gdb) bt #0 DamageRegister (pDrawable=0x0, pDamage=0x25d8c80) at damage.c:1715 #1 0x00000000004bcd39 in xf86RotatePrepare (pScreen=0x2082ad0) at xf86Rotate.c:170 #2 xf86RotateRedisplay (pScreen=0x2082ad0) at xf86Rotate.c:191 #3 xf86RotateBlockHandler (pScreen=0x2082ad0, pTimeout=0x7ffc1fb04778, pReadmask=0x827300 <LastSelectMask>) at xf86Rotate.c:242 #4 0x0000000000441787 in BlockHandler (pTimeout=pTimeout@entry=0x7ffc1fb04778, pReadmask=pReadmask@entry=0x827300 <LastSelectMask>) at dixutils.c:390 #5 0x0000000000587cbc in WaitForSomething (pClientsReady=pClientsReady@entry=0x24f83a0) at WaitFor.c:215 #6 0x000000000043cda1 in Dispatch () at dispatch.c:361 #7 0x0000000000440e2b in dix_main (argc=10, argv=0x7ffc1fb04b78, envp=<optimized out>) at main.c:298 #8 0x00007f20ed1a08c5 in __libc_start_main (main=0x42c430 <main>, argc=10, argv=0x7ffc1fb04b78, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7ffc1fb04b68) at libc-start.c:289 #9 0x000000000042c469 in _start () at ../sysdeps/x86_64/start.S:118 note that pDrawable=0 in damage.c you can see it has to die: 1713 DamageRegister(DrawablePtr pDrawable, DamagePtr pDamage) 1714 { 1715 ScreenPtr pScreen = pDrawable->pScreen; I can provide whole coredump if you tell me where to upload it. I'm running Tumbleweed, versions installed: # LC_ALL=C LANG=C zypper se -si xorg Loading repository data... Reading installed packages... S | Name | Type | Version | Arch | Repository --+-----------------------------+---------+------------------+--------+------------------ i | xorg-cf-files | package | 1.0.5-5.1 | noarch | repo-oss i | xorg-scripts | package | 1.0.1-10.1 | noarch | repo-oss i | xorg-sgml-doctools | package | 1.11-9.1 | noarch | repo-oss i | xorg-x11 | package | 7.6_1-16.1 | noarch | repo-oss i | xorg-x11-Xvnc | package | 7.6_1.0.1-15.1.3 | x86_64 | (System Packages) i | xorg-x11-devel | package | 7.6-47.1 | noarch | repo-oss i | xorg-x11-driver-input | package | 7.6_1-13.1 | noarch | repo-oss i | xorg-x11-driver-video | package | 7.6_1-15.1 | x86_64 | repo-oss i | xorg-x11-essentials | package | 7.6_1-16.1 | noarch | repo-oss i | xorg-x11-fonts | package | 7.6-31.2 | noarch | repo-oss i | xorg-x11-fonts-core | package | 7.6-31.2 | noarch | repo-oss i | xorg-x11-libX11-ccache | package | 7.6-20.1 | noarch | repo-oss i | xorg-x11-server | package | 7.6_1.17.1-8.1 | x86_64 | repo-oss i | xorg-x11-server-debuginfo | package | 7.6_1.17.1-8.1 | x86_64 | repo-debug i | xorg-x11-server-debugsource | package | 7.6_1.17.1-8.1 | x86_64 | repo-debug i | xorg-x11-server-extra | package | 7.6_1.17.1-8.1 | x86_64 | repo-oss i | xorg-x11-util-devel | package | 7.6_1-10.1 | noarch | repo-oss -- You are receiving this mail because: You are on the CC list for the bug.

1 8

[Bug 1006200] New: Weird (misleading?) package download message during install
by bugzilla_noreply＠novell.com 05 May '19

05 May '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1006200 Bug ID: 1006200 Summary: Weird (misleading?) package download message during install Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: nwr10cst-oslnx(a)yahoo.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:49.0) Gecko/20100101 Firefox/49.0 Build Identifier: I'm reporting this, as requested in http://lists.opensuse.org/opensuse-factory/2016-10/msg00514.html Install used the DVD installer (for RC1). I did not add any online repos. There was an ethernet connection during the install. The install went about as expected. All packages seemed to be installed. Then the installer was presumably running post-install scripts, so there was a period of no screen activity (the disk was busy). At this stage, the progress bar (upper of the two progress bars) listed "kaddressbook5", which was presumably the last package that was installed. After that, I saw messages about running "yudit" (if I recall correctly). And then the upper progress bar gave details of downloading "kaddressbook5". This was evidently a network download, because it gave speeds typical of network downloads. Shortly after that, there was a message about network configuration. My best guess is that the "kaddressbook5" was bogus, perhaps a left-over string from install. In previous installs (Tumbleweed or 42.1 or 13.2) I would have expected a message about downloading release-notes to test the network. I'm guessing that was what was really happening, but the message was incorrectly listing "kaddressbook5". Apart from that, the install went well. Note that I have done three installs of 42.2 RC1 (on 3 different computers). And this happened for all three installs. I'm pretty sure that it also happened for Beta3, though I was not looking as carefully at that time. I'll attach Yast logs after completing this report. The email list ask for a list of software that I installed. I didn't write it down. So this is from memory and might be incomplete: Desktop selection: KDE Also selected Gnome (both patterns), XFCE (both patterns), base development pattern, yakuake, epiphany, kernel-devel, dd_rescue, aria2c, fvwm2, dar, lynx, links, mc, mutt, whois and probably a few others. Reproducible: Always -- You are receiving this mail because: You are on the CC list for the bug.

1 12

[Bug 848783] New: glibc / known bug: "options rotate" in /etc/resolv.conf causes DNS name reolution FAIL with IPv6 resolver addresses; patch available
by bugzilla_noreply＠novell.com 01 May '19

01 May '19

https://bugzilla.novell.com/show_bug.cgi?id=848783 https://bugzilla.novell.com/show_bug.cgi?id=848783#c0 Summary: glibc / known bug: "options rotate" in /etc/resolv.conf causes DNS name reolution FAIL with IPv6 resolver addresses; patch available Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: All OS/Version: openSUSE 12.3 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: darx+opensuse(a)sent.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 on uname -a Linux darxdev.int 3.7.10-1.16-xen #1 SMP Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64 x86_64 x86_64 GNU/Linux with rpm -qa | grep -i glibc | sort glibc-2.17-4.7.1.x86_64 glibc-32bit-2.17-4.7.1.x86_64 glibc-debuginfo-2.17-4.7.1.x86_64 glibc-devel-2.17-4.7.1.x86_64 glibc-devel-static-2.17-4.7.1.x86_64 glibc-extra-2.17-4.7.1.x86_64 glibc-i18ndata-2.17-4.7.1.noarch glibc-info-2.17-4.7.1.noarch glibc-locale-2.17-4.7.1.x86_64 glibc-utils-2.17-4.7.1.x86_64 linux-glibc-devel-3.7.1-2.1.3.noarch with either IPv4 resolvers cat /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 or IPv6 resolvers cat /etc/resolv.conf nameserver 2001:4860:4860::8888 nameserver 2001:4860:4860::8844 'svn co' works as expected; in both cases: S="www.nlnetlabs.nl" T="svn/nsd/tags/NSD_4_0_0_REL/tpkg/manual" svn co http://$S/$T test ... Checked out revision 4089. next, adding "options rotate" to resolv.conf, with IPv4 rolvers, cat /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 options rotate 'svn co' still works, svn co http://$S/$T test ... Checked out revision 4089. but with IPv6, FAILS cat /etc/resolv.conf nameserver 2001:4860:4860::8888 nameserver 2001:4860:4860::8844 options rotate svn co http://$S/$T test ... svn: E670002: Unable to connect to a repository at URL 'http://www.nlnetlabs.nl/svn/nsd/tags/NSD_4_0_0_REL/tpkg/manual' svn: E670002: Name or service not known note, using numeric IP for SVN still works, svn co http://[2001:7b8:206:1::1]/$T test ... Checked out revision 4089. this appears to be due to a glibc bug, https://bugzilla.redhat.com/show_bug.cgi?id=841787 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=627531 https://bugzilla.redhat.com/show_bug.cgi?id=804630 https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/915272 1st link has a patch, but for an different version of glibc, and on redhat Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 30

[Bug 864716] New: AUDIT-0: libKF5Auth4.x86_64: W: suse-dbus-unauthorized-service /etc/dbus-1/system.d/org.kde.kf5auth.conf
by bugzilla_noreply＠novell.com 01 May '19

01 May '19

https://bugzilla.novell.com/show_bug.cgi?id=864716 https://bugzilla.novell.com/show_bug.cgi?id=864716#c0 Summary: AUDIT-0: libKF5Auth4.x86_64: W: suse-dbus-unauthorized-service /etc/dbus-1/system.d/org.kde.kf5auth.conf Classification: openSUSE Product: openSUSE Factory Version: 13.2 Milestone 0 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Security AssignedTo: security-team(a)suse.de ReportedBy: hrvoje.senjan(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.91 Safari/537.36 SUSE/33.0.1750.91 Source can be found at KDE:Frameworks5/kauth. As with kinit package, code is just ported to Qt5/KF5. org.kde.kf5auth.conf was renamed from org.kde.auth.conf so it can be co-installed with kdelibs4 package(s) Thus - asking for whitelist =) Thanks! Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 83

[Bug 802278] New: Update to OpenStack 2012.2.3 (including security fixes)
by bugzilla_noreply＠novell.com 01 May '19

01 May '19

https://bugzilla.novell.com/show_bug.cgi?id=802278 https://bugzilla.novell.com/show_bug.cgi?id=802278#c0 Summary: Update to OpenStack 2012.2.3 (including security fixes) Classification: openSUSE Product: openSUSE 12.3 Version: RC 1 Platform: Other OS/Version: Other Status: NEEDINFO Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: vuntz(a)suse.com QAContact: qa-bugs(a)suse.de InfoProvider: maintenance(a)opensuse.org Found By: --- Blocker: --- I'd like to update the following packages in 12.3: openstack-cinder, openstack-dashboard, openstack-glance, openstack-keystone, openstack-nova, openstack-quantum, openstack-swift. This is an update to the 2012.2.3 release which only contains bug fixes, as well as three security fixes (in nova, glance and keystone): https://lists.launchpad.net/openstack/msg20515.html https://lists.launchpad.net/openstack/msg20517.html https://lists.launchpad.net/openstack/msg20689.html (note that the packages have a 2012.2.4+git version; that's because we package from git, which is now tracking 2012.2.4) At the same time, we should update openstack-quickstart (to make it work in 12.3) and python-django_openstack_auth (contains compatibility fixes for 12.3). Here are links to the diffs: https://build.opensuse.org/package/rdiff?opackage=openstack-cinder&oproject… https://build.opensuse.org/package/rdiff?opackage=openstack-dashboard&oproj… https://build.opensuse.org/package/rdiff?opackage=openstack-glance&oproject… https://build.opensuse.org/package/rdiff?opackage=openstack-keystone&oproje… https://build.opensuse.org/package/rdiff?opackage=openstack-nova&oproject=o… https://build.opensuse.org/package/rdiff?opackage=openstack-quantum&oprojec… https://build.opensuse.org/package/rdiff?opackage=openstack-swift&oproject=… https://build.opensuse.org/package/rdiff?opackage=openstack-quickstart&opro… https://build.opensuse.org/package/rdiff?opackage=python-django_openstack_a… -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 785121] New: network/bind: VUL-0: CVE-2012-5166: bind: Specially crafted RDATA causes bind to stop working
by bugzilla_noreply＠novell.com 01 May '19

01 May '19

https://bugzilla.novell.com/show_bug.cgi?id=785121 https://bugzilla.novell.com/show_bug.cgi?id=785121#c0 Summary: network/bind: VUL-0: CVE-2012-5166: bind: Specially crafted RDATA causes bind to stop working Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other URL: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012 -5166 OS/Version: Other Status: NEW Keywords: security_vulnerability Severity: Critical Priority: P5 - None Component: 3rd party software AssignedTo: ug(a)suse.com ReportedBy: bernhard.schmidt(a)lrz-muenchen.de QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- A nameserver can be locked up if it can be induced to load a specially crafted combination of resource records. CVE: CVE-2012-5166 Document Version: 2.0 Posting date: 9 October 2012 Program Impacted: BIND Versions affected: 9.2.x -> 9.6.x, 9.4-ESV->9.4-ESV-R5-P1, 9.6-ESV->9.6-ESV-R7-P3, 9.7.0->9.7.6-P3, 9.8.0->9.8.3-P3, 9.9.0->9.9.1-P3 Severity: Critical Exploitable: Remotely Please update to 9.9.1-P4 There is already #784602 for SuSE shipped packages (also not yet fixed) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 757783] New: clone() with CLONE_NEWPID leaks kernel memory
by bugzilla_noreply＠novell.com 01 May '19

01 May '19

https://bugzilla.novell.com/show_bug.cgi?id=757783 https://bugzilla.novell.com/show_bug.cgi?id=757783#c0 Summary: clone() with CLONE_NEWPID leaks kernel memory Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.1 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: ccrssaa(a)karelia.ru QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:11.0) Gecko/20120312 Firefox/11.0 SeaMonkey/2.8 Server with vsftpd running started to die in agony with kswapd eating 100% cpu after upgrading to openSUSE 12.1. Turned out that vsftpd isolates each process using CLONE_NEWPID and 3.1.9-1.4 kernel does not free pid_namespace slabs. Reproducible: Always Steps to Reproduce: 1. test.c: #include <stdio.h> #include <errno.h> #include <signal.h> #include <sched.h> #include <linux/sched.h> #include <unistd.h> #include <sys/syscall.h> int main(int argc, char *argv[]) { int i, ret; for (i = 0; i < 10000; i++) { if (0 == (ret = syscall(__NR_clone, CLONE_NEWPID | CLONE_NEWIPC | CLONE_NEWNET | SIGCHLD, NULL))) return 0; if (-1 == ret) { perror("clone"); break; } } return 0; } simulates vsftpd sysdeputil.c 2. gcc -Wall test.c 3. run ./a.out as root Actual Results: # cat /proc/slabinfo | grep namespace pid_namespace 0 0 2112 3 2 : tunables 24 12 8 : slabdata 0 0 0 user_namespace 0 0 1072 7 2 : tunables 24 12 8 : slabdata 0 0 0 net_namespace 0 0 2560 3 2 : tunables 24 12 8 : slabdata 0 0 0 # ./a.out # sleep 60 # cat /proc/slabinfo | grep namespace pid_namespace 10000 10002 2112 3 2 : tunables 24 12 8 : slabdata 3334 3334 0 user_namespace 0 0 1072 7 2 : tunables 24 12 8 : slabdata 0 0 0 net_namespace 0 0 2560 3 2 : tunables 24 12 8 : slabdata 0 0 0 net_namespace slabs are freed but pid_namespace stays forever. Expected Results: # ./a.out # sleep 60 # cat /proc/slabinfo | grep namespace pid_namespace 0 0 2112 3 2 : tunables 24 12 8 : slabdata 0 0 0 net_namespace 0 0 2944 2 2 : tunables 24 12 8 : slabdata 0 0 0 TWIMC: switched from vsftpd to proftpd as a workaround. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 57

[Bug 715172] New: Review request for connman DBUS and polkit service files
by bugzilla_noreply＠novell.com 01 May '19

01 May '19

https://bugzilla.novell.com/show_bug.cgi?id=715172 https://bugzilla.novell.com/show_bug.cgi?id=715172#c0 Summary: Review request for connman DBUS and polkit service files Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: security-team(a)suse.de ReportedBy: mvyskocil(a)suse.com QAContact: qa(a)suse.de CC: vbotka(a)suse.com Found By: --- Blocker: --- I would like to push Connection Manager (connman) to openSUSE Factory. It's the alternative of NetworkManager written by Intel for Moblin. It installs two DBUS service files and one for polkit /etc/dbus-1/system.d/connman.conf /etc/dbus-1/system.d/connman-nmcompat.conf /usr/share/polkit-1/actions/net.connman.policy Package is in home:mvyskocil:connman connman https://build.opensuse.org/package/show?package=connman&project=home%3Amvys… -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 1026807] New: TLS: Unsupported Phase2 EAP method 'mschapv2'
by bugzilla_noreply＠novell.com 27 Apr '19

27 Apr '19

http://bugzilla.suse.com/show_bug.cgi?id=1026807 Bug ID: 1026807 Summary: TLS: Unsupported Phase2 EAP method 'mschapv2' Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: nadvornik(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 715406 --> http://bugzilla.suse.com/attachment.cgi?id=715406&action=edit /etc/sysconfig/network/ifcfg-wlan0 I have wifi configured using wicked and legacy configuration in /etc/sysconfig/network/ifcfg-wlan0. I have updated to current tumbleweed after several months and this configuration stopped working. I got this error in /var/log/wpa_supplicant.log: wlan0: Associated with 84:d4:7e:e0:78:10 wlan0: CTRL-EVENT-EAP-STARTED EAP authentication started wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 TLS: Unsupported Phase2 EAP method 'mschapv2' wlan0: EAP: Failed to initialize EAP method: vendor 0 method 25 (PEAP) wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13 EAP-TLS: Private key not configured wlan0: EAP: Failed to initialize EAP method: vendor 0 method 13 (TLS) After downgrade to wpa_supplicant-2.5 it works again. -- You are receiving this mail because: You are on the CC list for the bug.

1 25

[Bug 1014827] New: KATE - standard user as root - Find tools - Icons icons exists but no visible picture
by bugzilla_noreply＠novell.com 25 Apr '19

25 Apr '19

http://bugzilla.opensuse.org/show_bug.cgi?id=1014827 Bug ID: 1014827 Summary: KATE - standard user as root - Find tools - Icons icons exists but no visible picture Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.2 Hardware: x86-64 OS: openSUSE 42.2 Status: NEW Severity: Normal Priority: P5 - None Component: KDE Applications Assignee: opensuse-kde-bugs(a)opensuse.org Reporter: jcdole(a)free.fr QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 705881 --> http://bugzilla.opensuse.org/attachment.cgi?id=705881&action=edit Kate screenshot Please look at the attachment. Left part is kate opened from dolphin in super user mode. At the bottom, the buttons next, previous, Match case sensitive, power search, exists but are not visible. You have to pass over them to see them. In any case there is no picture visible. Right part is kate opened directly by normal user. -- You are receiving this mail because: You are on the CC list for the bug.

1 3