September 2014 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 632543] New: yast2-ftp-server/vsftpd: fails to start in standalone mode: listen_ipv6=YES
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632543 https://bugzilla.novell.com/show_bug.cgi?id=632543#c0 Summary: yast2-ftp-server/vsftpd: fails to start in standalone mode: listen_ipv6=YES Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: i686 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: opensuse-wagnerm(a)arcor.de QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 Vsftpd fails to run in standalone mode because of the following part of vsftpd.conf (if it has been configured via YaST2): # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! listen_ipv6=YES YaST2 adds "listen=YES" at the end of the file. See vsftpd's man page: listen_ipv6 Like the listen parameter, except vsftpd will listen on an IPv6 socket instead of an IPv4 one. This parameter and the listen parameter are mutually exclusive. Default: NO Reproducible: Always Actual Results: 500 OOPS: run two copies of vsftpd for IPv4 and IPv6 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 632530] New: libcanberra.so failing to connect to pulseaudio results in menu hangs in Firefox
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632530 https://bugzilla.novell.com/show_bug.cgi?id=632530#c0 Summary: libcanberra.so failing to connect to pulseaudio results in menu hangs in Firefox Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pgngw+dev001+novell.com(a)f-m.fm QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Firefox/3.6.8 as referenced @ https://bugzilla.mozilla.org/show_bug.cgi?id=567746 with Firefox ver >= 3.6.x on OpenSUSE 11.3, either native (@mozilla) or from repos (@opensuse), menu actions (@ toolbar, at bookmarks, @context menu, @ submenu ...) have a delayed response/action of ~5 secs -- if libcanberra is installed, but pulseaudio is missing: (1) no canberra, no pulseaudio ---> NO menu delay (2) with canberra, no pulseaudio ---> 5+ second menu delay (3) with canberra, with pulseaudio ---> NO menu delay it's been suggested that this is not an issue with firefox code, but rather with libcanberra code, and misselection of the optional pulseaudio dep instead of available alsa. i've provided debug info, stepwise reproducibility, etc @ the original bug. will provide add'l info here as requested -- i'm not sure what'd needed. a possibly (?) relevant comment @ #opensuse-gnome, <wolfiR> dev001: the delay happens with every menu action? <dev001> wolfiR: yes. @ toolbar, at bookmarks, @context menu, @ submenu ... <wolfiR> dev001: I see the difference with FF 3.5 <-> 3.6 that there is EVENT_MENU_POPUP in 3.6 which wasn't in 3.5 <wolfiR> dev001: that might explain the difference between both version [09:00] <wolfiR> dev001: still doesn't explain why it happens at all further referenced @ https://bugs.freedesktop.org/show_bug.cgi?id=29650 Sounds like a brokeness in OpenSUSE. ... this is not really a problem of libcanberra, nor of PA, and I am pretty sure it's just misconfiguration of opensuse. ... Please bring this to the attention of your distributor, thanks. [11:32] <mezcalero> ff is in no way special [11:33] <mezcalero> so it should be possible to reproduce this with canberra-gtk-play output as attachment -> https://bugs.freedesktop.org/attachment.cgi?id=37960 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33

[Bug 632271] New: [SDL] Segmentation fault when pressing on d-pad
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632271 https://bugzilla.novell.com/show_bug.cgi?id=632271#c0 Summary: [SDL] Segmentation fault when pressing on d-pad Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kamikazow(a)web.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 When I press on the d-pad of my game controller, any application that uses SDL immediately crashes with a segfault. Extreme TuxRacer prints: %%% etracer warning: joystick y axis mapped to axis 1 but joystick only has 1 axes Segmentation fault The bug seems to be the same or at least related to http://bugzilla.libsdl.org/show_bug.cgi?id=1041 Reproducible: Always # jstest /dev/input/js0 Driver version is 2.1.0. Joystick (PS2700 Rumble Pad) has 7 axes (X, Y, Z, Rx, Rz, Hat0X, Hat0Y) and 13 buttons (Trigger, ThumbBtn, ThumbBtn2, TopBtn, TopBtn2, PinkieBtn, BaseBtn, BaseBtn2, BaseBtn3, BaseBtn4, BaseBtn5, BaseBtn6, BtnDead). Testing ... (interrupt to exit) Axes: 0:-32767 1:-32767 2:-32767 3:-32767 4:-32767 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off 8:off 9:off 10:off 11:off 12:off -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 632250] New: /etc/at.deny has wrong account name www-data
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632250 https://bugzilla.novell.com/show_bug.cgi?id=632250#c0 Summary: /etc/at.deny has wrong account name www-data Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jens.herden(a)email.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 In /etc/at.deny is an account www-data but the account on Suse for Apache is wwwrun! www-data is the account on Debian-like systems. I have not checked the other accounts. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 631319] New: intel_hda: sound stutters, aplay buffer underruns, alsa wakes for no reason
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631319 http://bugzilla.novell.com/show_bug.cgi?id=631319#c0 Summary: intel_hda: sound stutters, aplay buffer underruns, alsa wakes for no reason Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: jslaby(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=383026) --> (http://bugzilla.novell.com/attachment.cgi?id=383026) pulseaudio -v output I have the three issues in summary, but I don't know if they are relative to each other. When I run wine, the sound played in games stutter and effects are played with delays. If I try to play with aplay, sometimes I get underruns like: underrun!!! (at least 494,491 ms long) Status: state : XRUN trigger_time: 1281894363.393273000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 underrun!!! (at least 495,794 ms long) Status: state : XRUN trigger_time: 1281894363.896136000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 underrun!!! (at least 493,886 ms long) Status: state : XRUN trigger_time: 1281894364.401600000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 Dmesgs says: [60023.911007] CE: hpet increased min_delta_ns to 128142 nsec [60026.921175] CE: hpet increased min_delta_ns to 192213 nsec [60076.712008] pulseaudio[13943]: segfault at 7f8e06c3f110 ip 00007f8e06c3f110 sp 00007fffc1e07c18 error 4 in pulse-shm-492800760[7f8e07265000+4001000] [61486.633938] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [61656.184323] hrtimer: interrupt took 3104637 ns pulseaudio sometimes says: ALSA woke us up to write new data to the device, but there was actually nothing to write! I have it only in Czech from logs: alsa-sink.c: ALSA nás probudila z důvodu zápisu nových dat na zařízení, ale ve skutečnosti nebylo co zapisovat. alsa-sink.c: S největší pravděpodobností se jedná o chybu v ovladači ALSA "snd_hda_intel". Nahlaste prosím tento problém vývojářům ALSA. alsa-sink.c: Probudilo nás nastavení POLLOUT - nicméně následné snd_pcm_avail() vrátilo 0 či jinou hodnotu < min_avail. ratelimit.c: 60 events suppressed ratelimit.c: 30 events suppressed This was 3 seconds after "IRQ timing workaround" was activated above. Then there are hundreds of "events suppressed" All the other information are hopefully in alsa-info: http://www.alsa-project.org/db/?f=2b8f40d47bc5a0ba3499ab5fdf2d8aa8ebe980f8 Note that there is PA: Running - No, but the info was probably taken while the PA process was not alive. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 631305] New: dhcrelay segfaults at first request
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631305 http://bugzilla.novell.com/show_bug.cgi?id=631305#c0 Summary: dhcrelay segfaults at first request Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andi-nbz(a)firstfloor.org QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); de; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 Simply configuring it to listen to a tap interface and forwarding to an external dhcp server: Aug 15 11:39:10 zeitgeber dhcrelay: Internet Systems Consortium DHCP Relay Agent 4.1.1-P1 Aug 15 11:39:10 zeitgeber dhcrelay: Copyright 2004-2010 Internet Systems Consortium. Aug 15 11:39:10 zeitgeber dhcrelay: All rights reserved. Aug 15 11:39:10 zeitgeber dhcrelay: For info, please visit https://www.isc.org/software/dhcp/ Aug 15 11:39:10 zeitgeber dhcrelay: Listening on LPF/tap0/ae:b8:8b:53:fe:7c Aug 15 11:39:10 zeitgeber dhcrelay: Sending on LPF/tap0/ae:b8:8b:53:fe:7c Aug 15 11:39:10 zeitgeber dhcrelay: Sending on Socket/fallback Request comming in: Aug 15 11:39:12 zeitgeber kernel: [41110.534756] dhcrelay[6641]: segfault at 0 ip 00007f3e759de20f sp 00007fff0822b680 error 4 in dhcrelay[7f3e759d1000+6d000] Running it under gdb gives Program received signal SIGSEGV, Segmentation fault. 0x00007ffff7f9f20f in do_relay4 (ip=<value optimized out>, packet=0x7fffffffcd40, length=<value optimized out>, from_port=<value optimized out>, from=..., hfrom=<value optimized out>) at dhcrelay.c:660 660 dhcrelay.c: No such file or directory. in dhcrelay.c (gdb) bt #0 0x00007ffff7f9f20f in do_relay4 (ip=<value optimized out>, packet=0x7fffffffcd40, length=<value optimized out>, from_port=<value optimized out>, from=..., hfrom=<value optimized out>) at dhcrelay.c:660 #1 0x00007ffff7fa7e80 in got_one (h=0x7ffff820d960) at discover.c:1393 #2 0x00007ffff7fd372b in omapi_one_dispatch (wo=<value optimized out>, t=0x0) at dispatch.c:520 #3 0x00007ffff7fa9e5a in dispatch () at dispatch.c:92 #4 0x00007ffff7f9f7ec in main (argc=<value optimized out>, argv=<value optimized out>) at dhcrelay.c:549 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 631263] New: yast2 printer doesn't set default when adding printer
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631263 http://bugzilla.novell.com/show_bug.cgi?id=631263#c0 Summary: yast2 printer doesn't set default when adding printer Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: batpul(a)gmail.com QAContact: jsmeix(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 When adding a new printer to the system with yast2 printer then yast2 doesn't set the default flag, and neither does it allow me to set this flag myself before it finishes. So I have to restart the yast2 printer module to edit the added printer to set the default flag. I would like to see that yast2 automatically enables the default flag for the first printer, or else give me an opportunity to set it myself before I click the OK button. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 630862] New: LXDM: can't login when space in password
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=630862 http://bugzilla.novell.com/show_bug.cgi?id=630862#c0 Summary: LXDM: can't login when space in password Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: LXDE AssignedTo: andrea(a)opensuse.org ReportedBy: lthuns(a)opensuse.org QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=382681) --> (http://bugzilla.novell.com/attachment.cgi?id=382681) output of lxdm.log User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Firefox/3.6.8 When user has a space in his password (like "pass word"), LXDM fails to login. Login on tty1 does work. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 630736] New: autofs: update 5.0.5 upstream patches to 2010-08-10
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=630736 http://bugzilla.novell.com/show_bug.cgi?id=630736#c0 Summary: autofs: update 5.0.5 upstream patches to 2010-08-10 Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: x86 OS/Version: openSUSE 11.3 Status: ASSIGNED Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: lchiquitto(a)novell.com ReportedBy: lchiquitto(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- AutoFS upstream maintainer pushed a new set of patches to address some issues, including: * remove extra read master map call * fix "fix cache_init() on source re-read" * fix error handing in do_mount_indirect() * expire thread use pending mutex * link against krb5 library by default * make "verbose" mode a little less verbose (bug #630719) Patch list (available in http://kernel.org/pub/linux/daemons/autofs/v5/) autofs-5.0.5-remove-extra-read-master-map-call.patch autofs-5.0.5-fix-fix-cache_init-on-source-re-read.patch autofs-5.0.5-fix-error-handing-in-do_mount_indirect.patch autofs-5.0.5-expire-thread-use-pending-mutex.patch autofs-5.0.5-include-krb5-library.patch autofs-5.0.5-make-verbose-mode-a-little-less-verbose.patch We should ship these patches with the upcoming openSUSE 11.4. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 630652] New: kernel module aha152x_cs.ko missing
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=630652 http://bugzilla.novell.com/show_bug.cgi?id=630652#c0 Summary: kernel module aha152x_cs.ko missing Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jens.herden(a)email.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 I want to use my SCSI scanner but the Adaptec PC Card 1460C does not work. It used to work in openSUSE 11.2 and before. Further investigations show that the needed module aha152x_cs.ko is not available anymore. I can not find it under /lib/modules and I am not able to find a package that contains the module. :-( pccardctl shows that the pc card itself has been found and I also see entries in the sys filesystem. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9