February 2015 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 916035] New: Wicked bug upgrade fails
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.opensuse.org/show_bug.cgi?id=916035 Bug ID: 916035 Summary: Wicked bug upgrade fails Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: x86-64 OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: suse-20050616(a)bgcomp.co.uk QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Installed wicked-0.6.15-8.1.x86_64 & wicked-service-0.6.15-8.1.x86_64 as part of a bug fix. This fails with the following entry in syslog: ==== 2015-02-02T21:35:44.000000+00:00 eth7 wickedd-nanny[13490]: <buffer>: line 1: End of document while processing element <address> 2015-02-02T21:35:44.000000+00:00 eth7 wickedd-nanny[13490]: Unable to parse policy document <policy name="policy__dummy0" origin="compat:/etc/sysconfig/network/ifcfg-dummy0" uuid="543acf54-416f-0e00-db12-000002000000"> <match> <link-type>dummy</link-type> <device>dummy0</device> </match> <merge> <name>dummy0</name> <control> <mode>boot</mode> <link-detection> <require-link/> </link-detection> </control> <dummy/> <link/> <ipv4> <enabled>true</enabled> <forwarding>true</forwarding> </ipv4> <ipv4:static> <address> <local>172.16.0.1/24</local> </address> </ipv4:static> <ipv6> <enabled>true</enabled> <forwarding>true</forwarding> </ipv6> </merge> </policy> <address> A === Everything between the "===" is logged, including the weird 'A' at the end. The contents of /etc/sysconfig/network/ifcfg-dummy0 is: === BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.16.0.1/24' MTU='' NAME='' NETMASK='255.255.255.0' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' === None of the /etc/sysconfig/network/ifcfg-* files appear to have been touched and I can only assume that the config files are in a broken state, although that does not mean the interfaces will not come up. This whole wickedd thing appears to have not been either designed, developed or tested properly given the HUGE amount of problems being seen with it. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 740742] RDNSS daemon missing from repositories
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.opensuse.org/show_bug.cgi?id=740742 James Knott <james.knott(a)rogers.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |james.knott(a)rogers.com --- Comment #7 from James Knott <james.knott(a)rogers.com> --- It also appears to be missing in 13.1. RDNSS and rdisc6 are important for supporting IPv6. Their absence is inexcusable. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 916027] New: build-compare: openmpi contains hostname
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.opensuse.org/show_bug.cgi?id=916027 Bug ID: 916027 Summary: build-compare: openmpi contains hostname Classification: openSUSE Product: openSUSE Factory Version: 201502* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other Assignee: jjolly(a)suse.com Reporter: coolo(a)suse.com QA Contact: qa-bugs(a)suse.de CC: ohering(a)suse.com, pth(a)suse.com Found By: --- Blocker: --- this makes the build not reproducible: [ 2156s] --- old//usr/lib64/mpi/gcc/openmpi/include/openmpi/opal_config.h 2015-02-03 14:26:03.000000000 +0000 [ 2156s] +++ new//usr/lib64/mpi/gcc/openmpi/include/openmpi/opal_config.h 2015-10-27 19:37:07.000000000 +0000 [ 2156s] @@ -2309,7 +2309,7 @@ [ 2156s] #define OPAL_NEED_C_BOOL 1 [ 2156s] [ 2156s] /* package/branding string for Open MPI */ [ 2156s] -#define OPAL_PACKAGE_STRING "Open MPI abuild@cloud126 Distribution" [ 2156s] +#define OPAL_PACKAGE_STRING "Open MPI abuild@NEWHOST Distribution" [ 2156s] [ 2156s] /* Whether r notation is used for ppc registers */ [ 2156s] /* #undef OPAL_POWERPC_R_REGISTERS */ There are other changes too, but they might be triggered by this change -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 915943] build-compare: perl-Alien-Tidyp contains randomness
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.novell.com/show_bug.cgi?id=915943 --- Comment #2 from Bernhard Wiedemann <bwiedemann(a)suse.com> --- This is an autogenerated message for OBS integration: This bug (915943) was mentioned in https://build.opensuse.org/request/show/283923 Factory / perl-Alien-Tidyp -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 914656] seccheck in security repo won't run
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.novell.com/show_bug.cgi?id=914656 --- Comment #2 from Bernhard Wiedemann <bwiedemann(a)suse.com> --- This is an autogenerated message for OBS integration: This bug (914656) was mentioned in https://build.opensuse.org/request/show/283927 Factory / seccheck -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 906142] New: OpenSUSE 13.2 cannot boot on RAID0 Array
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.opensuse.org/show_bug.cgi?id=906142 Bug ID: 906142 Summary: OpenSUSE 13.2 cannot boot on RAID0 Array Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: x86-64 OS: openSUSE 13.2 Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader Assignee: jsrain(a)suse.com Reporter: sersh1965(a)gmail.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- Created attachment 614218 --> http://bugzilla.opensuse.org/attachment.cgi?id=614218&action=edit File was created in emegency mode Hi I try install openSUSE 13.2 from DVD to server based on P8B-E/4L motherboard, PIKE 6480 SAS RAID card (Marvell 88SE63) with 2 SAS HDD with RAID0 array and 2 SATA HDD without RAID. Installation was on RAID0 array and run fine. But when system is rebooted I've got emegency mode with "dracut:/#" prompter and unable to run openSUSE. In this mode file rdsosreport.txt was created. I have attached this file. OpenSUSE 13.1 worked fine with this hardware. -- You are receiving this mail because: You are on the CC list for the bug.

1 3

[Bug 910987] New: In Suse13.2 dmraid can't boot after error free installation
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.opensuse.org/show_bug.cgi?id=910987 Bug ID: 910987 Summary: In Suse13.2 dmraid can't boot after error free installation Classification: openSUSE Product: openSUSE Distribution Version: 13.2 Hardware: x86-64 OS: openSUSE 13.2 Status: NEW Severity: Critical Priority: P5 - None Component: Bootloader Assignee: jsrain(a)suse.com Reporter: gert.ahrens(a)ahrenszedau.de QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- The error message on grub2 safeboot is "sdb unknown partition table. After much tryings a security command line appears. Typing "dmraid -ay" let the raid build up. After that I can mount the /dev/mapper/pdc_hicdhaddip1 and so on. I believe its an problem with udev or systemd. In every case, the driver is in the initrd! Only activating of dmraid isn't in function. Below a part of my boot log from a functional Suse 12.2. Starting udev Kernel Device Manager... Started Remount API VFS [[1;32m OK [0m] Started LSB: Set default boot entry if called [[1;32m OK [0m] Started udev Kernel Device Manager [[1;32m OK [0m] Starting LSB: start dmraid... Started LSB: setup hostname and yp [[1;32m OK [0m] Started Remount Root FS [[1;32m OK [0m] Starting Load Random Seed... Started Load Random Seed [[1;32m OK [0m] (KStarted Load Kernel Modules [[1;32m OK [0m] Started FUSE Control File System [[1;32m OK [0m] Started Configuration File System [[1;32m OK [0m] Starting Apply Kernel Variables... Started Apply Kernel Variables [[1;32m OK [0m] Started Setup Virtual Console [[1;32m OK [0m] Starting udev Coldplug all Devices... Started udev Coldplug all Devices [[1;32m OK [0m] Started Show Plymouth Boot Screen [[1;32m OK [0m] Started LSB: start dmraid [[1;32m OK [0m] Starting File System Check on /dev/mapper/pdc_hicdhaddi_part2... Starting File System Check on /dev/mapper/pdc_hicdhaddi_part1... Starting File System Check on /dev/mapper/pdc_hicdhaddi_part5... Starting File System Check on /dev/disk/by-id/ata-Maxtor_6B...B40HT5EH-part6... Starting File System Check on /dev/disk/by-id/ata-Maxtor_6B...B40HT5EH-part1... systemd-fsck[522]: /dev/mapper/pdc_hicdhaddi_part5: sauber, 74134/8437760 Dateien, 14404027/33731872 Blöcke systemd-fsck[564]: /dev/sdc6: sauber, 6397/4620288 Dateien, 15493181/18466304 Blöcke systemd-fsck[514]: /dev/mapper/pdc_hicdhaddi_part1: sauber, 383/51200 Dateien, 43924/204800 Blöcke Started File System Check on /dev/mapper/pdc_hicdhaddi_part1 [[1;32m OK [0m] Started File System Check on /dev/mapper/pdc_hicdhaddi_part5 [[1;32m OK [0m] Starting /13.2/home... systemd-fsck[504]: /dev/mapper/pdc_hicdhaddi_part2: sauber, 151876/1310720 Dateien, 1319839/5242880 Blöcke Starting /13.2/boot... Starting File System Check on /dev/disk/by-id/ata-Maxtor_6B...B40HT5EH-part5... Started /13.2/home [[1;32m OK [0m] Started /13.2/boot [[1;32m OK [0m] Started File System Check on /dev/mapper/pdc_hicdhaddi_part2 [[1;32m OK [0m] Again in openSUSE 12.2 everything is ok but in 13.2 after a new installation every patition on the raid is created but can't be booted. I like to use my fakeraid and some other people also. Thanks for you support Gert -- You are receiving this mail because: You are on the CC list for the bug.

1 7

[Bug 910376] CVE-2014-3580: Apache Subversio
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.suse.com/show_bug.cgi?id=910376 Marcus Meissner <meissner(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution|--- |FIXED --- Comment #6 from Marcus Meissner <meissner(a)suse.com> --- released I think. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 914656] seccheck in security repo won't run
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.suse.com/show_bug.cgi?id=914656 Victor Pereira <vpereira(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |IN_PROGRESS --- Comment #1 from Victor Pereira <vpereira(a)novell.com> --- Hi, great! I did a submission with the fix. Strange that in upstream, it is fixed: https://github.com/vpereira/seccheck/blob/master/helper.inc#L91. -- You are receiving this mail because: You are on the CC list for the bug.

1 0

[Bug 915943] build-compare: perl-Alien-Tidyp contains randomness
by bugzilla_noreply＠novell.com 03 Feb '15

03 Feb '15

http://bugzilla.suse.com/show_bug.cgi?id=915943 Stephan Kulow <coolo(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #1 from Stephan Kulow <coolo(a)suse.com> --- fixed - the problem is basically in perl, but Module::Build will soon be removed from it anyway. -- You are receiving this mail because: You are on the CC list for the bug.

1 0