May 2015 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 920901] New: USB mouse disconnects every 60 seconds without X
by bugzilla_noreply＠novell.com 11 Oct '22

11 Oct '22

http://bugzilla.suse.com/show_bug.cgi?id=920901 Bug ID: 920901 Summary: USB mouse disconnects every 60 seconds without X Classification: openSUSE Product: openSUSE 13.1 Version: Final Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: oneukum(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Some mice need X to run or will disconnects and reconnect every 60 seconds. The fix is a new quirk to always poll. -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 907495] New: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed)
by bugzilla_noreply＠novell.com 26 Aug '22

26 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=907495 Bug ID: 907495 Summary: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed) Classification: openSUSE Product: openSUSE 12.3 Version: Final Hardware: Other OS: openSUSE 13.2 Status: NEW Severity: Major Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: hpj(a)urpla.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When adding a manual route to a dhcp configured eth interface managed by wicked, the dhcp setup fails with a silly message: device enp7s0 failed: "call to org.opensuse.Network.Addrconf.ipv4.static.requestLease failed: General failure" Add a manual route to a dhcp configured interface and restart your system. Be prepared, that this interface will not come up correctly. BTW: the routing editor allows selecting configured interfaces only. The usual order is: setup interface, add route, but you have to confirm the interface setup first, reenter yast network and add the interface based route there after. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 930110] New: yast ncurses menus not properly formatted for tumbleweed ppc64 guest install
by bugzilla_noreply＠novell.com 23 Aug '22

23 Aug '22

http://bugzilla.suse.com/show_bug.cgi?id=930110 Bug ID: 930110 Summary: yast ncurses menus not properly formatted for tumbleweed ppc64 guest install Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: PowerPC-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: normand(a)linux.vnet.ibm.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- yast ncurses menus not properly formatted for tumbleweed ppc64 guest install Detailed flow: * On a Power KVM host I defined a libvirt twppc64.xml using the Tumbleweed-BE-DVD-ppc64-Snapshot20150505-Media.iso retrieved from https://openqa.opensuse.org/tests/60778/asset/3110 * from a ssh session to the PowerKVM I started a screen window from which I started the ppc64 guest. === virsh define twppc64.xml virsh start --console twppc64 === * I captured successively the ncurses menus and did a yast2_ncurse_bad_format.tgz tarball with all those png files. * The first problem is that the text is not properly aligned eg: yast2_img1_installation.png * The 2nd problem is that some characters from previous menu are not cleaned up when new menu is presented. eg: yast2_img4_installation_option.png * The third problem is popup window hardly visible eg: yast2_img9_confirm_password.png -- You are receiving this mail because: You are on the CC list for the bug.

2 8

[Bug 925275] New: NVIDIA Driver not installable
by bugzilla_noreply＠novell.com 15 Jun '22

15 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=925275 Bug ID: 925275 Summary: NVIDIA Driver not installable Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: x86-64 OS: SUSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: fbernasek(a)netscape.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 629479 --> http://bugzilla.opensuse.org/attachment.cgi?id=629479&action=edit nvidia driver install log install opensuse tumbleweed 20150329 no problems. after reboot i like to install the NVIDIA-346.47 or 349.12 with booth the same problem can't install the driver. now i update with the kernel from the kernel:stable repositories the same problem. 20150328 the same problem -- You are receiving this mail because: You are on the CC list for the bug.

2 3

[Bug 899330] New: Interfaces does not automatically show up in firewall with NetworkManager
by bugzilla_noreply＠novell.com 05 Jun '22

05 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=899330 Bug ID: 899330 Summary: Interfaces does not automatically show up in firewall with NetworkManager Classification: openSUSE Product: openSUSE Factory Version: 201408* Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: razirazo_90(a)live.com.my QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When using NetworkManager, network interfaces does not listed in firewall. I have to manually configure it using Wicked Service first, to make it registered in firewall. And then use networkManager back. This is troublesome, for example when setting up internet sharing you can't proceed to zone assign and Network masquerade until you do the step above. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 931978] New: VUL-0: CVE-2014-9721: zeromq: protocol downgrade attack on sockets using the ZMTP v3 protocol
by bugzilla_noreply＠novell.com 07 Apr '22

07 Apr '22

http://bugzilla.suse.com/show_bug.cgi?id=931978 Bug ID: 931978 Summary: VUL-0: CVE-2014-9721: zeromq: protocol downgrade attack on sockets using the ZMTP v3 protocol Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: Other OS: Other Status: NEW Severity: Major Priority: P5 - None Component: Security Assignee: tchvatal(a)suse.com Reporter: abergmann(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: Security Response Team Blocker: --- rh#1221666 ------------------------------------- It was discovered that zeromq, a lightweight messaging kernel, is susceptible to a protocol downgrade attack on sockets using the ZMTP v3 protocol. This could allow remote attackers to bypass ZMTP v3 security mechanisms by sending ZMTP v2 or earlier headers. CVE request: http://openwall.com/lists/oss-security/2015/05/07/8 Upstream bug report: https://github.com/zeromq/libzmq/issues/1273 Upstream fix: https://github.com/zeromq/zeromq4-x/commit/b6e3e0f601e2c1ec1f3aac880ed6a3fe… ------------------------------------- References: https://bugzilla.redhat.com/show_bug.cgi?id=1221666 http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-9721 http://seclists.org/oss-sec/2015/q2/515 http://people.canonical.com/~ubuntu-security/cve/2014/CVE-2014-9721.html -- You are receiving this mail because: You are on the CC list for the bug.

2 12

[Bug 924591] New: Apache2 doesn't start with faulty config, prob from yast
by bugzilla_noreply＠novell.com 14 Mar '22

14 Mar '22

http://bugzilla.opensuse.org/show_bug.cgi?id=924591 Bug ID: 924591 Summary: Apache2 doesn't start with faulty config, prob from yast Classification: openSUSE Product: openSUSE Factory Version: 201503* Hardware: armv7 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: volker3204(a)paradise.net.nz QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Running yast http-server module, making basically no changes to get basic config. No vhosts, ssl, etc. Btw a server name can't be entered, the value is going to /dev/null. Starting apache gives: Mar 27 14:37:35 cubie start_apache2[9361]: Module "authz_default" is not installed, ignoring. Mar 27 14:37:35 cubie start_apache2[9361]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. Mar 27 14:37:35 cubie start_apache2[9361]: AH00526: Syntax error on line 10 of /etc/apache2/mod_status.conf: Mar 27 14:37:35 cubie start_apache2[9361]: Invalid command 'Require', perhaps misspelled or defined by a module not included in the server configuration Mar 27 14:37:36 cubie start_apache2[9378]: Module "authz_default" is not installed, ignoring. Mar 27 14:37:36 cubie start_apache2[9378]: Check the APACHE_MODULES setting in /etc/sysconfig/apache2. Mar 27 14:37:36 cubie start_apache2[9378]: AH00526: Syntax error on line 10 of /etc/apache2/mod_status.conf: Mar 27 14:37:36 cubie start_apache2[9378]: Invalid command 'Require', perhaps misspelled or defined by a module not included in the server configuration Mar 27 14:37:36 cubie systemd[1]: Failed to start The Apache Webserver. In the yast http-server server-modules tab authz_default is listed with a description of "unknown", i.e. none. The module does not exist on disk! Editing /etc/sysconfig/apache2 adding authz_core to APACHE_MODULES makes authz_core also be shown with a description of "unknown". systemctl restart apache2 is now successful. This bnc:835484#6 basically says yast http-server module is foobared, so it's probably best to uninstall it. -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 918705] New: alpine locking failure (against procmail) leads to mail corruption
by bugzilla_noreply＠novell.com 11 Mar '22

11 Mar '22

http://bugzilla.suse.com/show_bug.cgi?id=918705 Bug ID: 918705 Summary: alpine locking failure (against procmail) leads to mail corruption Classification: openSUSE Product: openSUSE Factory Version: 201502* Hardware: x86-64 OS: Other Status: NEW Severity: Critical Priority: P5 - None Component: Other Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: gp(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- This is something I started to see a bit ago, and since it now happened twice today I figured I'd report it. When I obtain mail via fetchmail, using procmail as the delivery agent, occasionally I get corrupted mails like the following (in mbox format): ==== snip ==== >From gp Thu Feb 19 18:56:54 2015 Mime-Version: 1.0 Date: Thu, 19 Feb 2015 18:56:00 +0100 Subject: AW: Re: Your help needed: Fwd: Comment opportunity: Software Status: RO X-Status: X-Keywords: X-UID: 9310 definedstorage Subject: AW: Re: Your help needed: Fwd: Comment opportunity: Software definedstorage References: <54E302D90200006F00158C8B(a)suse.com> <54E2D72A0200002B000A1B55(a)suse.com> <54E339FA0200006F00158DBD(a)suse.com> <54E2D7DE0200002B000A1B68(a)suse.com> <alpine.LSU.2.11.1502191739290.2252(a)ghan.fvgr> In-Reply-To: <alpine.LSU.2.11.1502191739290.2252(a)ghan.fvgr> Message-ID: <54E623B70200006F001594A6(a)suse.com> From: ... To: "Gerald Pfeifer" <gp(a)suse.com> ==== snap ==== This does not happen daily, and I believe it happens especially when I have been offline for several hours and a few dozen e-mails are delivered at once (though this specific case was not that). The same configuration had been working for years without ever showing this problem, and it looks like looking on the Alpine side (or procmail, though less likely I guess, since it essentially only reads :0 INBOX ) -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 906594] New: Apper showing wrong package description
by bugzilla_noreply＠novell.com 17 Feb '22

17 Feb '22

http://bugzilla.opensuse.org/show_bug.cgi?id=906594 Bug ID: 906594 Summary: Apper showing wrong package description Classification: openSUSE Product: openSUSE Factory Version: NO 13.2 BUGS!! Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications Assignee: kde-maintainers(a)suse.de Reporter: erwin.vandevelde(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Apper shows the package's description when clicking on it, but only for the first package you click on this is done correctly. Apper shows the same description again and again for each other package you click on. Versions: apper 0.9.1-2.1 -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 917759] New: osc fails with a python exception
by bugzilla_noreply＠novell.com 17 Feb '22

17 Feb '22

http://bugzilla.suse.com/show_bug.cgi?id=917759 Bug ID: 917759 Summary: osc fails with a python exception Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Major Priority: P5 - None Component: BuildService Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: lmb(a)suse.com QA Contact: adrian(a)suse.com Found By: --- Blocker: --- This is about the latest osc client on Factory (osc-0.150.1-158.1.noarch) used on the internal build service instance: # iosc rdiff Devel:Storage:1.0 _product SUSE:SLE-12:Update:Products:Cloud5 Traceback (most recent call last): File "/usr/bin/osc", line 26, in <module> r = babysitter.run(osccli) File "/usr/lib/python2.7/site-packages/osc/babysitter.py", line 61, in run return prg.main(argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 343, in main return self.cmd(args) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 366, in cmd retval = self.onecmd(argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 500, in onecmd return self._dispatch_cmd(handler, argv) File "/usr/lib/python2.7/site-packages/osc/cmdln.py", line 1230, in _dispatch_cmd return handler(argv[0], opts, *args) File "/usr/lib/python2.7/site-packages/osc/commandline.py", line 3593, in do_rdiff expand=not opts.unexpand) File "/usr/lib/python2.7/site-packages/osc/core.py", line 4488, in server_diff_noex unified, missingok, meta, expand) File "/usr/lib/python2.7/site-packages/osc/core.py", line 4477, in server_diff f = http_POST(u) File "/usr/lib/python2.7/site-packages/osc/core.py", line 3201, in http_POST def http_POST(*args, **kwargs): return http_request('POST', *args, **kwargs) File "/usr/lib/python2.7/site-packages/osc/core.py", line 3144, in http_request install_opener(conf._build_opener(url)) File "/usr/lib/python2.7/site-packages/osc/conf.py", line 507, in _build_opener from . import oscssl File "/usr/lib/python2.7/site-packages/osc/oscssl.py", line 8, in <module> import M2Crypto.httpslib File "/usr/lib64/python2.7/site-packages/M2Crypto/__init__.py", line 24, in <module> import ASN1 File "/usr/lib64/python2.7/site-packages/M2Crypto/ASN1.py", line 12, in <module> import BIO File "/usr/lib64/python2.7/site-packages/M2Crypto/BIO.py", line 221, in <module> class CipherStream(BIO): File "/usr/lib64/python2.7/site-packages/M2Crypto/BIO.py", line 227, in CipherStream SALT_LEN = m2.PKCS5_SALT_LEN AttributeError: 'module' object has no attribute 'PKCS5_SALT_LEN' Most invocations fail like that for me, including "osc up", submitreq, etc, making it completely unusable for me. -- You are receiving this mail because: You are on the CC list for the bug.

2 21