July 2016 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 958483] New: 3rd party application UI is not behaving as required
by bugzilla_noreply＠novell.com 21 Sep '22

21 Sep '22

http://bugzilla.suse.com/show_bug.cgi?id=958483 Bug ID: 958483 Summary: 3rd party application UI is not behaving as required Classification: openSUSE Product: openSUSE Tumbleweed Version: 2015* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: tchvatal(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- When using 3rd party module (like Virtualization) that tries to install additional packages it at this moment works like this when you are in X environment: For each package there is pop-up showing progress and then this pop-up is closed. This causes severe issue if user runs compoziting enabled environment. Imagine it like disco-bulb turning on and off as only on-top window is supposed to be rendered right and all the underlying windows are greyed out. More apps you install the more "funky" blinking you get. Prefferable solution would be to somehow include the yast2 sw_single interface that has the bottom progressbar and prints the installed packages. Added value would be mostly for openSUSE, where the default DE's have enabled compositing, but also for SLE case it would get at minimal prettier and at best more understandable about what is happening for the installed packages. For openSUSE it is quite commonly reported issue as I closed 3-4 during the bugzilla cleanup mentioning this problem. -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 966042] New: yast command-line usage emits "unable to close filehandle properly" warning at exit
by bugzilla_noreply＠novell.com 09 Sep '22

09 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=966042 Bug ID: 966042 Summary: yast command-line usage emits "unable to close filehandle properly" warning at exit Classification: openSUSE Product: openSUSE Tumbleweed Version: 2015* Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: bk(a)ancilla.ca QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Specifically, it says: Warning: unable to close filehandle properly: Bad file descriptor, <STDIN> line 21 during global destruction (#1) (S io) An error occurred when Perl implicitly closed a filehandle. This usually indicates your file system ran out of disk space. This happens with (as far as I can tell, I haven't tested exhaustively) all command-line yast invokations that involve a module. So, e.g., "yast users help" or "yast sysconfig help" will produce this message. "yast help" on its own, however, won't. It does not appear to affect yast's exit code, or it's ability to do its job; if I run "yast sysconfig set LOADER_TYPE=none", it does the right thing and then produces that message while exiting. Despite the hint that it may be space-related, this happens on multiple computers, all of them with plenty of space available on all filesystems. These systems are all running recent (~2 weeks) versions of Tumbleweed. -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 952799] New: bogofilter-{db,sqlite3} insists on using wordlist.tc
by bugzilla_noreply＠novell.com 06 Sep '22

06 Sep '22

http://bugzilla.opensuse.org/show_bug.cgi?id=952799 Bug ID: 952799 Summary: bogofilter-{db,sqlite3} insists on using wordlist.tc Classification: openSUSE Product: openSUSE Tumbleweed Version: 2015* Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: gour(a)atmarama.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- In the past, when using other Linux distros I was mostly using bogofilter with sqlite3 back-end, but after switching to openSUSE I've decided to convert to 'default' (Berkeley) DB backend. Unfortunately, after bogofilter package was updated in openSUSE, it looks it does insist on using $HOME/.bogofilter/wordlist.tc for the database name even if one uses Berkeley DB or Sqlite3 back-ends? When I try to use my old wordlist.db, Bogofilter plugin (Claws & Evolution) starts from the scratch and creates wordlist.tc. I wonder about this line in *.spec: %if 0%{?suse_version} > 1320 iow. whether the new Bogofilter package is ready to use existing setup with appropriate back-end (not equal to TokyoCabinet)? -- You are receiving this mail because: You are on the CC list for the bug.

2 9

[Bug 907495] New: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed)
by bugzilla_noreply＠novell.com 26 Aug '22

26 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=907495 Bug ID: 907495 Summary: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed) Classification: openSUSE Product: openSUSE 12.3 Version: Final Hardware: Other OS: openSUSE 13.2 Status: NEW Severity: Major Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: hpj(a)urpla.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When adding a manual route to a dhcp configured eth interface managed by wicked, the dhcp setup fails with a silly message: device enp7s0 failed: "call to org.opensuse.Network.Addrconf.ipv4.static.requestLease failed: General failure" Add a manual route to a dhcp configured interface and restart your system. Be prepared, that this interface will not come up correctly. BTW: the routing editor allows selecting configured interfaces only. The usual order is: setup interface, add route, but you have to confirm the interface setup first, reenter yast network and add the interface based route there after. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 938955] New: Desktop selection overridden when installing without recommended packages.
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=938955 Bug ID: 938955 Summary: Desktop selection overridden when installing without recommended packages. Classification: openSUSE Product: openSUSE Factory Version: 201505* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation Assignee: yast2-maintainers(a)suse.de Reporter: cwh(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Chosing not to install recommnded packages leads to a minimal installation even without xorg and desktop environment although a desktop environment has been selected before. Either the patterns have to be fixed or the no-recommends option should only be allowed for the minimal pattern. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 948370] New: One-Click-Installer YMP file cannot match group section for Tumbleweed
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=948370 Bug ID: 948370 Summary: One-Click-Installer YMP file cannot match group section for Tumbleweed Classification: openSUSE Product: openSUSE Factory Version: 2015* Hardware: Other OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: tgoettlicher(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:39.0) Gecko/20100101 Firefox/39.0 Build Identifier: One-Click-Installer YMP files can contain sections for different distribution versions, e.g.: <group distversion="openSUSE 13.2"> You can match against a specific Tumbleweed build: <group distversion="openSUSE 20150924"> But it's not possible to match for Tumbleweed in general because the version of Tumbleweed changes with every build. Can the one-click-installer be extended to not only match against the version but also against the codename? For example: <group distcodename="openSUSE Tumbleweed"> Reproducible: Always -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 930110] New: yast ncurses menus not properly formatted for tumbleweed ppc64 guest install
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=930110 Bug ID: 930110 Summary: yast ncurses menus not properly formatted for tumbleweed ppc64 guest install Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: PowerPC-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: normand(a)linux.vnet.ibm.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- yast ncurses menus not properly formatted for tumbleweed ppc64 guest install Detailed flow: * On a Power KVM host I defined a libvirt twppc64.xml using the Tumbleweed-BE-DVD-ppc64-Snapshot20150505-Media.iso retrieved from https://openqa.opensuse.org/tests/60778/asset/3110 * from a ssh session to the PowerKVM I started a screen window from which I started the ppc64 guest. === virsh define twppc64.xml virsh start --console twppc64 === * I captured successively the ncurses menus and did a yast2_ncurse_bad_format.tgz tarball with all those png files. * The first problem is that the text is not properly aligned eg: yast2_img1_installation.png * The 2nd problem is that some characters from previous menu are not cleaned up when new menu is presented. eg: yast2_img4_installation_option.png * The third problem is popup window hardly visible eg: yast2_img9_confirm_password.png -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 980750] New: Plymouth prevents loading DRM/KMS driver for newly installed graphics card
by bugzilla_noreply＠novell.com 22 Aug '22

22 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=980750 Bug ID: 980750 Summary: Plymouth prevents loading DRM/KMS driver for newly installed graphics card Classification: openSUSE Product: openSUSE Distribution Version: Leap 42.1 Hardware: All OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: maximilian.staudt(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When changing a VGA card in an already installed system, Plymouth will prevent its modern (DRM/KMS) kernel mode driver to be loaded. Example: 1. Install Leap 42.1 in QEMU using the emulated Cirrus card (-vga cirrus). 2. The system boots up with a splash screen. 3. Shut down the system. 4. Start the VM, this time with the Bochs VGA card (-vga std). 5. A splash screen will be shown, but then X falls back to the VESA driver. As a bonus, switching to a text VT (Ctrl-Alt-F1) only gives a blinking cursor. The VT works just fine and is usable, except the user has to operate it blindly as no video is shown. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 925275] New: NVIDIA Driver not installable
by bugzilla_noreply＠novell.com 15 Jun '22

15 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=925275 Bug ID: 925275 Summary: NVIDIA Driver not installable Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: fbernasek(a)netscape.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 629479 --> http://bugzilla.opensuse.org/attachment.cgi?id=629479&action=edit nvidia driver install log install opensuse tumbleweed 20150329 no problems. after reboot i like to install the NVIDIA-346.47 or 349.12 with booth the same problem can't install the driver. now i update with the kernel from the kernel:stable repositories the same problem. 20150328 the same problem -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 899330] New: Interfaces does not automatically show up in firewall with NetworkManager
by bugzilla_noreply＠novell.com 05 Jun '22

05 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=899330 Bug ID: 899330 Summary: Interfaces does not automatically show up in firewall with NetworkManager Classification: openSUSE Product: openSUSE Factory Version: 201408* Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: razirazo_90(a)live.com.my QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When using NetworkManager, network interfaces does not listed in firewall. I have to manually configure it using Wicked Service first, to make it registered in firewall. And then use networkManager back. This is troublesome, for example when setting up internet sharing you can't proceed to zone assign and Network masquerade until you do the step above. -- You are receiving this mail because: You are on the CC list for the bug.

2 10