September 2014 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 851573] New: Second SATA drive extremely slow
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=851573 https://bugzilla.novell.com/show_bug.cgi?id=851573#c0 Summary: Second SATA drive extremely slow Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: hecht(a)biopsy.uni-jena.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 Intel DH77KC, i7, Plextor SSD, Seagate ST2000DM001 HDD Update openSuse 13.1 from 12.3 SSD fast as expected (ca. 450 MB/s), HDD extremely slow, test with hdparm -t shows Timing buffered disk reads: 2 MB in 5.70 seconds = 359.20 kB/sec changing of port to non 6GB/s -> same problem adding WD30EFRX to the second 6GB/s -> same problem for WD-HDD, but Seagate HDD shows full speed now (still on 3GB/s port) /dev/sdc: Model=ST2000DM001-9YN164, FwRev=CC4H, SerialNo=Z24051DJ Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=3907029168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=yes: unknown setting WriteCache=enabled Drive conforms to: unknown: ATA/ATAPI-4,5,6,7 * signifies the current active mode Timing cached reads: 30046 MB in 2.00 seconds = 15038.81 MB/sec Timing buffered disk reads: 488 MB in 3.00 seconds = 162.62 MB/sec With Knoppix 7.0.3 no problems at all, shows normal speed for all drives. Any Idea? Reproducible: Always Steps to Reproduce: 1. Switch on 2. Use hdparm -t on sdb 3. Actual Results: HDD speed about 200-400 kB/sec Expected Results: HDD speed about 180 MB/sec -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 809938] New: osuse12.3, can't acces to sd card with iso format partition
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=809938 https://bugzilla.novell.com/show_bug.cgi?id=809938#c0 Summary: osuse12.3, can't acces to sd card with iso format partition Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: epistemepromeneur(a)free.fr QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=530137) --> (http://bugzilla.novell.com/attachment.cgi?id=530137) how yast disk partition manager sees the sd card User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:19.0) Gecko/20100101 Firefox/19.0 with mandriva tool i created a bootable sd card (8 Gb capacity) containing the iso of opensuse 12.3 x86_64 (4,3 Gb) then i installed with it opensuse 12.3 kde then i insert the sd card then no notification from kde notifier then i launch yast disk partition tool then i go to sdd disk (the sd card) then i see what you can see with the joined capture sd_card_partitions.png for sdd1 partition i don't know if it is an error or not for sdd2 partion it's false. it's not a hpfs/ntfs partition but an iso partition with mandriva 2010.2 i586 kde notifier presents the sd card and i can access to the iso partition with dolphin the mandriva disk manager tool sees well the iso partition i will send a capture of what this tool displays Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 895542] New: Partitions on Intel RAID (ICH10) not considered by YaST
by bugzilla_noreply＠novell.com 08 Aug '16

08 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=895542 https://bugzilla.novell.com/show_bug.cgi?id=895542#c0 Summary: Partitions on Intel RAID (ICH10) not considered by YaST Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: Ulrich.Windl(a)rz.uni-regensburg.de QAContact: jsrain(a)suse.com Found By: --- Blocker: --- Created an attachment (id=605387) --> (http://bugzilla.novell.com/attachment.cgi?id=605387) YaST log directory as tar archive (bzip-compressed) User-Agent: Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Firefox/31.0 When trying to install openSUSE 13.1 on a system with an Intel RAID1 (ICH10), the existing partitions are ignored by YaST, so that the proposal overwrites existing partitions (like Windows). If you are not careful, you'll loose your data when installing! Reproducible: Always Steps to Reproduce: 1. Start to install openSUSE 13.1 on a system using Intel RAID (ICH10) Actual Results: Existing partitions are detected by the kernel, but are ignored by YaST Expected Results: Existing partitions should be displayed in YaST In openSUSE 12.3 YaST displays the partitions of the RAID and suggests to add new partitions, keeping existing partitions. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 823150] New: Network Manager applet does not show mobile broadband connection information.
by bugzilla_noreply＠novell.com 01 Aug '16

01 Aug '16

https://bugzilla.novell.com/show_bug.cgi?id=823150 https://bugzilla.novell.com/show_bug.cgi?id=823150#c0 Summary: Network Manager applet does not show mobile broadband connection information. Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: i586 OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: jcarricksmith(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=542576) --> (http://bugzilla.novell.com/attachment.cgi?id=542576) Annotated screen-shot showing where data is expected and output from lsusb for dongle User-Agent: Mozilla/5.0 (X11; Linux i686; rv:21.0) Gecko/20100101 Firefox/21.0 When the mobile broadband item for a connected service is clicked in the left panel of the Network Manager applet there is much information missing in the displayed information: 1. Connection State 2. Connection Speed 3. MAC address 4. Signal quality 5. Access Technology 6. The Traffic graph is not plotted although the Received: and Transmitted: data changes. 7. The Signal Strength bar at the top does not display anything. In version 11.4 I believe this data was present but I have not seen it in any of the 12.x series. The dongle in use is a Vodafone K3565 which appears to be a rebranded Huawei E220 device. I need to use this device in locations with poor coverage and being able to see its state and performance is exceedingly helpful. Reproducible: Always Steps to Reproduce: 1. Plug in mobile broadband dongle 2. Enable mobile broadband in Network Manager applet. 3. Connect to service. 4. Click to reveal service details. Actual Results: Service details not shown. Expected Results: Service details to be shown uname -a gives:- Linux jlin.site 3.7.10-1.11-desktop #1 SMP PREEMPT Thu May 16 20:27:27 UTC 2013 (adf31bb) i686 i686 i386 GNU/Linux openSUSE 12.3 as installed from promo DVD with all updates. Dell Inspiron 6400. Issue occurs with openSUSE Dark and openSUSE Air themes. Same issue occurred in 12.2 but not in 11.4 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 731071] New: devel:languages:python/python-python-daemon: Bug
by bugzilla_noreply＠novell.com 28 Jul '16

28 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=731071 https://bugzilla.novell.com/show_bug.cgi?id=731071#c0 Summary: devel:languages:python/python-python-daemon: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: 3rd party software AssignedTo: jmatejek(a)suse.com ReportedBy: mweseloh(a)gmx.net QAContact: opensuse-communityscreening(a)forge.provo.novell.com CC: speilicke(a)suse.com Found By: --- Blocker: --- Upstream has retracted version 1.6 several weeks ago, as that version was badly broken. Please revert back to current upstram version 1.5.5 http://pypi.python.org/pypi/python-daemon -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 608457] New: screen corruption when scrolling with window in the foreground
by bugzilla_noreply＠novell.com 28 Jul '16

28 Jul '16

http://bugzilla.novell.com/show_bug.cgi?id=608457 http://bugzilla.novell.com/show_bug.cgi?id=608457#c0 Summary: screen corruption when scrolling with window in the foreground Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Firefox AssignedTo: bnc-team-mozilla(a)forge.provo.novell.com ReportedBy: oneukum(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- If another window is in front of firefox's window, text exposed by scrolling firefox's window is corrupted. This happens only with firefox and regardless of what kind of window is in front. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 748666] New: Please split opencv so that gstreamer can use it
by bugzilla_noreply＠novell.com 26 Jul '16

26 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=748666 https://bugzilla.novell.com/show_bug.cgi?id=748666#c0 Summary: Please split opencv so that gstreamer can use it Classification: openSUSE Product: openSUSE 12.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: vuntz(a)suse.com QAContact: qa(a)suse.de Found By: --- Blocker: --- GStreamer now has a plugin for opencv. Unfortunately, enabling this means that this plugin brings as dependencies libqt4-x11 and libxine. It's a bit weird to have to drag a toolkit, and it's horrible to have a gstreamer plugin drag libxine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 865132] New: Postfix main.cnf had mailbox_command stripped
by bugzilla_noreply＠novell.com 23 Jul '16

23 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=865132 https://bugzilla.novell.com/show_bug.cgi?id=865132#c0 Summary: Postfix main.cnf had mailbox_command stripped Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andrew(a)acooke.org QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=579559) --> (http://bugzilla.novell.com/attachment.cgi?id=579559) output from save_y2logs User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:27.0) Gecko/20100101 Firefox/27.0 I was confusedly messing around with Yast network config (adding and then removing a bridge) when local mail delivery suddenly broke. Instead of mail messages being delivered to a local maildir via procmail, they were being delivered to the system mailbox. Looking at /etc/postfix, I saw that main.cnf had a modified date of today. When I diffed it with a daily backup, the mailbox_command parameter had been cleared. originally I had mailbox_command = /usr/bin/procmail but that had been changed to mailbox_command = Note - for some strange reason, this entry appeared TWICE in main.cnf. Both entries were consistent, in either case. So it would be more correct to say that originally I had it defined twice as procmail, and afterwards, it was cleared twice. Grepping for "postfix" in y2log, I see y2log:2014-02-21 11:26:04 <1> block(7737) [Ruby] network/runtime.rb:48 Updating sendmail and/or postfix configuration. which had the right date (and about the right time; by this point I had edited main.cnf and changed the timestamps, so I cannot check exactly). That message seems to be associated with changes made when I deleted the bridge in Yast (but decide yourself; I will include the logs). It seems that the "update" to postfix accidentally wiped important data. This is not good. Reproducible: Didn't try Steps to Reproduce: 1. Sorry, but I don't want to mess around with this system more than necessary. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 852604] New: Modify network config through yast messing up postfix config main.cf and master.cf
by bugzilla_noreply＠novell.com 23 Jul '16

23 Jul '16

https://bugzilla.novell.com/show_bug.cgi?id=852604 https://bugzilla.novell.com/show_bug.cgi?id=852604#c0 Summary: Modify network config through yast messing up postfix config main.cf and master.cf Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: HP OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: joerg.rohrer(a)upc-cablecom.ch QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:25.0) Gecko/20100101 Firefox/25.0 After i upgraded the OS via zypper dup from 12.3 to 13.1 the postfix config is screwed up after you modify something on the "network settings" through yast. I just disabled ipv6. Reproducible: Always Steps to Reproduce: 1. do a pseudo main.cf. put something under smtpd_recipient_restrictions 2. Start yast. disable or enable as example ipv6. 3. check main.cf. Actual Results: main.cf and master.cf are screwed up Expected Results: don't touch config files at all. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 546843] New: gkeytool lack a support for ECC certificates
by bugzilla_noreply＠novell.com 22 Jul '16

22 Jul '16

http://bugzilla.novell.com/show_bug.cgi?id=546843 User mvyskocil(a)novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=546843#c546468 Summary: gkeytool lack a support for ECC certificates Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: matz(a)novell.com ReportedBy: mvyskocil(a)novell.com QAContact: qa(a)suse.de Found By: Development gkeytool fails on read ECC certificate - this is also in openjdk, but the fix adds a support for Elliptic Curve Cryptography already exists in upstream, but I did not find similar for gcc java. I read a commit log, asked on #openjdk(a)irc.oftc.net, where many openjdk and gcj developers are, but noone answered me yet. see bnc#546468 for details about openjdk The java-1_5_0-gcj-compat fails on keystore creation: + for key in '/etc/ssl/certs/*.pem' + yes ++ basename /etc/ssl/certs/COMODO_ECC_Certification_Authority.pem + gkeytool-4.4 -import -keystore cacerts -file /etc/ssl/certs/COMODO_ECC_Certification_Authority.pem -storepass '' -alias COMODO_ECC_Certification_Authority.pem keytool error: java.security.cert.CertificateException error: Bad exit status from /var/tmp/rpm-tmp.cYvDZ9 (%prep) I'm going to workaround it in java-1_5_0-gcj-compat by skipping those certificates during keystore creation, to provide a fix immediately to make OpenOffice.org build immediately. But it'd be nice to have gcj with ECC support enabled. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4