September 2014 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 877685] New: smartmontools can not read information from MegaRaid controller
by bugzilla_noreply＠novell.com 15 Mar '18

15 Mar '18

https://bugzilla.novell.com/show_bug.cgi?id=877685 https://bugzilla.novell.com/show_bug.cgi?id=877685#c0 Summary: smartmontools can not read information from MegaRaid controller Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: svalx(a)svalx.net QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:29.0) Gecko/20100101 Firefox/29.0 smartmontools-6.2-2.1.2.x86_64 I have a single MegaRaid 9240-8i controller with 8 disks on 2 RAID's. and want to get info about this disks. Reproducible: Always Steps to Reproduce: ---------- # smartctl -i /dev/sdd smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.14.3-26.g2a280a3-desktop] (SUSE RPM) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org Smartctl open device: /dev/sdd failed: DELL or MegaRaid controller, please try adding '-d megaraid,N' --------- # smartctl -i -d megaraid,0 /dev/sdd smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.14.3-26.g2a280a3-desktop] (SUSE RPM) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org Smartctl open device: /dev/sdd [megaraid_disk_00] failed: INQUIRY failed --------- $ man smartctl ... megaraid,N - [Linux only] the device consists of one or more SCSI/SAS disks connected to a MegaRAID controller. The non-negative integer N (in the range of 0 to 127 inclusive) denotes which disk on the controller is monitored. Use syntax such as: smartctl -a -d megaraid,2 /dev/sda smartctl -a -d megaraid,0 /dev/sdb smartctl -a -d megaraid,0 /dev/bus/0 The following entry in /proc/devices must exist: For PERC2/3/4 controllers: megadevN For PERC5/6 controllers: megaraid_sas_ioctlN ... --------- $ grep mega /proc/devices 250 megaraid_sas_ioctl --------- So I have megaraid_sas_ioctl instead megaraid_sas_ioctl0 and probably it case of failed inquiry. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 862739] New: openvpn creates non-functional client config
by bugzilla_noreply＠novell.com 26 Feb '18

26 Feb '18

https://bugzilla.novell.com/show_bug.cgi?id=862739 https://bugzilla.novell.com/show_bug.cgi?id=862739#c0 Summary: openvpn creates non-functional client config Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: per(a)computer.org QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686 on x86_64; rv:11.0) Gecko/20100101 Firefox/11.0 I have recently upgraded our local openvpn endpoint to 13.1, which also meant upgrading openvpn to 2.3.2 . I copied over our existing configuration and added "topology subnet". The new configuration no longer works, it seems to be handing out an invalid client config. Previous config that worked: 2013-07-30T17:02:44.084956+02:00 toshi1 openvpn[5616]: PUSH: Received control message: 'PUSH_REPLY,route 192.168.0.0 255.255.0.0,route 192.168.13.1,ping 10,ping-restart 120,ifconfig 192.168.13.9 192.168.13.10' Current config which doesn't work: 2014-02-07T09:56:14.797888+01:00 toshi1 openvpn[8133]: PUSH: Received control message: 'PUSH_REPLY,route 192.168.0.0 255.255.240.0,topology p2p,ping 10,ping-restart 120,ifconfig 255.255.255.0 192.168.13.10' The "ifconfig 255.255.255.0 192.168.13.10" part looks particularly dodgy and presumably leads to this faulty network config: 4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/none inet 255.255.255.0 peer 192.168.13.10/32 scope global tun0 valid_lft forever preferred_lft forever It is correctable by amending the addresses: ip addr add 192.168.13.9 peer 192.168.13.10 dev tun0 ip addr del 255.255.255.0/32 dev tun0 Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 819514] New: After update pushed 5/10/2013, network unavailable after resuming from sleep
by bugzilla_noreply＠novell.com 20 Feb '18

20 Feb '18

https://bugzilla.novell.com/show_bug.cgi?id=819514 https://bugzilla.novell.com/show_bug.cgi?id=819514#c0 Summary: After update pushed 5/10/2013, network unavailable after resuming from sleep Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: openSUSE 12.3 Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: tonysu(a)su-networking.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:20.0) Gecko/20100101 Firefox/20.0 First reported in this Forum thread http://forums.opensuse.org/english/get-technical-help-here/network-internet… For others in the thread, unknown whether recommendations were helpful. Note that others in the thread were not using Network Manager, whereas I am. For myself, my wireless networking was not functional (for that matter any networking) was functional resuming from sleep. Attempted to systemctl stop|start|restart network.service systemctl status network service returned Active with no errors after each above attempt. Service was verified stopped and restarted without errors. After rebooting, my network was still unavailable. Attampted again to stop|start|restart services. Then, I did a hardware NIC disable/re-enable which resulted in NM reporting networking enabled, but wireless "undetermined" (no check or unchecked box, a weird white box). Using NM, unchecked, re-checked "networking" and the wireless box was "normal, unchecked" Checked the box an wireless is working. After the wireless working was working again, I re-ran "systemctl status network.service" with the following results NetworkManager.service - Network Manager Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled) Active: active (running) since Sat 2013-05-11 14:35:15 PDT; 56s ago Main PID: 26829 (NetworkManager) CGroup: name=systemd:/system/NetworkManager.service └─26829 /usr/sbin/NetworkManager --no-daemon May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <warn> failed to allocate link cache: (-10) Operation not supported May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <info> (virbr2): ignoring bridge not created by NetworkManager May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <warn> /sys/devices/virtual/net/virbr2-nic: couldn't determine device driver; ignoring... May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <warn> failed to allocate link cache: (-10) Operation not supported May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <info> (virbr0): ignoring bridge not created by NetworkManager May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <warn> failed to allocate link cache: (-10) Operation not supported May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <info> (virbr2): ignoring bridge not created by NetworkManager May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <warn> /sys/devices/virtual/net/virbr2-nic: couldn't determine device driver; ignoring... May 11 14:35:15 LOCALMACHINE,LOCALNETWORK NetworkManager[26829]: <info> ModemManager available in the bus The above may not be helpful, I suspect that the errors only refer to a number of virtual device bridges I have configured on this machine, but of course NM does not support managing those. Reproducible: Always Steps to Reproduce: 1. zypper up 5/10/2013 2. Put machine to sleep 3. resume machine Actual Results: Networking unavailable. Expected Results: Network should re-connect to available networks automatically Assigning Major, but impact likely depends on whether the User is able to regain networking either by restarting the network service or re-booting. If there are critical programs which would be adversely affected by a re-boot, then the problem is very serious, maybe even critical. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 640407] New: SDL: erroneously uses xrandr-style mode switching
by bugzilla_noreply＠novell.com 09 Feb '18

09 Feb '18

https://bugzilla.novell.com/show_bug.cgi?id=640407 https://bugzilla.novell.com/show_bug.cgi?id=640407#c0 Summary: SDL: erroneously uses xrandr-style mode switching Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: jengelh(a)medozas.de QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: Beta-Customer Blocker: --- Starting with 11.3, I am seeing a new issue with my "oversize" desktop (2944x2208 VirtualSize on a 1280x1024 resolution). Problem: SDL-1.2.14. When SDL switches to fullscreen 640x480 - for example, because the game is configured to run in such resolution - or back, it changes the desktop size too by means of xrandr or something along the lines of that. Actual results: Windows on my desktop are reordered, which is usually a result of the WM being forced to do so because the desktop size (virtualsize) changed. Resolution switching also takes significantly longer than it did before — this is another sign that it switches desktop size (too), not just resolution. First the screen goes black-with-backlight and after roughly 500ms, the TFT screen finally gets the new 640x480 mode signal (I use VGA), which is evidenced by the backlight going briefly off. Expected results: Previous behavior. In other worsd, leave desktop size as-is (and subsequently keep my windows where they are) and _only_ change the resolution. The old switching style is also way faster in that there is no black-with-backlight delay. Additional information: Not all programs are affected. The entire group of Doom engines exhibits the behavior for example, though I found that UnrealTournament99 does not. Both Doom and UT use libSDL-1.2.so.0 (no static SDL as far as I can see). Overriding the system SDL 1.2.14 libraries and using LD_LIBRARY_PATH to point to SDL-1.2.13 libraries brings back the desired behavior. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 897422] New: systemd ignores swap options in fstab
by bugzilla_noreply＠novell.com 08 Jan '18

08 Jan '18

https://bugzilla.novell.com/show_bug.cgi?id=897422 https://bugzilla.novell.com/show_bug.cgi?id=897422#c0 Summary: systemd ignores swap options in fstab Classification: openSUSE Product: openSUSE Factory Version: 201409* Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: seife(a)novell.slipkontur.de QAContact: qa-bugs(a)suse.de Found By: Third Party Developer/Partner Blocker: --- Because I'm running on a SSD, I added the following to my fstab: susi:~ # grep swap /etc/fstab /dev/sda5 swap swap discard=once 0 0 This works well, if I do "swapon -a"; Sep 19 08:19:31 susi kernel: [583832.054201] Adding 2093052k swap on /dev/sda5. Priority:-1 extents:1 across:2093052k SSDsFS But during boot, it is not honored: susi:~ # dmesg|grep swap [ 8.339693] Adding 2093052k swap on /dev/sda5. Priority:-1 extents:1 across:2093052k SSFS (the missing "Ds" flags) Searching for who activates swap during boot, I looked through /var/log/boot.log: /var/log/boot.log: Activating swap /dev/sda5... /var/log/boot.log:[ OK ] Activated swap /dev/sda5. so I looked in the usual suspect for that string: susi:~ # rpm -ql systemd | xargs grep "Activating swap" 2>/dev/null Binary file /bin/systemd matches Binary file /usr/lib/systemd/systemd matches => systemd bug? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 736093] New: Logitech WebCam microphone produces squeaky "chipmunk" audio
by bugzilla_noreply＠novell.com 18 Dec '17

18 Dec '17

https://bugzilla.novell.com/show_bug.cgi?id=736093 https://bugzilla.novell.com/show_bug.cgi?id=736093#c0 Summary: Logitech WebCam microphone produces squeaky "chipmunk" audio Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: nils(a)ellmenreich.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:8.0) Gecko/20100101 Firefox/8.0 A regression in the linux kernel prevent some Logitech webcam microphones (notably C270, C300, C310) to be properly initialized. As a result, audio playback of recordings are way too fast, producing a "chipmunk" effect. Here is the patch: http://article.gmane.org/gmane.linux.usb.general/52027 Fedorea fixed this alread. References in: https://bugzilla.redhat.com/show_bug.cgi?id=729269 https://bugzilla.redhat.com/show_bug.cgi?id=742010 https://bugs.archlinux.org/task/26528 https://bugzilla.kernel.org/show_bug.cgi?id=35922 Reproducible: Always Steps to Reproduce: 1.Record audio using Logitech webcan (e.g. with skype test call) 2.listen 3. Actual Results: Chipmunk audio Expected Results: normal audio -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 509945] New: Enforce packaging of static libraries by rpmlint check
by bugzilla_noreply＠novell.com 09 Dec '17

09 Dec '17

http://bugzilla.novell.com/show_bug.cgi?id=509945 Summary: Enforce packaging of static libraries by rpmlint check Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: dmueller(a)novell.com ReportedBy: prusnak(a)novell.com QAContact: qa(a)suse.de CC: ro(a)novell.com, mrueckert(a)novell.com, crrodriguez(a)novell.com Found By: Development We are trying to adopt the static libraries packaging scheme described on http://en.opensuse.org/Packaging/Guidelines#Packaging_Static_Libraries By adding rpmlint check we will enforce the correct packaging. rpmlint should check whether the package contains *.{a,la} files and perform these steps: a) package contains *.la files, does not contain *.a files -> throw error suggesting the packager to remove *.la files in %install phase b) package contains only *.la and *.a files -> check if the name ends with "-devel-static", throw error otherwise, suggesting the rename c) package contains *.la, *.a files AND *.so files (and probably some includes) -> check if the name ends with "-devel" AND package also provides "-devel-static" symbol, throw error otherwise, suggesting the addition of symbol -> also point out that packager has to be sure that static libraries are absolutely needed in the system. If not the package should be built with --disable-static and *.la files removed in %install phase -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 884004] New: bzip2 -dcf skips the first block if fed uncompressed data
by bugzilla_noreply＠novell.com 09 Dec '17

09 Dec '17

https://bugzilla.novell.com/show_bug.cgi?id=884004 https://bugzilla.novell.com/show_bug.cgi?id=884004#c0 Summary: bzip2 -dcf skips the first block if fed uncompressed data Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jnweiger(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- $ echo hello world | bzip2 -dcf returns nothing. I'd expect to see 'hello world'. According to the manual, the effects of -f include: "bzip2 normally declines to decompress files which don't have the correct magic header bytes. If forced (-f), however, it will pass such files through unmodified. This is how GNU gzip behaves. strace includes: read(0, "hello world\n", 4096) = 12 read(0, "", 4096) = 0 lseek(0, 0, SEEK_SET) = -1 ESPIPE (Illegal seek) read(0, "", 4096) = 0 close(0) = 0 I assume, the failing lseek() should be acted on. Possibly already an upstream issue? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 709260] New: package bzip2 missing documentation
by bugzilla_noreply＠novell.com 09 Dec '17

09 Dec '17

https://bugzilla.novell.com/show_bug.cgi?id=709260 https://bugzilla.novell.com/show_bug.cgi?id=709260#c0 Summary: package bzip2 missing documentation Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: i686 OS/Version: openSUSE 11.4 Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: giecrilj(a)stegny.2a.pl QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB7.1) The documentation for package bzip2 is not installed. Reproducible: Always Steps to Reproduce: 1. Read /usr/share/doc/packages/bzip2/README. 2. Find the referenced documentation. Actual Results: 1. Complete documentation is available in Postscript form (manual.ps), PDF (manual.pdf) or html (manual.html). A plain-text version of the manual page is available as bzip2.txt. 2. Nope. Expected Results: 2. /usr/share/doc/packages/bzip2/manual.html -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 875373] New: systemd-tmpfiles-setup.service runs before all filesystems are mounted
by bugzilla_noreply＠novell.com 06 Nov '17

06 Nov '17

https://bugzilla.novell.com/show_bug.cgi?id=875373 https://bugzilla.novell.com/show_bug.cgi?id=875373#c0 Summary: systemd-tmpfiles-setup.service runs before all filesystems are mounted Classification: openSUSE Product: openSUSE Factory Version: 13.2 Milestone 0 Platform: Other OS/Version: openSUSE 13.2 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: systemd-maintainers(a)suse.de ReportedBy: suse-beta(a)cboltz.de QAContact: qa-bugs(a)suse.de Found By: Beta-Customer Blocker: --- - Factory, last updated yesterday - last known-working version: Factory from 2014-04-13 systemd-tmpfiles-setup.service runs before all filesystems are mounted. (Probably) since the change that makes /var/run a symlink to /run, the tmpdirs below /var/run can't be created on my system. Note: I have an encrypted /home partition, and /var is a symlink to /home/sys-var. This means /var becomes available after /home has been mounted. systemd-tmpfiles-setup.service should wait until _all_ filesystems are mounted. # systemctl status systemd-tmpfiles-setup.service systemd-tmpfiles-setup.service - Create Volatile Files and Directories Loaded: loaded (/usr/lib/systemd/system/systemd-tmpfiles-setup.service; static) Active: active (exited) since So 2014-04-27 11:44:45 CEST; 29min ago Docs: man:tmpfiles.d(5) man:systemd-tmpfiles(8) Process: 1491 ExecStart=/usr/bin/systemd-tmpfiles --create --remove --boot --exclude-prefix=/dev (code=exited, status=0/SUCCESS) Main PID: 1491 (code=exited, status=0/SUCCESS) CGroup: /system.slice/systemd-tmpfiles-setup.service Apr 27 11:44:45 geeko systemd-tmpfiles[1491]: Failed to create directory /var/run/samba: No such file or directory Apr 27 11:44:45 geeko systemd-tmpfiles[1491]: Failed to create directory /var/run/svnserve: No such file or directory [... and some more /var/run/* directories with similar error message ...] Apr 27 11:44:45 geeko systemd[1]: Started Create Volatile Files and Directories. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12